COPY command with Transparent Gateway

We have tried to use copy command to copy the data from AS/400 database (tns name as AS400) to Oracle database (Data2) in NT thru Transparent Gateway. The following works using INSERT statement:-
INSERT INTO EMP select * from scott.emp@as400
But when we use COPY command it returns:
COPY FROM scott/tiger@as400
INSERT EMP
USING select * from scott.emp@as400
Error:ORA-03113 end-of-file on communication channel.
When we use the copy command to copy from Oracle back to AS400 to Transparent Gateway. It does not work and return
"Oracle SQL*Plus:SQLPLUSW.exe - Application Error The instruction at "0x63223160" referenced memory at "0x77f64e1f" The memory could not be written"
null

Other than those problems, do you really want to use COPY? It takes the data on a network trip to SQL*Plus and then to the destination server. Maybe CREATE AS SELECT will be more efficient.
- CJ

Similar Messages

Trouble with Transparent Gateways Samples

Hi,
I have successfully installed and configured the gateway for Microsoft SQL Server on my database. Following the case studies come with the gateway installation for Microsoft SQL Server demonstration, I have no problem running case 1 through case 6. But I couldn't make the case 7 to work. Following are the errors:
Table dropped.
Table created.
no rows selected
DECLARE
ERROR at line 1:
ORA-00942: table or view does not exist
[Transparent gateway for MSSQL]
ORA-06512: at line 4
no rows selected
What am I missing? Any special things I need to do in order to call a procedure on SQL Server? Thanks for any help.
Jun Zhang

Oracle is not case-sensitive, but many other databases are. Check to make sure the GetDept procedure exists on the SQL Server side. The name must match exactly. If it does not, (for example, it is Getdept), you will need to modify the sample code accordingly.
There are also some comments in the , such as "Output parameters of stored procedures must be initialized to an empty string." and "...the procedure's access privileges must permit access by the gateway." So, it is possible this generic code does not work for SQL Server, and needs to be adjusted slightly. Try this:
DECLARE
DNAME VARCHAR2(14);
BEGIN
DNAME := NULL;
"GetDept"@GTWLINK(10,DNAME);
INSERT INTO LOCAL_GTW_DEPT VALUES (10, DNAME);
END;

Copying images with transparency produces a black background.

When images are copied from Firefox and pasted elsewhere (Paint, PSP, Photoship, etc.) any transparency becomes opaque black. This makes it difficult to edit the image if the transparency was near black pixels. Is there any way to change the colour to something else, or at least, white?

No, you will have to save the image to disk and open the file in your image editor. You can try if it works if you drag the file in the editor.

How can i run oralce copy command with in sql j code [urgent]

I try it but it give me error inavalid sql command etc
i need help urgent

http://www.oracle.com/technetwork/database/enterprise-edition/calling-shell-commands-from-plsql-1-1-129519.pdf

Problem with sqlplus copy command

When I try to use the SQLPlus Copy command (with Append or Insert action) with a 8.1.7 source DB and a 9.2.0.4 destination DB, I receive the "CPY0006: Select list has more columns than destination table" error.
The tables are identical in both DBs so I am confused.
Just to make sure the tables were identical, I then used the Copy command with the Create option and used a new table name.
That worked, however if I then try to use the Copy with an Insert or Append action against the table I just created, I get the error again.
I am using SQLPlus 8.1.6.0.0
Output from SQL*Plus:
NTEG> SET COPYCOMMIT 40;
NTEG> SET ARRAYSIZE 1000;
NTEG> COPY FROM xxxxx/xxxxx@nteg -
TO xxxxx/xxxxx@DEV -
INSERT sysadm.PS_ANIMAL_TBL -
USING select * FROM sysadm.PS_ANIMAL_TBLArray fetch/bind size is 1000. (arraysize is 1000)
Will commit after every 40 array binds. (copycommit is 40)
Maximum long size is 80. (long is 80)
CPY0006: Select list has more columns than destination table
Descr from both DBs
NTEG> descr ps_animal_tbl
Name
ANIMAL_CD
DESCR50
DESCRSHORT
DEV> descr ps_animal_tbl;
Name
ANIMAL_CD
DESCR50
DESCRSHORT

SQL> help copy
COPY
COPY copies data from a query to a table in a local or remote
database.
COPY {FROM database | TO database | FROM database TO database}
APPEND destination_table
[(column, column, column, ...)] USING query
where database has the following syntax:
username[password]@connect_identifier
SQL>
Joel P�rez

Help Configuring Transparent Gateway for Ms Sql Server

I have Installed Oracle 9.2.0.1.0 with Transparent Gateway for Ms Sql Server.
Followed the configuration furnished therein the Documents for Tnsnames.ora & Listener.ora.
Connection to Sql Server 2000 is NOT SUCCESSFUL. Trace File contents from Tg4sql is furnished below :
Oracle Corporation --- WEDNESDAY DEC 18 2002 22:32:50.625
Heterogeneous Agent Release
9.2.0.1.0
HS Agent diagnosed error on initial communication,
probable cause is an error in network administration
Network error 2: NCR-00002: NCR: Invalid usage
Note :- Sql Server & Oracle Server are on the same Machine running of Windows 2000 Server.
Am i missing something !!!
TIA

Please guide me, would appreciate your suggestions to solve this heck....
TIA

Copy command looses default values

Hi,
I have got a problem with the COPY command. I just want to copy the data in a very fast way to copy from one remote database to another one. I suggested that it would be the fastest way to use the copy command.
insert into (select * from dblink) has been to slow
The problem is that the copy command with REPLACE replaces the table, drops the indexes, trigger AND the default values!!!!!!
Is there a possibility to solve this problem? Or is there another way to load the data in a very, very fast way?
Thank you very much
Henrik Rünger
Consultant | OCP
ckc ag | www.ckc.de

It sounds like the destination table already exists. What about doing
a DELETE to clean up the destination table and then using COPY INSERT?
COPY may or may not be fast depending on a range of things. With
COPY, all the data gets moved across the network from the source DB to
SQL*Plus and then across the network again to the destination DB.
What about export/import or the new 10g "datapump"? See
http://otn.oracle.com/obe/obe10gdb/integrate/datapump/datapump.htm
-- CJ

Ora-12154 problem with database link and transparent gateway

Hello,
I’m trying to make a communication between oracle and SQL server 2005.
I use oracle 10g E.E Release 10.2.0.3.0 and the transparent gateway for SQL server 10201_gatway_win32.zip.
Install:
The oracle database is installed into a server named ss-serv. This server has two partition disk C and E. Oracle database is installed in E and the gateway in C. There is already a database (instance) running in the oracle home (in E).
I configured the gateway as described into: http://download.oracle.com/docs/cd/B...3/conf_sql.htm.
In sql server 2005, there is a database running named ClientTricks.
I created a user named Avogadro with a login.
In the partition C where the gateway is installed, the file inittg4msql.ora is like this:
HS_FDS_CONNECT_INFO= ss-serv. ClientTricks
The file sqlnet.ora where the gateway is installed is configured like this:
SQLNET.AUTHENTIFICATION_SERVICES=(NTS)
NAMES.DIRECTORY_PATH = (TNSNAMES, EZCONNECT)
I configured the listener that is in the C partition where the gateway is installed, and the tnsnames that is in the oracle database in E partition disk like this:
Listener :
LISTENER=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=ss-serv)
(PORT=1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=tg4msql)
(ORACLE_HOME=C:\oracle\product\10.2.0\tg_1)
(PROGRAM=tg4msql)
tnsnames:
mytg4msql=
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=TCP)
(HOST=ss-serv)
(PORT=1521)
(CONNECT_DATA=
(SID=tg4msql))
(HS=OK))
After edited the listener, I stop and start the listener for the transparent gateway from administrative tools in the services.
Then, connected in oracle (in a database named fakeclient) I created a database link in sqlplus.The the dblink were created, but when I tried to querry some data from ClientTricks by executing the following instructions:
select * from s_client@dblink
i got this fatal and terrible error :
ora-12154 TNS:could not resolve the connect identifier specified
I verified all my procedure and stapes, all seems to be good. I did a tnsping of mytg4msql
I got this error in the command prompt:TNS-03505 fail to resolve name
Could someone help me ?
Sorry for my English ,I’m French
best regards

Hi Mkirtley,
i clarify you what i've done:
Pease have a look in the link in my first post. Then, i said that in oracle database home the listener is in port 1521
here is this listener:
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtproc)
(ORACLE_HOME=E:\oracle\production\10.2.0\db_1)
(PROGRAM=extproc)
LISTENER=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP)(HOST=ss-serv)(PORT=1521))
(ADDRESS= (PROTOCOL=IPC)(KEY=EXTPROC0))
Here is the tnsnames.ora in oracle database home:
N.B in this ora file, there's already some descriptions for the database running, so i just add these lines under the description in ora file.Here is:
Jest=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=ss-serv)(PORT=2000))
(CONNECT_DATA=
(SID=tg4msql)
(HS=OK)
for the listener of the gateway (installed in C partition):
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=tg4msql)
(ORACLE_HOME=C:\oracle\production\10.2.0\tg_1)
(PROGRAM=tg4msql)
LISTENER=
(DESCRIPTION_LIST=
(DESCRIPTION=
(ADDRESS= (PROTOCOL=TCP)(HOST=ss-serv)(PORT=2000))
(ADDRESS= (PROTOCOL=IPC)(KEY=EXTPROC1))
here are all i did.
Best regards

A question about transparent gateway,sb help me plz!!

hi all:
i met a problem while trying the transparent gateway for ibm drda
1.i have the listner.ora configured like this:
=================================================================
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = felix)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = tg4drda)
(SID_NAME = TEST)
(ORACLE_HOME = E:\oracle\oradrda)
=================================================================
2.and the tnsnames.ora configured like this:
=================================================================
TEST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.18.10.11)(PORT = 1521))
(CONNECT_DATA =
(SID = TEST)
(SERVER = DEDICATED)
(HS = ok)
(HS = OK)
=================================================================
3.and the initTEST.ora configured like this:
=================================================================
set DRDA_CONNECT_PARM=localhost:446
DRDA_REMOTE_DB_NAME=test (database name of db2)
=================================================================
then i log on as user system and create a database link dblink1.But when i try the sql statment "select * from t1@dblink1"
such error came up:
# ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
#ORA-02063:preceding 2 lines from dblink1
somebody help me plz,tell me how to deal with such a problem,thanks a lot!!!
Best regards!

Hi Felix,
Please take a look at note 234517.1 on metalink (copied below).
This note explains how to resolve the following error messages when using Transparent Gateways or Generic Connectivity:
ORA-3113; ORA-2019; ORA-2085; ORA-12154; ORA-28545; ORA-28546; ORA-28509; ORA-942; ORA-904; ORA-28500;ORA-28528
SCOPE & APPLICATION
This note should help to solve common error messages when using generic
connectivity or gateways.
Common errors with gateways or generic connectivity
Here are the English descriptions of each error; to compare your message
with the message below, you can alter your current SQL*Plus session
and compare your message with the messages listed in this note:
alter session set nls_language=american;
ORA-3113:
SQL> connect system/manager@tg4msql;
ERROR:
ORA-03113: end-of-file on communication channel
Resolution:
You can't connect with SQL*Plus directly to the foreign
data store. HS or Gateways are only designed to work with
a database link from an Oracle database to the foreign
data store
ORA-2019:
SQL> select * from all_catalog@demo;
select * from all_catalog@demo
ERROR at line 1:
ORA-02019: connection description for remote database not found
Resolution:
Create a database link to connect to the foreign database
create [public] database link <db link name>
connect to <user of the foreign datastore>
identified by <password of this user>
using '<SQL*Net ALIAS>';
For case sensitive usernames/passwords of foreign databases,
surround the user and password with double quotes.
create [public] database link <db link name>
connect to "<user of the foreign datastore>"
identified by "<password of this user>"
using '<SQL*Net ALIAS>';
ORA-2085:
SQL> select * from all_catalog@tg4msql_v91;
select * from all_catalog@tg4msql_v91
ERROR at line 1:
ORA-02085: database link TG4MSQL_V91.DE.ORACLE.COM
connects to HO.WORLD
Resolution:
This problem is related to GLOBAL NAMES.
The simplest way to disable global naming is to alter
the current session.
alter session set global_names=false;
The other solution is to add a global_name to the
gateway/hs:
HS_DB_NAME = <datasource>
HS_DB_DOMAIN = <DOMAIN>
But the HS_DB_NAME must not exceed 8 characters and
must not contain any extra characters. If this is not
possible, the globale naming can be disabled by setting
GLOBAL_NAMES = FALSE in the init.ora of the database
as well
ORA-12154:
SQL> select * from all_catalog@demo;
select * from all_catalog@demo
ERROR at line 1:
ORA-12154: TNS:could not resolve service name
Resolution:
The database link uses a SQL*Net alias not specified
in the TNSNAMES.ORA of the database server.
Query the data dictionary to figure out the 'HOST'
specified for the database link:
select db_link, host from user_db_links;
or
select db_link, host from dba_db_links;
The 'HOST' value is the alias of the SQL*Net.
Please make sure it exists in the TNSNAMES.ORA file
present at the Oracle database server.
ORA-28545:
SQL> select * from all_catalog@demo;
select * from all_catalog@demo
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
NCRO: Failed to make RSLV connection
ORA-02063: preceding 2 lines from DEMO
Resolution:
There's something wrong with the SQL*Net connection:
- checking the SQL*Net -> Listener configuration with TNSPING:
tnsping <SQL*Net alias>
TNS-12545: Connect failed because target host or object
does not exist
The HOSTNAME specified in the TNSNAMES.ORA is invalid
Try with the OS ping to resolve the hostname / IP adddress
TNS-12541: TNS:no listener
The hostname specified in the listener.ora points to a
machine without an Oracle listener, the listener on that
machine is not running or the port number is wrong.
NO ERROR with TNSPING:
This might be caused by an invalid SID configuration.
Please make sure, that the SID in the listener refelects the
SID specified in the TNSNAMES.ORA. Make sure you don't mix
SID syntax with SERVICE_NAME syntax.
If everything is configured well, please make sure that
lsnrctl status shows at least one service handler for
hsodbc. Probably restart the listener AFTER changing
the listener.ora file.
Still no error found, then please enable listener tracing
(level support) and have a look at the listener.trace file
after retrying the same select statement again.
In the file you should see the connect from the Oracle
database to the listener. After a few lines you should see that
the listener tries to open 2 pipes. Does this work or does it
fail and again a few lines later you see a hex/ascii block that
conatins an error stack like:
ERR=12500, CODE=12500, EMFI=4, CODE=12560, EMFI=4?
Then please check again the listener.ora file; is the
ORACLE_HOME directory specified within the listener.ora file
correct? Or if you are using environment variables in the
listener.ora please replace them with absolute paths.
ORA-28546
CAUSE 1:
SQL> select * from all_catalog@demo;
ERROR at line 1:
ORA-28546: connection initialization failed, probable Net8 admin error
ORA-02068: following severe error from DEMO
ORA-03113: end-of-file on communication channel
Resolution:
This error might be caused by a misplaced 'HS=' or 'HS=OK' key
word in the tnsnames.ora.
Make sure HS= or HS=OK is present and that the SID Connect String
looks like:
(CONNECT_DATA =
(SID = tg4msql)) <= there are 2 closing brackets! The HS
(HS=)) <= key word is OUTSIDE of connect_data
CAUSE 2:
SQL> select * from all_catalog@test;
ora-28546: connection initialization failed, probable net8 admin error
ora-29511 lost rpc connection to heterogeneous remote agent SID ...
ora-02063 preceding 2 lines from test
Resolution:
This behaviour can be found in situations with a version missmatch.
For example the Oracle database is release 9.2.0.4 and the gateway
itself 9.2.0.1
=> The fix is to apply the same database patchset (gateway patches
are part of the database patchsets) to the gateway home as well;
or if the gateway 9.2.0.1 was installed into a 9.2.0.4 database
directory to reapply the database patchset.
ORA-28509:
Older gateways report this error instead of giving a
deltailed error description.
Resolution:
This error indicates the same as the errors described above.
They can be solved by checking the SQL*Net configuration
for the gateway / generic connectivity setup.
ORA-942:
SQL> select irgendwas from demo@demo;
select irgendwas from demo@demo
ERROR at line 1:
ORA-00942: table or view does not exist
...(the text here depends on the library/odbc...
ORA-02063: preceding 2 lines from DEMO
Resolution:
make sure the table exists in the foreign data store.
Pay attention that some foreign data stores are case
sensitive and thus the table_name must be surrounded
by double quotes.
ORA-904:
SQL> select irgendwas from "demo"@demo;
select irgendwas from demo@demo
ERROR at line 1:
ORA-00904: "IRGENDWAS": invalid identifier
Resolution:
Make sure the column name specified exists at the foreign
table and if it is case sensitive, surround it by double quotes.
ORA-28500:
CAUSE 1:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned
this message:
[Generic Connectivity Using ODBC][H006] The init parameter
<HS_FDS_CONNECT_INFO> is not set. Please set it in init<orasid>.ora
file.
ORA-02063: preceding 2 lines from HSODBC
Resolution:
The connect information to the remote database or the ODBC DSN is not
found. Add the proper connect string required by the gateway or hs/
generic connectivity agent.
CAUSE 2:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
ORA-28541: Error in HS init file on line 11.
ORA-02063: preceding 2 lines from HSODBC
Resolution:
The init.ora of the gateway / generic connectivity contains an
invalid parameter in line 11
CAUSE 3:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: errors.h (2005): ;
[Microsoft][ODBC SQL Server Driver][SQL Server]Error authenticating user
'sa'. (SQL State: 00000; SQL Code: 18456)
ORA-02063: preceding 2 lines from HSODBC
Resolution:
The username password for the database link is wrong or no connect
information was specified.
Make sure that for case sensitive usernames/passwords the create
database link statement contains the double quotes for the
username/passwords.
Further make sure you specified a username and password. OS
Authentication is currently not supported by most of the
gateways of by generic connectivity.
CAUSE 4:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned
this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: errors.h (2005): ;
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does
not exist or access denied.[Microsoft][ODBC SQL Server Driver]
[TCP/IP Sockets]ConnectionOpen (Connect()).
(SQL State: 00000; SQL Code: 10061)
ORA-02063: preceding 2 lines from HSODBC
Resolution:
Make sure the foreign database is up and running on the configured
machine.
ORA-28528:
SQL> select * from DecimalType@hsodbc;
ERROR:
ORA-28528: Heterogeneous Services datatype
conversion error
Resolution:
The language of the foreign data store (remote database)
does not match with your Oracle database settings.
Starting with 9.2.0.l4 this error might occure for example '
if numeric values will be truncated.
Adapt in the Gateway/Generic Connectivity initialisation file
the parameter HS_LANGUAGE.
HS_LANGUAGE must be set to the LANGUAGE used in the FOREIGN
database.
as a play with 2 settings and check out which one works:
1. Try:
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P1
Do you still get the error? Yes, proceed with the second try:
2. Try:
HS_LANGUAGE=GERMAN_GERMANY.WE8ISO8859P1
(or to any other territory that uses a komma as decimal separator)
ORA-24274:
SQL> select * from all_catalog@<db_link>;
select * from all_catalog@<db_link>
ERROR at line 1:
ORA-28522: error initializing heterogeneous capabilities
ORA-28522: error initializing heterogeneous capabilities
ORA-28559: FDS_CLASS_NAME is <GTW>9.2.0.5.0_128, FDS_INST_NAME is <link>
ORA-02063: preceding 3 lines from %s
ORA-00604: error occurred at recursive SQL level 1
ORA-24274: no row exists in the HS$_BASE_CAPS table for these parameters
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_HS_UTL", line 431
ORA-06512: at "SYS.DBMS_HS_CHK", line 51
ORA-06512: at "SYS.DBMS_HS_UTL", line 48
ORA-06512: at "SYS.DBMS_HS", line 38
ORA-06512: at line 1
Resolution:
This special combination of errors might occure after applying
the Oracle database and gateway patchset 9.2.0.5 WITHOUT
running catpatch (=the upgrade script of the database).
=> Please run catpatch. If it ran successfully but connectivity
still fails you may run
cathnohs.sql and caths.sql to recreate the HS data
dictionary tables. BUT BE CAREFUL: Running CATHNOHS drops ALL
gateway/generic connectivity related database links!
Hope this helps,
Mark.

How to know Transparent gateway version

dear all,
Facts:
WIN 2008 AND MSSQL SERVER 2008
AIX 5.3 AND ORACLE 10.1
how i know the version of Oracle Transparent Gateway from :
- Oracle MS SQL Server 2008
- Oracle 10.1
how can i view that ???
thanks a lot !!!

Sorry, but it is not really clear what yo mean with:
how i know the version of Oracle Transparent Gateway from :
- Oracle MS SQL Server 2008
- Oracle 10.1
You can check the vesion of an installed gateway using Oracle Universal Installer which can list which products are installed or you can use opatch lsinventory -detail.
You can also check the listener - it contains PROGRAM=<executble> and now type the name of the executable on the command line. It will now report which gateway and which version you've installed.
If you're interested in which gateway can be used - then the only supported release is 11g which is certified with Oracle 10.1.0.5 + an additional gateway compatibility patch.

Copy Command in ABAP report

HI Gurus,
I have a ABAP report - basic list, with lot of batch data on it. based on the report they will copy the batch numbers and paste in standard transactions.
Users complaining to do a Ctrl + Y and then Ctrl + C then Ctrl + V to paste the batch numbers.
Is there anything we can do programatically using hot sopt on batch numbers so we get the selected BATCH and execute copy command programatically when they click on BATCH number on basic list.
All they need to do is Ctrl + V on standard transactions.
Is there anyway to achieve this?
Thanks Giri

Giri - you would probably get more results if you mark this as a question. That way you can assign po1nts to helpful answers.
In any event why don't you just do a CALL TRANSACTION when the user double clicks on a line?
Rob

How do I transfer a .psd file to illustrator that can then be placed in Muse as a .svg with transparent background?

I just wrote all this up in another thread. I did not realize at the time that the last post was in 2014, so I'm giving it a go here.
I am currently trying to create an .svg using Photoshop .psd file (with layers in tact). I'm new to these products so it may be obvious to others that the above intention was to eventually place the .svg in some sort of website creation software such as Muse. Which is precisely what I am attempting. However, I am getting a white background once I place or copy and paste into Muse. My starting .psd has a transparent background without any hidden layers causing this problem. To test this I placed the .psd file into Muse and it still has a transparent background. However when opening or placing this file into illustrator, it picks up a white background. If I do exactly as described above, I still get the same result. So far I have tried:
1) Simple copy and paste from Photoshop .svg to illustrator to Muse. Result - white background.
2) Placing the .psd in illustrator, then placing the .svg file in muse. Result - white background.
4) I have also tried the every combination of 1 and 2. - Result - white background.
3) I have now created a path in Photoshop from the text layer to yet again attempt the above methods. Result - white background.
I'm including an image of the object I am trying to place with transparent background, but I have both a flattened rasterized version, a version complete with layers and a third (.svg) with the corresponding objects. I am completely new to Illustrator as of today so any help would be greatly appreciated. Thanks.
Link to .psd file "Welcome text"

I was having some difficulties getting the correct dimensions of one of my objects, I eventually solved this problem without using svg. It was pretty simple when I stopped trying to over complicate things. I just linked the object to a near by object in photoshop, merged and placed it all as one. It looks great now. Thanks for your reply. You are correct, SVG was not the answer.

Copy command not working for Search Results

Hello,
We have a Search Form that triggers a TREX URL search. We also add a custom Layout Set on the search URL. (see URL below)
<b>URL Search:</b>
http:
<server name> &ConfigFileName=Navigation.xml&layoutSetMode=exclusive&ResourceListType=com.sapportals.wcm.SearchResultList&SearchType=ctrlpers&QueryString=*&rndLayoutSet=CustomLayoutSet&SelectedMatchesPerPage=15&SearchVisible=false
In the custom Layout Set, we've made our own UI command group to include the following commands: Search_from_here, details, copy, move etc
The problem is that whenever we click on the 'Copy' or 'Move' command of a resource, we get the following error message:
=====================================
Item not found
The item you are attempting to access is not available. Check that the name or link is correct. You might also check whether the associated repository is currently accessible.
======================================
The error message in the KM log files simply states "ERROR: RID not found".
Would anyone know how to fix this issue! I've tried many layout sets, but the copy command always gives me the same error message!
Any help or suggestions on this would be much appreciated...
Thanks,
Harman

Hi Harman,
yes, this is a known issue.
It's fixed with NW04 SPS 13.
Regards Matthias Röbig-Landau

Oracle 9i on LINUX Transparent Gateway for SQL Server

Does anybody know if there is a Transparent Gateway available for Oracle 9i on LINUX to connect to SQL Server? I have run the installer and cannot seem to find the install options for any Transparent Gateways. I am familiar with their location in the universal installer as I have installed the Oracle/SQL Server Transparent Gateway with Oracle in WinNT. Perhaps Transparent Gateways for Oracle/LINUX are not available?
Thanks in advance.

I have the same issue - we want to upgrade our 9.2 to 10g Linux, and need to maintain connectivity to some legacy sqlserver databases. I can't find any mention of tg4msql for linux. What gives? Anyone know the answer to this? thanks, michael

Copy Command in Pl/Sql block

Can I use Copy command in Pl/Sql.For example :-
Declare
cursor c1 is select table_name from all_tables
where owner = 'LSP' and rownum = 1;
v1 varchar2(2000);
Begin
for c2 in c1 loop
v1:='copy from lsp/lsp123479@dvlaq to scott/[email protected] create '|| c2.table_name ||' using select * from '||c2.table_name;
execute immediate v1;
end loop;
end;
Its not running properly giving an error as invalid Sql statement .
Is it bcoz Copy command cannot be used in a Pl/Sql Block.

Is there any other way to move the Table & data to another Data Base .Database link is the obvious one. And the SQL statement would look something like this (on the target database):
SQL> create table FOO nologging as select * from FOO@sourcedb;
However, the first question I always ask if why? What one may think is the solution to a problem is not always the best solution. So one need to identify the problem first, and then see what solutions there are and which one is the best fit.
Other options are replication (using materialised views for example), Data Pump (available with 10G) - even could be Data Guard, a standby database, or a Real Application Cluster... depending on just what the problem and actual requirements are.
Also important to note that SQL*Plus has its own set of commands. Do not confuse these commands (like EXEC, COPY, CONNECT, HOST etc) with the SQL and PL/SQL Languages. Not only are they executed by different software products, SQL*Plus commands are executed on the client and SQL (and PL/SQL) runs inside the Oracle database instance.

COPY command with Transparent Gateway

Similar Messages

Maybe you are looking for