Corrupted iTunes xml file. HELP!

Somehow my xml file got corrupted. So, whenever opening iTunes now, I get an error message about this and then there is no correct sync to my AppleTV. furthermore, it is creating directories in my AppleTV window (duplicating them i mean). My AppleTV now reports no files on it, etc.
I have searched for an xml file in iTunes in programs director, but no luck. anyone know what to do? seems like i need to destroy corrupted file and start over, but really not sure what to do. tried uninstalling and re-installing iTunes, but this did nothing. thanks!

The central file to everything is the library.itl file in your Music > iTunes folder. Start iTunes with the option key held down and guide it to that file. If you're lucky then it will be the one you need. If not then it is hard to determine where the file might be. Normally an update should not affect something like the iTunes library but if your file directory was having issues (did you verify with Disk Utility first?) then who knows? This is why one backs up before installing system software updates.
If you have a backup then let us know. You may be able to rescue a copy of the iTunes Library.itl from that and replace the bad copy in your iTunes folder.
Since your media are scattered about it may be a painstaking task adding them all again but it may come down to that. Again, back up...

Similar Messages

Itunes xml file corruption

I'd like to ask the community if anyone else is having trouble with corruption of their iTunes XML library file?
Back on October 20th, my iTunes library completely imploded: roughly one third of all songs stopped playing, all my Digital Copy movies refused to play. I had just upgraded my iPad to iOS 6 and pretty much everything imploded. The solution was to basically delete the iTunes XML files, re-install the software and then re-import all my uploaded music.
Yesterday, I connected one of my iPod Classics and saw the same error messages that started the first round of trouble: there were 7 files that iTunes claimed it could not sync with my Classic because they were the "wrong format". I checked each in turn and they turned out to be from 3 of my 650 or so albums. In each case I could click on the iTunes entry and nothing would play: no error was reported.
In each case if I pulled up the track information, I could see that the references for these 7 songs had been corrupted. So for example, the track "We Didn't Start The Fire", from Billy Joel's album, "Storm Front", had "Song Information" that said it was actually located in /iTunes/Crowded House/ - no album name or song name were included. Every one of the 7 "wrong format" songs had corrupted "location data" like this. The choice of the tracks that were corrupted appears to be largely random. However, I have noticed that corruption only seems to occur when I add new material to my iTunes database.
The first instance was a complete meltdown and required a clean re-installation of iTunes - literally hundreds of song entries were corrupted. This time around only 7 seem to have been impacted [though i concede it could be more].
I tried asking Apple support for help and although they were able to walk me through the repair process, they have been unable to explain why this corruption is taking place. I wonder if anyone has any ideas? For what little it may help:-
I am running iTunes 10.7(21) on a Mac Mini (OS/X 10.7.5(11G63)) with the 2.3GHz Core i5 and 8Gb of RAM.
My iTunes Library "XML" file is in my local home directory [default location], but because it's now well over 200Gb in size, all the music files for iTunes are stored in a QNAP NAS [works fine, local Apple folk helped me configure it].
It's difficult to triage exactly what's happening without having access to something like XMLspy and being able to work through the iTunes XML file piecemeal, but it does look like something during the "add songs to database" process is corrupting that file, and, interestingly, it adds new content fine - it's existing entries that get corruption.
My music library is not *that* big: the XML file is 15.2Mb on disc, iTunes is currently holding 659 Albums an about 7827 songs.
Does anyone else have ideas as to what might be causing this? It seems to be a relatively recent development, and since I rebuilt the database completely 6 weeks ago, this most recent damage is definitely a recent thing.
Suggestions gratefully received.

The XML file is a readable subset of the data in the main library file. If the library database becomes corrupt the easiest approach is to restore an earlier version.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
The images are from Windows XP but you get the idea. Your Mac library file may omit the .itlextension.
See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
When you get it all working I'm told Carbon Copy Cloner can do the equivalent of this Windows based backup tip.
tt2

Picasa and corrupt albumdata.xml file

For several days, I have been trying to install Picasa on my Mac. I used to use Picasa on my PC but switched to iPhoto when I got a Mac and have been using iPhoto for the last several months. I would like to add Picasa so I can access some of the sharing features that aren't available on iPhoto. However, every time I try to load Picasa, it launches and then says I have a corrupted albumdata.xml file. I have no problem when I use iPhoto -- there appears to be no corruption. I have tried to repair/rebuild the database in iPhoto several times and have followed directions from some Picasa discussion forums about using Text Wrangler to find &s and other characters that might be causing the problem. Even when I have deleted the photos that appear to have the problems, Picasa still tells me that the file is corrupted. I have called Apple about this, but they have been no help since iPhoto is working fine and it is not their product that is giving the error message. I would love to use Picasa, but there's something that's not working right.
I know others have had the exact same problem and seem equally frustrated. According to Picasa, it is supposed to "play well" with iPhoto, but what happens when it doesn't?
I appreciate any help you can lend. Thanks.

Well - and it's just a thought - you could easily post them on Google+, or Flickr, or SmugMug or any other photosharing site on the entire Internet.
On Google+ click on the Photos icon on the sidebar and then Add Photos - the bit in Red. That give you the uopload page and you can 'Select Photos to Upload from Your computer'
Thereafter... the first one of these
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.
Regards
TD

Multiple iTunes XML Files?

Hello everyone. I have a problem. I want to move my iTunes library over to my external hard drive. DO NOT post a link on how to do this. I have read all of them. The problem is that I have multiple iTunes XML files. Not just one. I don't know what to do. Can i delete them? Can i combine them or something???

It is difficult to understand your question as the the number of xml files does not seem to be related to your question. If you have a complex question then you need to explain it fully with your current iTunes set up.
The simple answer assuming a default iTunes set up is.
1. Ensure all your music is in the iTunes Music folder in the iTunes folder. Consolidate if it is not.
2. With iTunes closed, Copy the iTunes folder to the external drive.
3. Hold down the shift key (Windows) and start iTunes, keep holding the shift key until you are prompted to choose a library. Naviagte to the iTunes folder on the external drive and choose iTunes Library.itl.
If you ever start iTunes with the drive disconnected it will default back to the internal drive and you have to do another shift key start to connect to the external drive.

Importing itunes xml file..

Since the other day, about every 1 in 4 times I open itunes, it will stall, then say "importing itunes xml file" before giving me a message that it's a damaged file and then allowing the program to pop up with all the default first-time playlists etc. Why is this happeneing? What can I do to fix this?

Heya. I'd first make sure you're running the latest version of iTunes:
http://www.apple.com/itunes/download/
That alone could be the issue. Always have a current backup of your files when experimenting with the XML file as well.

TS1192 'Could not read the iPhoto Library. The library at [file path] has a corrupted AlbumData.xml file.'

Got this msh from Piasa...any ideas? 'Could not read the iPhoto Library. The library at [file path] has a corrupted AlbumData.xml file.'

Contact Adobe support - that is not an iPhoto message - in general Piasa has no ability to access the iPhoto library - there have been hacks but often they do not worka nd can cause problems
You need to user either Picasa or iPHoto - using both on the same photos is problematic
LN

Help!! Aperture corrupting my itunes XML file

I am experiencing a weird problem with my itunes music library seemingly being corrupted by Aperture, Apple's image processing application. The file path to my music file is being overwritten in the itunes music library XML file with a file path to one of my photos stored in Aperture! Has anyone experienced this issue? And more importantly, does anyone have a solution to the problem.
Here is what's happening:
1. I click on a music file in itunes to play it. Nothing happens - no music plays, no error message is displayed.
2. I open the itunes XML music library.XML file to see the path that itunes is using to locate the music file. I notice that the location key for the music file has been overwritten and now points to a random jpeg file that I have stored in my Aperture library.
Here is what the XML entry looks like for the music file. Note the path referenced in the location key. It no longer points to the audio file in my itunes music directory. Instead it points to a jpeg file in my Aperture library.
<key>1167</key>
<dict>
<key>Track ID</key><integer>1167</integer>
<key>Name</key><string>Hash Pipe</string>
<key>Artist</key><string>Weezer</string>
<key>Album</key><string>Hash Pipe (CDS)</string>
<key>Genre</key><string>Alternative</string>
<key>Kind</key><string>MPEG audio file</string>
<key>Size</key><integer>1152</integer>
<key>Total Time</key><integer>185704</integer>
<key>Track Number</key><integer>1</integer>
<key>Year</key><integer>2001</integer>
<key>Date Modified</key><date>2007-06-15T17:36:27Z</date>
<key>Date Added</key><date>2008-03-13T21:02:47Z</date>
<key>Bit Rate</key><integer>192</integer>
<key>Sample Rate</key><integer>44100</integer>
<key>Comments</key><string> </string>
<key>Persistent ID</key><string>285E19D7CE6E8007</string>
<key>Track Type</key><string>File</string>
<key>Location</key><string>file://localhost/Users/ericwhalen/Pictures/Aperture%20Library.aplibrary/Glacier% 20Pix.approject/2007-06-15%20@%2009:27:19%20AM%20-%201.apimportgroup/IMG8045/IMG8045.JPG.apfile</string>
<key>File Folder Count</key><integer>6</integer>
<key>Library Folder Count</key><integer>3</integer>
</dict>
Has anybody seen this behavior before?
Thanks,

The file path to my music file is being overwritten in the itunes music library XML file
Okay but iTunes does not use the iTunes library.xml.
It is created for other apps to use the iTunes library.
What is the problem you are having?

Corrupt iTunes Library file (.itl AND .xml)

I just got a new mac and decided not to put my music on it. Instead I kept my entire itunes library on an external hard drive. At some point, my hard drive must have disconnected while using iTunes and the library files became corrupt. When I see the files (in finder) on my mac, their size = Zero KB and their "kind of" = Alias. When I check out those same files on my windows computer, it says their actual numerical size (probably before they became corrupt). I've read that you can restore playlists with the .xml file but that is also corrupt.
Is there any way at all to repair/recover this library? PLEASE HELP I've worked very hard on creating this library.

I had this problem repeatedly and found that it seems to happen when you exit or restart Windows while iTunes is running. Note that when you close the iTunes window the program actually continues to run for a significant amount of time after its window disappears and even after the "saving iTunes library" message disappears. Basically iTunes starts writing out its library and then gets interrupted during the shutdown, causing the corruption.
I have solved the problem with the very pathetic solution of bringing up Task Manager, switching to the Processes tab, and waiting until the iTunes.exe process is gone from the list. Then I know it is done writing and it's safe to exit or restart Windows. I have never had corruption when I have done this.
(This isn't completely consistent with the posts above since one claimed that they restored a known good library after reboot and still had the problem. Perhaps that is something else, or perhaps the known good library had actually been corrupted before it was saved.)
Note that when the *.itl file is corrupted this way, it is pretty much always the case the the *.xml file is also corrupted. Since the XML file is text, iTunes is able to read what there is of it to rebuild the *.itl, but since the *.xml file is truncated, a lot of songs will be missing. It's a bit puzzling that Apple chose a library format that redundantly writes to two separate files but they write them out simultaneously so if one gets corrupted the other one almost always is corrupted as well.
The good news is that this problem is beyond simple to solve for Apple. The bad news is that for some inexplicable reason they keep releasing version after version with this same serious bug.

ITunes xml file corrupt

I'm far from a genius when it comes to this stuff, but there's something seriously wrong with my file "itunes library.xml". I only know because I tried running Doug's applescript to eliminate duplicate files from iTunes and the results contained files that were previously deleted. I looked at the xml file and see that there are a whole bunch of songs included in the file from a directory that no longer exists. Do I have any options except starting from scratch with iTunes? Thank you.

Quit iTunes.
Delete the iTunes library.xml.
Restart iTunes. The xml will get rebuilt.
iTunes does not use this file.
It is created only for other apps to use.

Why doesn't Sonos recognize iTunes .xml file?

My iTunes path and Sonos path are identical (and therefore share the same library, which has no problems) however my iTunes playlists (.xml file) are in the exact same location but are not recognized by Sonos. Any help is appreciated!

Hello gail6068,
Thanks for using Apple Support Communities.
First please try the troubleshooting steps in the article below:
iPod classic Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/classic/
If the issue persists, then follow the steps in the following support article.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Take care,
Alex H.

ITunes xml file search/ access {on user's computer} ~ step 1

Building a RichMediaAnnotaion (RMA) JukeBox.
This will be hosted in a PDF.
Tools: Flash CS5.5 & Acrobat X Pro
The Juke Box will read the User's iTunes Library.xml file
(once JavaScript affirms it is present, i.e. User uses iTunes).
Of many steps, I am researching a JavaScript to locate (gain access) to
said iTunes Library.xml files (both PC / MAC).
In this file-search objective the four (4) locations are known; iTunes Library.xml (see below).
Thanks in advance for your help...
This is Step 1... the current goal;
How to construct a full script to address all known locations (4).
1) enable search when PDF page is entered
2) search for the appropriate iTunes Library.xml file
3) if found pass path to "JukeBox" script (in development, future Step)
4) else... stop
iTunes Library.xml locations;
Mac OS X:     /Users/username/Music/iTunes/iTunes Library.xml
Windows XP     \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Library.xml
Windows Vista     \Users\username\Music\iTunes\iTunes Library.xml
Windows 7     \Users\username\Music\iTunes\iTunes Library.xml
That is the current task at hand......
Thanks for your feedback!
~ ~
As a reference, further researching Steps are noted below:
display Artist list
          drill down to said Artist songs
Display Album Artwork / when available, else JukeBox images.png(s)
Play music
Any an All insight is greatly appreciated.
D~

JavaScript embedded in a PDF cannot read arbitrary files from a local hard drive, neither can a SWF.

Error in my build.xml file (help with spotting syntax error requested)

Hi
I have written an XML file called build.xml for one of my applications. My XML editor complains that there is an error at the last line of the XML file, but I simply find it unable to correct the errror.
It says:
Fatal error:Build.xml[76:3-9]: End-Tag without start-tag
The XML file itself:
<project basedir="." default="deploy" name="concepts">
<property name="src.dir" value="src"></property>
<property name="build.dir" value="${basedir}/build"></property>
<property name="build.lib" value="${build.dir}/lib"></property>
<property name="dist.dir" value="dist"></property>
<property name="classes.dir" value="${build.dir}/classes"></property>
<property name="build.etc" value="${src.dir}/etc"></property>
<property name="build.resources" value="${src.dir}/resources"></property>
<property name="lib.dir" value="lib"></property>
<property name="web-inf.dir" value="WEB-INF"></property>
<property name="war.name" value="concepts"></property>
<property file="../common.properties"></property>
<target name="init">
<mkdir dir="${build.dir}"></mkdir>
<mkdir dir="${classes.dir}"></mkdir>
<mkdir dir="${dist.dir}"></mkdir>
</target>
<target name="deploy" depends="clover-yes, clover-no">
<javac srcdir="${src.dir}" destdir="${classes.dir}" classpath="${libs}" debug="off" optimize="on" deprecation="on" compiler="${compiler}">
<include name="org/apache/commons/fileupload/**/*.java" />
<include name="com/portalbook/portlets/**/*.java" />
<include name="com/portalbook/portlets/content/**/*.java" />
</javac>
<target depends="init" name="compile">
<javac debug="true" deprecation="true" destdir="${classes.dir}" optimize="false">
<src>
<pathelement location="${src.dir}"></pathelement>
</src>
<classpath>
<fileset dir="${lib.dir}">
<include name="*.jar">
</include>
</fileset>
</classpath>
</javac>
</target>
<target depends="compile" name="war">
<war destfile="${dist.dir}/${war.name}.war" webxml="WEB-INF/web.xml">
<classes dir="${classes.dir}"></classes>
<lib dir="${lib.dir}"></lib>
<webinf dir="${web-inf.dir}"></webinf>
</war>
</target>

<jar jarfile="${build.lib}/concepts-lib.jar">
<fileset dir="${classes.dir}"></fileset>
</jar>
<jar jarfile="${build.lib}/concepts.war" manifest="${build.etc}/concepts-war.mf">
<fileset dir="${build.resources}/concepts-war"></fileset>
</jar>

<copy todir="${build.resources}/concepts-ear">
<fileset dir="${build.lib}" includes="concepts.war,concepts-lib.jar"></fileset>
</copy>
<jar jarfile="${build.lib}/concepts.ear">
<fileset dir="${build.resources}/concepts-ear" includes="concepts.war,concepts-lib.jar">
</fileset>
</jar>
<target depends="deploy" name="explode">
<taskdef classname="org.jboss.nukes.common.ant.Explode" classpath="${libs}" name="explode"></taskdef>
<explode file="${build.lib}/concepts.ear" name="concepts.ear" todir="${build.lib}/exploded"></explode>
</target>
<target depends="war" name="all"></target>
<target name="clean">
<delete dir="${build.dir}">
</delete>
<delete dir="${dist.dir}">
</delete>
</target>
</project>
I am a little inexperienced in XML files. So I am unable to spot the error.
I would greatly appreciate it, if some kind soul were to help me out.
thanks a lot

The tag
<target name="deploy" depends="clover-yes, clover-no">...is never closed.
close that tag:
<target name="deploy" depends="clover-yes, clover-no">
     <javac srcdir="${src.dir}" destdir="${classes.dir}" classpath="${libs}" debug="off" optimize="on" deprecation="on" compiler="${compiler}">
          <include name="org/apache/commons/fileupload/**/*.java" />
          <include name="com/portalbook/portlets/**/*.java" />
          <include name="com/portalbook/portlets/content/**/*.java" />
     </javac>
</target>Second error is that the depends in there (clover-yes, clover-no) are not existing as targets in your xml.

Wrong path changes in Itunes XML file

hi there,
My Itunes library (9.0.2) is stored locally on my macbook, although actual files are on a network attached storage that I access through AFP. This share is mounted automatically when the mac starts. Everything was working perfectly fine until a few days ago (no major change to the library or mac), when my iphone synchonization started to report impossible to read on the device files.
After a few more investigations, I pinpointed some of the missing files, which were not missing but were replaced by other files (absolutely not linked to my media files).
the <key>Location</key> in the xml file was, for example
<key>Location</key><string>file://localhost/Volumes/David/docs/Me%CC%81dias/src/elodie2.jpg</string>
where it should have been something like
<key>Location</key><string>file://localhost/Volumes/David/media/music/albums/Damien%20Rice/9/09%20-%20Accid ental%20Babies.mp3</string>
Does anyone have a clue about what went wrong and how to circumvent this in the future ?
Thanks in advance

Oliver:
The simple answer is yes. Any changes you make to your RSS feed file (xml file) will eventually be updated by ITMS. Usually ITMS updates feed changes within 24 hours. However, the most recent changes I made in my feed files took almost 8 days before ITMS refreshed my listing.
One issue is clear. If you make changes to your image file, there is a high probability that when ITMS updates your database record, your listing in ITMS will show the broken link image for awhile. I've changed my image file twice, and each time, my ITMS listing showed the broken link image. Eventually the new image shows up, but it does take a long time for this day and age.
Good luck!

Flash XML file help

I am trying to add multiple flash files to my website...the
only way these seem to work is if the swf and corresponding xml
file are all on the root of the website directory. I would have
liked to organize them into files to sort.
My problem is that many of these flash files (mainly
purchased) have the same xml file, so I cannot use these together
on the root. Thus, I need to either rename in the flash the xml
file or figure out how to put into folders...please help!
-Josh

ANSWER: I figured it out myself. I am just replying to let
everybody else know how I fixed it. I had the full URL in the load
request and apparently some Flash players don't like this. I put a
link to the file without the domain name and everybody is working
fine. The load function, Flash, or something could not resolve the
domian correctly and could not find the XML file. I was not getting
a request for the file from the Flash movie so I knew it had to be
soemthing in Flash.

Xpath expression is empty for input XML file - Help!!!

Hi,
I am desperate by now!!! :-(
I am not able to read an XML file using the File Adapter
when trying to assign the input I get the following error:
06/06/08 09:15:10 at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.evalFromValue(BPELAssignWMP.java:490)
06/06/08 09:15:10 at com.collaxa.cube.engine.ext.wmp.BPELAssignWMP.__executeStatements(BPELAssignWMP.java:122)
06/06/08 09:15:10 at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:188)
06/06/08 09:15:10 at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3408)
06/06/08 09:15:10 at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1836)
06/06/08 09:15:10 at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
06/06/08 09:15:10 at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:166)
06/06/08 09:15:10 at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:252)
06/06/08 09:15:10 at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5438)
06/06/08 09:15:10 at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1217)
06/06/08 09:15:10 at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:511)
06/06/08 09:15:10 at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:335)
06/06/08 09:15:10 at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796)
06/06/08 09:15:10 at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
06/06/08 09:15:10 at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:125)
06/06/08 09:15:10 at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
06/06/08 09:15:10 at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
06/06/08 09:15:10 at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
06/06/08 09:15:10 at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:755)
06/06/08 09:15:10 at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:928)
06/06/08 09:15:10 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
06/06/08 09:15:10 at java.lang.Thread.run(Thread.java:534)
<2006-06-08 09:15:10,384> <ERROR> <default.collaxa.cube.xml> com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure}
messageType: {null}
parts: {{summary=<summary>empty variable/expression result.
[b]xpath variable/expression expression "/ns6:SUPPLIERS_ORDER_NUMBER" is empty at line 23, when attempting reading/copying it.
Please make sure the variable/expression result "/ns6:SUPPLIERS_ORDER_NUMBER" is not empty.
</summary>}}
this is my XML file:
<?xml version="1.0" encoding="utf-8"?>
<SUPPLIERS_ORDER_NUMBER>"XX"</SUPPLIERS_ORDER_NUMBER>
this is my xsd file:
<xs:schema
targetNamespace="http://schemas.oracle.com/service/bpel/common"
xmlns:common = "http://schemas.oracle.com/service/bpel/common"
xmlns:xs = "http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<xs:element name="SUPPLIERS_ORDER_NUMBER" type="xs:string"/>
</xs:schema>
Please help me
thanks
Amit

Hi,
This is my file adapter wsdl file:
<definitions
name="fileAdapter"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns="http://schemas.xmlsoap.org/wsdl/" >
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:FILEAPP="http://xmlns.oracle.com/pcbpel/adapter/file/">
<element name="InboundFileHeaderType">
<complexType>
<sequence>
<element name="fileName" type="string"/>
<element name="directory" type="string"/>
</sequence>
</complexType>
</element>
</schema>
</types>

<message name="InboundHeader_msg">
<part element="tns:InboundFileHeaderType" name="inboundHeader"/>
</message>
</definitions>
So , should I use http://xmlns.oracle.com/pcbpel/adapter/file/ as my targetNamespace?
for example:
<xs:schema targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns="http://xmlns.oracle.com/pcbpel/adapter/file/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
Thanks
Amit

Corrupted iTunes xml file. HELP!

Similar Messages

Maybe you are looking for