Could not create a Job with BI Scheduler

Hi all, we are attempting to create a job but when it runs we receive the following error:
+++ ThreadID: 564 : 2007-06-11 10:10:08.000
Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: Authentication failed.
Error Codes: WKY9UVRD:
Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004)
+++ ThreadID: 564 : 2007-06-11 10:10:08.000
...Trying main loop again.
+++ ThreadID: 564 : 2007-06-11 10:10:08.000
... Sleeping for 9 seconds.
+++ ThreadID: 564 : 2007-06-11 10:10:17.000
Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: Authentication failed.
Error Codes: WKY9UVRD:
Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004)
+++ ThreadID: 564 : 2007-06-11 10:10:17.000
Terminal Error: Exceeded number of retries.
+++ ThreadID: 564 : 2007-06-11 10:10:08.000
Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: Authentication failed.
Error Codes: WKY9UVRD:
Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004)
+++ ThreadID: 564 : 2007-06-11 10:10:08.000
...Trying main loop again.
+++ ThreadID: 564 : 2007-06-11 10:10:08.000
... Sleeping for 9 seconds.
+++ ThreadID: 564 : 2007-06-11 10:10:17.000
Global Error: [nQSError: 77006] Oracle BI Presentation Server Error: Authentication failed.
Error Codes: WKY9UVRD:
Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004)
+++ ThreadID: 564 : 2007-06-11 10:10:17.000
Terminal Error: Exceeded number of retries.
Any help?
Thank you.,
Regards.

I have the same Problem :-(
In adittion I have an authentivication with LDAP.
If I create the user in the Repository I can connect to it but I receive the following Problem:
+++ ThreadID: 82c : 2007-10-10 12:17:40.000
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLDriverConnectW).
Error Codes: OPR4ONWY:U9IM8TAC
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 13024] Successful completion of init block 'IB_LDAP' is required. (08004)
If drop the User the Repository and use an LDAP User, I receive the following:
+++ ThreadID: 38c : 2007-10-10 13:13:21.000
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43001] Authentication failed for ExtOV01 in repository Star: invalid user/password. (08004)
Regards,
Stefan Hess

Similar Messages

  • IP/TV "Could not create RTSP connection with Program manager"

    Hello,
    When we try to view IP/TV content with the IP/TV viewer we are able to but when we try to view it through a webpage I recieve the error:
    "Could not create RTSP connection with Program manager"
    I have no idea what the problem is. Anyone have any input?
    Please see the attached image.

    The client, program manager and ip tvserver are all on the same local area network
    This URL should help you:
    http://www.cisco.com/en/US/customer/products/hw/contnetw/ps1863/index.html

  • Could not create pool connection with MySql

    When starting weblogic server I obtain the following error message when the conection
    pool for a MySql database should be established. What's the mistake I am doing? #The
    examples in the weblogic.properties put a "server=DEMO to the props. What is this
    server related to the MySql RDBMS? Is it mandatory? After the error message produced
    by Weblogic you'll find some information about the MySql setup (my.ini) I have made.
    Mi Mai 01 01:33:50 CEST 2002:<I> <WebLogicServer> Invoking main-style startup weblogic.jdbc.common.internal.JdbcStartup
    weblogic.jdbc.common.internal.JdbcStartup
    Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Creating connection pool ejbTestPool
    with:
    {aclName=weblogic.jdbc.connectionPool.ejbTestPool, maxCapacity=2, initialCapacity=1,
    url=jdbc:mysql://Blizzard:3306/ejbTest, props=user=du-it;password=du-it;server=3.23.4
    9-nt, capacityIncrement=1, driver=org.gjt.mm.mysql.Driver, poolName=ejbTestPool}
    Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Sleeping in createResource()
    Mi Mai 01 01:33:51 CEST 2002:<E> <JDBC Pool> Failed to create connection pool "ejbTes
    tPool"
    weblogic.common.ResourceException: weblogic.common.ResourceException:
    Could not create pool connection. The DBMS driver exception was:
    java.sql.SQLException: Invalid authorization specification: Access denied for user:
    du-it@blizzard' (Using password: YES)
    at org.gjt.mm.mysql.MysqlIO.init(MysqlIO.java:278)
    at org.gjt.mm.mysql.Connection.<init>(Connection.java:230)
    at org.gjt.mm.mysql.Driver.connect(Driver.java:126)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
    onEnvFactory.java:146)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
    onEnvFactory.java:108)
    at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
    .java:771)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
    16)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
    30)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
    onEnvFactory.java:154)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
    onEnvFactory.java:108)
    at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
    .java:771)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
    16)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
    30)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
    onEnvFactory.java:124)
    at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
    .java:771)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
    16)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
    30)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
    MySql:
    #This File was made using the WinMySQLAdmin 1.4 Tool
    #29.04.2002 14:46:57
    #Uncomment or Add only the keys that you know how works.
    #Read the MySQL Manual for instructions
    [mysqld]
    basedir=D:/db/mysql
    #bind-address=169.254.102.136
    datadir=D:/db/mysql/data
    #anguage=D:/db/mysql/share/german
    #slow query log#=
    #tmpdir#=
    port=3306
    #set-variable=key_buffer=16M
    [WinMySQLadmin]
    Server=D:/db/mysql/bin/mysqld-nt.exe
    user=du-it
    password=du-it

    When starting weblogic server I obtain the following error message when the conection
    pool for a MySql database should be established. What's the mistake I am doing? #The
    examples in the weblogic.properties put a "server=DEMO to the props. What is this
    server related to the MySql RDBMS? Is it mandatory? After the error message produced
    by Weblogic you'll find some information about the MySql setup (my.ini) I have made.
    Mi Mai 01 01:33:50 CEST 2002:<I> <WebLogicServer> Invoking main-style startup weblogic.jdbc.common.internal.JdbcStartup
    weblogic.jdbc.common.internal.JdbcStartup
    Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Creating connection pool ejbTestPool
    with:
    {aclName=weblogic.jdbc.connectionPool.ejbTestPool, maxCapacity=2, initialCapacity=1,
    url=jdbc:mysql://Blizzard:3306/ejbTest, props=user=du-it;password=du-it;server=3.23.4
    9-nt, capacityIncrement=1, driver=org.gjt.mm.mysql.Driver, poolName=ejbTestPool}
    Mi Mai 01 01:33:50 CEST 2002:<I> <JDBC Pool> Sleeping in createResource()
    Mi Mai 01 01:33:51 CEST 2002:<E> <JDBC Pool> Failed to create connection pool "ejbTes
    tPool"
    weblogic.common.ResourceException: weblogic.common.ResourceException:
    Could not create pool connection. The DBMS driver exception was:
    java.sql.SQLException: Invalid authorization specification: Access denied for user:
    du-it@blizzard' (Using password: YES)
    at org.gjt.mm.mysql.MysqlIO.init(MysqlIO.java:278)
    at org.gjt.mm.mysql.Connection.<init>(Connection.java:230)
    at org.gjt.mm.mysql.Driver.connect(Driver.java:126)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
    onEnvFactory.java:146)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
    onEnvFactory.java:108)
    at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
    .java:771)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
    16)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
    30)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connecti
    onEnvFactory.java:154)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
    onEnvFactory.java:108)
    at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
    .java:771)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
    16)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
    30)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
    at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connecti
    onEnvFactory.java:124)
    at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator
    .java:771)
    at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java:4
    16)
    at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:3
    30)
    at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java:117)
    at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
    at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
    at java.lang.reflect.Method.invoke(Native Method)
    at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
    at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java:109)
    at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
    MySql:
    #This File was made using the WinMySQLAdmin 1.4 Tool
    #29.04.2002 14:46:57
    #Uncomment or Add only the keys that you know how works.
    #Read the MySQL Manual for instructions
    [mysqld]
    basedir=D:/db/mysql
    #bind-address=169.254.102.136
    datadir=D:/db/mysql/data
    #anguage=D:/db/mysql/share/german
    #slow query log#=
    #tmpdir#=
    port=3306
    #set-variable=key_buffer=16M
    [WinMySQLadmin]
    Server=D:/db/mysql/bin/mysqld-nt.exe
    user=du-it
    password=du-it

  • Creating Oracle Job with Task Scheduler

    Hi,
    Platform: Oracle10g R2, Windows 2003 Server
    I have the below script on my Linux server that backups up the database. It's run via crontab.
    --------------- script ---------------------
    -- Environment variables goes here
    cd $ORACLE_HOME/bin
    ./rman target / <<EOF
    startup mount;
    backup database plus archivelog delete input;
    delete noprompt obsolete;
    alter database open;
    I want something similar I can do on windows like .bat file that I can schedule to run via Task Scheduler.
    Any help please?
    Thnaks and regards,
    Creems

    Hi AG,
    I tried to do that but it's not working.
    But I did something similar for auto-delete of flashback logs and it works but the backup thing aint working.
    What can I do?
    Here is what I did for the auto-flashback delete
    =======
    RunSQL.bat
    =======
    -- content of RunSQL.bat
    @ECHO OFF
    TITLE Resetting Flashback Logs
    CLS
    ECHO Please be patient. This will take some time.
    ECHO.
    ECHO.
    SET ORACLE_SID=PROD
    sqlplus.exe /nolog @del_flashback.sql
    ECHO.
    ECHO.
    ECHO FLASHBACKs reset. Please continue with your other procedures.
    ECHO.
    ==========
    del_flashback.sql
    ==========
    -- content of del_flashback.sql
    connect /nolog
    conn sys/oracle as sysdba
    SHOW USER
    shutdown immediate
    startup mount
    alter database flashback off;
    alter database flashback on;
    alter database open;
    SHOW USER
    exit
    This works, but when I did the same with RMAN backup it doesn't.
    Any more help please?
    Thanks and regards,
    Creems

  • " Could not create SSL/TLS secure channel " error with Webtest of VS 2013

    hello !
    I want to test my mvc web project with webtest tools of VS 2013 and I Record a test with Internet Explorer
    but when I run test appear this error for me at result of test run : Could not create SSL/TLS secure channel
    for some requested url , but i watch requests in developer tools of chrome browser and I don't see this error.
    i have ssl certificate on the server.
    thanks 

    Hi ArashGhf,
    >>but when I run test appear this error for me at result of test run : Could not create SSL/TLS secure channel
    Based on the error message, it looks like it might be a problem with your certificate not being set up correctly for web performance test.
    Therefore, I suggest you could refer the autom8dTest's suggestion to convert the Web performance test to coded web performance test and then add the WebTestRequest ClientCertificates property to the ClientCertificates collection after the request
    is set up.
    For more information, please refer to it.
    https://social.msdn.microsoft.com/Forums/en-US/49e8d188-90c3-4d72-b387-10b1d1adc4a0/ssl-in-webtests-request-failed?forum=vstswebtest
    Hope it help you!
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • "Could not create renderer with alias..." after deploying ResourceRenderer

    Hello everybody
    I've developed a custom ResourceRenderer class that looks like this:
    package no.expert.portal.km.relateddocs;
    import com.sapportals.htmlb.Component;
    import com.sapportals.htmlb.Link;
    import com.sapportals.wcm.WcmException;
    import com.sapportals.wcm.rendering.resource.cm.ResourceRenderer;
    import com.sapportals.wcm.repository.IResource;
    public class RelatedDocsNamePropertyRenderer extends ResourceRenderer
         protected Component renderContentLink(com.sapportals.htmlb.Component comp) throws WcmException
              Link result = (Link) super.renderContentLink(comp);
              result.setTarget("");
              return result;
         protected Component renderContentLink(IResource resource, com.sapportals.htmlb.Component comp) throws WcmException
              Link result = (Link)super.renderContentLink(resource, comp);
              result.setTarget("");
              return result;
    All it does, really, is preventing links to documents in KM to open in a new window. At least that's what I'm hoping it will do, as it's based on ideas in <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=20316">this post</a>.
    I've added all the necessary .jar files, and implemented a wrapper portal service as described here: <a href="http://media.sdn.sap.com/html/submitted_docs/nw_kmc/ide/projects/Setting%20Up%20a%20KMC%20Project.html">http://media.sdn.sap.com/html/submitted_docs/nw_kmc/ide/projects/Setting%20Up%20a%20KMC%20Project.html</a>.
    I've created an alias for the class in <i>Content Management -> User Interface -> Mapping</i>, and assigned this to the resource renderer settings that I use.
    OK, here is where the trouble starts. When viewing the layout set with debugging on, I check <i>Rendering Information</i>. It informs me that <i>"The given configuration was not used, because the alias is not defined or points to an invalid java class"</i>. Looking in the log, this is the error message:
    Could not create renderer with alias ZRelatedDocsNameResourceRender and classname no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer:java.lang.NoClassDefFoundError: com/sapportals/wcm/rendering/resource/cm/ResourceRenderer
    ------------------------- Loader Info -------------------------
    ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@6b247b]
    Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@4e82c4]
    References:
       not registered!
    Resources:
       C:usrsapEPUJC00j2eeclusterserver0appssap.comirjservlet_jspirjrootWEB-INFportalportalappsno.expert.portal.km.relateddocs.RelatedDocsNamePropertyRendererprivatelibno.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderercore.jar
    The error occurred while trying to load "no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer".
         at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
    I have a suspicion this might have something to do with the SharingRefernce in portalapp.xml, but after experimenting with different values, I'm no nearer a solution. Any ideas, anyone? Any help greatly appreciated.
    -martin
    Yes, and here is my portalapp.xml:
    <?xml version="1.0" encoding="utf-8"?>
    <application>
      <application-config>
        <property name="SharingReference" value="com.sap.netweaver.bc.crt,knowledgemanagement"/>
        <property name="PrivateSharingReference" value="com.sap.km.cm.ui.flex"/>
      </application-config>
      <components>
        <component name="RelatedDocsNamePropertyRenderer">
          <component-config>
            <property name="ClassName" value="no.expert.portal.km.relateddocs.RelatedDocsNamePropertyRenderer"/>
          </component-config>
          <component-profile/>
        </component>
      </components>
      <services>
        <service name="BootStrapNamePropertyRender">
          <service-config>
            <property name="className" value="no.expert.portal.km.relateddocs.BootStrapNamePropertyRender"/>
            <property name="startup" value="true"/>
          </service-config>
        </service>
      </services>
    </application>

    Hi Gourab,
    Double check the the page.xml has referring to the correct CO. Open the page.xml and see which controller is attached to it.
    Also attach the extended controller through personalization to the page/Region.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • What's wrong with this MySQL connection? "Could not create connection to database server"

    I'm able to connect to other MySQL databases but this one particular remote MySQL connection isn't working and I cannot figure it out.  It probably has something to do with the remote server, not CF, but I thought I'd post it here if anyone had an idea.  The MySQL account has full priviledges.
    Here is the message when I try to validate the data source:
    Connection verification failed for data source: test
    com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException:  Could not create connection to database server. Attempted reconnect 3  times. Giving up.
    The root cause was that:  com.mysql.jdbc.exceptions.jdbc4.MySQLNonTransientConnectionException:  Could not create connection to database server. Attempted reconnect 3  times. Giving up.

    This happened on two servers.  One one, the cause was that skip-networking was turned on.  In the other situation, it appears that the database name was case sensitive, so TEST was not the same as test.  Even though I edited the data source in the CF administrator, it still didn't work (very misleading).  When a coworker entered a new data source with the same information (uppercase database name this time from the start), it worked.
    Has anyone else seen this problem with the case sensitive database names?  And with the data source in CF not updating the case correctly?  Seems like a bug in CF.

  • Could not create Java class: associated with region:

    Hi All,
    I am extending the standard controller oracle.apps.pos.supplier.webui.SuppSummCO
    With a custom controller xxmycomp.oracle.apps.pos.supplier.webui.XXSuppSummCO
    I have built the project in my local JDEV,
    Compiled the custom controller and put it under $JAVA_TOP
    I have verified the same by ls -l $JAVA_TOP/xxmycomp/oracle/apps/pos/supplier/webui/XXSuppSummCO.class
    I have given full permission to xxmycomp folder under $JAVA_TOP (chmod -R 777 xxmycomp)
    I have done the OC4J core bounce
    After setting the custom controller at site level by personalizing the Region,
    When I am returning to the application I am getting the following error
    oracle.apps.fnd.framework.OAException: Could not create Java class: (xxmycomp.oracle.apps.pos.supplier.webui.XXSuppSummCO) associated with region: (PageLayoutRN). This is probably because the class name is wrong or not included in project.
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
         at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2559)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1894)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:538)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:426)
         at OA.jspService(_OA.java:212)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
         at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
         at RF.jspService(_RF.java:225)
    The custom controller is for testing only and has only the following code
    public void processRequest(OAPageContext oapagecontext,
    OAWebBean oawebbean)
    super.processRequest(oapagecontext, oawebbean);
    public void processFormRequest(OAPageContext oapagecontext,
    OAWebBean oawebbean)
    super.processFormRequest(oapagecontext, oawebbean);
    I have created the directory xxmycomp under $JAVA_TOP
    I have read only access to other directories under $JAVA_TOP apart from xxmycomp.
    Can anybody help me resolve this error?
    I am doing the same steps in another instance where it is working fine.
    Regards,
    Gourab

    Hi Gourab,
    Double check the the page.xml has referring to the correct CO. Open the page.xml and see which controller is attached to it.
    Also attach the extended controller through personalization to the page/Region.
    Thanks
    --Anil                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can't continue: unexpected failure during app

    I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can’t continue: unexpected failure during application startup  I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

    I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
    I'm baffled....
    Ben

  • Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

    Hello,
    Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
    Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana.  zip folder: "sap_hana_win32_studio_rev80"
    Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
    Actions taken:
    Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
    Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
    Checked OSS (ie Note 1859686 - HANA Studio does not start)
    Description of installation error:
    Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine".  I've verified that there is nearly 3G of memory free.  What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini".  I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
    Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
    If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution.  Thanks very much.
    FYI: the HANA Client installed with no issues.
    Jim Cleek
    FYI: the images below reflect the sequence of images produced during the installation.
    after clicking OK above, the screen below gets updated (see the "is not empty" msg).
    Below is the eclipse.ini file located in the deployed/target folder:
    Message was edited by: Jim Cleek
    FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder.  The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

    Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario.  They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package.  One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
    Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory.  The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
    FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
    SAPCAR 7.20 -> Windows on x64 64bit:  SAPCAR_315-20010453.EXE
    IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
    Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
    IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
    Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
    jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
    Jim Cleek
    HP Enterprise Services

  • T code to find sales orders/Deliveries for which batch job could not create

    Hi
    Once a PGI has been created for a sales order, the invoice should be created in nightly batch. Once is a while, something is wrong and SAP cannot create the invoice. I know there is a transaction that will list the orders / deliveries where SAP could not create the invoice. Can you tell me what that t-code is? Thanks

    Lakshmipathy
    I think you did not get my point corectly , I know , billing docs due list , what I  need was after batch job running , for some deliveries , due to some reason , billing docs might not have created .
    Business needs to know only thsese delivery docs in a T code or table but not all the due document . I did not find answer for this question in SDN .
    I got the answer now  for this question , it is V.21 .
    Thanks for your time .

  • Why do I get the message "CoCreateInstance failed - Could not create 3D mouse device" with Acrobat9?

    Had a crash and reinstalled everything.  All is OK, except when I open Acrobat 9, I get the message "CoCreateInstance failed - Could not create 3D mouse device".  Tried unchecking anything in Acrobat preferences having to do with 3D, and I don't currently have a 3D mouse device installed.  Can't find any other reference in Google that includes both Acrobat and the contents of the message, part or all.  Ran "repair acrobat installation" and rebooted, and that didn't help.  Totally stumped!

    use the cs cleaner.
    first uninstall your cs5 programs (including acrobat) and uninstall adobe reader.
    run the cleaner for reader:  http://labs.adobe.com/downloads/acrobatcleaner.html
    restart your computer.
    then run the cs cleaner (http://www.adobe.com/support/contact/cscleanertool.html)
    restart your computer
    and finally reinstall your cs5 programs including acrobat (but not reader).

  • Error with test operation 'Could not create the view'

    I'm totally new to Flash Builder. I was trucking along developing my first project as a mapping app in FB 4.5 trial version with the ESRI Flex API library. I was testing how to set up WMS and WFS services, and all was going swimmingly until suddenly 'test operations' stopped working. Now when I attempt to test any service, I receive the error "Could not create the view: 1". This error stopped working shortly after I deleted a couple of testing services I had configured, but not immediately after (three or four test worked afterwards before it broke).
    I have found almost no information online about this error, but what I have found seems to always reference eclipse. I tried starting a new project, creating a new workspace and uninstalling/reinstalling Flash Builder but the error persists.
    Has anyone else ever experienced this error? Any leads at all are appreciated.
    Thanks

    For anyone else with this problem, it seems to have been an eclipse issue in the workspace. I deleted the 'cascaded' folder and the error went away.

  • Problem with Language Import (could not create cofile)

    Hi everybody
    I'm trying to load the language pack "Spanish", but falls and gives me the following message
    "could not create cofile"
    Somebody could give me some indication on how to overcome this mistake, I've seen out there and some queries, but I have not overcome my problem!
    I have created the "Transport System" and charged the language in "DEV Server," but I can not bring it to "test" if the attempt to import "TCode SMLT" gives me the error above.
    thanks

    this is action log!     
    @5B\QInformation@     Start import (state:initial)
    @5B\QInformation@     ... system date: 23.08.2008 system time: 16:38:07
    @5B\QInformation@     Version: 700.F.15
    @5B\QInformation@     Step INIT ...
    @5B\QInformation@     ... system date: 23.08.2008 system time: 16:38:07
    @5B\QInformation@     ... configuration "Selective Language Import"
    @5B\QInformation@     ... executed successfully
    @5B\QInformation@     Step DISASSEMBLE ...
    @5B\QInformation@     ... system date: 23.08.2008 system time: 16:38:07
    @5B\QInformation@     ... do not overwrite data files and cofiles (settings)
    @5C\QError@     Could not create cofile
    @5B\QInformation@     Restart import (state:lc_disassemble)
    @5B\QInformation@     ... system date: 23.08.2008 system time: 16:46:21
    @5B\QInformation@     Step DISASSEMBLE ...
    @5B\QInformation@     ... system date: 23.08.2008 system time: 16:46:21
    @5B\QInformation@     ... do not overwrite data files and cofiles (settings)
    @5C\QError@     Could not create cofile
    @5B\QInformation@     Restart import (state:lc_disassemble)
    @5B\QInformation@     ... system date: 23.08.2008 system time: 17:05:01
    @5B\QInformation@     Step DISASSEMBLE ...
    @5B\QInformation@     ... system date: 23.08.2008 system time: 17:05:01
    @5B\QInformation@     ... do not overwrite data files and cofiles (settings)
    @5C\QError@     Could not create cofile
    Test in STMS
    RFC connections Ok
    Connection Test   Ok
    Transport Tool      Ok
    Transport Directory Ok
    Check Transport Directory                                 24.08.2008  18:49:28
           ECP System ECP
               Transport Directory
                   bin        
    mts-sap\sapmnt\trans\bin
                   buffer     
    mts-sap\sapmnt\trans\buffer
                   cofiles    
    mts-sap\sapmnt\trans\cofiles
                   data       
    mts-sap\sapmnt\trans\data
                   log        
    mts-sap\sapmnt\trans\log
                   sapnames   
    mts-sap\sapmnt\trans\sapnames
                   tmp        
    mts-sap\sapmnt\trans\tmp

  • Error 25109 : The install program could not create the config data store. Is this a know issue with a solution?

    Hi I cant install the Management Console.
    I keep getting
    Error 25109 : The installation program could not create the configuration data store. Please see the installation log for more info.
    Has someone come across this problem before?
    I am using
    MS Server 2008 Std x86
    SQL Server 2005 SP2 Std x86
    MDOP 2008 R2
    APP-V 4.5
    Please can someone help.
    Thanks

    I'm running into the same problem myself, I have an almost identical setup.
    Trying to do a clean install of App-V Management Server 4.5 from the MDOP 2008 R2 CD.
    Server OS: Windows Server 2008 Enterprise SP1 (Has WDS and IIS installed (IIS 6 Management Compatibility too), as well as .Net 3.5 SP1 Framework)
    Database: Microsoft SQL Server 2005 Enterprise (Version 9.00.3068.00) (Note: SQL server is running on a different server than the server App-V is being installed on.)
    Installer gets to the point where it starts creating the database than dies, reporting a 25109 error.
    Checked out the logfile the installer created, here's a snip of the last few lines before is starts rolling back the install:
    1
    [2008-12-23 15:58:35] (2284:3084) SQL state: ``01000'', Native: 0, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]<<< CREATED TRIGGER dbo.TR_U_SYSTEM_OPTIONS >>>''. 
    2
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``42000'', Native: 18058, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]Failed to load format string for error 16873, language id 1033.  Operating system error: 122(The data area passed to a system call is too small.). Check that sqlevn70.rll is installed in C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\Resources\1033, where 1033 is the language ID of US English, or the appropriate folder for the locale in use. Also check memory usage.''. 
    3
    [2008-12-23 15:58:36] (2284:3084) SQL state: ``01000'', Native: 3621, Text: ``[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated.''. 
    4
    [2008-12-23 15:58:36] (2284:3084) ::SQLExecDirectW error 0xffffffff. 
    5
    [2008-12-23 15:58:36] (2284:3084) Failed to execute SQL ``/* ------------------------------------------------------------------------- *\ 
    6
        Copyright (c) Microsoft Corporation.  All rights reserved. 
    7
    8
        Description: 
    9
            This script creates all user-defined messages. 
    10
    11
            The types of messages allowed (and their severities) are: 
    12
            FATAL   - SQL Server Severity = 17; ours = 1 
    13
            ERROR   - SQL Server Severity = 16; ours = 2 
    14
            WARNING - SQL Server Severity = N/A; ours = 3 
    Can anyone help me shed some light on what's going on here?

Maybe you are looking for