Couldn't use variables in bpel code[JCAPS 511 einsight]

Hi,
In JCAPS 5.1.1 BPEL code, when i manually add
<variables>
<variable/>
</variables>
at time of saving it got wiped off or it is getting deleted automatically.
Please advice me how to add <variables> tag in BPEL code.
Regards
Venkatesh.S

I suspect you are looking for ways of adding equivalent of variables.
In eInsight, which is BPEL 1.0-compliant, you use the so-called Business Process Attributes. Right-click on the name of teh business process in the project explorer. Choose properties. Choose "business Process attributes" tab. Click "Add". name the attribute, choose the "simpletypes" namespace and choose the data type. Apply. Open the BP. You should have a "variable" of the chosen type showing up in the mapping tree when you select "show all".
Does this help?

Similar Messages

Can I use OLAP variable in ABAP Code of infoobject filter

I have 0FISCPER infoobject in filter section of info-package while loading data.
Below OLAP varaibles has below dynamic values that are being calculated at run time.
0P_PRFP2 - (Current fiscal period - 2)   ex: 2010010
0P_PRFP1 - (Current fiscal period - 1)   ex: 2010011
0FPER    -    (Current fiscal period )        ex: 2010012
I want to write ABAP CODE FOR using filter values from 0P_PRFP2 to 0FPER. (Last 3 fiscal periods - ex: 2010010 to 2010012).
how to use above standard OLAP variables in ABAP CODE to assign l_t_range (low or high).

try this using ABAP routine option (6)
DATA: curryear(4)           type N,
             currperiod(2)         type N,
             prevper1(2)           type N,
             prevyear1(4)         type N,
             prevper2(2)           type N,
             prevyear2(4)         type N,
             prevfiscperYr1(7)   type N,
             prevfiscperYr2(7)   type N,
             prevfiscper1(3)      type N,
             prevfiscper2(3)      type N,
             w_length1              type i,
             w_length2              type i.
curryear = SY-DATUM+0(4).
currperiod = SY-DATUM+4(2).
If currperiod EQ '01'.
    prevyear1 = curryear - 1.
    prevper1   = '12'.
    prevyear2 = curryear - 1.
    prevper2   = '11'.
elseif currperiod EQ '02'.
    prevyear1 = curryear.
    prevper1   = '01'.
    prevyear2 = curryear - 1.
    prevper2   = '12'.
else.
    prevyear1 = curryear.
    prevper1   =   currperiod - 1.
    prevyear2 = curryear.
    prevper2   = currperiod - 2.
endif.
w_length1 = STRLEN( prevper1 ).
If w_length1 = 1.
    concatenate '0' prevper1 into prevper1.
Endif.
w_length2 = STRLEN( prevper1 ).
If w_length2 = 1.
    concatenate '0' prevper2 into prevper2.
Endif.
concatenate '0' prevper1 into prevfiscper1.
concatenate '0' prevper2 into prevfiscper2.
concatenate prevyear1 prevfiscper1 into prevfiscperYr1.
concatenate prevyear2 prevfiscper2 into prevfiscperYr2.
l_t_range-low = prevfiscperYr2.
l_t_range-high = prevfiscperYr1.
* modify l_t_range index l_idx from l_t_range.
l_t_range-sign   = 'I'.
l_t_range-option = 'BT'.
modify l_t_range index l_idx.

How can we use java variable in javascript code on JSP page?

How can we use java variable in javascript code on JSP page?
Pls help

Think about it:
JSP/Java is executed on the Server and produces HTML+JavaScript.
Then that HTML+JavaScript is transfered to the client. The client now interpretes the HTML+JavaScript.
Obviously there's no way to access a Java variable directly from JavaScript.
What you can do, however, is write out some JavaScript that creates a JavaScript variable containing the value of your Java variable.

Standard for the use of session variable in webpart code.

Hi,
Why we should avoid using of session variables while writing code?
Is it not a standard?
Thanks,
Akhilesh Rao
Akhilesh Rao

On the face of it, Session is ideal for this, however this is SharePoint and the obvious isn't always the best.
You'd need to do the calculation about memory usage and number of concurrent users to ensure it really is a viable option in Production.
If it isn't viable, or wouldn't scale to possible future usage what would you do? Then you need to ask if it's really necessary to move between pages? If the user needs to move through a dialog for example, that could be hosted on a single page which might
have different controls or sections made visible as the user progressed through the use case.
Passing data between pages in SharePoint is a lot more difficult than it should be. Sometimes it's best to stay put, and certainly safer than using Session if you're really not sure if Session will stop your solution from scaling.
Always remember, SharePoint might be hosted on ASP.NET but the design considerations are significantly different than if this were a pure ASP.NET application.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

Using jsp variable in java code

Hey guys,
I need some help hope you guys can help me.
I've declared a variable "error" in a jsp. how do I access this variable in the java code whice resides in the same jsp page.
I know I can use java variable in jsp code using
<%= sVariable %>
where sVariable was declared in the java code. but how do I access a jsp variable in java code??
Thanks very much in advance

Thanks for the reply.
This is what I want to do.
I've declared a variable "error" using <c:catch var="error">I want to check the value of this variable and suppose if it contains XYZ (error variable will have a long string so I just want to check if it contains a specific value) I want to do step1 and if the variable of error is not XYZ I want to do step 2
Problem is I dont know how to check if error contains the XYZ in jsp thats why I thought java code would help here.
Can you guys suggest a better way to solve my problem.
Thanks again

How to read a variable within a VC code. I am using BADI based VC code.

How to read a variable within a VC code. I am using BADI based VC code.
Lets say I have a variable for a fiscal period that holds cumulative month.
If user enters 03/2014 in that variable, it will have month starting from Jan till March.
Within VC code I would like to read the last month which is
03/2014 and based on this month I would like to do some calculation on all the records using the last month.
Since VC code runs for one record at a time and there is no way I can store this value.
Is there a way to go about it....any suggestions would be of great help.
Thanks.

Any suggestions would be highly appreciated.
Thanks!

Using variables in Calc scripts and Business Rules

I am sure there have been previous discussions about this, but can somebody let me know the benefits of using variables in Calc scripts and BRs?
Thanks,
A

I have never used calc variables and after reading a study guide, which talked about them, I couldn't really understand the benefits.^^^I use variables all the time to make abstract difficult formulas. Below is an example.
/*     Declare variables     */
VAR varSalaryCosts ;
VAR varProdOHLabXXXX ;
VAR varXXXX ;
A whole bunch of code here along with very limited FIX statement and then...
"Salaried Labor"
     varSalaryCosts = "Salary Costs"->"No Department"->"No Category"->"Salaried" -
                         "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                         "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                         "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried" ;
     varProdOHLabXXXX = "Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"TTTT"->"Codes"->"Salaried" ;
     "Salaried Labor" = varSalaryCosts * ("Number of Employees"->"Salaried" / varProdOHLabXXXX) ;
)The last formula is how the formula was described to me by the business owner. I find it to be much easier to read than something like:
"Salaried Labor" = ("Salary Costs"->"No Department"->"No Category"->"Salaried" -
                         "Wage Bonus"->"No Department"->"No Category"->"Salaried" -
                         "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" -
                         "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried") *
                         ("Number of Employees"->"Salaried" /
                         ("Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" +
                         "Number of Employees"->"TTTT"->"Codes"->"Salaried")) ;I have used ARRAY in a really-cool-but-alas-not-invented-by-me calc script to do currency conversion in Planning better than Planning does currency conversion. (How's that for a run-on sentence?) It is one of the six blog posts I am working on and I will finish it soon, I hope. I am sort of in thrash mode right now. It does have its uses and I'll try to remember to update this thread when I'm done.
Regards,
Cameron Lackpour

How to COmpare two variable in BPEL

Hi ,
I have two compare two variable ( EIN field ) one from input variable of a BPEL process and other one the output variable of a invoke .
My requiremet is like this :
If the the value of both EIN field is same then I have to assign Name field of Invoke output parameter to Output variable of BPEL process .
If the value doesn't match then i have to assign ' No Data Exist ' expression to Output variable of BPEL process .
How can i do this .
Please help me regarding this as early as possible .

You can do this in a switch statement. Perform a comparision to check if the values are the same, if case is not important (because users will enter anything) wrap the code in a case expression, e.g. upper(user_date) = upper(file_data)
What version of SOA Suite and JDev are you using. Make sure that these versions are in sync.
cheers
James

Using Variable Substitution

Hi Im new to XI and Im testing a simple file to file scenario by using Variable Substitution method.
PFB the input payload of my scenario:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:INF94145_Emp_Input_MT xmlns:ns0="http://infosys.com/xi/projects/adidas/n2">
- <Employee>
- <Details>
<Name>A</Name>
<ID>1</ID>
<Designation>SE</Designation>
<Salary>123456</Salary>
<DOJ>24-02-2008</DOJ>
<Other />
- <Address>
<City>Asd</City>
<ZIP>505001</ZIP>
<Country>India</Country>
</Address>
</Details>
</Employee>
- <Employee>
- <Details>
<Name>B</Name>
<ID>2</ID>
<Designation>SE</Designation>
<Salary>123456</Salary>
<DOJ>24-02-2008</DOJ>
<Other />
- <Address>
<City>Asd</City>
<ZIP>505001</ZIP>
<Country>India</Country>
</Address>
</Details>
</Employee>
</ns0:INF94145_Emp_Input_MT>
I used the variable substitution feature of Receiver File adapter to get the Output file name as one of the Field value from payload(Employee name in this case).
Now my question is can I be able to get the output files based on employee names.i.e.,for two employee details I should get two out files and for n employee details I should get n output files.
Can anyone tell how the above scenario could be done.
Thanks for your help.
Regards,
Prajwal

Hi,
I have used multi mapping and I tested the same and is working fine when I test in TEST tab present in mapping.
My scenario is a file to file and also I used same fields in input and output DT(datatype) for understanding purpose.
My input data type is as follows:
- <ns1:INF94145_Emp_Input_MT xmlns:ns1="http://infosys.com/xi/projects/adidas/n2">
- <Employee>
- <Details>
<Name>A</Name>
<ID>1</ID>
<Designation>qw</Designation>
<Salary>122</Salary>
<DOJ>2-22-2222</DOJ>
<Other>asasa</Other>
- <Address>
<City>asdsada</City>
<ZIP>12</ZIP>
<Country>dsada</Country>
</Address>
</Details>
</Employee>
But when coming to END to END testing I'm getting an error in IE as follows:
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
Can anyone say what i have to do to overcome this problem.
Thanks and regards,
Prajwal

Problem with Multimapping using Variable Susbtitution

Hi,
I have done a Multi-Mapping where I have used variable substitution in the mapping
The problem I am facing is that when my target message generates multiple messages the files are creating successfully on the FTP server but if only a
single message generates on the target side then my message is successfully processed in IS but in adapter engine the message status is in "Waiting" state.
When i see the audit log i found the following details:
Time Stamp Status Description
2007-09-18 06:10:24 Success The message was successfully received by the messaging system. Profile: XI URL: https://dx1-60.ra.rockwell.com:56001/MessagingSystem/receive/AFW/XI
2007-09-18 06:10:24 Success Using connection AFW. Trying to put the message into the receive queue.
2007-09-18 06:10:24 Success Message successfully put into the queue.
2007-09-18 06:10:24 Success The message was successfully retrieved from the receive queue.
2007-09-18 06:10:24 Success The message status set to DLNG.
2007-09-18 06:10:24 Error Unable to find channel ID
2007-09-18 06:10:24 Error Delivery of the message to the application using connection AFW failed, due to: Couldn't find delivery channel for message: 46ee0b73-f266-3794-e100-000082974e17.
2007-09-18 06:10:24 Success The asynchronous message was successfully scheduled to be delivered at Tue Sep 18 06:15:24 GMT 2007.
2007-09-18 06:10:24 Success The message status set to WAIT.
2007-09-18 06:15:24 Success Retrying to deliver message to the application. Retry: 1
Iam using SP14
Can anyone help me to solve the above problem

DATA: l_tabname TYPE tabname .
DATA : gi_mara TYPE TABLE OF mara ,
gi_makt TYPE TABLE OF makt .
l_tabname = 'MARA' .
DATA : l_dref TYPE REF TO data.
FIELD-SYMBOLS: <li_itab> TYPE ANY TABLE.
CREATE DATA l_dref TYPE TABLE OF (l_tabname).
ASSIGN l_dref->* TO <li_itab> .
*Define another field symbol and asign it to right internal table
*here naming of internal table is important
FIELD-SYMBOLS : <fs_tab> TYPE ANY TABLE .
CONCATENATE 'GI_' l_tabname INTO l_tabname .
ASSIGN (l_tabname) TO <fs_tab>.
<fs_tab> = <li_itab> .

How can I use variable name as a prameter value in HOST Command ???

Hi All,
How can it possible to use variable value in parameter in HOST command ??
Following in my code:
host('rwclient server=reptest report=c:\cust_print.rdf p_1= s_sam_cust_id userid=wh1/wh1@dwh desformat=pdf desty=file desname=c:/temp/'||v_sam_cust_id||'.pdf');
Regards

Hello,
The Syntax of the builtin HOST is :
SyntaxPROCEDURE HOST
(system_command_string VARCHAR2);
PROCEDURE HOST
(system_command_string VARCHAR2,
screen_action NUMBER);
So , you can build the system_command_string as any VARCHAR2
Example are provided in online help :
http://www.oracle.com/webapps/online-help/forms/10g/topics/f1_help/builth_m/host.html?tp=true
Regards

ORA-04054 : using variable substitution for the database link name

Hi,
I need to use variable substitution for the database link name.
Here is my command :
declare
GET VARCHAR2(50);
begin
select OIA_GET_DESIGNATION into GET from INFODRI.OMA_IN_ARTICLES;
for rec in (select * from [email protected]_GET_DESIGNATION)
LOOP
dbms_output.put_line('TEN_CODE vaut : '||rec.ten_code);
END LOOP;
exception
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('ERREUR ORACLE DETECTEE : '||rec.OIR_CUR);
DBMS_OUTPUT.PUT_LINE('Message Erreur : '||SUBSTR(SQLERRM,1,245));
:crd := -1;
end;
When I run this programm, I receive the error :
ORA-04054: database link REC.OIA_GET_DESIGNATION does not exist
When I replace :
for rec in (select * from [email protected]_GET_DESIGNATION)
by :
for rec in (execute immediate 'select * from tensions@'||rec.OIA_GET_DESIGNATION)
I receive the error :
PLS-00103 : Encountered the symbol "IMMEDIATE" while parsing.
What can I do to resolv my problem ?
Regards,
Rachel

What is the name of the DB Link and the name of the object you are selecting
from?
I find it easier to create a view on the remote object then use that in selects.
e.g,
Link Name = MyLink
Object_name = Addr_Loc
create or replace VIEW Rem_Addr_Loc AS
select * from addr_loc@mylink;
In the code I then use the view
begin
for C_Rec in (select * from Rem_Addr_loc)
loop
dbms_output.put_line('Rec: '|| C_Rec.Col1);
end loop;
end;

INSERT statement in JSP using variables

People,
I am having problems inserting data from JSP into a MySQL database.
For example the following works perfectly fine:
String query = "INSERT INTO `test2` (`name`, `topic`, `message`) VALUES ('Jane Doe', 'Hi there', 'Example message')";
But, however the problems take place if I try to use variable values as parameters instead of pre-defined strings.
E.g. the following (among a 100 other ways I have tried by now) does not work):
String query = "INSERT INTO `test2` (`name`) VALUES (`" + userName +"`)";
stmt.executeUpdate(query);
This did not work either:
PreparedStatement PStmt = myConn.prepareStatement("insert into (`name`) values (?)");
PStmt.setString(1, new String("`" + userName + "`"));
PStmt.executeUpdate();
I have tried without parenthesis etc. but what I pretty much get every time is:
500 Servlet Exception
java.sql.SQLException: Column not found: Unknown column 'Jane' in 'field
list'
     at org.gjt.mm.mysql.MysqlIO.sendCommand(MysqlIO.java:508)
     at org.gjt.mm.mysql.MysqlIO.sqlQueryDirect(MysqlIO.java:561)
     at org.gjt.mm.mysql.MysqlIO.sqlQuery(MysqlIO.java:646)
     at org.gjt.mm.mysql.Connection.execSQL(Connection.java:973)
     at org.gjt.mm.mysql.Connection.execSQL(Connection.java:897)
     at org.gjt.mm.mysql.Statement.executeUpdate(Statement.java:230)
     at org.gjt.mm.mysql.jdbc2.Statement.executeUpdate(Statement.java:99)
     at sql3_jsp._jspService(/sql3.jsp:49)
     at com.caucho.jsp.JavaPage.service(JavaPage.java:87)
     at com.caucho.jsp.JavaPage.subservice(JavaPage.java:81)
     at com.caucho.jsp.Page.service(Page.java:474)
     at com.caucho.server.http.FilterChainPage.doFilter(FilterChainPage.java:166)
     at com.caucho.server.http.Invocation.service(Invocation.java:277)
     at com.caucho.server.http.CacheInvocation.service(CacheInvocation.java:129)
     at com.caucho.server.http.RunnerRequest.handleRequest(RunnerRequest.java:334)
     at com.caucho.server.http.RunnerRequest.handleConnection(RunnerRequest.java:266)
     at com.caucho.server.TcpConnection.run(TcpConnection.java:140)
     at java.lang.Thread.run(Thread.java:484)
I do not know much about SQL or JDBC but the material I have seen makes me believe
that I am pretty much doing the right thing.
What is the right way of doing this?
I would greatly appreciate any feedback.

Hi,
I think i know the problem.
Take a look on your String code :
"INSERT INTO `test2` (`name`, `topic`, `message`) VALUES ('Jane Doe', 'Hi there', 'Example message')";
it is not necessary to put QUOTE for the tablename and the fields.
my code work with :
String query = "INSERT INTO test2 VALUES( ' " + 123 + " ' ) ";
( if you inserting into all fields in your table ) OR
String query = "INSERT INTO test2 ( abc ) VALUES( ' " + 123+ " ' ) ";
( if you need to select certain fields ).
or you can try to refer to :
http://www.w3schools.com/sql/sql_insert.asp
hope this help.

Using Variables in SQL*PLUS

Hi,
I hope to get any insight possible. I am using External tables and the Default directory is set. Now the process is that I get an automatic downloads of files placed in that directory. They are all to have the same naming system.
Test_June_2006 or Test_July_2006 and so on. Basically the month will be one behind, so Since it is August, I am looking for Test_July_2006.
I was able to set the "location" parameter to accept a variable, but i am having some trouble with set the value to that variable.
My code:
define month = EXTRACT(MONTH FROM CURRENT_DATE)-1||'_'||EXTRACT(YEAR FROM CURRENT_DATE).txt
variable month varchar2(100)
drop table ext_Test;
create table ext_Test
(field1      varchar2(25),
field2      varchar2(10),
field3     varchar2(10),
field4 varchar2(15),
field5 Float,
field6     Float,
field7 Float
organization external
( default directory sourcedata
access parameters
( records delimited by newline
SKIP 1
fields terminated by ','
OPTIONALLY ENCLOSED BY '"'
missing field values are null
location ('Test_&month')
reject limit 0;
When I tried "location ('&month') and setting month to July, it worked fine, but now that I am adding functions, it is not setting the variable properly.
Any help would be appreciated. Thank you.

You cannot use & substitution variable to replace file name dynamically.
You will have to use the ALTER TABLE command at run time to alter the location of the file to what you want before you start processing.
SQL> create table ext_Test
2 (field1 varchar2(25),
3 field2 varchar2(10),
4 field3 varchar2(10),
5 field4 varchar2(15),
6 field5 Float,
7 field6 Float,
8 field7 Float
9 )
10 organization external
11 ( default directory sourcedata
12 access parameters
13 ( records delimited by newline
14 SKIP 1
15 fields terminated by ','
16 OPTIONALLY ENCLOSED BY '"'
17 missing field values are null
18 )
19 location ('Test_&month')
20 )
21 reject limit 0;
Enter value for month: july
old 19: location ('Test_&month')
new 19: location ('Test_july')
Table created.
SQL> alter table ext_test location('Test_August') ;
Table altered.
SQL>

Using variables in a button function

I am new to AS3 and building a simple flash banner. There
will be four movie clips consisting of just one word each (in the
sample below I'm just using rectangle for now). When moused over
each word will show a rectangle with a message in it, like a large
tool tip. I have a rudimentary version working fine, see code
below.
Question 1: Is there a way to just write on function which
will work with all four buttons changing the message, say using
variables like AS2?
Question 2: Does the code below look relatively efficient?
I'm sure there are better ways to write it.
Here's a link to the rudimentary version,
http://www.rivergraphics.net/tests/button3.html,
that should give you an idea of what I'm trying to do.
Thanks.

Simply use the information that's passed along with the event
to figure out which item raised the event. Then you can easily call
the other items that correspond to the button raising the event.
TS

Couldn't use variables in bpel code[JCAPS 511 einsight]

Similar Messages

Maybe you are looking for