Copy and paste data

Hello,
I am having a problem with an excel file. The aim of the work is to separate my data into different boxes using VBScript(from box 1 to 8)in order to have different data channels (for example:the animals of box 8, the animals of box 6, the consumptions of box 5...)
I thought about using "if...then..." Sentences and "CHD" or "CHDX" variables instead of using "DataBlClpCopy". But I can't get my way.
When I tried to use "DataBlClpCopy" I found the trouble that I had to say the starting row number in the channel and the number of channel values to copy. The problem is that each excel file will have different row numbers and different values to copy.
Does anyone have any idea?
Thank you
Attachments:
values.xls ‏451 KB

Hello,
The solution to the situation is to programmatically parse the data to dynamically determine what rows correspond to which boxes. I have taken the liberty of writing a VB script for you to use that will do just that. For each box, it creates a new group with the same channel names and populates them with the data for just that box. Take care!
Regards,
Aaron B.
National Instruments
Attachments:
Parse and Copy.zip ‏1 KB

Similar Messages

Can no longer copy and paste data from CD to disk

For the last little while, I can no longer copy (right-click > Copy "DATA CD") and paste (right-click > Paste Item) a data CD to a drive.
i keep getting the error "This operation cannot be completed because you do not have sufficient privileges for some of the items."
This is whether I attempt to copy to system drive (Desktop) or volumes which have their permissions ignored.
Thanks,
jim
Dual 2.0 G5 Mac OS X (10.4.4)

Never mind. Apparently there was something going wrong with the Finder. I ran Onyx, and things are back to normal now. I was concerned because I actually saw similar but not identical behavior on two Leopard machines. Running Onyx on the 2nd one now.

What is the Best way To Copy and paste data from 1 book to another

I have 18 sheets in 5 different books that I want to extract data from specific cells. What is the best way to do this? Example: 1 sheet is called Numbers E-O1 data in 13:WXYZ. The data updates and moves up 1 row every time I enter
a new number. So let's say I enter the number 12. Through a lot of calculations the output goes in 13:WXYZ. To what I call a counter which is a 4 digit number. Anyways, how can I send that 4 digit number to a totally different sheet? To bullet
what I'm talking about
data in cells Row 13:WXYZ in book called Numbers sheet E-O1
send data to book called "Vortex Numbers" Sheet E-O row 2001:CDEF
What formula or Macro can I use to make this work?
thank you!

Hello Larbec,
Syntax:
'[BookName]SheetName'!Range
Enter in cell 2001:CDEF:
='[Numbers]E-O1'!13:WXYZ
This assumes that the file is open in Excel. Otherwise you need to add the path:
'ThePath[BookName]SheetName'!Range
Best regards George

Copy and paste buffers not working correctly in iOS 8.1m

Both iPads2's in my family arsenal are exhibiting what I believe to be a bug in the iOS8.1 (perhaps corrected by 8.1.1?), in the cut/copy & paste buffer stack.
When invoking the operation to copy and paste data from one application to another, the paste action consistently selects the previous (e.g., stack level 2 rather than 1 or Top) data as what is to be pasted.
In other words, if you have used the copy and paste routine twice, the second pasting will supply one with the paste data from the first operation, rather than the desired data from the second copy and paste operation.
Copy and paste appears to work correctly from within a single application, but consistently fails when copying data from one application to another.
Does anyone know of a work-around for this bug? Is it a bug that others have identified? Is there a new selection filter menu option for copy and paste operations, and what method is used to invoke the menu?
I hope this is addressed soon, as I use Cut/Copy & Paste operations extensively (I've already had Carpal Tunnel Release surgery once and don't relish a repeat performance, no matter how successful the first was in correcting the damage).
Any clues as to what's going on here?
thanks in advance,
labernache

All you can do is simply see if iOS 8.1.1 helps you with this. With some people it has, and others it has not. I would also recommend doing a clean install of your system, too.
Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

Copy and Paste from an excel spreadsheet to a JTable

Hi,
does someone know how to copy and paste data from an excel spreadsheet to a JTable. It seems like copy and paste do not fuction from an to a JTable.
Thanks, Fred.

Take a look at an example included in my bug report link shown below:
http://developer.java.sun.com/developer/bugParade/bugs/4748394.html
;o)
V.V.

Copy and Paste from Excel to Applet

Hi,
I'm having a problem with trying to copy and paste data from Excel to an Applet (JTable). The copy and paste works fine when I run the standalone applet, but when it's embedded into a HTML page and placed in an app server, it would not recognize what's on the clipboard, so nothing gets pasted. Any ideas?
cheers,
Andrew

My guess is that you get an security exception. An applet has to by signed to enable cut & paste with excel.
For more info on signing applets: http://personal.vsnl.com/sureshms/javasign1.html

How to copy and paste the data directly from the excel to the PDF?

hi,
I have found the same question on the link:
How to copy excel sheet to pdf form?
But I didnt get my answer through that forum.
My requirement is dat I should copy the data from excel sheet and directly paste it to PDF form.
When I am trying to copy and paste ..all the data is getting pasted into a single block only.
Kindly help.
Thanks & Regards,
Lina

So you want the user/person to do the "cut&paste" action (ie. ctrlc ctrlv) and have the data paste itself across rows correctly much like Excel does. I don't think this "intelligence" is built into Adobe table controls as it is in Excel (and Excel is smart enough to even handle it different ways depending on how the user selects cells).
The only thing I can think of is that you could "capture" the user trying to paste into a cell/row in your table (maybe in the onFocus or onClick events), then grab the data, parse it out (but looking for some character) and then have your code distribute the data across the rows. However, I personally think that would be a lot of overkill and prone to other issues and errors.

I want to move all my email data over the past several years from one yahoo account to another. I am told that I can use Thunderbird to copy and paste . How?

I wish to close down one email account but have no time to indivuidaully send emails out piecemeal to my newly set-up email address/account.
I want to keep the same InBox and Sent data columns as I have always had with dates associated with each email.
I was told that setting up Thunderbird to deal with emailing can facilitate this copying and pasting between two accounts.
Once done I wish to close my first email account ( its unfortuneately contractually linked to my old iphone 4 and I have changed cell phone companies so I am still keeping that account alive while I sort out how to move my data out into my new email account) and stick to using the new account.
Both are yahoo.co.jp email accounts. Yes, I live in Japan.
The Thunderbird program seems to have accessed and stored all of my email data . It did so quickly.
Please advise what to do next.
Thanks
JW

two ipods wrote:
I have my husband Iphone and an Ipad on one account. I have my own phone on another account. I want to move the Ipad from my husbands account to my account so I can purchase him an Ipad2 and I can use the old one with all the settings and apps as they are now and then update with my contact information.
How do I do this?
He will run into a problem when he wants to use his own account. Some apps will have been purchased on one Apple ID and other apps will have been purchased on a different Apple ID. That's a nuisance situation when the apps need updating and, unfortunately, there is no resolution at the present time (IDs can not be combined).

How to disable copy and paste in a field and allowing user to key in the data in that field...

Hi all,
I need your help on the below scenario.
I have to stop user to copy and paste the data into the field. But allowing user to enter the data in that field.
Please suggest.
Thanks and Regards,
Thiru.

Hi thiru
It sounds like you want a to write a PJC component to extend a forms text item that will capture and eliminate the key strokes and mouse actions used to copy and past thus preventing a user from performing this action. There are many examples on the interent of how this can be written e.g. the Oracle Forms PJCs/Java Beans web site. You will need to have jdeveloper to write thise bit of code. Oracle forms also has a tutorial on how to plug the JAR file you generate into your for sessions.
Regards
Quintin

APEX Bug: Web Sheets - Data Grid Copy and Paste

In Web Sheets:
Create Data Grid > Copy and Paste
Upload this data set (copy and pasted from Excel 2007):
A     B     C
1     2     3
4     5     6This will create a data grid with three columns (A, B, and C).
Upload this data set (i.e. in the 2nd row of data, B and C don't contain any values):
A     B     C
1     2     3
4This will create a data grid with only 1 column, A. B and C were not created.
Oracle XE
APEX 4.0.2
Martin
http://www.talkapex.com

Hi Martin ,
I tried the same thing which u said n its working Perfectly fine .
I m getting all the columns & both the rows along with data .
Regards,
Nandini Thakur.

Copy and paste excel data into database

We have moved from the oracle7.3.x and forms4.5 to oralce8i and forms 6? In the 7.3 and 4.5 enviroment being accessed via a terminal emulator, we were able to copy and paste into the fields for input. by using escape sequences
eg.
=CHAR(27)&"OP"     =PF1
=CHAR(27)&"OQ"     =PF2
=CHAR(27)&"OR"     =PF3
=CHAR(27)&"OS"     =PF4
=CHAR(27)&"[1~"     FIND
=CHAR(27)&"[2~"     INSERT HERE
=CHAR(27)&"[3~"     REMOVE
=CHAR(27)&"[4~"     SELECT
=CHAR(27)&"[5~"     PREV PAGE
=CHAR(27)&"[6~"     NEXT PAGE
=CHAR(27)&"[A"     UP
=CHAR(27)&"[B"     DOWN
=CHAR(27)&"[C"     RIGHT
=CHAR(27)&"[D"     LEFT
=CHAR(13)     RETURN
Is there a way now that we are using the Jinitiator applet to connect to our data base (three teir stucture)
Wayne Chang

Hi Sharon,
Did you ever get an answer to this issue? Everyday I hear from users of the forms i create, that they would like to be able to copy cells from an excel workgroup and paste them into the table of a form. I have even had people refuse to use my forms just because they cannot do this.

When I copy and paste from an online chart, some cells that had dashes or hyphens in them in the online chart paste into Numbers cells as dates, e.g., 12-13 pastes as Dec. 13, 2012.

When I copy and paste from an online chart, some cells that had dashes or hyphens in them in the online chart paste into Numbers cells as dates, e.g., 12-13 pastes as Dec. 13, 2012. I have tried changing the cell formats for that column from "automatic" to "text", but that doesn't fix it. Is there a way to copy/paste this information without changing the original characters?

If you know how many rows/columns you are planning to paste, then make the table that big BEFORE you paste. In addition select all cells in the table by selecting any cell, then type the key combination <COMMAND>+a (for select all.
Then use the cells inspector to make the cells formatted as text:
I hope this helps

Tcode for copying and pasting cofiles and data.

Hi,
i doing transport manually means going in se09 in qa and released and copied and pasted the cofiles and data request numbers from qa to prod then i imported the request number. but is it possible for doing copying and pasting cofiles and data through tcode rather than doing maually.help me plz.

Hi Raj
If you want transport tp requests manually.
you just login your quality system
and go to command prompt
then use this commends
add to buffer all qid pf=your profile path of your qa system
if you want single import
tpimport requestnumber targetsid clientnumber pf=targetprofile path
if you want mass import
tpimport all targetsid clientnumber pf =target profile path
Regards
Bandla

Copy and Paste Vector Data

Is it possible to copy and paste vector data from one anchor point to another?

See the pair of scripts here named JET_HandlesCopy.jsx and JET_HandlesPaste.jsx.
JET

Help writing a excel macro to do a copy of 4 cells and paste transpose. I need to loop the copy and paste through 6900 rows of data.

I need help writing a excelmacro to do a copy of 4 cells and paste transpose. I need to loop the copy and paste through 6900 rows of data. I started the macro with two rounds of copying & paster transposed but I need help getting it
to loop through all rows. Here is what macro looks like now.
    Range("I2:I5").Select
    Application.CutCopyMode = False
    Selection.Copy
    Range("J2").Select
    Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
        False, Transpose:=True
    Range("I6:I9").Select
    Application.CutCopyMode = False
    Selection.Copy
    Range("J6").Select
    Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
        False, Transpose:=True
End Sub

Thanks Jim for the solution above.
Hi Brogents,
Thanks for posting in our forum. Please note that this forum focuses on questions and feedback for Microsoft Office client. For any
VBA/Macro related issues, I would suggest you to post in the forum of
Excel for Developers, where you can get more experienced responses:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Copy and paste data

Similar Messages

Maybe you are looking for