Could not forward to JCA adapter : putting .jpg image failed : receiver communication channel

hello all,
i have a FTP to SFTP scenario for posting photos from my FTP server to other SFTP server
its successfully posting an .xml to the SFTP server but not able to post the .jpg image
attached is my audit log for my adapter
regards,
sushant

Hi Sushant
May be you are using a name for the image which is much longer than the name length expected by SFTP adapter.
Use a shorter name and send the file, see if that works or not.Remove the * from the file name.
Also check this
Scenario ABAPProxyToSFTP Outbound

Similar Messages

Not able to see 'Adapter specific' indicator in http receiver comm. channel

I am not seeing the Adapter Specific Message attributes indicator in http receiver adapter where one can set a dynamic URL. Anybody any idea? Thanks.

I have a fixed URL except that it should be formed with https instead of http. I guess the default http is used as there is no where in the communication channel to select https. I am able to invoke the https url through browser but through http receiver adapter, I get error 'http client code 110 reason'. I see in other blogs that this is due to https not enabled in the J2EE engine. But for outbound why should that matter? As long as the target URL is set to accept https, I should be able to sent the message as long as the URL gets formulated starting with https. If it was SOAP adapter, the entire URL can be entered so no issue, but with http adapter is there a way to specify entire URL including the https:// ? Thanks.

Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block fail

Hello OTN,
After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
Here is the complete error message:
Start - /OVS/running_pool/dirkwin
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
Searching for this error turned up different solutions but none of them worked.
One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
Any idea to this error or how to solve it ?
Thanks
-Stephan

Hello Sebastian,
This is one of the vm.cfg which will abort due to the above mentioned error:
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '2048'
name = 'vmname'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
vcpus = 1
vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xx'
vncunused = 1
The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
Thanks for your help !
-Stephan
ps:mac address + pw is commented out
Edited by: Stephan Becker on Aug 5, 2010 7:11 AM

I keep trying to update my iphone and i get a message saying iTunes could not restore my iPhone because the backup system failed

'm trying to sync/update my iPhone on my windows computer in iTunes and I keep getting and error message saying iTunes could not restore the iPhone because the backup session failed.

Disable your firewall/security software.
This is asked and answered everyday. Using the forum search bar on the right side of this page often will find an answer very quickly.

Could not find the main class. Program will fail

Hi I have just downloaded jdeveloper latest 10.2.1 full production version and unzipped and installed.
When i launch jdevw.exe it comes up with a pop up error saying "Could not find the main class. Program will fail"
clickin ok launches jdeeloper.. i developed a sinple jsp file and try to run it, now it says that fatal error in messages.
Help please..
Ram

Now a new error.
Internal compilation error, terminated with a fatal exception
I changed installation from c:\program files to c:\ drive .. i got rid of the pop up error !!
but when I create a simple jsp file, in a new workspace/project.. and run it.. it doesnot launch OC4J..
In the messages pallette it says
Internal compilation error, terminated with a fatal exception
in the jdev console..
java.lang.NullPointerException
at oracle.jdeveloper.model.JProjectConfiguration.getJdkClassPath(JProjec
tConfiguration.java:484)
at oracle.jdeveloper.model.JProject.getClassPath(JProject.java:743)
at oracle.jdevimpl.webapp.jsp.JspQuickCompiler.translate(JspQuickCompile
r.java:225)
at oracle.jdevimpl.webapp.model.content.DocumentInfoManager$DocumentInfo
Impl$BackgroundErrorCheckingTimerTask.run(DocumentInfoManager.java:919)
at java.util.TimerThread.mainLoop(Timer.java:432)
at java.util.TimerThread.run(Timer.java:382)
Wht the hell is goin on folks.. is this tool that bad.. .. I just downloaded and trying to evaluate it for my company ..!!

Itunes could not restore the iphone because the backup session failed

Hello,
i did a backup for my data on itunes, then i upgraded to IOS 6.1, when i tried to restore my backup it keeps giving me this message:
"itunes could not restore the iphone because the backup session failed".
although i still have the data in the backup folder, i searched the internet for softwares that can recover my data, i found a software called "Wondershare Dr.Fone"
i was able to recover all my data via Wondershare Dr.Fone, but it didnt restore the data to my iPhone, it only recovered it to my pc, as (media files, contacts,etc...)
i was wondering if there is any way to fix this problem, or any other way to restore my backup to my iPhone device without using Itunes...
one more thing , can i upload the backup files that i have on my pc to iCloud, then recover it from my iPhone??
please help i really need all my data to be back on my iPhone, media,messages,contacts,notes, even whatsapp messages.
Thank you

Hi revolc,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Cheers,
- Judy

AS2 adapter not visible in Receiver Communication Channel (Adapter Type)

Hi,
We wish to connect to our customer using AS2 adapter as the receiver communication channel.
We are unable to find the "AS2 adapter type in the in "adapter type" field. (Choose Adapter Metadata).
Our XI version is as following (NW04S_11_REL Service Pack 11).
Version
Service pack:
11
Release:
NW04S_11_REL
Is there add-on to be installed on XI or is there any activation required?
Thanks in Advance,
Rehan

SAP_BASIS
Release 700
Level 0011
Highest Support Package: SAPKB70011

Error messages: "itunesobjspl/jenetsvc.dll The specified module could not be found." And Error -2032 "Quicktime failed to initialize."

I initially got the Error -2032 message after downloading the newest version of itunes. I read a geek blog that said to uninstall Quicktime and I did that a bunch of times. I also uninstalled and reinstalled itunes repeatedly. None of this works. I noticed that the apple website said the requirements for the new quicktime/itunes download included an intel processor and I have a celeron processor, so I wondered if that was the problem, although everything has been running fine up until now, so I don't know. It also doesn't address the missing .dll file, but I may have accidentally deleted that because I went into the registry to try and unload some Quicktime files when I uninstalled Quicktime. I did this at the suggestion of the blog, but I may have screwed it up. Now I need to repair the missing .dll and still try to get itunes running

ErikEJ wrote:
Have you set your solution target to "Any CPU" ?? If so, set to "x86", as SQL Compact only runs in WoW mode on x64. Or use corflags.exe /32BIT+ against your project output (.exe file).
ErikEJ wrote:
Look at this blog post for a walk-through: http://erikej.blogspot.com/2008/01/x64-and-sql-compact.html
Hello everyone,
I have the same problem as mentioned above "Unable to load DLL 'elev.dll': The specified module could not be found. (Exception from HRESULT: 0x8007007E) ", when trying to load the dll file into a window application. I developed a window application in VS2005 and want to import a dll file from another program into my project and use it. But when I try to call one of the function in the dll file, I got the error message "Unable to load dll 'elev.dll". I try all options that say it works to solve this problem, but somehow it doesn't work for me. I put the "elev.dll" file in the bin folder and use P/Invoke to import the dll file into my project. Can anyone help me out with this? thanks and really appreciated!
Here is how I import the dll:
[DllImport(@"D:\elev.dll")]
//[DllImport("emap.dll", SetLastError = true)]
private static extern void EMA_Init();
and in the code, I call the function above but failed to load the dll file
EMA_Init();

"disk could not be read from or written to" Sync fails

I have several songs that not only will not sync to the ipad, but rather than just skimping the songs, the sync process stops. The only work around is to remove the offending songs from iTunes.
These include songs that I purchased through iTunes.
Two errors are generated:
First is the "disk could not be read from or written to" error, and then second dialog indicates that file could not be reade or written.
Each of the song files plays fine in iTunes and each syncs fine to iPods and iPhone.
Anyone else getting this or have any ideas about a solution.

I'm a little confused that this problem hasn't received more attention. Basically the sync feature is broken and I am unable to complete my sync of my music from iTunes. And I leave for a month trip next week and was hopeful to have it all loaded. Anyone out there got a solution?

Tried to install OS X and it says OS X could not be installed. File system or resist failed. Quit installer to restart and try again. It keeps me I a circle. How can I truly quit the install and go back to where I was. My time machine not working

i am in a loop. I can't get past this point OS X could not be installed on your computer. when I go to quit the installer I get are you sure you want to quit OS X installer? To quit, click choose startup disk to select a startup diskbfor your computer if you need to restart click restart. I don't have a start up disk and my time machine evidently isn't workig either. Does this mean I have lost everything??? Please someone help!!! I am not a tech person at all and am freaking out right now. How do I remove the download and just go back to what I had. Seriously!!!

Not sure what the iOS is.
iOS cannot run on any Mac computer, just Apple's mobile devices. You have some version of Mac OS X. To find it, please do "About this Mac" from your Apple menu and post what you find along wiuth the processor description.
Some iMacs cannot run newer versions of the Mac OX. That's why we need more info about your specific model. Now that you have the serial number, enter it into the Apple support page to get it translated into a model type:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Report what that says for your model BUT DO NOT post your serial number for security reasons.

Recently purchased iPad Mini. Could not get it to connect. Changed router's setting to Channel 6 and IPad connected. Even after 6.0.2 it will not connect to some home networks although it will to public networks e.g. McDonald's.

Recently purchased iPad Mini. Downloaded iOS 6.0.1. Could not get it to connect to Home WiFi using Linksys G Router. Have another Wifi Network in Home (CenturyLink provided it as a DSL/Router combo). Would not connect (nor would my iPhone 4s or my wife's iPhone 4) until I accessed the router's setting and changed to broadcast on Channel 6 and then IPad connected. I suspect the only reason the iPhone were still connected to the Linksys network is that they were before I "upgraded to iOS 6. Even after 6.0.2 the iPad and both iPhones will not connect to some home networks (its random) although thye will connect to public networks e.g. McDonald's, Panera, etc.

Recently purchased iPad Mini. Downloaded iOS 6.0.1. Could not get it to connect to Home WiFi using Linksys G Router. Have another Wifi Network in Home (CenturyLink provided it as a DSL/Router combo). Would not connect (nor would my iPhone 4s or my wife's iPhone 4) until I accessed the router's setting and changed to broadcast on Channel 6 and then IPad connected. I suspect the only reason the iPhone were still connected to the Linksys network is that they were before I "upgraded to iOS 6. Even after 6.0.2 the iPad and both iPhones will not connect to some home networks (its random) although thye will connect to public networks e.g. McDonald's, Panera, etc.

Put jpg image on a canvas

I need help getting a jpg image to appear on a canvas of a set size. I can get the image to appear, but instead of appearing on the canvas, the canvas appears on it, covering up most of the image. Also, the other components cover up parts of the image. I want the image to appear only on the canvas. So far I was using the drawImage command. Does anyone have any better ideas? Please respond.
Thanks, Ben Anders

bbritta, thanks for the reply. Here is some of the code. Here is the part that makes the canvas: I am using a gridbag layout. THe canvas appears in the middle of the frame and there are buttons above and below it.
Canvas can = new Canvas();
can.setBackground(Color.white);
can.addMouseListener(this);
can.addMouseMotionListener(this);
constraints.insets = new Insets(5, 20, 20, 20);
constraints.fill = GridBagConstraints.BOTH;
constraints.ipadx = 450;
constraints.ipady = 350;
constraints.weightx = 0;
constraints.weighty = 0;
constraints.gridwidth = GridBagConstraints.REMAINDER;
gridbag.setConstraints(can, constraints);
add(can);
Then I call this paint method: The Width and Height of the U.S. map are set to the same size as the canvas.
public void paint(Graphics g)
Image map = Toolkit.getDefaultToolkit().getImage("US map.jpg");
setSize(map.getWidth(this), map.getHeight(this));
g.drawImage(map, 0, 0, this);
What I would like to do is say something like can.add(map);, but that doesn't seem to work.
Please respond.

How to put Stored Procedure in Receiver JDBC channel

Hi all,Good Evening,Iam using a JDBC to JDBC scenario in which I have to move the data from database into XI and we all know that the Interfaces which require stored procedures on Oracle database server for publishing the data needs to be called in combination of BPM & Receiver JDBC adapter.
        In this method, a dummy interface will be created for triggering the process. This interface could be designed using any adapter which works on polling mechanism (sender JDBC/File). Dummy interface will invoke a small BPM designed for each business object. BPM will make a synchronous call to Oracle database by calling underlying stored procedure. Stored procedure will return the result set by using a cursor. BPM will send this result set to target application.
        Now my question is how to put a stored procedure in a receiver JDBC channel which need to collect the data from database when BPM makes a synchronous call.
       Because it is required in my scenario,can any one tell me how and where to put stored Procedure in JDBC receiver channel.
Thanks in advance,
Regards,
Prajwal

Your action should be EXECUTE for stored procedures in Message mapping.
<StatementName5>
<storedProcedureName action=u201D EXECUTEu201D>
    <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName5>
action=EXECUTE
Statements with this action result in a stored procedure being executed. The name of the element is interpreted as the name of the stored procedure in the database. If you use the optional <table> element, the value specified here is used as the stored procedure name. This enables you, for example, to define stored procedure names containing non-XML-compatible characters or characters that prevent them from being used in interface definitions in the Integration Builder/PCK. If specified, <table> must be the first element in the block within <dbTableName>.
The elements within the stored procedure are interpreted as parameters. They can optionally have the attribute isInput=u201C1u201C (input parameter) or isOutput=u201C1u201C (output parameter) or both (INOUT parameter). If both attributes are missing, the element is interpreted as an input parameter. The parameter names must be identical to those of the stored procedure definition.
The attribute type=<SQL-Datatype> , which describes the valid SQL data type, is mandatory for all parameter types (IN, OUT, INOUT).
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/10/15/jdbc-adapter-execution-mode-chained-or-unchained
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi

Receiver Communication channel was not showning in C C Monitoring

Hi,
I am Doing File-to Idoc/Idoc-toFile Scenario. it is shwong these errors plz help meout
In MSG DATA
Error Category XI_J2EE_ADAPTER_XI_HANDLER
Error Code GENERAL_ERROR
In Audit Log
Transmitting the message to endpoint http://apollo:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.
reg,
suresh

Dear Suresh,
It appears be an authorization issue. Check the credentials given.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Possible Tips:
Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
If the error is in Adapter Engine
then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
May be wrong password for user XIISUSER
May be wrong password for user XIAFUSER
for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Regards,
Naveen.

SOAP ACTION IN SOAP ADAPTER and PROGRAM IF IN RFC COMMUNICATION CHANNEL

Hi Gurus,
Please Explain me what is SOAP action in soap adapter what is the use of it.
What is the Program ID in the RFC communication channel and what is the use of it.
Please tell me in Detail.
Thanks and Regards,
RAM.

Hi,
Please Explain me what is SOAP action in soap adapter what is the use of it.
As of W3C definition:
The SOAPAction HTTP request header field can be used to indicate the intent of the SOAP HTTP request. The value is a URI identifying the intent. SOAP places no restrictions on the format or specificity of the URI or that it is resolvable. An HTTP client MUST use this header field when issuing a SOAP HTTP Request.
The presence and content of the SOAPAction header field can be used by servers such as firewalls to appropriately filter SOAP request messages in HTTP. The header field value of empty string ("") means that the intent of the SOAP message is provided by the HTTP Request-URI. No value means that there is no indication of the intent of the message.
Putting things simple, this is an identifier of an operation that you want to execute in the web service (as one web service can offer multiple actions).
What is the Program ID in the RFC communication channel and what is the use of it.
Again, this is an identifier for both: RFC sender and receiver systems. It tells the receiver where to listen for connections, and the sender - where to send the data. It works a little bit like a port number in HTTP communication, but with less restrictions.
Hope this helps,
Greg

Could not forward to JCA adapter : putting .jpg image failed : receiver communication channel

Similar Messages

Maybe you are looking for