Cost center (KOSTL) is not updating in HR master table for infotype 0001

Hi ABAP gurus,
We have one interface where we are posting the HR master data using the IDOC (IDOC_INPUT_HRMD) into SAP.
While updating cost center, We have one issue regarding infotype 0001.
It is working fine for all the fields except: KOSTL, ORGEH, STELL.  Surprisingly the created IDOC contains the value in these fields but it is not getting updated in master table PA0001. I have tryied inserting the value manually and it is working fine and tried with BDC Programming and no issues. Only we have this issue while we want to use the IDOC. This is mandatory in our interface.
While debugging the IDOC function module I found that one condition is there for these three fields.
CHECK NOT inte IS INITIAL. where inte value is being fetched from table t77s0 based on
GRPID = PLOGI
SEMID = ORGA
In this condition I see no value for this combination and hence it is not getting further. I am not sure how this condition does exist for only these three fields and not for others.
Can any please provide the reasona and solution for this.
Appreciate the help in advance.
Thanks,
Jitender

Dear Mohan,
Try assigning your cost center to position it will default both your org unit and cost center.
Cheers!

Similar Messages

  • FV 60 document is stored in VBKPF table. I would need cost center KOSTL

    When parking FI document in transaction FV 60 document is stored in VBKPF table. I would need cost center KOSTL. this is not entered in table VBKPF.
    Where could I find KOSTL and what is connection

    BSEG

  • Work order to cost center settlement does not post to GL module (FI)

    Dear Expert,
    I find the Maintenance Work order to cost center settlement does not post to GL module (FI)?Also, the settlement cost element is primary element define in GL chart of account.
    When an maintenance order is settled with KO88 or KO8G the work order value posted cost center and  the value is display in cost center report but not post to GL module in FI.As I notice only good issue or receive to/from work order is posted in GL but not the settlement of work order.Why?
    Between, Kindly advise what are the report or T-code to view the maintenance order is done the settlement and what are the value is settle for maintenance work order?
    Kindly advice under what circumstance when maintenance work order to cost center settlement is posted to GL(FI module)?
    Please advice.
    Thank you.
    KH

    Hi Kiran,
    The error message clearly says that "Cost Center validity starts from 01.10.2014" i.e. in the future period.
    Change the cost center from period in the past date and try.
    BR, Srinivas Salpala

  • Profit Center Hierarchy is not updating in Variable

    HI Guru's,
    Profit Center Hierarchy is not updating in Variable .
    We have 3 new profit center added of which i have updated the master data ie, attr, txt, and hierarchy and Txn data. Where after updating i can find the thing updated but when i execute the report in the variable i dont find the updated profit center.
    Please guide
    Prasad

    But just to update you that we don't have data for the new profit centerin R3. Is it because of this i don't find the new profit centers in
    Variable screen ( though i can see in Query Designer)
    Please guide

  • Cost Centre Plan data not updating FAGLFLEXT

    Dear Experts,
    In our production environment, our cost centre plan is not updating FAGLFLEXT table. Profit centre plan using GP12N is fine.
    We are using the New GL and have FIN-CCA and FIN-PCA scenario activated.
    Integrated planning is ticked in the planning versions for both Controlling and New GL Plan versions.
    Controlling plan version and New GL plan version have the same name.
    In table Controlling table COSP, I can see the plan data on business transaction type RKP1.
    I expect to see it in FAGLFLEXT with RKP1 but I see no plan values at all.
    In fact, in the previous 3 environments, we have not had this problem and cost centre plan and actual has updated FAGLFLEXT. Only in Production...
    Any suggestions? Help if you can! Thanks alot,
    Deb

    Dear Ravi,
    I don't think this is the problem.
    It seems that:
    - the CC plan was created -> it updated CO tables e.g. COSP -> no update to FAGLFLEXT
    - the CC plan was deleted -> it updated CO tables with negative value -> updated FALFLEXT with negative value
    -the CC plan was update again -> it updated CO table -> updated FAGLFLEXT and balance with negative value is zero
    - the CC plan was deleted again -> it updated CO tabe with negative value -> FAGLFLEXT  is in minus value!
    It seems like somewhere between first and second steps, the scenario FIN-CCA was not behaving like it was active!
    Have you come across this before?
    Thanks!
    Debora

  • Substitution written under cost center accounting is not working for tcode MB1B but working for MIGO_GI

    Hi All
    Do you know why this behaviour different for subtitution written under cost center accounting.
    We have written substitution using coding block table. Logic of substitution is in case of any GL maintained in a set is being used for posting , then we will replace the cost center with profit center vlaue. Reason being we have same naming convention for Cost center and Profit center.
    Thanks
    Sonia

    Hi,
    MB1B is t-code for stock transfer posting.
    Stock transfer posting generate FI document using balance sheet account, not P&L account.
    Because you don’t create cost elements using balance sheet accounts related to stock, I think that Substitution written under cost center accounting is not working for tcode MB1B is right.

  • I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

    I have installed apps Hungry Shark vobec but it does not show me the settings I like it or not even in the game center I have not updated results from it you can not help me thank you

    Hi Marcel1no,
    Welcome to the Apple Support Communities! 
    I understand that it can be frustrating when an application downloaded from the App Store is not behaving as you would expect. In this situation, I would recommend using the attached article for information on troubleshooting apps downloaded from the App Store. 
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Cheers,
    Joe 

  • Cost Center Group Hierarchy not displayed in infopack selection

    Hi All,
    Suddenly my cost center hierarchy load failed with error "No Hier Selections". When i checked inside the infopackage selection, i was unable to find my cost center i was not able to see even after refreshing the r/3 hierarchy. I checked in RSA6 also but i still could not find that particular hierarchy.
    I thought the hierarchy would have changed, so i checked in R/3 and the Hierarchy is visible by transaction code KSH3.
    I want to load this hieararch to BW.. i am not able to see in infopack..
    Kindly suggest and help.
    Aravind

    Under 0Costcenter, replicate datasource 0COSTCENTER_0101_HIER...
    In the infopackage, under "Hierarchy Selection" tab, click 'Available Hierarchies from OLTP" button. Here check weather u can see that hierarchy

  • Plan Price for GR item not updating from mt. master,but taking sum of GI it

    Hello
    I am using a MTS scenario with 10 strategy. The price in the production order cost analysis view for GR item is not updating with material master price, but it is updating with a sum total price of the materials for GI in the production order. The price control for header GR item is 'S' and for all GI items it is 'V'.
    How to get the price from the material master for the GR item (order header item)?
    Thanks,
    Abhi.

    Check costing variants assigned for planned and actulas in order types ( u can see costing variants in production with CO03 in control tab).
    Check the valuation variant for which priorities given like std price, average price etc.,
    Please note that while confirming the production order the GR will happened based on the strategy given in valuation variant and it will take from material master.
    I think in your valuation variant "average price" has given higher priority and average price existed in your material master.
    System won't sum up all raw material costs and put it into GR, unless otherwise any user exit given.
    regs,
    ramesh b

  • When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630)

    When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630).can anyone please with a knowledge tell me what I should do please. Thank you

    The search bar can be very valuable...........
    In using it, I found out other's have had this issue and it likely means you have a 3G iPad?  If you do, go into settings and turn off cellular data, then try to update again and you should be OK........

  • Why Apple did not update Macbook pro retina spec for early 2014?

    Why Apple did not update Macbook pro retina spec for early 2014? I really want to buy new macbook pro retina.
    Very disappointing. I cannot wait. I will buy windows laptop because out of patient.

    Does the October 2013 model not meet your needs? What advances would you expect or see in a 2014 model?

  • JBO-28004: Could not lock row in control table for table null

    hello.
    we have deployed two application on a server.
    both have code like this:
         select = "SELECT * from tab";
    vo = e.getDBTransaction().createViewObjectFromQueryStmt(select);
                        vo.executeQuery();
                        RowSet rs = vo.getRowSet();
                        if(rs != null)
                             Row lastRow = vo.getRowSet().last();
    the last line throws sometimes an exception (.last()).
    JBO-28004: Could not lock row in control table for table null
    at oracle.jbo.PCollException.throwException(PCollException.java:34)
    at oracle.jbo.pcoll.OraclePersistManager.commit(OraclePersistManager.java:229)
    at oracle.jbo.pcoll.OraclePersistManager.dropTable(OraclePersistManager.java:499)
    at oracle.jbo.pcoll.OraclePersistManager.createTable(OraclePersistManager.java:692)
    at oracle.jbo.pcoll.OraclePersistManager.insert(OraclePersistManager.java:1492)
    at oracle.jbo.pcoll.PCollNode.passivateElem(PCollNode.java:542)
    at oracle.jbo.pcoll.PCollNode.passivate(PCollNode.java:657)
    at oracle.jbo.pcoll.PCollection.passivateLRULeafNode(PCollection.java:351)
    at oracle.jbo.pcoll.PCollection.checkActiveLeafLimit(PCollection.java:404)
    at oracle.jbo.pcoll.PCollection.nodeRecentlyUsed(PCollection.java:252)
    at oracle.jbo.pcoll.PCollNode.<init>(PCollNode.java:73)
    at oracle.jbo.pcoll.PCollNode.checkForSplit(PCollNode.java:1553)
    at oracle.jbo.pcoll.PCollNode.addObject(PCollNode.java:1622)
    at oracle.jbo.pcoll.PCollNode.addObject(PCollNode.java:1610)
    at oracle.jbo.pcoll.PCollection.addElement(PCollection.java:753)
    at oracle.jbo.server.QueryCollection.fetch(QueryCollection.java:1247)
    at oracle.jbo.server.QueryCollection.getRowCount(QueryCollection.java:1065)
    at oracle.jbo.server.ViewRowSetImpl.getRowCount(ViewRowSetImpl.java:1444)
    at oracle.jbo.server.ViewRowSetIteratorImpl.last(ViewRowSetIteratorImpl.java:1183)
    at oracle.jbo.server.ViewRowSetImpl.last(ViewRowSetImpl.java:2246)
    at oracle.jbo.server.ViewObjectImpl.last(ViewObjectImpl.java:4352)
    at com.omv.emis.extemis.bc.EmsFreigabeImpl.checkFullMonth(EmsFreigabeImpl.java:327)
    at com.omv.emis.extemis.bc.EmsFreigabeImpl.doDML(EmsFreigabeImpl.java:293)
    at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:3410)
    at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2274)
    at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2216)
    at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1511)
    at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:1677)
    at EmsFreigabeView1_BrowseEdit._jspService(_EmsFreigabeView1__BrowseEdit.java:134)
    at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
    at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:563)
    at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:309)
    at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:767)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:259)
    at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:106)
    this exception does not occur every time just sometimes.
    (no other user/application uses the specific table, so there is no other lock)
    maybe someone knows an error source.
    thx in advance.

    Gina:
    Could you run you app with diagnostic turned on?
    If you're launching your middle tier from command prompt, you should invoke java as
    java -Djbo.debugoutput=console ...
    If you're launching your middle tier from w/i JDev..
    1. Select the project.
    2. Do right mouse click and select "Project Settings..."
    3. On the Settings dialog, select Configurations/Runner.
    4. In the righthand side pane, you should see a textbox for "Java
    Options". Please add the following JVM switch:
    -Djbo.debugoutput=console
    Then, rerun. The run command should include
    -Djbo.debugoutput=console as in
    "D:\JDev9i\jdk\bin\javaw.exe" -Djbo.debugoutput=console -classpath ...
    Then, you should see a lot of diagnostic messages. It will also give you complete stack trace including that of the detail exception.
    When you get the exception diagnostic output, please post that to this thread.
    Thanks.
    Sung

  • Material Issue to cost center which are not allocated to ML

    Dear Experts,
    We have a senario, Material issue to the cost center and through activity type the cost updated in production order, Client wants when reu  CKMLCP the same should  be updated in ML, and also revaluate actual activity price and updated in cost center.
    Please help to solve the issue.
    Thank you

    Hi Nuki
    I hope this material is not price control = 3/S (standard) and also the cost center is not productive type.
    If you consume material with standard price to production cost center it will start a looping in activity calculation and at month end there will balance in this cost center.
    Well I hope I helped you.
    Regards

  • MB1A and Cost Center (KOSTL) based on Order (AUFNR)

    Hello,
    I have a requirement, where i must make a modification in transaction MB1A in the following way:
    On the second screen "Enter Goods Issue: New items" i must fill automatically the Cost Center field, based on the Order number (after the Enter).
    How can I do this?
    I've tried with a substitution in GGB1 but it didn't worked:
    select single kostv from coas into cobl-kostl where aufnr = cobl-aufnr.
    Thanks in advance !
    Tohi

    HI
    Can you check the below exits
    Transaction Code - MB1A                     Goods Withdrawal
    Enhancement/ Business Add-in            Description
    Enhancement
    MBCF0002                                Customer function exit: Segment text in material doc. item
    MBCF0005                                Material document item for goods receipt/issue slip
    MBCF0006                                Customer function for WBS element
    MBCF0007                                Customer function exit: Updating a reservation
    MBCF0009                                Filling the storage location field
    MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011                                Read from RESB and RKPF for print list in  MB26
    MB_CF001                                Customer Function Exit in the Case of Updating a Mat. Doc.
    BADI
    MB_MIGO_BADI                            BAdI in MIGO for External Detail Subscreens
    MB_MIGO_ITEM_BADI                       BAdI in MIGO for Changing Item Data
    MB_PHYSINV_INTERNAL                     Connection: Core Inventory and Retail AddOn
    MB_QUAN_CHECK_BADI                      BAdI: Item Data at Time of Quantity Check
    MB_RESERVATION_BADI                     MB21/MB22: Check and Complete Dialog Data
    MB_RESERVATION_SCR                      Screen BAdI for Retrofit DFPS
    MB_RESERVATION_UPCHD                    BAdI for Creation and Changing of Manual Reservations
    MB_RES_BAPI_CHANGE                      BAdI: Execution of Changes to Reservation Fields
    MB_RES_BAPI_CREATE1                     BAdI: Adoption of Customer's Own Fields as Reserv. Fields
    MB_RES_BAPI_DETAIL1                     BAdI: Display of Customer's Own Fields in Reservations
    MB_STOR_LOC_BADI_GTS                    BADI to Check and Change Storage Location (GTS Fct. Only)

  • Want to check whether cost center exists or not during payroll process ?

    Dear All,
    Requirement is to throw an error for an employee during payroll run if the cost center does not exist.
    I guess this may be achieved by PCR only.  There is an operation OUTWPCOSTC which can help.
    Issue is that there are parameters like VALEN and VAOFF which need to be taken care of while using OUTWPCOSTC.
    Also, when cost center is not assigned, its value in WPBP is BLANK.  How to query a BLANK value in PCRs?
    Can any help on this with an complete example?
    Regards,
    Ankit

    Hi Ankit,
    Try with PCR
    VALEN 1
    OUTWPCOSTC
    Update the PCR in sub schema COPY  Z002                  Edit basic data
    000040 WPBP                        Read Work Center/Basic Pay Data
    000050 GON                         Continue if Data is Complete
    000060 ACTIO ZQ14 GEN              Check if cost centre exits
    000070 BLOCK END                   Edit basic data
    This will help you while runing the Payroll.
    Thanks & Regards
    Vikram Mali

Maybe you are looking for