Copy contents from Webdynpro Table to Clipboard

I have a requirement, wherein the contents from the table UI in Webdynpro, in an SRM system, have to be copied to a clipboard. The class CL_PERS_ADMIN->SET_DATA is the hint given for the same.
Not sure how it works or how to implement this!?!
Have gone through Web dynpro Selectoption: upload from clipboard and as per Harald's comment have also enabled 'Allow Programmatic clipboard access' in IE.
Please advice.
Edited by: Wincy J on Mar 23, 2011 9:30 AM

Hi Wincy,
Please check this...
copy data from table
Check this u understand
https://wiki.sdn.sap.com/wiki/display/WDABAP/General+Issues#GeneralIssues-1.190
Cheers,
Kris.
Edited by: kissnas on Mar 23, 2011 9:53 AM

Similar Messages

How do I copy content from an entire row into a different table?

How do I copy content from an entire row of one table into a different table? When I try to copy/paste the selected row into a row of the same size and configuration in another table in the same document, the cells change width, the formatting and border thicknesses change, and the text gets squeezed. When I was working with tables in Microsoft Word, there was no problem selecting text from a row in one table and placing it into a similar row and configuration in another table.

Hi Christopher Morgan
And welcome to apple discussions. With regard to your main question ....
Q: Can this be done?
A: It can but not easily (in that you may take a hit in quality). Apps like MpegStream Clip or DVDXDV may help:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.products.htm
It converts it back to a QT file for use with iDvd (or iMovie).
Hope this helps but if not just come on back.
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

How do i copy content from one hard rive to another through my macbook air? the copy and paste option doesn't work

It's because of the extension of the hard drive is a Windows extension ( most likely MSDOS or Ex-FAT), meaning you can only read but not write. If there are no important files (or you can copy the whole thing to your computer/mac) you can just reformat the hard drive and change the extension to NTFS (readable and writable on both windows and mac) or Mac OS Extended (readable and writable on Mac, readable on windows).
Go to DISK UTILITY
Choose the Hard Disk you intended
ERASE
You can choose either
(I personally prefer this one, you know just in case)

I need to copy data from a table in one database (db1) to another table in

Hi
I need to copy data from a table in one database (db1) to another table in another database (db2).
I am not sure if the table exists in db2,,,if it doesnot it needs to be created as well data also needs to be inserted...
How am I supposed to this using sql statements..?
I shall be happy if it is explained SQL also...
Thanking in advance

How many rows does the table contains? There are manyway you can achieve this.
1. export and import.
2. create a dblink between two databases and use create table as select, if structure doesnot exists in other database, if structure exists, use, insert into table select command.
example:
create a dblink in db2 database for db1 database.
create table table1 as select * from table1@db1 -- when there is no structure present
-- you need to add constraints manually, if any exists.
insert into table1 select * from table1@db1 -- when there is structure present.
If the table contains large volume of data, I would suggest you to use export and import.
Jaffar

How do I copy content from a 1st generation ATV back to my Mac?

I have a first generation ATV. Some time ago I synched from a MacBook a bunch of video onto the ATV hard drive. I subsequently deleted all the content from the MacBook. I now want to recover the content from the ATV hard drive back to the Mac. I am afraid that a simple sync between iTunes on the MacBook and the ATV will result in the MacBook deleting the content from the ATV, not in copying the content from the ATV back to the Mac. How can I safely recover the content from the ATV?

Right. Tiny confession. This is not actually my ATV. A friend is in this situation and I am trying to help, but having said that I'm pretty sure all the content is home movies, not purchased. I do have an app, Senuti, that will reverse copy content from an iPod or iPhone and it works great, but not on an ATV.

Urgently Need Code for Copy & Paste from Html Table in JSP to Excel file

I am creating a html table in JSP file .
I need code for 'Cut,Copy,Paste' functions ie. if someone wants to copy data from my table to excel file or from excel file to html table he shud be able to do that.
Can someone give me code for 'Cut,Copy and Paste' i.e. some javascript functions which can do cut, copy and paste which i can put in my jsp file
Thanks
Message was edited by:
javatechguru2007

package com.chinmayananda
public class Tetris{
// complete here
code]
public abstract class AbstractTetris {
public abstract void start();
public abstract void stop();
}nearly done

Regarding excel file download from webdynpro table element

Hi All,
 I want steps to do excel download from webdynpro table element.
Thanks in advance.
Regards,
Muneesh Gitta.

Hi Gitta,
There are 2 ways in doing it, one is using GUI DOWNLOAD FM or using class clwd_runtime_services.
DATA:
 node_node_alv TYPE REF TO if_wd_context_node,
 elem_node_alv TYPE REF TO if_wd_context_element,
 stru_node_alv TYPE wd_this->element_node_alv,
 itab_node_alv TYPE TABLE OF wd_this->element_node_alv..
navigate from <CONTEXT> to <NODE_ALV> via lead selection
@TODO handle not set lead selection
IF ( node_node_alv IS INITIAL ).
ENDIF.
get all declared attributes
node_node_alv->get_static_attributes_table(
 IMPORTING
 table = itab_node_alv ).
DATA:
 node_file_download TYPE REF TO if_wd_context_node,
 elem_file_download TYPE REF TO if_wd_context_element,
 stru_file_download TYPE wd_this->element_file_download ,
 item_fname LIKE stru_file_download-fname.
navigate from <CONTEXT> to <FILE_DOWNLOAD> via lead selection
node_file_download = wd_context->get_child_node( name = wd_this->wdctx_file_download ).
get element via lead selection
elem_file_download = node_file_download->get_element( ).
get single attribute
elem_file_download->get_attribute(
 EXPORTING
 name = `FNAME`
 IMPORTING
 value = item_fname ).
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = item_fname
 FILETYPE = 'ASC'
 TABLES
 data_tab = itab_node_alv.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
OR
check this blog for
Re: Export to Excel Sheet functionality

T code to Copy Data from one table to another table

Hi,
I want copy all data of one table to its copy table. Anyone knows transaction code to copy data from one table to another table.
Regards,
Jigar Thakkar.

Hi
Create a small program.
Extract data from T1 - database table and put it in one internal table - itab1.
loop the itab1 data .............
insert itab1 into tab2. (tab2 - second database table)
endloop.
try this....
hope it works....

How to copy data from transparent table to our own ceated z table?

How to copy data from transparent table to our own ceated z table?
Plz tell me different methods and which one is best?
Is get data from sflight into table z* is correct?

Hi Ajay,
let us consider you have to copy EKKO table to ZEKKO table
1. In ABAP program define internal table based on EKKO
 eg: i_ekko
2. Select the data from EKKO to i_ekko
 eg: select * from ekko into table i_ekko.
3. insert into Z-TABLE from the internal table
 eg: INSERT EKKO FROM TABLE I_EKKO.
 COMMIT WORK.
To insert in internal table you can use the following:
1. INSERT [wa INTO|INITIAL LINE INTO] itab [INDEX idx].
2. INSERT [wa INTO|INITIAL LINE INTO] TABLE itab.
3. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO itab2 [INDEX idx3].
4. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO TABLE itab2.
To inert in database table, use the following:
1. INSERT INTO <dbtabname> [CLIENT SPECIFIED] VALUES wa.
2. INSERT <dbtabname> [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT <dbtab> [CLIENT SPECIFIED]. oder
4. INSERT <dbtabname> [CLIENT SPECIFIED] ... .
Reward points.. if helpful.
Cheers !
Moqeeth.

Copy contents of one table to another

Hi,
Can anyone will give me the code copying the contents of one table to another...
Need an urgetn help..
Thanks

Thanks for everyones reply...
But here the problem
I to copy the content based on the length of the content
Eg:
If the content key code has 3 characteristics then where ever the last 2 characters are similar i need to copy the rrest content
EG:-
234
236
278
299
288
that means i need to take the last two characteristic and copy the rest data ...
another option
23411
23412
23413
23414
in this i need to check the last 4 characters and copy...
Can any one help..
Another important point is it need to copy in different fields ...
Eg: from where i am copying is FIELD A which has all the data and it need to copy in Field1,2,3,4,5,6,7,8
Thanks

Is there any way to copy content from my iPhone to a brand new Mac with a blank iTunes library?

Bit of background:
This time last week, I had a MacBook Air and a 6 year old desktop PC. Everything I had was on both of them, so they acted as each other's back up. This Sunday evening just gone, my PC finally died a traumatic death, and I can't even get it to boot from Safe Mode. Then on Monday while I was at work, my house was burgled, and my MacBook Air was stolen, amongst many other things. All I have now is my iPhone 4S which was with me at the time. All my music, photos, videos etc are on my iPhone, but I'm very aware that when I eventually get my replacement MacBook from our insurance company (I'm being realistic and accepting that I'll never see my stuff again), as soon as I plug my phone into a blank iTunes library, I'll lose everything that's on there. Obviously I can re-download everything I've purchased from iTunes, though it will take a VERY long time and I still won't have playlists etc, and I can probably either Dropbox or email what photos I have on there, but I have a lot of video clips from over the last few years that aren't on my camera roll - they're in the phone as proper videos, in the video player app, and I can't get Dropbox to view that location, or figure out how to email them. The videos are very important to me and I really don't want to lose them; so much so that I'm thinking of never syncing my iPhone ever again!
Basically, what I'm asking is, how can I copy everything from my iPhone into a blank iTunes library? Is it even possible?
ANY input whatsoever would be greatly appreciated - I really don't want to lose all my content over this, so please please please help if you can!
Thanks in advance

wjosten - thanks very much for the detailed instructions. I'll try this as soon as I get my replacement and it looks like you'll probably end up getting the green tick

Copying data from one table to another, but not duplicate

Good afternoon!
I am new to Oracle SQL, I have a difficulty.
I have a script that copies or add another table with data from another table.
If the table already has 01 "Registry 01" when you make a copy of the data in table 02, can not duplicate the "Registry 01" again.
As the table already exists since the beginning of the year before last and duplicate information, I can not apply the UNIQUE constraint because of the error. I have to make this change from now.
How to perform this validation so that no duplicate data?
DECLARE
w_cont NUMBER;
CURSOR c_simpro IS
SELECT sc.cd_simpro,
sc.ds_produto,
sp.qt_embalagem,
MAX(sp.dt_vigencia)
FROM simpro_cadastro sc,
simpro_preco sp
WHERE sc.cd_simpro = sp.cd_simpro
GROUP BY sc.cd_simpro,
sc.ds_produto,
sp.qt_embalagem;
BEGIN
FOR r_simpro IN c_simpro LOOP
w_cont := 0;
SELECT COUNT(1)
INTO w_cont
FROM pls_material pm
WHERE pm.cd_material_ops = r_simpro.cd_simpro;
IF w_cont = 0 THEN
INSERT INTO pls_material(nr_sequencia,
dt_atualizacao,
nm_usuario,
dt_atualizacao_nrec,
nm_usuario_nrec,
ie_tipo_despesa,
cd_estabelecimento,
nr_seq_estrut_mat,
cd_simpro,
ds_material,
ie_situacao,
ds_material_sem_acento,
dt_inclusao,
cd_material_ops_orig,
cd_unidade_medida,
cd_material_ops,
qt_conversao_simpro)
VALUES(pls_material_seq.nextval,
SYSDATE,
'ES-SIMPRO',
SYSDATE,
'ES-SIMPRO',
3,
1,
3,
r_simpro.cd_simpro,
r_simpro.ds_PRODUTO,
'A',
r_simpro.ds_PRODUTO,
SYSDATE,
r_simpro.cd_simpro,
'un',
TRIM(to_char(r_simpro.cd_simpro,'0000099999')),
r_simpro.qt_embalagem);
COMMIT;
END IF;
IF w_cont > 0 THEN
UPDATE pls_material p
SET p.qt_conversao_simpro = r_simpro.qt_embalagem,
p.dt_atualizacao = SYSDATE
WHERE p.cd_simpro = r_simpro.cd_simpro;
COMMIT;
END IF;
END LOOP;
END;
Edited by: 983464 on 22/01/2013 10:30

Hi,
in addition to what Marwin has already said, I suggest you to post CREATE TABLE and INSERT statements (as mentioned in the FAQ).
The error you are getting from MERGE command is because you need a way to uniquely identify within the table. So it's is important to know also if your table has a primary key/unique index so the keys could to be used in the MERGE command.
Additionally when you put some code or output please enclose it between two lines starting with {noformat}{noformat}
i.e.:
{noformat}{noformat}
SELECT ...
{noformat}{noformat}
Regards.
Al

How to copy file from one table to another table at another database

I need to transfer my tables from one workspace and schema to another workspace and schema. Basically I need to create again all the tables at this new schema. How could I transfer data from tha table at old schema to the table at new schema when this table has files stored in it? (data type is blob)
thank you so much,
Silver

Hello Silver,
Depending which database you're using (if it's available) I would recommend to use datapump.
Datapump allows you to copy an entire schema to another database, it's the "new" export/import you might now.
Regards,
Dimitri
http://dgielis.blogspot.com/
http://www.apex-evangelists.com/
http://www.apexblogs.info/
REWARDS: Please remember to mark helpful or correct posts on the forum

How to copy data from one table to another (in other database)

Hi. I would like to copy all rows from one table to another (and not use BC4J). Tables can be in various databases. I have already 2 connections and I am able to browse source table using
ResultSet rset = stmt.executeQuery("select ...");
But I would not like to create special insert statement for every row . There will be problems with date formats etc and it will be slow. Can I use retrieved ResultSet somehow ? Maybe with method insertRow, but how, if ResultSet is based on select statement and want to insert into target table? Please point me in the right direction. Thanks.

No tools please, it must be common solution. We suceeded in converting our BC4J aplication to PostgreSQL, the MSSQL will be next. So we want to write simple aplication, which could transfer data from our tables between these 3 servers.

Copy data from one Table to another Table

How can I copy data from one Oracle Table to another Oracle Table on a different server? Question 2: How can I clear all of the data in one Table with a single SQL script?
Thanks...

Question 1:
I assume you have the privileges. If you don't, ask the DBA to give them to you. Then
1. Login to database_source (It could be either the source or the target. Let's assume it's the source.)
2. Create a database link to database_target: CREATE DATABASE LINK link_to_database_target CONNECT TO myuserid IDENTIFIED BY mypassword USING 'database_target'; Note the single quotes.
3. Copy the table data: INSERT INTO targetowner.mytable@link_to_database_target SELECT * FROM sourceowner.mytable; COMMIT;
Question 2:
You have two options, but you may not have privileges for both.
Option 1:
DELETE FROM tableowner.tablename; COMMIT;
Advantage: Since this is a DML (Data Manipulation Language) statement, you have to commit the transaction. Also, the data will be gone but the table size is NOT changed, so it's ready for accepting replacement data. DML statements can simply be executed not only from SQL scripts, but from PL/SQL scripts as well.
Disadvantage: Slow, because all record deletion is logged, so you can recover from it by issuing a ROLLBACK; instead of the COMMIT; above. The table size is NOT changed, so if you are short of disk space or tablespace space, you have not resolved the issue.
Option 2:
TRUNCATE TABLE tableowner.tablename;
Advantage: Since this is a DDL (Data Definition Language) command, you do NOT have to commit the transaction. (DDL commands automatically commit both before and after their execution.) The table size will be changed back to the initial extent size which is the minimum size a table can have and can only be set when the table is created. If it needs to be changed, the table has to be dropped and recreated with a different initial extent size. The statement execution of this command is not logged, therefore it's much faster then the DELETE.
Disadvantage: No rollback. Being a DDL, this command cannot be executed straight from PL/SQL. If you need to issue this within PL/SQL, you will have to use dynamic SQL.

Copy contents from Webdynpro Table to Clipboard

Similar Messages

Maybe you are looking for