Converting cassette to cd using garageband. Voice on cassette sounds like chipmunk. Is there a way to fix the speed during recording on garageband, so the voice sounds normal?

Librarian Asst. needs your help! Trying to preserve WWII veteran's interviews presently on cassette. However, on one cassette the voices sound like chipmunks (speed too fast during recording). I know how to transfer the cassette recording onto garageband. I just don't know how to transfer the recording at a slower speed, so that the voices will sound normal. Is there a way? Please help. Thanks.

You could try two things (sorry, I can only point you to the current settings in GB'11, since I no longer have GB '09) but it should be very similar.
The easiest thing would be, if the vocal transformers do work. You can change the pitch of a voice using a "Vocal Transformer" effect. Click the "Edit" tab in the "Info" panel and click an empty brick to add a filter:
If that does not work, try to change the timing of the track. Enable "Follow Tempo&Pitch". If GB '09 does not have "follow tempo & pitch", record your tape directly into a Real Instrument track in GB to record a purple region.
Use the tempo slider in the LED display to lower the tempo, till the recording does sound more natural.
Good Luck,
Léonie

Similar Messages

HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

Yes, purchase Paragon Camp Tune for the job.

Every time when Firefox is minimized and I tab into it I can't use it. It's completely locked. Is there a way to fix this?

Every time when Firefox is minimized to the tray and I open it up again i can't use it until I click on a tab that's not focused or on the search field with the mouse. It's completely locked, I can't press ctrl+1/2/3 etc to change tab or ctrl+e to go to search. Last time everything worked like it should was on release 3.5.14
Is there a way to fix this?
Edit: I've tried reinstalling Firefox and gotten a new profile, that didn't help.
Edit2: Updated to 3.6.9 and I still have the problem.
Edit3: Just installed 3.6.11, the problem is still there.
I can't understand how 3.5.14 can work and not a singel release after that.
Opera here I come, soon...

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
If still problem that indicates you have a bad headphone jack.
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Likely not worth it for your old 2G iPod
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

Using crop to change aspect ratio, but now is there a way to shift the footage without moving the cropped area?

Hi guys!
I'm new and not sure if this is the correct way to go about this. I am using the crop tool to achieve 2.35:1. But is there a way to transform my footage "beneath" the cropped area or do I always have to create a composition in AE and put a black bar layer on top?
Thanks in advance!

I would create the black bars in the title designer and put that on the highest video track of your sequence.

When I change the color using windows 7 color, I get a prompt to change back to firefox default or everything is very slow. Isn't there another way to fix the i

When I change the color using windows 7, apparently firefox runs slower. The videos I watch are spotty and looking like it's in slow motion. Sometimes I get a prompt to use firefox colors and this fixes it. But why can't I use other colors, and are there settings to help me fix this problem? Thank you for any information you can give me. Joyce

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
You can check for problems caused by recent Flash updates and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in Flash 11.3 and later
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting

I use my iPad Mini for giving speeches. Is there any way to keep the screen from going to sleep?

I should say, when I pause while someone else talks for a couple of minutes.

http://ipad.about.com/od/ipad_basics/ss/How-To-Delay-The-Auto-Sleep-Mode-On-The- iPad.htm
 Cheers, Tom

CONVERTING TAPES TO MP3 USING GARAGEBAND

HELLO I WAS WONDERING IF ANYONE KNOWS HOW TO CONVERT TAPE TO MP3 USING GARAGEBAND. I HAVE ALL THE EQUIPMENT:
TAPE DECK
AUDIO INTERFACE
COMPUTER
I JUST NEED HELP WITH SOFTWARE?

http://www.bulletsandbones.com/GB/FAQPages/RecordCassette.html

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1: Is there any way of fixing this? I've tried

Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7

Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7

Is there a way to change the addresses used in an existing iMessage thread?

This is kind of a multi-part question. Let me describe my scenario.
I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
So, the questions:
Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
Is there a way to change the address I send to when I make further replies to the conversation?
Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

I think I may have solved it, actually. I find that if I switch the timecode to NDF in the source viewer, it seems to work. I have tried it on three clips and they have sync'd without problems. Hopefully this will continue to be the case.

When I convert my file to excel it cuts off the first two columns, is there a way to fix that??

When I convert my file to excel it cuts off the first two columns, is there a way to fix that??

Hey Diann,
Please let me know whether you are using Adobe Reader or signed up at "https://cloud.acrobat.com/"
If you are using Adobe Reader, then try converting the file online and vice-versa.
Let me know.
Regards,
Anubha

MDS switch: DCNM: Is there a way to monitor the traffic on every port within a port channel using DCNM?

I am trying to monitor the load on an 8 port ISL between 2 MDS FC switches, on DCNM.
Since it is a plain trunk link, I am able to monitor the stats of every ISL port individually.
My question is, since port channel shows up as a single interface on DCNM, is there a way to monitor the per port utilization in that port channel?

Thanks for the update! If anyone else has the same question, the answer is that in order to extract the bus log information in the TDMS file, you should use the DIAdem Bus Log Converter tool. It is expected (though confusing) that the file looks mostly empty in the Data Portal until you use this tool to extract the information.
Also, this is a fantastic tutorial from a very bright engineer on how to correlate data from multiple sources, such as raw frame files, in DIAdem. Highly recommended reading. It also has some data on the bus log converter.
Jarrod S.
National Instruments

I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

I've just updated my Macbook to Mavericks and all my .avi files storaged in a Lacie Rugged aren't opening but converting one by one I opened; are they not compatible?. Is there a way to converting all of them simultaneously and faster? Thanks a lot guys

Have you tried using VLC media player it seems to play almost any codec without converting.
https://www.macupdate.com/app/mac/5758/vlc-media-player

Is there a way to open the mic using apple remote desktop

Is there a way to open the mircophone channel using Apple Remote Desktop so I can listen on anything thats happening at my computer at home? If not is there another software that would work?
Also is there a way to use apple's software to control and watch a PC?

Is there a way to open the mircophone channel using Apple Remote Desktop so I can listen on anything thats happening at my computer at home? If not is there another software that would work?
You would have to launch software that would accept audio from the microphone and transmit it to you in some fashion. ARD does not transmit audio itself. Another remote control solution such as Timbuktu might transmit audio, so you could look into that, perhaps.
Also is there a way to use apple's software to control and watch a PC?
You can install a VNC server on the PC and ARD can then take control of the system. It can be tricky to find a VNC system that will work with ARD, though, so search this forum for "VNC" for possible options. One of the applications that support Microsoft's remote desktop architecture such as their own Remote Desktop Connection Client for Mac or iTap Mobile RDP will probably work better, though.
Regards.

Is there a way to open the notification pane using magic mouse?

Is there a way to open the notification pane using magic mouse? i mean it would be great if i could two finger swipe to the right for the notification pane (two finger swipe left opens dashboard)
I have Magic Prefs if it helps

It doesn't seem like this is possible in 10.9.1. Can someone at Apple confirm or provide a solution?

Is there a way to get the voice memos from my iPhone on to my pc?

Is there a way to get the voice memos from my iPhone on to my pc?

See http://www.tech-recipes.com/rx/6403/iphone-transfer-voice-memos-from-iphone-to-c omputer/.

Converting cassette to cd using garageband. Voice on cassette sounds like chipmunk. Is there a way to fix the speed during recording on garageband, so the voice sounds normal?

Similar Messages

Maybe you are looking for