Could not setup jdbc pool for tx sqlserver

When I tried yto setup a sqlserver tx pool using weblogic.jdbcx.sqlserver.SQLServerDataSource
as tge driver class, I got hte follwing error:
[BEA][SQLServer JDBC Driver][SQLServer]Could not find stored pocedure 'master..xp_jdbc_open'.
Thanks,

See Installing Stored Procedures for JTA
at http://e-docs.bea.com/wls/docs81/jdbc_drivers/mssqlserver.html#1056938.
"Henry Hiu" <[email protected]> wrote in message news:[email protected]..
>
When I tried yto setup a sqlserver tx pool using weblogic.jdbcx.sqlserver.SQLServerDataSource
as tge driver class, I got hte follwing error:
[BEA][SQLServer JDBC Driver][SQLServer]Could not find stored pocedure 'master..xp_jdbc_open'.
Thanks,

Similar Messages

  • Could not expand chunk pool for ip nat mode. No Memory available - process="chunk Manager"

    Hi,
    One my clients 1841 Router giving following error on the Router, when i have checked after after seeing this error it may cause due to error some momory leak issue. Since its running almost newer version of IOS, can you please suggest which version IOS i can go ahead.
    Router Version: c1841-advsecurityk9-mz.124-24.T8.bin
    Thanks and Regard,
    STN

    Hi,
    I'm not sure if IOS update will solve your issue as error mentioned related to NAT.
    I suspect a lot of internal hosts or machines are being translated.
    Could you upgrade the router's RAM or temporarily add this global command?
    ip nat translation timeout x
    Issue a 'clear ip nat translation' and observe again.
    Sent from Cisco Technical Support iPhone App

  • Could not setup user ABC's credentials for this AE program

    Hi Guys,
    I was trying to run AE SCRTY_OPRCLS and got the below error.
    "Could not setup user ABC's credentials for this AE program. Perhaps
    this AE request is running outside the user's allowed signon times"
    I run the AE again without any error so I think it should be allowed signon times issue. That is set up for Permission list, I think, which is from 0:00 to 23:59. Does anyone know if there is a configuration step about this?
    Thanks in advance,
    Bob

    Hi all,
    I ran into the same problem today and came accross this on the support site: disabling the PSAESERV: E-AE: How to Disable PSAESRV in a Process Scheduler Domain [ID 659343.1]. This helps and does not seem to hinder running any application engine processes. Good luck.

  • While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

    While installing the itunes setup i am getting an error"Could not register type library for file ipodsevice.exe" What to do now?

    Try posting in the iTunes forum.  You have an iTunes problem not an iPod problem

  • Org.hibernate.PropertyNotFoundException: Could not find a getter for id in

    [skumar@aithdell3 events]$ java EventManager
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment <clinit>
    INFO: Hibernate 3.2.3
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment <clinit>
    INFO: hibernate.properties not found
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment buildBytecodeProvider
    INFO: Bytecode provider name : cglib
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment <clinit>
    INFO: using JDK 1.4 java.sql.Timestamp handling
    May 15, 2008 8:39:42 PM org.hibernate.cfg.Configuration configure
    INFO: configuring from resource: /hibernate.cfg.xml
    May 15, 2008 8:39:42 PM org.hibernate.cfg.Configuration getConfigurationInputStream
    INFO: Configuration resource: /hibernate.cfg.xml
    May 15, 2008 8:39:42 PM org.hibernate.cfg.Configuration addResource
    INFO: Reading mappings from resource : Event.hbm.xml
    May 15, 2008 8:39:43 PM org.hibernate.cfg.HbmBinder bindRootPersistentClassCommonValues
    INFO: Mapping class: Event -> EVENTS
    May 15, 2008 8:39:43 PM org.hibernate.cfg.Configuration doConfigure
    INFO: Configured SessionFactory: null
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: Using Hibernate built-in connection pool (not for production use!)
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: Hibernate connection pool size: 1
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: autocommit mode: false
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: using driver: org.hsqldb.jdbcDriver at URL: jdbc:hsqldb:sql://localhost
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: connection properties: {user=sa, password=****}
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: RDBMS: HSQL Database Engine, version: 1.8.0
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC driver: HSQL Database Engine Driver, version: 1.8.0
    May 15, 2008 8:39:44 PM org.hibernate.dialect.Dialect <init>
    INFO: Using dialect: org.hibernate.dialect.HSQLDialect
    May 15, 2008 8:39:44 PM org.hibernate.transaction.TransactionFactoryFactory buildTransactionFactory
    INFO: Using default transaction strategy (direct JDBC transactions)
    May 15, 2008 8:39:44 PM org.hibernate.transaction.TransactionManagerLookupFactory getTransactionManagerLookup
    INFO: No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Automatic flush during beforeCompletion(): disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Automatic session close at end of transaction: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC batch size: 15
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC batch updates for versioned data: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Scrollable result sets: enabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC3 getGeneratedKeys(): disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Connection release mode: auto
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Default batch fetch size: 1
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Generate SQL with comments: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Order SQL updates by primary key: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory createQueryTranslatorFactory
    INFO: Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory
    May 15, 2008 8:39:44 PM org.hibernate.hql.ast.ASTQueryTranslatorFactory <init>
    INFO: Using ASTQueryTranslatorFactory
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Query language substitutions: {}
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JPA-QL strict compliance: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Second-level cache: enabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Query cache: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory createCacheProvider
    INFO: Cache provider: org.hibernate.cache.NoCacheProvider
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Optimize cache for minimal puts: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Structured second-level cache entries: disabled
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Echoing all SQL to stdout
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Statistics: disabled
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Deleted entity synthetic identifier rollback: disabled
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Default entity-mode: pojo
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Named query checking : enabled
    May 15, 2008 8:39:45 PM org.hibernate.impl.SessionFactoryImpl <init>
    INFO: building session factory
    Intial session factory creation failed org.hibernate.PropertyNotFoundException: Could not find a getter for id in class Event
    Exception in thread "main" java.lang.ExceptionInInitializerError
    at HibernateUtil.<clinit>(HibernateUtil.java:18)
    at EventManager.main(EventManager.java:11)
    Caused by: org.hibernate.PropertyNotFoundException: Could not find a getter for id in class Event
    at org.hibernate.property.BasicPropertyAccessor.createGetter(BasicPropertyAccessor.java:282)
    at org.hibernate.property.BasicPropertyAccessor.getGetter(BasicPropertyAccessor.java:275)
    at org.hibernate.tuple.PropertyFactory.getGetter(PropertyFactory.java:168)
    at org.hibernate.tuple.PropertyFactory.buildIdentifierProperty(PropertyFactory.java:44)
    at org.hibernate.tuple.entity.EntityMetamodel.<init>(EntityMetamodel.java:123)
    at org.hibernate.persister.entity.AbstractEntityPersister.<init>(AbstractEntityPersister.java:434)
    at org.hibernate.persister.entity.SingleTableEntityPersister.<init>(SingleTableEntityPersister.java:109)
    at org.hibernate.persister.PersisterFactory.createClassPersister(PersisterFactory.java:55)
    at org.hibernate.impl.SessionFactoryImpl.<init>(SessionFactoryImpl.java:226)
    at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1294)
    at HibernateUtil.<clinit>(HibernateUtil.java:14)
    How can i fix this exception
    Please help me.
    Thanks in advance

    [skumar@aithdell3 events]$ java EventManager
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment <clinit>
    INFO: Hibernate 3.2.3
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment <clinit>
    INFO: hibernate.properties not found
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment buildBytecodeProvider
    INFO: Bytecode provider name : cglib
    May 15, 2008 8:39:41 PM org.hibernate.cfg.Environment <clinit>
    INFO: using JDK 1.4 java.sql.Timestamp handling
    May 15, 2008 8:39:42 PM org.hibernate.cfg.Configuration configure
    INFO: configuring from resource: /hibernate.cfg.xml
    May 15, 2008 8:39:42 PM org.hibernate.cfg.Configuration getConfigurationInputStream
    INFO: Configuration resource: /hibernate.cfg.xml
    May 15, 2008 8:39:42 PM org.hibernate.cfg.Configuration addResource
    INFO: Reading mappings from resource : Event.hbm.xml
    May 15, 2008 8:39:43 PM org.hibernate.cfg.HbmBinder bindRootPersistentClassCommonValues
    INFO: Mapping class: Event -> EVENTS
    May 15, 2008 8:39:43 PM org.hibernate.cfg.Configuration doConfigure
    INFO: Configured SessionFactory: null
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: Using Hibernate built-in connection pool (not for production use!)
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: Hibernate connection pool size: 1
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: autocommit mode: false
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: using driver: org.hsqldb.jdbcDriver at URL: jdbc:hsqldb:sql://localhost
    May 15, 2008 8:39:43 PM org.hibernate.connection.DriverManagerConnectionProvider configure
    INFO: connection properties: {user=sa, password=****}
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: RDBMS: HSQL Database Engine, version: 1.8.0
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC driver: HSQL Database Engine Driver, version: 1.8.0
    May 15, 2008 8:39:44 PM org.hibernate.dialect.Dialect <init>
    INFO: Using dialect: org.hibernate.dialect.HSQLDialect
    May 15, 2008 8:39:44 PM org.hibernate.transaction.TransactionFactoryFactory buildTransactionFactory
    INFO: Using default transaction strategy (direct JDBC transactions)
    May 15, 2008 8:39:44 PM org.hibernate.transaction.TransactionManagerLookupFactory getTransactionManagerLookup
    INFO: No TransactionManagerLookup configured (in JTA environment, use of read-write or transactional second-level cache is not recommended)
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Automatic flush during beforeCompletion(): disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Automatic session close at end of transaction: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC batch size: 15
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC batch updates for versioned data: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Scrollable result sets: enabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JDBC3 getGeneratedKeys(): disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Connection release mode: auto
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Default batch fetch size: 1
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Generate SQL with comments: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Order SQL updates by primary key: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory createQueryTranslatorFactory
    INFO: Query translator: org.hibernate.hql.ast.ASTQueryTranslatorFactory
    May 15, 2008 8:39:44 PM org.hibernate.hql.ast.ASTQueryTranslatorFactory <init>
    INFO: Using ASTQueryTranslatorFactory
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Query language substitutions: {}
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: JPA-QL strict compliance: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Second-level cache: enabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Query cache: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory createCacheProvider
    INFO: Cache provider: org.hibernate.cache.NoCacheProvider
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Optimize cache for minimal puts: disabled
    May 15, 2008 8:39:44 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Structured second-level cache entries: disabled
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Echoing all SQL to stdout
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Statistics: disabled
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Deleted entity synthetic identifier rollback: disabled
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Default entity-mode: pojo
    May 15, 2008 8:39:45 PM org.hibernate.cfg.SettingsFactory buildSettings
    INFO: Named query checking : enabled
    May 15, 2008 8:39:45 PM org.hibernate.impl.SessionFactoryImpl <init>
    INFO: building session factory
    Intial session factory creation failed org.hibernate.PropertyNotFoundException: Could not find a getter for id in class Event
    Exception in thread "main" java.lang.ExceptionInInitializerError
    at HibernateUtil.<clinit>(HibernateUtil.java:18)
    at EventManager.main(EventManager.java:11)
    Caused by: org.hibernate.PropertyNotFoundException: Could not find a getter for id in class Event
    at org.hibernate.property.BasicPropertyAccessor.createGetter(BasicPropertyAccessor.java:282)
    at org.hibernate.property.BasicPropertyAccessor.getGetter(BasicPropertyAccessor.java:275)
    at org.hibernate.tuple.PropertyFactory.getGetter(PropertyFactory.java:168)
    at org.hibernate.tuple.PropertyFactory.buildIdentifierProperty(PropertyFactory.java:44)
    at org.hibernate.tuple.entity.EntityMetamodel.<init>(EntityMetamodel.java:123)
    at org.hibernate.persister.entity.AbstractEntityPersister.<init>(AbstractEntityPersister.java:434)
    at org.hibernate.persister.entity.SingleTableEntityPersister.<init>(SingleTableEntityPersister.java:109)
    at org.hibernate.persister.PersisterFactory.createClassPersister(PersisterFactory.java:55)
    at org.hibernate.impl.SessionFactoryImpl.<init>(SessionFactoryImpl.java:226)
    at org.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:1294)
    at HibernateUtil.<clinit>(HibernateUtil.java:14)
    How can i fix this exception
    Please help me.
    Thanks in advance

  • Could not load file or assembly 'Microsoft.SqlServer.Replication, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'

    I am using .net application built in .net 2.0 using SQL server Express 2005 Replication publication functionality. Application setup is in 32 bit.
    Now i am running this .net application setup on Windows-7 [64 bit]. It gets installed successfully with SQL server Express 2005.
    But when starting the application getting below error while performing Synchronization of subscription and publication via .net app.  I have checked that Microsoft.SqlServer.Replication.dll file is installed in GAC having same version
    [Version=9.0.242.0]. It is working fine on 32-bit OS.    
    Below is error details.
    TITLE: SETSynchConsole
    Could not load file or assembly 'Microsoft.SqlServer.Replication, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. An attempt was made to load a program with an incorrect format.

    Hi deshpasu,
    According to your description, you install SQL Server Express 2005, and OS is 64bit. If your assembly is running as a 32 bit process and it is unable to load a 64 bit dll, we get a exception , so we need to verify if you install Microsoft SQL Server
    2005 Replication Management Objects. These are not installed by default database engine install.
    This is 64bit OS so you should install 64bit "Microsoft SQL Server 2005 Replication Management Objects" from online feature pack of SQL Server 2005.
    If SQL Express x86 setup (with Database Engine, Replication selected at setup) installs Microsoft.SqlServer.Replication and so this load error does not occur on 32bit systems.
    For more information, see:
    http://stackoverflow.com/questions/41449/i-get-a-an-attempt-was-made-to-load-a-program-with-an-incorrect-format-error-o
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.

    When I try to install Connection Broker on a Windows 2012 R2 Server in a Windows 2003 domain I get this error:
    The Remote Desktop Connection Broker server could not enumerate the targets for the provider named NULL from the database.
    Pooled virtual desktop collection name: NULL
    Error: Logon to the database failed.
    I have added both the Connection Broker server and the 2 remote desktop servers (also Windows 2012 R2 Servers) to the "Windows Authorization Access Group" in the domain according to this: http://support.microsoft.com/kb/331951
    But it still does not work :-(
    I keep getting same error....
    Any idea what I might be missing ?

    Hi,
    Thank you for posting in Windows Server Forum.
    Firstly please let us know by which method you have setup RDS role. You can have more advantage and feature when you will install with Standard deployment instead of Quick start deployment. So if you have setup with quick start option then you can try installing
    with standard type and check the result.
    In addition, please check SQL server database is properly configured for RDS server. Also check that domain controller properly communicates. Kindly go through below thread for more information.
    Server 2012 RDS - Remote
    Desktop Connection Broker Client failed to redirect the user domain\username. Error: NULL
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Could not reserve enough space for object heap in Jdeveloper 11g R1

    Hi,
    I tried to increase the JVM heap size with Virtual machine = server and the value as -Xmx512m -XX:MaxPermSize=512M -Djbo.debugoutput=console in the project properties->Run/Debug/Profile->Default-Edit, but still getting the below error.
    Any help is appreciated.
    [waiting for the server to complete its initialization...]
    JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
    WLS Start Mode=Development
    CLASSPATH=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1.5-3\lib\tools.jar;D:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.2.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.0/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;d:\source\FCUBSInstaller.jar;D:\Olite10g_1\MOBILE\Sdk\bin\OLITE40.JAR;;
    PATH=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;D:\Oracle\MIDDLE~1\JDK160~1.5-3\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1.5-3\bin;D:\Olite10g_1\jre\1.4.2\bin\client;D:\Olite10g_1\jre\1.4.2\bin;D:\Software\oracle\product\10.2.0\client_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;D:\software\Clearcase 7.0\common;D:\software\Clearcase 7.0\ClearCase\bin;D:\Olite10g_1\MOBILE\sdk\bin;C:\Program Files\Liquid Technologies\Liquid XML Studio 2011\XmlDataBinder9\Redist9\cpp\win32\bin;D:\Software\Liquid Technologies\Liquid XML Studio 2011\XmlDataBinder9\Redist9\cpp\win32\bin;D:\software\oracle10g\BIN;D:\Jdev10g\jdk\bin;;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
    * To start WebLogic Server, use a username and *
    * password assigned to an admin-level user. For *
    * server administration, use the WebLogic Server *
    * console at http:\\hostname:port\console *
    starting weblogic with Java version:
    java version "1.6.0_14"
    Java(TM) SE Runtime Environment (build 1.6.0_14-b08)
    Java HotSpot(TM) Client VM (build 14.0-b16, mixed mode)
    Starting WLS with line:
    D:\Oracle\MIDDLE~1\JDK160~1.5-3\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=D:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Xmx512m -XX:MaxPermSize=512M -Djbo.debugoutput=console -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Ddomain.home=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1 -Dcommon.components.home=D:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=D:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1 -Doracle.server.config.dir=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.security.jps.config=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=D:\software\oracle\product\10.2.0\client_1\modules\oracle.ossoiap_11.1.1,D:\software\oracle\product\10.2.0\client_1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ANURAD~1\APPLIC~1\JDEVEL~1\SYSTEM~1.36\DEFAUL~1\oracle\store\gmds -Xms512m -Xmx512m -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    Process exited.

    This is telling you that there is not enough memory for the heap size you've specified. Increasing the heap size makes this worse, not better. You need more physical memory.
    john

  • Could not find installation information for this machine contact applecare

    I installed Lion on my MacBook, worked great. After 2 months I wanted to clean install the Lion on the same Macbook; went to Apple Support website and there they had instructions on how to clean install Lion.
    I followed the instructions and erased the partition where the OS Lion was installed. Then I tried to re-install it, it kept saying "could not find installation information for this machine contact applecare".
    When I contacted apple care, they asked me to pay 49 dollars in order to get help from them. I already paid the cost for the LION OS and now they want another 49 bucks. This is just insane. I'm not a fan of Apple, Mac or iCrap. But I was thinking to buy a new Mac after selling this one. Now I have no interest in buying any Mac product. Windows 7 is much much better than Lion OS X.
    I have to fix this before I sell it on ebay so Has anyone tried to clean install Lion ?

    I'm with you, OS X Lion has turned a lot of stomachs.
    Here's how to go about what you need to do:
    Get out your 10.6 installer disk, make sure it's clean and polished (bit of rubbing alcohol and a very soft cloth)
    Get 2 blank external drives, connect one and hold c and boot off the 10.6 installer disk, use Disk Utility to format the external drive use
    Erase>Security Option> Zero all data, wait
    under the partition tab
    1 partition, option MBR, format FAT
    Disconnect and reboot.
    Repeat the same procedure for the second drive and format the
    Erase>Security Option> Zero all data, wait
    under the partition tab
    1 partition, option GUID, format OS X Extended Journaled
    Quit and install 10.6 on the external GUID drive.
    Reboot holding the option key, you can boot off the 10.6 external drive, setup, use your same user name as before, update to 10.6.8, grab your files off the OSX Lion partition, transfer a copy to the FAT formatted drive.
    What you do is your choice,
    To continue using the machine under 10.6
    you can erase the entire (select the whole internal drive, not just the OS X Lion Paritition) and use Carbon Copy Cloner to clone 10.6 external to the internal drive,
    To sell the machine with a fresh 10.6 install
    or simply hold c boot off the 10.6 installer disk and install 10.6 on the internal drive and upon reboot, just hard shutdown by pressing the powerbutton before going through setup. The next person who gets the machine will be greeted by the setup again.
    You can use the files on the FAT drive on your Windows PC in some cases.
    Else download the free LibreOffice and it can read quite a few file formats.

  • SecureSocketListener: Could not setup context and create a secure socket on 142.182.112.123:5555 : java.security.cert.CertificateParsingException: PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. java.security.cert.Certifica

    HI Team,
    while starting the node manager in wls 8.1 and java1.4
    we are facing this issue plz help on this immediately.
    + CLASSPATH=/srvrs/bdv/patches/CR210310_81sp4.jar:/usr/java14/lib/tools.jar:/srvrs/bdv/bea/weblogic81/server/lib/weblogic_sp.jar:/srvrs/bdv/bea/weblogic81/server/lib/weblogic.jar::/srvrs/bdv/bea
    + export CLASSPATH
    + export PATH
    + set -x
    + [ 5555 !=  ]
    + [ 142.182.112.123 !=  ]
    + /usr/java14/bin/java -Xms32m -Xmx32m -Dweblogic.security.SSL.enforceConstraints=off -Djava.security.policy=/srvrs/bdv/bea/weblogic81/server/lib/weblogic.policy -Dweblogic.nodemanager.javaHome=/usr/java14 -DListenAddress=142.182.112.123 -DListenPort=5555 weblogic.NodeManager
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <NodeManager: for information on command line options,  try "java weblogic.NodeManager -h">
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <Starting NodeManager >
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <Setting listenAddress to 142.182.112.123..>
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <Setting listenPort to 5,555..>
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <Setting java home to '/usr/java14'>
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <Effective values of properties :
            ListenAddress=142.182.112.123
            ListenPort=5555
            ListenerType=secureSocket
            SavedLogsDirectory=NodeManagerLogs
            NativeVersionEnabled=true
            TrustedHosts=nodemanager.hosts
            StartTemplate=../../server/lib/unix/nodemanager.sh
            ReverseDnsEnabled=false
            ScavangerDelaySeconds=180
            PIDFileReadRetryCount=0
            WeblogicHome=null
            bea.home=null
            JavaHome=/usr/java14
            PropertiesVersion=8.1
    >
    <Sep 15, 2013 7:35:26 AM EDT> <Info> <NodeManager> <Saving logs in'NodeManagerLogs'>
    <Sep 15, 2013 7:35:31 AM EDT> <Info> <[email protected]:5555> <Reading private key and certificate chain from the keystore /srvrs/bdv/bea/weblogic81/server/lib/DemoIdentity.jks. KeyStore type = jks, Using keystore passphrase = true, Alias = DemoIdentity>
    <Sep 15, 2013 7:35:31 AM EDT> <Info> <[email protected]:5555> <Reading trusted CAs from the keystore /srvrs/bdv/bea/weblogic81/server/lib/DemoTrust.jks. KeyStore type = jks, Using keystore passphrase = true>
    <Sep 15, 2013 7:35:31 AM EDT> <Info> <[email protected]:5555> <Reading trusted CAs from the keystore /usr/java14/jre/lib/security/cacerts. KeyStore type = jks, Using keystore passphrase = false>
    SecureSocketListener: Could not setup context and create a secure socket on 142.182.112.123:5555 : java.security.cert.CertificateParsingException: PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.
    java.security.cert.CertificateParsingException: PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11
            at com.certicom.security.cert.internal.x509.X509V3CertImpl.<init>(Unknown Source)
            at com.certicom.tls.interfaceimpl.CertificateSupport.addTrustedCertificate(Unknown Source)
            at com.certicom.net.ssl.SSLContext.addTrustedCertificate(Unknown Source)
            at com.bea.sslplus.CerticomSSLContext.addTrustedCA(Unknown Source)
            at weblogic.security.utils.SSLContextWrapper.addTrustedCA(SSLContextWrapper.java:52)
            at weblogic.nodemanager.internal.SecureSocketListener.run(SecureSocketListener.java:57)
            at weblogic.nodemanager.internal.GenericListener.startListener(GenericListener.java:16)
            at weblogic.nodemanager.NodeManager.startSecureSocketListener(NodeManager.java:461)
            at weblogic.nodemanager.NodeManager.init(NodeManager.java:305)
            at weblogic.nodemanager.NodeManager.run(NodeManager.java:511)
            at weblogic.NodeManager.main(NodeManager.java:31)
    Thanks,
    Eswar

    Hi,
    Did you find a solution to this? We are running into the same issue since upgrading to Weblogic 9.2.3 for WebCT Vista 8.0.4.
    Thanks,
    Ron

  • Reporting services with R2 on DPM2012 - Could not establish trust relationship for the SSL/TLS secure channel

    Hi everyone,
    A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
    error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
    Here are the symptoms:
    1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
    2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
    3.The information given in the logs and relevant config files is shown below:
    <<RSREPORTSERVER.CONFIG>>
    <ConnectionType>Default</ConnectionType>
    <LogonUser></LogonUser>
    <LogonDomain></LogonDomain>
    <LogonCred></LogonCred>
    <InstanceId>MSRS10_50.MSDPM2012</InstanceId>
    <InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
    <Add Key="SecureConnectionLevel" Value="0"/>
    <Add Key="CleanupCycleMinutes" Value="10"/>
    <Add Key="MaxActiveReqForOneUser" Value="20"/>
    <Add Key="DatabaseQueryTimeout" Value="120"/>
    <Add Key="RunningRequestsScavengerCycle" Value="60"/>
    <Add Key="RunningRequestsDbCycle" Value="60"/>
    <Add Key="RunningRequestsAge" Value="30"/>
    <Add Key="MaxScheduleWait" Value="5"/>
    <Add Key="DisplayErrorLink" Value="true"/>
    <Add Key="WebServiceUseFileShareStorage" Value="false"/>
    <!--  <Add Key="ProcessTimeout" Value="150" /> -->
    <!--  <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
    <!--  <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
    <!--  <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
    <!--  <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
    <Add Key="WatsonFlags" Value="0x0428"/>
    <Add Key="WatsonDumpOnExceptions" 
    4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
    running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
    exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
    not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
    The remote certificate is invalid according to the validation procedure.
       at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
    Exception exception)
    5:I do have an SCCM site on the default web site used by SMS clients but on different ports
    I am stumped.Somebody please give some advice
    Thank you

    Hi
    This is an old post but did you come right?

  • BEA-141230 Could Not locate descriptor file for System Resource: DS name

    Guys,
    When I start the Admin and Managed server ..I get below warning message.
    *<Warning> <Management> <BEA-141230> <Could Not locate descriptor file for System Resource : datasource1.>*
    I know that weblogic server is unable to locatie datasource1.xml file at <SOA_HOME>/user_projects/domains/base_domain/config/jdbc
    Is there any way to to get rid off from this error? I tried to delete datasource from weblogic Admin console, but get below error:
    java.lang.NullPointerException
    All changes have been activated. No restarts are necessary.
    Errors were encountered while performing this delete operation.
    Thanks,
    Ab

    Are you starting servers with the root user? make sure that using whichever user you are starting server, it has full access on MW_Home and it's sub-directories. You may consider raising a support SR.
    Regards,
    Anuj

  • "Could not get needed resources for application to be launched (id=-669)"

    I keep getting this message
    Setup Resourses Status
    Could not get needed resources for application [App name. edir path] to
    be launched (id=-669).
    Problem: Unable to connect to server [server name]
    I am able to browse to the server no problem as well as map a drive
    directly to it?
    I am not sure why I am getting this ?

    This is under the "Environment" portion of the "Run Tab"
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Support Forums Volunteer Sysop
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared either Novell or any rational human.
    <[email protected]> wrote in message
    news:[email protected]...
    > Craig where do I to determine that? I know it has to run as admin but I
    > am not sure if it is set like that...
    >
    >> Is the application configured to run "Normal", "Secure System User", or
    >> "Unsecure System User".
    >>
    >> Methods #2 and #3 require the workstation not the user to have rights
    > and
    >> require the use of UNC instead of a mapped drive.
    >>
    >> --
    >> Craig Wilson - MCNE, MCSE, CCNA
    >> Novell Support Forums Volunteer Sysop
    >>
    >> Novell does not officially monitor these forums.
    >>
    >> Suggestions/Opinions/Statements made by me are solely my own.
    >> These thoughts may not be shared either Novell or any rational human.
    >>
    >> <[email protected]> wrote in message
    >> news:[email protected]...
    >> > It is associated with the user and I can get access to the exe via
    > their
    >> > PC using their login
    >> >
    >> >> ,
    >> >> > Could not get needed resources for application [App name. edir
    > path]
    >> > to
    >> >> > be launched (id=-669).
    >> >> >
    >> >> > Problem: Unable to connect to server [server name]
    >> >> >
    >> >> > I am able to browse to the server no problem as well as map a drive
    >> >> > directly to it?
    >> >> >
    >> >> -669 is "wrong password" IIRC. Is this app associated to user or WS,
    > ie
    >> > is
    >> >> t trying to access that path wth the User's or Workstation's
    >> > credentials?
    >> >>
    >> >> - Anders Gustafsson, Engineer, CNE6, ASE
    >> >> NSC Volunteer Sysop
    >> >> Pedago, The Aaland Islands (N60 E20)
    >> >>
    >> >> Novell does not monitor these forums officially.
    >> >> Enhancement requests for all Novell products may be made at
    >> >> http://support.novell.com/enhancement
    >> >>
    >> >> Using VA 5.51 build 315 on Windows 2000 build 2600
    >> >>
    >> >
    >>
    >>
    >

  • Could not load file or assembly Microsoft.SqlServer.management.sdk.sfc version 11.0.0.0 on Visual Studio Ultimate 2014 Update 4

    I am getting the infamous  "Could not load file or assembly Microsoft.SqlServer.management.sdk.sfc version 11.0.0.0." The set up of my system is Visual Studio 2013 Ultimate update 4 and my SQL server is 12.0.2000 Express. I am also using SQL
     management studio 2014. I read other comments and blogs, and reinstalled the SQL Express 12.0.2000, but no luck yet. 

    Hi payam49er,
    >>I am
    getting the infamous "Could not load file or assembly Microsoft.SqlServer.management.sdk.
    sfc version 11.0.0.0."
    Based on your error, could you please tell me what you do operation and then you get the error message?
    Could you please tell me if you add a data connection from Server Explorer Window in Visual studio 2013 Ultimate update
    4 and then you get the error message?
    If yes, to check if the issue is related to the VS IDE issue, I suggest you can execute the following commands to check if it can
    help you add  data connection in VS2013 Ultimate Update 4.
    (1)I suggest you can run your VS in safe mode by executing Devenv.exe /SafeMode to add a data connect again.
    (2)I suggest you can use the Devenv.exe /ResetSettings to restores the IDE's default settings, optionally resets to the specified
    VSSettings file.
    (3)You can execute the Devenv.exe /ResetAddin to remove commands and command UI associated with the specified Add-in.
    In addition, if you used the SQL Server Express to connect the data in VS, you need to specify the server name
    as MyComputerName\SQLEXPRESS. If you used the SQL Server to connect the data in VS. Please you try to specify the server name as MyComputerName\InstanceName here to check the result.
    If still no help, according the error, it indicates that the problem is that the system cannot locate the right assembly (SQL
    Server SDK). So I think you may get better response and solutions if you consult on SQL Server forums.
    Thank you for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Log shipping Could not retrieve backup settings for primary ID

    hello,
    I implemented log shipping in our server the process of implementation went fine but when I view job history I found
    Message
    2014-06-11 12:00:01.53    *** Error: Could not retrieve backup settings for primary ID '99817903-626e-4380-bcf1-c09ca6f48b6d'.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-06-11 12:00:01.53    *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
    2014-06-11 12:00:01.53    *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-06-11 12:00:01.53    *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
    2014-06-11 12:00:01.53    *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
    2014-06-11 12:00:01.53    *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
    2014-06-11 12:00:01.53    ----- END OF TRANSACTION LOG BACKUP   -----
    Exit Status: 1 (Error)
    also I check for database ID using select * from msdb..log_shipping_primary_databases
    your help is appreciated.
    Please Mark it as Answered if it answered your question
    OR mark it as Helpful if it help you to solve your problem
    Elmozamil Elamir Hamid
    MCSE Data Platform
    MCITP: SQL Server 2008 Administration/Development
    MCSA SQL Server 2012
    MCTS: SQL Server Administration/Development
    MyBlog

    Thank you all for your contribution.
    After testing and debugging I found that when they move their database from one server (server2) to another server (server1) the database still using the old name (server2) which you can findusing this script:
    SELECT @@SERVERNAME
    so the replication can't retrieve information, unfortunately for me it is difficult to rename the server because it sis development server so they need to make analysis about side effects if we renamed it. 
    Please Mark it as Answered if it answered your question
    OR mark it as Helpful if it help you to solve your problem
    Elmozamil Elamir Hamid
    MCSE Data Platform
    MCITP: SQL Server 2008 Administration/Development
    MCSA SQL Server 2012
    MCTS: SQL Server Administration/Development
    MyBlog

Maybe you are looking for

  • How I can display the values in one row when they come from the same colum

    This query SELECT sorints_ints_code FROM saturn.sorints a, connman.cc_adm_prospect_master WHERE sorints_ints_code like 'Z%' and sorints_pidm = prospect_pidm give me the results of ZA ZB ZC I want to use this query in a cursor to update a column in an

  • How much for a replacement router?

    I have the Rev C router by actiontec. I forget the model number. How much to replace it for the Rev E?

  • ITunes library will not allow me to put ALL my music in

    I have had an iPod for quiet some time now, and I have only recently come across a problem. This problem only seemed to occur when I downloaded the latest version of iTunes: 6.0.4.2 When i go to put music into the library, it doesn't actually add all

  • Need help displaying item based on pl/sql anonymous block

    This is probably something really simple but I'm stuck..... On purchase order, I want to show related parent project name and ID. What is the best way to do it? I have created a region based on pl/sql anonymous block, and that works, but the data is

  • Inactivate access to mail

    Good Morning! Hi, i would like to inactivate access to mail for a list of users. As stated in the reference doc, I can set mailUserStatus to 'inactive' to state the users mail account is inactive and a transient failure is returned to the sending MTA