Corrupted catalog

The last few times I've down loaded photos directly from my camera to LR I got a notice that said my catalog had been corrupted. I had backup catalog files but using these meant that all photo modifications and folders i had were lost and i had to do this work again to where I was. I found out that I could import my photos indirectly through I Photo without getting a corrupt file notice. My questions: Is this normal? Could there be something wrong with the photo disks I'm using that have been suitable for direct imports to LR. I'm concerned and confused. Any thoughts? Bill

From your description, it's your catalog that's corrupt, not your imported images. Do you back up the catalog periodically? The lightroom backup process does an optional integrity check of your catalog.
To tell LR to do a backup, go to Edit/Catalog Settings.../General and choose something other than "Never" from the Backup dropdown. Then restart LightRoom and choose the option to "Test integrity of this catalog" from the dialog box.
If the catalog is corrupt, you'll need to revert to a backup version, if you have one.
Hal

Similar Messages

LR2 Experienced System Crash & Corrupted Catalog - Need Help!!!

We are using: Mac OS X Version 10.5.8
Background on Lightroom Use:
The size of the catalog in question is 296 MB.
Pictures on an 8GB smart card were being uploaded into lightroom and simultaneously moved into a folder on an external hard drive at the time of the crash. (During this download, the imac screen gave us a very scary...."Death Veil" that started at the top and slowly covered in a downward motion the entire screen, freezing up the computer completely.)
The error message said we needed to restart the computer using the restart option or shut the computer down using the on/off switch.
Since the computer was "frozen" we were unable to access the restart option so we hit the off switch, holding it down until the imac shut itself down.
After waiting for approximately a minute, we restarted the imac.
The imac started as it usually does, however, when we opened Lightroom2, the following message appeared:
After Selecting the "Repair Catalog" Option the following message appeared:
Other catalogs are operating properly in LIghtroom.
We have no available backup and are looking for someone who can assist with
perhaps fixing the corrupted catalog. (Literally, thousands of hours)
Mahalo Nui Lo

If you ever ran "Save" on a lot of images, you'll have all your edits and metadata for those images, and if you ran save recently on the whole catalog of images, you'll be pretty well off. In such a case, I'd start a brand new catalog, and Import in place all the images.
However, assuming the worst, that the above avenue won't yield much, one particular Adobe employee, Dan Tull, is a whiz at repairing catalogs, and you may get it done by sending the catalog to him. From a post long ago: Dan Tull can be contacted at dtull-at-adobe.com .. .. note that @ has been substitued with -at- in above email address .. I haven't seen Dan in this forum for a while, so it's not a for sure thing.
With best wishes,

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maveric

Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maverick

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

Temporarily unable to repair corrupt catalog

i'm running the current version of lightroom. it is giving me a dialog box that says:
temporarily unable to repair corrupt catalog
lightroom encountered problems reading or writing from disk when attempting to repair catalog
the operation may succeed in future attemps
if you wish to try again, please first check available disk space and close all other applications
each time i try, the same dialog box appears.
the corrupt catalog is located on a 1tb drive, 554gb used / 357gb free
what can i do to fix this?

I presume you don't have a recent-enough catalog backup (?)
I bet you won't let that happen again..
Anyway, depending on what's wrong with the catalog, you may be able to recover develop settings (only) via a plugin called WreckHover (free, by me).
In addition to catalog, settings may be stored in:
* xmp if you've saved metadata (if not, I bet you won't let that happen again either) - recovered when importing new photos, or reading metadata (Library menu) of already-imported photos.
* exported versions (if exported with all metadata) - you can recover settings from those via the same plugin: WreckHover.
Note: you'll need to restore a backup catalog first, or start a new one if no backups (really?).
Good luck,
Rob

Possibly Corrupt Catalog .Dat Files - A Serious Problem?

This question continues from http://forums.adobe.com/thread/804620?tstart=-1.
The three .dat files (backupCt.dat, collstatus.dat and tagstatus.dat) in one of our Adobe\Catalog Folders subfolders ("Paintings") may be corrupted. Whereas these files appear to be rewritten routinely, along with the thumb.5.cache file, each time Adobe Photoshop Elements is opened to one or another of our catalogs, the three files have not been rewritten for the Paintings catalog since 3/9/11, although that catalog has been opened almost every day. This situation came to my attention because the three files showed up in error messages in the Second Copy backup program I run every night, saying that the three files could not be copied because access is denied. In my previous post (referenced above), MichelBParis suggested that I could delete those files safely and that they would be rewritten when the catalog was next opened. However, I can't delete the files, rename them, or move them elsewhere because of the access denied status (I get an error message asking me to be sure that the disk is not full or write protected [which it is not] and that the files are not currently in use [which they are not, at least as far as I can tell -- Adobe Photoshop Elements has been closed when I have attempted all procedures, and I don't see any other applications or processes running, as per Task Manager, that I can immediately identify as belonging to Adobe). I have thought about restarting the computer in Safe Mode to see if I can delete the files then. However, I am a bit nervous about trying this, as the Paintings catalog in question is huge and of enormous importance to my wife -- I don't want to do something that might inadvertently make it impossible to access or use that catalog (as happened to us once before when we were using Adobe Photoshop Album Starter Edition 3.2, and the catalog became corrupted).
My questions:
(1) Does anyone know what these three .dat files actually do? I've not so far been able to find this information via Google.
(2) If these files remain in their present state (access denied and non-rewritten), do we run the risk of ending up with a serious problem down the road and loss of our ability to access the catalog (or some other loss of functionality)?
(3) Would it be safe for me in fact to delete these three files if I can find a way to do so (e.g., in Safe Mode)?
(4) If it would, indeed, be safe for me to delete the files, and if that would seem to be a next step to try, are there any suggestions for how I could go about doing so?
(5) Any other suggestions about how I can get the Paintings catalog back in proper shape?
Thanks for any help anyone can provide!

Most likely the files are not corrupt if your basis is that the backup program cannot open the files. However, I would be concerned about the security settings in the files if multiple users need to access the same catalog. This might be why you aren't seeing any changes to the time/date because one of the user doesn't have rights to modify the file.
Please tell me what OS you are running and what version of PsE?
For PsE 9 (and I think 8), you can modify the media-analysis options from the Organizer...
Menu 'Edit->Preferences->Media-Analysis'
Uncheck either checkbox as shown in the red circles
After hitting 'OK', exit the organzier and reboot.
See if you can access the .Dat files.
Instead of copying the catalog, I would just create a new empty catalog. This can be done as follows...
Menu 'File->Catalog...'
Make sure you note where the current catalog is located before you continue. The name of the current catalog is found in the box at the bottom of the dialog with [Current] added to the end of the name. Now...
Click on 'New...'
Enter the new catalog name.
Click on 'OK'
The organizer will use the new catalog. You will now see nothing is in the organzier.
See if you can access the .dat files. You may need to reboot.
You can select the previous catalog as follows...
Menu 'File->Catalog...'
Click on the previous catalog name
Click 'Open'
There is something not right with the security settings especially if you want multiple users to be able and access the catalog. As far as how things got messed up -- I have no idea. Some possible options are that one user has more rights than another user. The one with more rights created the files just fine but the other user has no way to read the files. Or someone was messing with the security settings.
Security settings in Windows can get very complex very fast. I hesitate attempting to walk through this can be done because there could be many factors which has caused this issue. You could have specific security settings on the files which override parent directory security settings. Or the parent directory security setting could simply be wrong.
You first need to determine if both users need write access to the catalog. If this is the case and they are not administrators, I would go ahead and set the security settings on the folder containing the catalog. You do need to be careful so you don't remove security settings such that you cannot even make changes to the security settings. Make sure you give full control to "This folder, subfolders, and files" in the Permission Entry dialog.
I would encourage you to look at the effective permissions on all files in the catalog after making any changes and before you start up PsE again. I have no idea what would happen if the security setting was wrong on a single file. This could cause a corrupted catalog depending on how PsE is written.

Corrupt Catalog Files. Can anyone help please?

My computer shut down unexpectedly, and now Lightroom 5 is giving me and message stating Corrupt Catalog Files. When I try to repair as suggested it says it has encountered problems reading or writing from discs when attempting to repair. Can anyone help please?

How recent is your backup?

Lightroom Corrupt Catalog problems- Help!

Lightroom Corrupt Catalog problems reading/writing from disk when attempting to repair - Help! I have my LR box in hand and my product keys and license info but can't find the disk. I'm assuming this is the only way to repair. Suggestions, Comments are welcome and appreciated.
Thanks in advance!!!

Corrupt catalog will not be fixed by re-installing the Lightroom software (although if I were you, I'd still find that disk!)
If I were you, I would first check a recent backup of your catalog file, and see if that will open (double-click on it in your operating system). If that opens properly, I would just use that file.
If it doesn't open properly, then one trick that sometimes works is to open a blank catalog in Lightroom, then File->Import from Another Catalog and point to the catalog file.
And if that doesn't work, please write back with a lot more details, including operating system, version of Lightroom, and much more detail abou

Peculiar Problem: Corrupt Catalog?

1. The Basic Problem: In Lightroom 3.2 and now 3.3, when new images are downloaded, the folders appear in the list of folders (in the left-hand panel) and the same folders appear in the Lightroom_Library folder on my N drive. However, when Lightroom is closed and reopened, these folders no longer appear in the list of folders in the left-hand panel of Lightroom. The folders and their images are still on the N drive and can be accessed with Photoshop.
2. The two sets of imported images that have been a problem were shot in late October and late November. I had not taken any photos prior to that since August. I made three backups of my catalog in August long before I began to have the current problem.
3. I have synchronized my 2010 folder (which contains the problematic folders) in the list of folders in the left-hand panel. This action replaced the two missing folders shot in October and November in the list of folders; however, they both disappeared again when Lightroom was shut down and reopened.
4. I noticed that when I import test images and the folder name appears correctly in the list of folders in the left-hand panel and then turn Lightroom off and then on again, even though the folder disappears from the list of folders, the images themselves still appear on the screen, which means, does it not, that the images are in the catalog even though they are not showing in the folders list.
Following up on this, I imported some test images and gave them a unique keyword. I then shut Lightroom down and reopened it and that folder was missing from the list of folders in the left-hand column, but I was able to bring the images up by searching for the photos using the unique keyword that I had given them, which is, I think, more evidence that the images are in the catalog.
5. I spoke with an Adobe customer support representative, and as a last resort, he created a test catalog into which he imported new images. The images appeared in the list of folders. Lightroom was then shut down and reopened, and the folder was still in the list of folders in the left-hand panel. Based on this experiment, the Adobe representative concluded that my catalog was corrupt, and that I would need to import my current catalog into a new catalog to solve this problem.
6. Except for this one problem, the catalog seems to function normally, and I have checked the integrity of the catalog and this has turned up no problems. I have not received any warnings from Lightroom 3 to indicate that the catalog is corrupted.
6. Since I thought I was dealing with a corrupt catalog, I substituted one of my backups from August, which was made at a time when I was having no problems with the catalog; however, I am having the same problem with this backup catalog. Does this suggest that the problem may not be that the catalog which first showed the problem is corrupt?
7. The support representatives that I spoke with gave me somewhat different recommendations for transferring this catalog to a new catalog. One suggested that I create a new empty catalog and then combine the corrupt catalog with the new one. In this case wouldn’t the new catalog be corrupted too?
If I have to accept that the problematic catalog is corrupt, how exactly do I transfer the contents of the corrupt catalog to a new catalog without losing anything?
Thanks.
Roger

Create a brand-new test catalog and try importing the two folders into it. If they still disappear it is something to do with those folders or their contents. If they seem ok, then it could be something wrong with your catalog. When importing make sure you've done right-click Include Parent Folder enough times to make it the same relative depth of folders as your regular catalog.
I assume you've done an optimize catalog with test-integrity enabled.
I have seen problems in the past with folders that had some weird character or were longer than the rest so see if that is the case for these two. When the folders do happen to be visible, you might try renaming them (within LR) to something much shorter and see if they work, then.
Before messing around too much, I'd write XMP files (select all / Metadata / Write Metadata for Files) for all the photos in these two folders, so at some point if things go completely haywire, you can at least reimport the photos with their current set of adjustments applied although linkages to them in collections and keywords and such may not be as lucky.
You can also use File / Import from Catalog... and File / Export to Catalog... to create working copies of just those two folders in another catalog but if the catalog, itself, is corrupted, that may only propagate the corruption.

A Peculiar Problem: Corrupt catalog?

1. The basic problem: In Lightroom 3.2 and now 3.3, when new images are downloaded, the folders appear in the list of folders (in the left-hand panel) and the same folders appear in the Lightroom_Library folder on my N drive. However, when Lightroom is closed and reopened, these folders no longer appear in the list of folders in the left-hand panel of Lightroom. The folders and their images are still on the N drive and can be accessed with Photoshop.
2. The two sets of imported images that have been a problem were shot in late October and late November. I had not taken any photos prior to that since August. I made three backups of my catalog in August long before I began to have the current problem.
3. I have synchronized my 2010 folder (which contains the two problematic folders) in the list of folders in the left-hand panel. This action replaced the two missing folders shot in October and November in the list of folders; however, they both disappeared again when Lightroom was shut down and reopened.
4. I noticed that when I import test images and the folder name appears correctly in the list of folders in the left-hand panel and then turn Lightroom off and then on again, even though the folder disappears from the list of folders, the images themselves still appear on the screen, which means, does it not, that the images are in the catalog even though they are not showing in the folders list.
Following up on this, I imported some test images and gave them a unique keyword. I then shut Lightroom down and reopened it and that folder was missing from the list of folders in the left-hand column, but I was able to bring the images up by searching for the photos using the unique keyword that I had given them, which, I think, is more evidence that the images are in the catalog.
5. I spoke with an Adobe customer support representative, and as a last resort, he created a test catalog into which he imported new images. The images appeared in the list of folders. Lightroom was then shut down and reopened, and the folder was still in the list of folders in the left-hand panel. Based on this experiment, the Adobe representative concluded that my catalog was corrupt, and that I would need to import my current catalog into a new catalog to solve this problem.
6. Except for this one problem, the catalog seems to function normally, and I have checked the integrity of the catalog and this has turned up no problems. I have not received any warnings from Lightroom 3 to indicate that the catalog is corrupted.
6. Since I thought I was dealing with a corrupt catalog, I substituted one of my backups from August, which was made at a time when I was having no problems with the catalog; however, I am having the same problem with this backup catalog. Does this suggest that the problem may not be that the catalog which first showed the problem is corrupt?
7. The support representatives that I spoke with gave me somewhat different recommendations for transferring this catalog to a new catalog. One suggested that I create a new empty catalog and then combine the corrupt catalog with the new one. In this case wouldn’t the new catalog be corrupted too?
If I have to accept that the problematic catalog is corrupt, how exactly do I transfer the contents of the corrupt catalog to a new catalog?
Thanks.
Roger

Create a brand-new test catalog and try importing the two folders into it. If they still disappear it is something to do with those folders or their contents. If they seem ok, then it could be something wrong with your catalog. When importing make sure you've done right-click Include Parent Folder enough times to make it the same relative depth of folders as your regular catalog.
I assume you've done an optimize catalog with test-integrity enabled.
I have seen problems in the past with folders that had some weird character or were longer than the rest so see if that is the case for these two. When the folders do happen to be visible, you might try renaming them (within LR) to something much shorter and see if they work, then.
Before messing around too much, I'd write XMP files (select all / Metadata / Write Metadata for Files) for all the photos in these two folders, so at some point if things go completely haywire, you can at least reimport the photos with their current set of adjustments applied although linkages to them in collections and keywords and such may not be as lucky.
You can also use File / Import from Catalog... and File / Export to Catalog... to create working copies of just those two folders in another catalog but if the catalog, itself, is corrupted, that may only propagate the corruption.

Cannot repair corrupted catalog.

My Mac crashed in the middle of editing images in Lightroom 5. It just completely froze (no keyboard lights, no cursor moving, etc.) and had to have a hard shut down. I didn't get the option to submit a crash report. When I reopened at first it said it couldn't write to the catalog because it was on an external drive, but the second time I opened the catalog it simply said that it cannot open due to an unexpected error. I looked online for solutions and I do not have a .lock file in the folder (so it's not that) and when I try to open it while checking for catalog integrity it says to repair it, but then says it is temporarily unable to repair corrupt catalog. I've tried copying the catalog to a new location to see if that would do the trick, but no dice. Does anyone have any suggestions!? I just lost a week's worth of work from my friends' wedding! Argh!

I presume you don't have a recent-enough catalog backup (?)
I bet you won't let that happen again..
Anyway, depending on what's wrong with the catalog, you may be able to recover develop settings (only) via a plugin called WreckHover (free, by me).
In addition to catalog, settings may be stored in:
* xmp if you've saved metadata (if not, I bet you won't let that happen again either) - recovered when importing new photos, or reading metadata (Library menu) of already-imported photos.
* exported versions (if exported with all metadata) - you can recover settings from those via the same plugin: WreckHover.
Note: you'll need to restore a backup catalog first, or start a new one if no backups (really?).
Good luck,
Rob

Best way to restore corrupted catalog

The catalog apparently got corrupted in PSE 12 when I attempted to move some items from C to an external drive, and the program crashed during that process. The last backup in PSE was about 3 weeks ago. I also have an Acronis backup of C drive from a couple days before the failed "move" of files.
I discovered the problem when trying to run a new full backup: it got to 76% after 18 hours and created a partial backup that was 759 GB plus. The prior backup was only 309 GB. There have not been more that 2 GB of additions since the last backup. The only other change I know of is the failed "move" of files within PSE from C to the external drive where all of the other photo files reside.
Should I try to simply copy and paste the Acronis version of catalog and replace corrupted catalog? Or should I restore prior PSE backup?

The failed 'move' generally does not crash the organizer. What you can check is that a 'move' from the organizer first copies files to the destination drive or master folder, and creates a journal to update the database. If the copying process succeeds, then the original photos are deleted and the catalog updated. If the organizer does not crash, the result will be a partly copied library, but no change to the catalog. In your case, we cannot be sure what happened to the database. Since you were able to attempt a backup, the catalog was useable but there is a mystery about the 759 GB instead of 309. I suppose you already tried a 'repair anyway' for the catalog.
I would first check that the files you wanted to move have not really been moved, and that only a part of them has been copied to the destination drive.
If that's the case, I would delete the copies (or move them in a different locotion than your target location).
Restoring the catalog from the Acronis backup would be the next step. Remember that the catalog is the whole folder containing the database, catalog.pse12db. You can choose to restore to the original location or elsewhere. If elsewhere, double click on on the catalog.pse12db file to open the organizer with the Acronis catalog.
Report about your progress...

After upgrading to LR5.5 and got a corrupted catalog

Yesterday I upgraded to LR5.5 and got a corrupted catalog. Going back to LR5.4 and using an old catalog did not solve the problem. All catalog are corrupt all of a sudden.
Does anybody have a clue?

This solved my problem with FF5 being offline. Many thanks.

Multiple Event Viewer Error Ids, Corrupt Catalogs, System not working right. Please help.

Since I could not find a list of the Event Ids that was accurate at all or not too general as to be useless and Microsoft won't let us know how to fix these ourselves without having a programming degree, I am begging for help from anyone who can help
me get my computer working right again. I have some important things to get done which I can't do without my computer working. I have tried to get what I could get but I am blocked from many files which makes it difficult to get info. Please help. I appreciate
any help I can get. Thank you,
WhiteFox42
I am not sure which one is more important.
Event id 20
Installation Failure: Windows failed to install the following update with error 0x80070643: Update for Microsoft .NET Framework 4 on Windows XP, Windows Server 2003, Windows Vista, Windows 7, Windows Server 2008, Windows Server 2008 R2 for x64-based Systems
(KB2468871).
Event id 11
Possible Memory Leak. Application (C:\Windows\System32\svchost.exe -k LocalServiceNetworkRestricted) (PID: 476) has passed a non-NULL pointer to RPC for an [out] parameter marked [allocate(all_nodes)]. [allocate(all_nodes)] parameters are always
reallocated; if the original pointer contained the address of valid memory, that memory will be leaked. The call originated on the interface with UUID ({3f31c91e-2545-4b7b-9311-9529e8bffef6}), Method number (20). User Action: Contact your application
vendor for an updated version of the application.
Event id 455
taskhost (1348) WebCacheLocal: Error -1811 (0xfffff8ed) occurred while opening logfile R:\User\App Data\Roaming\Microsoft\Templates\Local\Microsoft\Windows\WebCache\V01.log.
Event Xml:
Event id 505
wuaueng.dll (1012) SUS20ClientDataStore: An attempt to open the compressed file "C:\Windows\SoftwareDistribution\DataStore\DataStore.edb" for read / write access failed because it could not be converted to a normal file. The open file operation
will fail with error -4005 (0xfffff05b). To prevent this error in the future you can manually decompress the file and change the compression state of the containing folder to uncompressed. Writing to this file when it is compressed is not supported.
Event id 513
Cryptographic Services failed while processing the OnIdentity() call in the System Writer Object
Event id 1000
Faulting application name: IEXPLORE.EXE, version: 11.0.9600.16428, time stamp: 0x525b664c
Faulting module name: IEFRAME.dll, version: 11.0.9600.16476, time stamp: 0x52944cf2
Exception code: 0xc0000005
Fault offset: 0x00025f1d
Faulting process id: 0x1854
Faulting application start time: 0x01cf0735f0e5f0c7
Faulting application path: C:\Program Files (x86)\Internet Explorer\IEXPLORE.EXE
Faulting module path: C:\Windows\system32\IEFRAME.dll
Report Id: e3dc1e9a-733f-11e3-b920-00215a2af202
Event id 1000
Faulting application name: msiexec.exe, version: 5.0.7601.17514, time stamp: 0x4ce79d93
Faulting module name: msvcrt.dll, version: 7.0.7601.17744, time stamp: 0x4eeb033f
Exception code: 0xc0000005
Fault offset: 0x00000000000035e1
Faulting process id: 0x1030
Faulting application start time: 0x01cf01b77867a358
Faulting application path: C:\Windows\system32\msiexec.exe
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: f7253b17-6daa-11e3-b944-00215a2af202
Event id 1002
Computer:      w7mar-64 "I don't know why it has computer as this when it should not be."
Description:
The IP address lease 192.168.200.195 for the Network Card with network address 0x08002742F261 has been denied by the DHCP server 192.168.200.1 (The DHCP Server sent a DHCPNACK message).
Event id 1008
The Windows Search Service is starting up and attempting to remove the old search index {Reason: Index Corruption}.
Event id 1008
Computer:      w7mar-64
Description:
An errorUser:          LOCAL SERVICE
occurred in initializing the interface. The error code is: 0x2.
Event id 1014
User:          NETWORK SERVICE
Computer:
Description:
Name resolution for the name wpad.westell.com timed out after none of the configured DNS servers responded.
Event id 1015
User:          N/A
Computer:      w7mar-64
Description:
Event ID 1013 for the Windows Search Service has been suppressed 7 time(s) since 12:04:10 PM. This event is used to suppress Windows Search Service events that have occurred frequently within a short period of time. See Event ID 1013 for further details
on this event.
Event id 1015
Failed to connect to server. Error: 0x8007043C
Event id 1018
The description for Event ID 1018 from source EvntAgnt cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1020
Updates to the IIS metabase were aborted because IIS is either not installed or is disabled on this machine. To configure ASP.NET to run in IIS, please install or enable IIS and re-register ASP.NET using aspnet_regiis.exe /i.
Event id 1028
Windows Installer has determined that its configuration data cache folder was not secured properly. The owner of the key must be either Local System or Builtin\Administrators. The existing folder will be deleted and re-created with the appropriate security
settings.
Event id 1101
.NET Runtime Optimization Service (clr_optimization_v4.0.30319_32) - Failed to compile: System.Web.Entity.Design, Version=3.5.0.0, Culture=Neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil . Error code = 0x80010108
Event id 1500
The description for Event ID 1500 from source SNMP cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
Event id 1530
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
6 user registry handles leaked from \Registry\User\S-1-5-21-2959539970-205720217-4182857889-1000:
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies\Microsoft\Windows\CurrentVersion\Internet Settings
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Microsoft\Internet Explorer\Main
Process 1020 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-2959539970-205720217-4182857889-1000\Software\Policies
Event id 3028
Context: Windows Application, SystemIndex Catalog
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3029
Context: Windows Application, SystemIndex Catalog
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 3036
The content source <csc://{S-1-5-21-2959539970-205720217-4182857889-1001}/> cannot be accessed.
Event id 3036
No protocol handler is available. Install a protocol handler that can process this URL type. (HRESULT : 0x80040d37) (0x80040d37)
Event id 4104
Description:
The backup was not successful. The error is: Access is denied. (0x80070005).
Event id 4228
TCP/IP has chosen to restrict the scale factor due to a network condition. This could be related to a problem in a network device and will cause degraded throughput.
Event id 4321
The name "WHITEFOXPC     :0" could not be registered on the interface with IP address 192.168.1.21. The computer with the IP address 192.168.1.19 did not allow the name to be claimed by this computer.
Event id 4373
The description for Event ID 4373 from source NtServicePack cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
Event id 4879
MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system WHITEFOXPC.
Event id 6000
The winlogon notification subscriber <GPClient> was unavailable to handle a notification event.
Event id 6006
The winlogon notification subscriber <TrustedInstaller> took 186 second(s) to handle the notification event (CreateSession).
Event id 7000
The Windows Audio service failed to start due to the following error:
A privilege that the service requires to function properly does not exist in the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view
the service configuration and the account configuration.
Event id 7001
The Computer Browser service depends on the Server service which failed to start because of the following error:
The dependency service or group failed to start.
Event id 7010
The index cannot be initialized.
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 7023
The Block Level Backup Engine Service service terminated with the following error:
%%-2147024713
Event id 7024
The Windows Search service terminated with service-specific error %%-1073473535.
Event id 7026
The following boot-start or system-start driver(s) failed to load:
aswKbd
aswRvrt
aswSnx
aswSP
aswTdi
aswVmm
discache
spldr
Wanarpv6
Event id 7030 & 7031
The dldw_device service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly.
Event id 7032
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Windows Installer service, but this action failed with the following error:
An instance of the service is already running.
Event id 7040
The search service has detected corrupted data files in the index {id=4700}. The service will attempt to automatically correct this problem by rebuilding the index.
Event id 7042
The Windows Search Service is being stopped because there is a problem with the indexer: The catalog is corrupt.
Details:
   The content index catalog is corrupt. (HRESULT : 0xc0041801) (0xc0041801)
Event id 8210
An unspecified error occurred during System Restore: (Installed Java 7 Update 45). Additional information: 0x80070003.
Event id 9000
The Windows Search Service cannot open the Jet property store.
Details:
   0x%08x (0xc0041800 - The content index database is corrupt. (HRESULT : 0xc0041800))
Event id 10005
DCOM got error "1084" attempting to start the service MSIServer with arguments "" in order to run the server:
{000C101C-0000-0000-C000-000000000046}
Event id 10010
15 of these with different server codes which I can't copy unless I copy all the details.
The server {3EEF301F-B596-4C0B-BD92-013BEAFCE793} did not register with DCOM within the required timeout.
Event id 12348
Volume Shadow Copy Service warning: VSS was denied access to the root of volume \\?\Volume{8e79517c-6c41-11e3-b621-cb03f0618d54}\. Denying administrators from accessing volume roots can cause many unexpected failures, and will prevent VSS from functioning
properly. Check security on the volume, and try the operation again.
Event id 15006
9 of these.
Description:
Owner of the log file or directory \SystemRoot\System32\LogFiles\HTTPERR\httperr1.log is invalid. This could be because another user has already created the log file or the directory.
Event id 31004
33 of tese.
The DNS proxy agent was unable to allocate 0 bytes of memory. This may indicate that the system is low on virtual memory, or that the memory manager has encountered an internal error.
The End.
Kimberly D. White-Fox

Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key
(alternative is Select Start, All Programs, Accessories, System Tools, System Information). Select File, Export and give the file a name noting where it is located. The system creates a new System Information file each time system information is accessed.
You need to allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode.
Please upload and share with everyone copies of your System and Application logs from your Event Viewer to your Sky Drive and post a link here.
To access the System log select Start, Control Panel, Administrative Tools, Event Viewer, from the list in the left side of the window select Windows
Logs and System. Place the cursor on System, select Action from the Menu and Save All Events as (the default evtx file type) and give the file a name. Do the same for the Applications log. Do not provide filtered files.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Some Event Viewer reports are generated solely because the computer is in safe mode or safe mode with networking. You have at least one example of this in your long list. If you do not see the same report for a time when
the computer was in normal mode then it can be disregarded.
You will find some general advice on interpreting Event Viewer reports here:
http://www.gerryscomputertips.co.uk/syserrors5.htm
Hope this helps, Gerry

How can I find and correct corrupt Catalog files on Elements 9?

I was trying to create a simple slideshow with sound when first my computer warned of low memory (something that doesn't seem plausible), and then Photoshop Elements 9 and the associated organizer crashed. When I brought it back, several photos were "grayed out" and my organizer is completely frozen. The error suggests that there are corrupt files. I tried to follow the instructions on the website, but cannot find any sort of Catalog menu or means of changing anything in the catalog or organizer as indicated in the troubleshooting and restoration instructions. Any use of the organizer is frozen.
What am I missing? Thanks to all for your ideas.

If you start up organizer while holding down the shift key, that should take you to the catalog manager where you can repair and optimize your catalog.

How can I fix a corrupt catalog in photoshop elements 8?

I am getting a catalog corrupt error in photoshop elements 8. Is it really corrupt or is my version too old now or something? I have years worth of photos in this catalog. The photos are on my hard drive, but is there any way to repair or reconstruct the catalog? Are the tags and albums saved somewhere?

Hi,
The details about the tags and albums are all stored within the catalog so you could try to repair it.
If you can't load the organizer, try holding down the shift key while you start the organizer and it should open the Catalog Manager and jump to step 3 below.
Load the organizer
From the File menu, select Catalog - that should open the Catalog Manager.
Select you current catalog and click on the Repair button
When that has finished, click on the Optimize button
When that is done, click on the Cancel button to close the Catalog Manager.
Good luck
Brian

Corrupted catalog

Similar Messages

Maybe you are looking for