Copy control and program name for Sales Order to Delivery

Hi,
Please provide the copy control and program name to split a single delivery into multiple invoices depending on the sales order it belonged to and to split a single sales order into multiple deliveries depending on the shipping type.
Thanks in advance.

Hi there,
In VTFL, at item level, there is a field called "Data VBRK/VBRP". Routine 001 & 007 are for invoice split. Those may be relevant for your case.
In VOFM, select data transfer --> billing docs in the menu bar. It will give you the requirement numbers & their description.
Select the required routine num & click on Source text (note pad icon) on the above. It will give you the prog / include names.
For eg for 001 its FV60C001, for 007 its FV60C007.
Regards,
Sivanand

Similar Messages

Table name for sales order with Customer info

Hi Gurus,
Could you please provide me table name for sales order with customer no and customer name.
I have list of sales order number (more than 1000 no's ) i need to identify customer number and customer name (ship to party and sold to party information). I am running this report every week. so i plan to create sqvi for this report.
Thanks and regards,
B.Deethya.

Hello,
Access Tables VBAK & VBAP.
From the above tables you will get Solt to Party & Ship to Party Codes.
For Customer names you have to pass the Customer Codes to Table - KNA1
Hope this clarifies.
Thanks,
Jignesh Mehta

Fetch Vat and Octroi value for Sales Order Smartform .

Hi all ,
I am using a copy of /SMB40/SDORC_A smartform for sales order creation . I have to pass the vat and octroi of individual item as well as on the final total and then give the final bill amount . Can anyone please tell bewhich fields should i use and which areas do i need to do the changes in the smartform.

Hi Disha,
From the billing number VBRK-VBELN, pick the value of VBRK-KNUMV and pass this to KONV-KNUMV and display the value of KONV-KWERT against KSCHL
Regards..
Palaniayppan subbiah

Table Name for Sales Order Header Text.

Hi.
Whats the Table name for Sales Order Header Text???
Reg,
Amol

Hi Amol,
please Try to check the below link
http://scn.sap.com/thread/1361272
http://scn.sap.com/thread/416757
https://scn.sap.com/thread/1909247
https://scn.sap.com/thread/811915
Regards,
Gurunath

Whats the fieldname and table name for purchase order delivery date

hi all,
whats the fieldname and table name for purchase order delivery date
thanks and regrads

EKET-EINDT is the delivery date according to the schedule lines.
for example the line item has 100 qty.
it is sent in three schedules (40, 40, 20).
Then EKET will have 3 records for one PO Line item.
The final delievry data is the EKET-EINDT for the 3rd schedule line item.
Regards,
Ravi

Script and program name for MM:OUTWARD CHELLAN

Hi all ,
can any one give me the script name and program name for MM:OUTWARD CHELLAN.
Regards,
Arun.j

Hi
There are Std Scripts for PO,RFQ,CONTRACT, GRN , GI Note etc in MM
What is this Outward challan? what is its' equivalent SAP business document?
Check in The Tcode NACE for the relavent one, for the Output applications like MR,MD,EF,ME etc
Reward points for useful Answers
Regards
Anji

Standard smartform name and standard print program name for Sales Quotation

Hi,
I would like to know the standard smartform name and standard print program name which can be used for sales quotation through transaction VA23.
For eg: The standard output type for billing document (For T code VF03) is RD00 and it' smartform name is LB_BIL_INVOICE. It's print program name is RLB_INVOICE.
Similarly, I would like to know the standard smartform name and standard print program name for AN00 output type which is used for sales quotation. .
Regards,
Zahid

Hello
std driver prgram is /SMB40/RVADOR01
form entry is ENTRY
std smartforms is /SMB40/SDQUO_A an du can check this the in NACE tcode.
Output Type     AN00          Quotation
Application     V1            Sales
   Program                   /SMB40/RVADOR01
   Form Routine              ENTRY
   Form                      RVORDER01
   PDF/Smartform Form        /SMB40/SDQUO_A
Thank u,
santhosh

Table name for sales order history

hi guys,
               I want to know the name of table which contains sales order history.
regards
neelesh

Hi
Use this code it will get all the details
Sales Order Changed History Display
Sales Order Changed History Display
You can execute the report by :
1. Change Date
2. User Name
3. Sales Order Number
Submitted by : SAP Basis, ABAP Programming and Other IMG Stuff
               http://www.sap-img.com
REPORT ZSDCHANGE LINE-SIZE 132 NO STANDARD PAGE HEADING
                 LINE-COUNT 065(001)
                 MESSAGE-ID VR.
TABLES: DD04T,
        CDHDR,
        CDPOS,
        DD03L,
        DD41V,
        T685T,
        VBPA,
        TPART,
        KONVC,
        VBUK.
DATA: BEGIN OF ICDHDR OCCURS 50.
        INCLUDE STRUCTURE CDHDR.
DATA: END OF ICDHDR.
SELECT-OPTIONS: XUDATE FOR ICDHDR-UDATE,
                XNAME FOR ICDHDR-USERNAME,
                XVBELN FOR VBUK-VBELN.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
PARAMETERS: SUDATE RADIOBUTTON GROUP R1,
            SNAME RADIOBUTTON GROUP R1,
            SOBID RADIOBUTTON GROUP R1.
SELECTION-SCREEN END OF BLOCK BLK1.
DATA: WFLAG,
      WCHANGENR LIKE CDHDR-CHANGENR,
      WUDATE LIKE CDHDR-UDATE,
      WNAME LIKE CDHDR-USERNAME,
      WVBELN LIKE VBUK-VBELN,
      WDEC1 TYPE P DECIMALS 3,
      WDEC2 TYPE P DECIMALS 3,
      WDEC3 TYPE P DECIMALS 3,
      WDEC4 TYPE P DECIMALS 3.
DATA: UTEXT(16) VALUE 'has been changed',
      ITEXT(16) VALUE 'has been created',
      DTEXT(16) VALUE 'has been deleted'.
DATA: BEGIN OF ICDSHW OCCURS 50.
        INCLUDE STRUCTURE CDSHW.
DATA: END OF ICDSHW.
DATA: BEGIN OF ITAB OCCURS 10.
        INCLUDE STRUCTURE CDSHW.
DATA:   UDATE LIKE CDHDR-UDATE,
        USERNAME LIKE CDHDR-USERNAME,
        CHANGENR LIKE CDHDR-CHANGENR,
        VBELN(10),
        POSNR(6),
        ETENR(4),
        INDTEXT(200),
END OF ITAB.
SELECT * FROM VBUK WHERE VBELN IN XVBELN.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'VERKBELEG'.
CDHDR-OBJECTID   = VBUK-VBELN.
PERFORM READHEADER.
PERFORM READPOS.
LOOP AT ITAB.
    CASE ITAB-TABNAME.
      WHEN 'VBPA'.
        IF ITAB-FNAME = 'KUNNR' OR
           ITAB-FNAME = 'LIFNR' OR
           ITAB-FNAME = 'PARNR' OR
           ITAB-FNAME = 'PERNR' OR
           ITAB-FNAME IS INITIAL.
         MOVE ITAB-TABKEY TO VBPA.
         SELECT SINGLE * FROM TPART WHERE SPRAS = SY-LANGU
                                   AND   PARVW = VBPA-PARVW.
         IF SY-SUBRC = 0.
           REPLACE '&' WITH TPART-VTEXT INTO ITAB-INDTEXT.
         ENDIF.
       ENDIF.
     WHEN 'VBAP'.
       IF ITAB-FNAME IS INITIAL.
         REPLACE '&' WITH 'Item' INTO ITAB-INDTEXT.
       ENDIF.
     WHEN 'KONVC'.
       MOVE ITAB-TABKEY TO KONVC.
       SELECT SINGLE * FROM T685T WHERE SPRAS = SY-LANGU
                                 AND   KVEWE = 'A'
                                 AND   KAPPL = 'V'
                                 AND   KSCHL = KONVC-KSCHL.
       IF SY-SUBRC = 0.
         REPLACE '&' WITH T685T-VTEXT INTO ITAB-INDTEXT.
       ENDIF.
     ENDCASE.
     IF ITAB-INDTEXT(1) EQ '&'.
       REPLACE '&' WITH ITAB-FTEXT(40) INTO ITAB-INDTEXT.
     ENDIF.
     IF ITAB-CHNGIND = 'I'.
       REPLACE '%' WITH ITEXT INTO ITAB-INDTEXT.
     ELSEIF ITAB-CHNGIND = 'U'.
       REPLACE '%' WITH UTEXT INTO ITAB-INDTEXT.
     ELSE.
       REPLACE '%' WITH DTEXT INTO ITAB-INDTEXT.
     ENDIF.
     CONDENSE ITAB-INDTEXT.
     MODIFY ITAB.
   ENDLOOP.
ENDSELECT.
IF SUDATE = 'X'.
SORT ITAB BY UDATE VBELN POSNR ETENR.
ELSEIF SOBID = 'X'.
SORT ITAB BY VBELN POSNR ETENR UDATE.
ELSE.
SORT ITAB BY USERNAME VBELN POSNR ETENR UDATE.
ENDIF.
LOOP AT ITAB.
CLEAR WFLAG.
IF SUDATE = 'X'.
    IF WUDATE NE ITAB-UDATE.
      SKIP.
      WRITE:/001 ITAB-UDATE,
             023 ITAB-USERNAME,
             037(10) ITAB-VBELN.
      WFLAG = 'X'.
      WUDATE = ITAB-UDATE.
      WCHANGENR = ITAB-CHANGENR.
    ENDIF.
ELSEIF SOBID NE 'X'.
    IF WVBELN NE ITAB-VBELN.
      SKIP.
      WRITE:/001 ITAB-VBELN.
      WVBELN = ITAB-VBELN.
    ENDIF.
ELSE.
    IF WNAME NE ITAB-USERNAME.
      SKIP.
      WRITE:/001 ITAB-USERNAME.
      WNAME = ITAB-USERNAME.
    ENDIF.
ENDIF.
IF WCHANGENR NE ITAB-CHANGENR.
    WRITE:/023 ITAB-USERNAME,
           037(10) ITAB-VBELN.
       WFLAG = 'X'.
       WCHANGENR = ITAB-CHANGENR.
    ENDIF.
    IF WFLAG = 'X'.
      WRITE: 013 ITAB-CHNGIND,
             049 ITAB-POSNR,
             057 ITAB-ETENR,
             065 ITAB-INDTEXT(60).
    ELSE.
      WRITE: /013 ITAB-CHNGIND,
              049 ITAB-POSNR,
              057 ITAB-ETENR,
              065 ITAB-INDTEXT(60).
    ENDIF.
WRITE:/065 ITAB-F_OLD.
WRITE:/065 ITAB-F_NEW.
ENDLOOP.
FORM READHEADER.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
       EXPORTING
            DATE_OF_CHANGE    = CDHDR-UDATE
            OBJECTCLASS       = CDHDR-OBJECTCLAS
            OBJECTID          = CDHDR-OBJECTID
            TIME_OF_CHANGE    = CDHDR-UTIME
            USERNAME          = CDHDR-USERNAME
       TABLES
            I_CDHDR           = ICDHDR
       EXCEPTIONS
            NO_POSITION_FOUND = 1
            OTHERS            = 2.
CASE SY-SUBRC.
    WHEN '0000'.
    WHEN '0001'.
      MESSAGE S311.
      LEAVE.
    WHEN '0002'.
      MESSAGE S311.
      LEAVE.
ENDCASE.
ENDFORM.
FORM READPOS.
LOOP AT ICDHDR.
    CHECK ICDHDR-UDATE
                        IN XUDATE.
    CHECK ICDHDR-USERNAME
                          IN XNAME.
    CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
         EXPORTING
              CHANGENUMBER      = ICDHDR-CHANGENR
              TABLEKEY          = CDPOS-TABKEY
              TABLENAME         = CDPOS-TABNAME
         IMPORTING
              HEADER            = CDHDR
         TABLES
              EDITPOS           = ICDSHW
         EXCEPTIONS
              NO_POSITION_FOUND = 1
              OTHERS            = 2.
    CASE SY-SUBRC.
      WHEN '0000'.
        LOOP AT ICDSHW.
          CHECK ICDSHW-CHNGIND NE 'E'.
          CLEAR ITAB.
          MOVE-CORRESPONDING ICDHDR TO ITAB.
          MOVE-CORRESPONDING ICDSHW TO ITAB.
          CASE ITAB-TABNAME.
            WHEN 'KONVC'.
              MOVE ICDHDR-OBJECTID TO ITAB-VBELN.
              MOVE ICDSHW-TABKEY(6) TO ITAB-POSNR.
            WHEN OTHERS.
              MOVE ICDSHW-TABKEY+3(10) TO ITAB-VBELN.
              MOVE ICDSHW-TABKEY+13(6) TO ITAB-POSNR.
              MOVE ICDSHW-TABKEY+19(4) TO ITAB-ETENR.
          ENDCASE.
          MOVE '& %' TO ITAB-INDTEXT.
          APPEND ITAB.
          CLEAR ITAB.
        ENDLOOP.
      WHEN OTHERS.
        MESSAGE S311.
        LEAVE.
    ENDCASE.
ENDLOOP.
ENDFORM.
TOP-OF-PAGE.
WRITE:/ SY-DATUM,SY-UZEIT,
       50 'SALES ORDER CHANGE HISTORY',
      120 'Page', SY-PAGNO.
WRITE: / SY-REPID,
         60 'SALES ORDERS STATISTICS'.
SKIP.
ULINE.
IF SUDATE = 'X'.
WRITE:/001 'Change Date',
         013 'Time',
         023 'User Name',
         037 'Sale Order',
         049 'Line',
         057 'Sch No',
         065 'Changes'.
ELSEIF SOBID = 'X'.
WRITE:/001 'Sale Order',
         013 'Line',
         021 'Sch No',
         029 'Change Date',
         041 'Time',
         051 'User Name',
         065 'Comment'.
ELSE.
WRITE:/001 'User Name',
         015 'Time',
         025 'Change Date',
         037 'Sale Order',
         049 'Line',
         057 'Sch No',
         065 'Changes'.
ENDIF.
ULINE.
*--- End of Program
Regards
Shiva

Copy 0CO_OM_WBS_5 to get variances for Sale Order / Item

Hi ,
I copied the existing 0CO_OM_WBS_5 extractor and modified it with a logic to bring the Result Analysis numbers for Sales Orders. But when trying to create a normal generic datasource with the FM it is not allowing and giving me an error "E_T_DATA is not present in the the Function Module " The same is not available in standard datasource FM as well for 0CO_OM_WBS_5 .Do we need to maintain any table for mapping the datasource with FM and Extract Structure specific to the CO-OM Extractors.
Help will be greatly appreciated.
Regards,
VSK

Thanks.

Detecting change on header and item texts for sales order in user exit

Hi,
In the user exit of VA02, I need to identify/detect if header or item texts for sales order is changed or not.
Please advise on this.
Regards,
Shreyas

Normally system stores the old values in XTables and new values in YTables. Check if you have access to these in your user exit. If you give the user exit name, someone will be able to guide you.
hith
Sunil Achyut

Create and Change functionality for Sales order

Hii All,
            Can any one please suggest me any Standard program or BAPI or IDOC for Sales order, it should cover create as well as change fuctionality of Sales order.
this is very urgent to me.
Suitable Answer will be Rewarded.
Thankyou,
Shobha.

For change you can use:
BAPI_SALESORDER_CHANGE         Sales order: Change Sales Order
For create you have the following choices:
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESDOCU_CREATEFROMDATA with business object 'BUS2032'
The difference between the create ones is the functionality you get e.g. create_from_data2 is the 'most powerful' but you also have to provide the most data. It just depends on what you want it to do.
In terms of IDOCS:
message type:
SALESORDER_CREATEFROMDAT201 or
SALESORDER_CREATEFROMDAT202 or
ORDERS05
Hope that helps,
Michael
Here is an example we use, you might want to populate additional fields or leave fields out in case you want different data to be transferred to the IDOC - however some fields are mandatory.
create the order header structure
ls_header-doc_type   = ls_screen-order_type.
ls_header-sales_org = gc_vkorg_aa01.
ls_header-distr_chan = gc_distr_aa.
ls_header-division   = gc_divis_aa.
ls_header-purch_no   = ls_screen-po_num.
ls_header-po_method = ls_screen-po_source.
ls_header-ship_cond = ls_screen-ship_cond.
create partner input table (sold to)
ls_partner-partn_role = gc_role_sold.
ls_partner-partn_numb = ls_screen-sold_to.
APPEND ls_partner TO lt_partner.
create partner input table (ship to)
ls_partner-partn_role = gc_role_ship.
ls_partner-partn_numb = ls_screen-ship_to.
APPEND ls_partner TO lt_partner.
items are added by looping at a table
    ls_item-material = <fs_upload>-matnr.
    ls_item-req_qty = <fs_upload>-quantity.
process the quantity, it needs to be three decimals, because it
will be moved into a string in the BAPI and divided by 1000 before
it is moved back into a number field (1.500 => 001500 => 1.5)
    ls_item-req_qty = ls_item-req_qty * 1000.
truncate remaining decimal places if exist (1.2525 => 1252.5 => 1252 => 1.252)
    ls_item-req_qty = trunc( ls_item-req_qty ).
    price is taken from the file
      ls_item-cond_type = gc_cond_so_upld_price.
      ls_item-cond_val1 = <fs_upload>-price.
    condition one (price) is multiplied by 10 in the BAPI
      ls_item-cond_val1 = ls_item-cond_val1 / 10.
    no discount
      ls_item-cd_type2   = gc_cond_so_upld_disc.
      ls_item-cd_value2 = 0.
    ls_item-item_categ = ls_screen-item_cat.
      APPEND ls_item TO lt_item.
then BAPI is called
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
    EXPORTING
      order_header_in           = ls_header
      business_object           = gc_bus_obj
    IMPORTING
      SALESDOCUMENT             = lv_vbeln
      RETURN                    = ls_return
    tables
      order_items_in            = lt_item
      order_partners            = lt_partner.
IF ls_return-type NE gc_msgty_error AND
     ls_return-type NE gc_msgty_abend.
No errors where found
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
There was an error or abend
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ENDIF.

Finding batch job name for sales order change (billing block)

hi,
there is a tab known as billing block in the sales order.
now a batch job ran which removed this billing block and released the sales order for delivery and PGI activities.
we have the information regarding the date and time on which this batch job ran but the job name is unknown.
also we tried in SM37 which gives no details.
we have information regarding the user name of the batch job but name is unknown.
help us in finding the batch job name with the above mentioned available data.
it is a very high priority.
thanks in advance
Rahman

Hi ,
in SM37-->
     a)Set the Job start condition ( dates ) --You have information --YOu can keep them blank if you don't have the information. But it will fetch all the batch jobs of the user.
     b) user Name -You have information
     c_ use '*' in place of Job name
Then this will fetch you the Batch Job name . Then Check step --> you can find the program name.
You can check the Log for job details like when started and when completed.
Regards,
Lanka

Header and Item Texts for Sales Order

Hi,
Can any one help me on Header Text and Item Text...........
<b>STXH & STXL</b>
TDOBJECT :__________
TDID:_____________
TDNAME :_______________
Regards,
Raghunath.S

Hi
Double click on the related text
it will open Text editor
from Menu GOTO-> header
for SO HEADER Texts
then you see the 4 paramters like OBJECT (VBBK),ID,OBJECTNAME (sales Order No) and LANG
FOR SO ITEM texts
OBJECT (VBBP table), ID, OBJECTNAME(SO no plus ITEM No) and LANG
You have to pass these 4 parameters to READ_TEXT fun module to fetch the corresponding texts
see the doc on READ_TEXT
READ_TEXT
READ_TEXT provides a text for the application program in the specified work areas.
The function module reads the desired text from the text file, the text memory, or the archive. You must fully specify the text using OBJECT, NAME, ID, and LANGUAGE. An internal work area can hold only one text; therefore, generic specifications are not allowed with these options.
After successful reading, the system places header information and text lines into the work areas specified with HEADER and LINES.
If a reference text is used, SAPscript automatically processes the reference chain and provides the text lines found in the text at the end of the chain. If an error occurs, the system leaves the function module and triggers the exception REFERENCE_CHECK.
Function call:
CALL FUNCTION 'READ_TEXT'
EXPORTING CLIENT = SY-MANDT
OBJECT = ?...
NAME = ?...
ID = ?...
LANGUAGE = ?...
ARCHIVE_HANDLE = 0
IMPORTING HEADER =
TABLES LINES = ?...
EXCEPTIONS ID =
LANGUAGE =
NAME =
NOT_FOUND =
OBJECT =
REFERENCE_CHECK =
WRONG_ACCESS_TO_ARCHIVE =
Export parameters:
CLIENT
Specify the client under which the text is stored. If you omit this parameter, the system uses the current client as default.
Reference field: SY-MANDT
Default value: SY-MANDT
OBJECT
Enter the name of the text object to which the text is allocated. Table TTXOB contains the valid objects.
Reference field: THEAD-TDOBJECT
NAME
Enter the name of the text module. The name may be up to 70 characters long. Its internal structure depends on the text object used.
Reference field: THEAD-TDNAME
ID
Enter the text ID of the text module. Table TTXID contains the valid text IDs, depending on the text object.
Reference field: THEAD-TDID
LANGUAGE
Enter the language key of the text module. The system accepts only languages that are defined in table T002.
Reference field: THEAD-TDSPRAS
ARCHIVE_HANDLE
If you want to read the text from the archive, you must enter a handle here. The system uses it to access the archive. You can create the handle using the function module ACHIVE_OPEN_FOR_READ.
The value '0' indicates that you do not want to read the text from the archive.
Reference field: SY-TABIX
Default value: 0
Import parameters:
HEADER
If the system finds the desired text, it returns the text header in this parameter.
Structure: THEAD
Table parameters:
LINES
The table contains all text lines that belong to the text read.
Structure: TLINE
Exceptions:
ID
The text ID specified in the parameter ID does not exist in table TTXID. It must be defined there together with the object of the text module.
LANGUAGE
The parameter LANGUAGE contains a language key that does not exist in table T002.
NAME
The parameter NAME contains the name of a text module that does not correspond to the SAPscript conventions.
Possible errors:
The field contains only blanks.
The field contains the invalid characters * or ,.
OBJECT
The parameter OBJECT contains the name of a text object that does not exist in table TTXOB.
NOT_FOUND
The system did not find the specified text module.
REFERENCE_CHECK
The text module to be read has no text lines of its own but refers to the lines of another text module. This reference chain can include several levels. For the current text, the chain is interrupted, that is, one of the text modules referred to in the chain no longer exists.
WRONG_ACCESS_ TO_ARCHIVE
The exception WRONG_ACCESS_TO_ARCHIVE is triggered if an archive is accessed using an incorrect or non-existing archive handle or an incorrect mode (that is, read if the archive is open for writing or vice versa).
<b>Reward points for useful Answers</b>
Regards
Anji

Question on Search Help and Authorization Check for Sales Order Type

Question 1:
When I go to VA01 and click the search help, it shows only order type that are not blocked.
However, when I have sales order type in select-options of a Z program,
S_AUART FOR VBAK-AUART
I click on the search help, it gives all the sales order types. How can I have a list with unblocked sales order type only?
Question 2:
I want to check whether a use can extract data from a sales order type (e.g. OR and RE)that he/she authorized to use.
I have include the following in my program:
AUTHORITY-CHECK OBJECT 'AUART'
ID 'AUART' FIELD 'OR'.
It always returns SY-SUBRC = 12.
But order type 'OR' is granted to the user (he/she can create order with type OR in VA01)
Please kindly give me some ideas, thanks.

hi,
ad1
use following code:
AT SELECTION-SCREEN ON VALUE-REQUEST FOR auart.
PERFORM auartGet.
FORM auartGet.
    CALL FUNCTION 'RV_HELP'
         EXPORTING
              KEY            = VKORG
              KEY2           = VTWEG
              KEY3           = SPART
              KEY4           = '0'
              NUMBER         = '008'
              FIELD_IN       = AUART
         IMPORTING
              FIELD          = AUART.
ENDFORM.
ad2.
example:
   AUTHORITY-CHECK OBJECT 'V_VBAK_AAT'
         ID 'AUART' FIELD 'OR'
         ID 'ACTVT' FIELD '01'. "01-create order, 02-change, 03 display
check sy-subrc eq 0.
regards,darek

Copied layout is not working for Sales order item assinment block

Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
Venkky

Hi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky

Copy control and program name for Sales Order to Delivery

Similar Messages

Maybe you are looking for