Corrupt File (Error 4) Please Please help!!

Hi All
My mac crashed (for the first ever time!) when my portfolio must have been on in the background and all of a sudden it's saying the file is damaged! i've tried the different ways of opening/loading/moving/using a different machine but still no luck!
Is there any way you guys could help me, i can't afford to buy the quark/id2q converter so any help would be extremely appreciated! (i reaally need this asap!)
The file is about 140mb, what kind of support/advice do you guys offer?
Thanks so much, any help is appreciated
Chris

It's a violation of the license agreement for anyone to repair the file for you, it it's possible, but for less than the cost of buying two plugins and a Quark license if you don't already have one (you need both Quark and ID and the plugins for both to attempt a recovery), Markzware will atempt to recover the file for you. I believe the fee is about $200 and there is no charge unless they succeed. Fix Your Bad InDesign Files!

Similar Messages

  • Corrupt file!! please help!!

    hey ya'll
    i'm trying to open an FCP project that i've been editing previously. when i try to open it, a message appears saying "reading project 15%". it just stays like this without fully opening. every other project file on my drive will open accept this one. any help is greatly appreciated.

    i have tried that, unfortunately they autosave files have been deleted.

  • Corrupt file error while writting a file in compress mode

    Hello,
    I have a scenario where i am writting data in a file in appending mode with filter 'compress' addition using open dataset, on Al11 for the first set of records it works fine but if this file is accessed again for writting data in next select statement ( its between select endselect),the file is getting corrupted, if i try to open this file corrupt file error come. can someone help.
    Thanks and Regards,
    Gunjan

    Hi Gunjan,
    Unfortunately, you can't do in that way. The behaviour of that OPEN and FILTER 'compress' clause is to create a compacted file, to be read later, but it can be appended... all your writes go to a pipe and when you close the file this is sent to 'compress' program or other filter and than a compacted file is created.
    You can't go back and start inserting again after close it.
    Follow documentation:
    http://help.sap.com/abapdocu_70/en/ABAPOPEN_DATASET_OS_ADDITION.htm
    The addition FILTER must not be used together with the addition AT POSITION or for the access type FOR UPDATE.
    Regards, Fernando Da Ró

  • Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error."  Please help.

    Photoshop Elements 8.  "Could not use Clone Stamp Tool because of a program error."  Please help.

    Try this:
    Open your picture file
    Access the clone stamp tool
    Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
    TIPS:
    It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
    Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
    Let us know  how you make out with the error message now.

  • Can't install Adobe Flash player ERROR. Please help

    I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
    Please help me I am really happy if someone here can help me.

    Hello,
    The log file indicates there are permissions issues on a couple of files and they are not being removed.  This is preventing the installation of the new version.  Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller.  Please only run the uninstaller and do not attempt to re-install at this time.
    Thank you.
    Maria

  • Export error. Please help

    Hi ALL,
    When i try to export the database i am getting the following error. Please help
    C:\>exp cas/compass@prd_test file='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.dmp' log='I:\Prd_dumb222_refresh\backup_before_refresh\exp_cas_backupbeforefresh_020310.log'
    Export: Release 10.2.0.1.0 - Production on Wed Feb 3 06:04:25 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    EXP-00056: ORACLE error 6550 encountered
    ORA-06550: line 1, column 41:
    PLS-00302: component 'SET_NO_OUTLINES' must be declared
    ORA-06550: line 1, column 15:
    PL/SQL: Statement ignored
    EXP-00000: Export terminated unsuccessfully
    The version of the db and export utility is same as u see from below.
    C:\>sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.1.0 - Production on Wed Feb 3 06:06:35 2010
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    SQL>
    Regards
    Arun Kumar

    One of the most common causes of these errors is that you are using a higher version of the export utility compared to your RDBMS version. For instance, you might be using the Oracle 10.2.0 exp utility against an Oracle 9.2.0 database. Use the 9.2.0 exp utility instead. Metalink Note 132904.1 discusses the compatibility matrix between exp and database versions.

  • Error messages please help !!!!

    Hi.
    It is driving me mad. It is not possible neither to install  NW_JAVA_700SP14_SR3 nor
    NW_JAVA_700SP09. Always the same error ?
    Please help what is wrong, I get these error messages:
    ERROR 2008-07-11 13:53:02.750
    CJS-30051  Cannot insert a key value pair in the secure store files. SOLUTION: See output of log file SecureStoreInsert.log: SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
    ERROR 2008-07-11 13:53:02.796
    FCO-00011  The step insertAdminDataInSecStore with step key |NW_Workplace|ind|ind|ind|ind|0|0|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Configure_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR .

    ever been faced with the same problem ?
    Why deleting ? It that only one way to fix this problem ?
    What are the others doing in such cases. Or am I the only one person
    where has this special problem on the world. Becides I dont believe
    in solving the problem through removing mentioned directory and
    reinstalling. Nevertheless I will try it. I let you know about the result.
    bye
    sas

  • HT201210 I have tried to update my iPhone 4 many times (from iOS 5.1 to latest version), but everytime it fails and says that it cannot be updated. unknown error (3194). please help.

    I have tried to update my iPhone 4 many times (from iOS 5.1 to latest version), but everytime it fails and says that it cannot be updated. unknown error (3194). please help.
    <E-mail Edited by Host>

    You might try reading the entire help document you linked from:
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • TS3212 I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

    I continue to try to install iTunes; when I attempt to open the newly installed iTunes, I receive errors that it was not correctly installed. I have followed the direction on this website, but I face the same error. Please help.

    latest message indicates I need Apple Application Update
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • My ADE is having an activation server error. Please help.

    My ADE is having an activation server error. Please help.

    If due to some reason, you are unable to deauthorize ADE, follow the below steps:
    Note: Try these steps only if you remember the password so that you can authorize ADE again
    1.Go-> Go to folder.
    Go to folder dialog will appear.
    2. Type   ~/Library/Application Support/Adobe/Digital Editions
    drag the activation.dat file to the trash.
    ADE will be deauthorized now.
    Now Authorize ADE again.

  • How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud.  I am sure I chose poorly at the 'keep file' window.  Please help. My Brain hurts- 18   movies need to go-.

    How do I delete movies from iTunes library? I have moved them to the iCloud and now only seem to have the option to hide the icon in iCloud.  I am sure I chose poorly at the 'keep file' window.  Please help. My Brain hurts… 18 plus movies need to go….  Thank you.

    Instead of removing the music from the cloud or the iTunes library why not shuffle your music using a Smart Playlist which excludes the holiday music, or tracks that are not checked. For example, use this very simple Smart Playlist:

  • It says "error 7, windows error 127" Please help

    It says "error 7, windows error 127" Please help

    I tried that, got this error:
    An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
    Please help!

  • After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

    Have you tried to reboot your phone(hold home and lock button simutainiously)?

  • Error 1001 - please Help!

     I am going crazy!  the software update keeps on displaying the error code 1001.
    I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
    please help!

     I am going crazy!  the software update keeps on displaying the error code 1001.
    I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
    please help!

  • My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

    It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

    Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

Maybe you are looking for

  • In NWDS add web service server from ECC 6.0 through WSIL

    Hello, I'm trying to list the web services present on the ECC 6.0 SAP through the Web Service Navigator in NWDS. We add the address: http://abapserver:1080/sap/bc/srt/wsil I get an error from NWDS: Error connecting to server '...' (http://abapserver:

  • How to identify various objects used in code

    Hi All, Can anyone tell me how can I list down various objects used in a program. For example in a report program if I am calling a function module, calling an include program, implementing a class and so on. Now I want to list down the objects used

  • How to create Characteristic group in CO-PA for assessment purpose

    Hi, Can anybody guide me as how to create Characteristic group in CO-PA for assessment of cost center balance to CO-PA? Thanks, Bijay

  • VL10H - option Created By

    Hi, We want to use the Option 'Partners' tab as Created by to display the list of POs and sales orders by the person who created them, using the ID of that person in this field for partner function $1. It doesn't seem to work though...first I got err

  • Why does mail suddenly import thousands of messages again?

    Once every few months Mail under 10.6.8 re-imports 2700 or so emails and takes half an hour, but when finished it has not added anything I see in the mail list. Specifically there are no "new" email messages.  This has been going on for years. 2010 M