Coverage for calls/texts from (DY3 3RS) has been awful in 2015.

My coverage from DY3 3RS since the end of 2014 and all of 2015 has been non existant! Is there a problem in this area?I've been with Orange/EE since 1992 and my coverage historically was great.I hoped Wifi Calling would help, sadly it doesnt so im resigning myself to the fact i need to switch providers on my next contract review :-(. Any suggestions

Hi
There was some changes but these were in the back end of 2013 when some duplicate masts were turned off. Everything has been upgraded since then.
We don't have a contact email address for tech support.
The best thing to do is give us a call on 150 and speak to tech support so this can be looked into for you.
If you go to Settings > General > About > Carrier > This should be 19.1 or above.
If you turn 4G off in Settings > Mobile/Carrier > Voice & Data do you see an improvement?
Thanks.

Similar Messages

How to block calls & texts from one telephone number

How to block calls & texts from one telephone number

Call number blocking is done only by the carrier. Some carriers allow users to input numbers to be blocked on a website.
Verizon allows users to list up to five numbers to be blocked for free for 90 days by entering them in the users My Verizon site. I've found that 90 days has been sufficient to discourage most nuisance calls. But Verizon also provides a service ( for a fee) that will permanently block a number.
So contact your carrier to see what they offer.

Any program for calling bapi from ABAP step by step

any program for calling bapi from ABAP step by step
points will be rewarded,
thank you,
Jagrut BharatKumar Shukla

Hi Jagrut,
BAPI stands for Business API(Application Program Interface).
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
ex BAPI:
API_SALESORDER_CREATEFROMDAT1
BAPI_SALESORDER_CREATEFROMDAT2
You can get good help form the following links,
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://sap-img.com/bapi.htm
EG::
Here is the step by step procedure for creating BAPIs.
There are 5 different steps in BAPI.
- Create BAPI Structure
- Create BAPI Function Module or API Method.
- Create BAPI object
- Release BAPI Function Module.
- Release BAPI object.
Step1. Creating BAPI Structure:
- Go to <SE11>.
- Select Data Type & Enter a name.
- Click on Create.
- Note: Always BAPI should be in a development class with request number (Not Local Object).
- Select Structure & hit ENTER.
- Enter the fields from your database. Make sure that the first field is the Primary Key Field.
- Then SAVE & ACTIVATE.
Step 2. Creating BAPI module:
- Enter TR.CODE <SE37>.
- Before entering any thing, from the present screen that you are in, select the menu
Goto -> Function Groups -> Create Group.
Enter a name (Note: This name Must start with ZBAPI)
Let this screen be as it is and open another window and there, enter TR.CODE <SE80).
Click on the Third ICON that says Inactive Objects.
Select the group that you just created and click on Activate.
Notice that the group you created will disappear from the list of inactive objects.
- Go back to ><SE37> screen and enter a name and hit <ENTER>. Then enter the group name that you just created and activated.
NOTE: When you release a function module the respective group will be attached to that particular application. It cannot be used for any other application. NEVER include an already existing group that is attached to another module.
Now click on the first Tab that says [ATTRIBUTES] and select the radio button that says remote-enabled module since we will be accessing this from any external system.
Then click on the second tab that says [IMPORT].
Enter a PARAMETER NAME, TYPE and the structure you created in the first step. Also select the check box Pa. All remotely enabled functional modules MUST be Pa enabled, where Pa means Passed by Value and if you dont select Pa, then that means it will be passed by reference..
Then click on tab that says [EXPORT].
Enter the following as is in the first three fields
RETURN TYPE BAPIRETURN (These 3 field values are always same)
Here also select Pa meaning Pass by value.
Note: BAPIRETURN contains structure with message fields.
Then SAVE and ACTIVATE.
Step 3. Creating BAPI object:
- Enter Tr.Code <SWO1> (Note. It is letter O and not Zero).
- Enter a name and then click on create. Enter details.
NOTE: Make sure that that Object Type and Program name are SAME.
- Enter Application M, if you are using standard table Mara. If you are using your own database then select Z at the bottom.
- Then hit <ENTER>.
- Now we have to add Methods. High light METHODS and then select the following from the menu:
Goto Utilities -> API Methods -> Add Methods.
- Enter function Module name and hit <ENTER>.
- Select the second FORWARD ARROW button (>)to go to next step.
- Check if every thing looks ok and again click on FORWARD ARROW button (>).
- Then select YES and click on <SAVE>.
- Now on a different screen goto TR.CODE <SE37>. Enter Function Module name and select from the top menu Function Module -> Release -> Release.
- Goback to TR.CODE <SWO1>.
Here select the menu combination shown below in the same order.
- Edit -> Change Release Status -> Object Type Component -> To Implemented.
- Edit -> Change Release Status -> Object Type Component -> To Released.
- Edit -> Change Release Status -> Object Type -> To Implemented.
- Edit -> Change Release Status -> Object Type -> To Released.
- Then click on <SAVE>.
- Then click on Generate Button (4th button from left hand side looks like spinning wheel).
- Then Click on the button that says PROGRAM to see the source code.
To check if this is present in work flow goto TR.CODE <BAPI>.
Here it shows business object repository.
- First click on the middle button and then select ALL and hit ENTER.
- Goto tab [ALPHABETICAL] and look for the object that you created. This shows that the BAPI object has been created successfully
Reward pts if found usefull :)
regards
Sathish

Need 2x click or confirmation screen for calling / texting

This is a call out to Apple to implement double click for calling / texting - or at least offer a confirmation screen when dialing from screens like 'favorites' or 'recents'
I can not tell you how many times I have initiated calls erroneously when attempting to scroll (or I've called the wrong number because I didn't hit the correct contact on first touch), and how many times I have inadvertently hit send on text messages before I was ready, simply because I was trying to type 'o', 'u' or 'p', or my finger just touched the screen in the wrong place.
The phone is all screen and it's really difficult not to touch it. The issue is that just touching the screen often initiates an unintended call or other action, especially if trying to operate the phone with one hand or while in motion.
Please chime in here to let Apple know that this is an issue that needs to be addressed. I know many of you are having the same usability issues. Let Apple know by responding to this post with your stories of frustration.
Thanks,

If apple would add that feature there would be allot more users requesting it taken off than the users that would actualy want it so I am sure that they would not want to add features just for a select few customers
There are to many taps allready up the point when you place a call, why add more
There is an easy fix for your problem: be carefull when you tap on your screen

Can anyone give me step by step for calling FM from one SAP to another SAP

can anyone give me step by step for calling FM from one SAP to another SAP
points will be rewarded,
thank you,
Regards,
Jagrut BharatKumar Shukla

*& Report RFC_FOR_CUSTOMER_LIST
*& RFC to a Fn. module from another system which implements BAPI
REPORT rfc_for_customer_list.
DATA:
fl_status TYPE i.
DATA:
fs_message TYPE bapiret2.
DATA:
BEGIN OF fs_customers,
    id   TYPE s_customer,
    name TYPE s_custname,
END OF fs_customers.
DATA:
t_customers LIKE
     STANDARD TABLE
           OF fs_customers.
CALL FUNCTION 'Z_BAPI_GET_CUSTOMER_LIST' DESTINATION 'R3N'
IMPORTING
    return = fs_message
TABLES
    customerlist = t_customers.
IF sy-subrc EQ 0.
fl_status = 1.
LOOP AT t_customers INTO fs_customers.
    WRITE:
      /10 fs_customers-id,
       30 fs_customers-name.
    AT LAST.
      WRITE:
        /,/5 'No of customers in R3N = ', sy-tabix.
    ENDAT.
ENDLOOP.
ELSE.
MESSAGE 'RFC failed' TYPE 'S'.
EXIT.
ENDIF.
                       TOP-OF-PAGE EVENT                            *
TOP-OF-PAGE.
IF fl_status NE 0.
    WRITE:
      /12 'ID'   COLOR 6,
       32 'NAME' COLOR 6.
    SKIP.
ENDIF.
This is one small example...
Regards,
Pavan

My computer is accepting calls/texts from my phone. How do I stop this?

My computer is accepting calls/texts from my phone. How do I turn off this feature?

Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
On your Mac, open the FaceTime app and go to FaceTime > Preferences. Click Settings and deselect the iPhone Cellular Calls option.
You can Turn off SMS forwarding form your iPhone in Settings->Messages->Text Message Forwarding And turn off the devices you do not want to be receiving your SMS texts.

SQL TO search for a text from one of the table in a scheme(user)

Hi folks
Is there any way to serch for a text from a table in a schema(user) where we dont know from which table that text belongs to .
If yes please post me ..
Thanks

Try this
     SQL> var val varchar2(5)
     SQL> exec :val := 'as'
     PL/SQL procedure successfully completed.
     SQL> select distinct substr (:val, 1, 11) "Searchword",
                     substr (table_name, 1, 14) "Table",
                     substr (t.column_value.getstringval (), 1, 50) "Column/Value"
                from cols,
                     table
                        (xmlsequence
                            (dbms_xmlgen.getxmltype ('select ' || column_name
                                                     || ' from ' || table_name
                                                     || ' where upper('
                                                     || column_name
                                                     || ') like upper(''%' || :val
                                                     || '%'')'
                                                    ).extract ('ROWSET/ROW/*')
                        ) t
     --        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
            order by "Table"
     Regards
Singh

Getting error while calling this BAPI:Field MATNR has been transferred inco

Hi,
I have a rquirement to upload material master data into sap for Plant 1251.(For plant 1251 we need to upload both Basi veiw and Extended View).
I am getting the following error while calling this BAPI.Field MATNR has been transferred inconsistently or is blank
the errror is :Field MATNR has been transferred inconsistently or is blank.
I have written the below logic in the program to upload material master data into SAP.
Please help me out to resolve this issue.
Thanks in advance.
Program logic which i have wriiten in the program is
LOOP AT it_rpt.
 CLEAR lwa_return.
 v_tabix = sy-tabix.
 IF ( it_rpt-werks EQ p_werks AND
 it_rpt-matnr IS INITIAL ).
retrieve internal number
 PERFORM get_internal_number USING lc_mtart
 lc_mbrsh
 CHANGING it_rpt-matnr.
 ENDIF.
 IF NOT it_rpt-matnr IS INITIAL.
 PERFORM convert_field_input CHANGING it_rpt-matnr.
 ENDIF.
Header data
 CLEAR lwa_headdata.
 lwa_headdata-material = it_rpt-matnr.
 lwa_headdata-ind_sector = lc_mbrsh.
 lwa_headdata-matl_type = lc_mtart.
 lwa_headdata-basic_view = 'X'.
 IF NOT it_rpt-vkorg IS INITIAL.
 lwa_headdata-sales_view = 'X'.
 ENDIF.
 lwa_headdata-purchase_view = 'X'.
 lwa_headdata-mrp_view = 'X'.
 lwa_headdata-storage_view = 'X'.
 lwa_headdata-forecast_view = 'X'.
 lwa_headdata-work_sched_view = 'X'.
 lwa_headdata-account_view = 'X'.
 lwa_headdata-cost_view = 'X'.
*Client data
 CLEAR: lwa_clientdata, lwa_clientdatax.
 IF it_rpt-werks EQ c_1251.
 lwa_clientdata-matl_group = it_rpt-matkl.
 lwa_clientdata-old_mat_no = it_rpt-bismt.
 lwa_clientdata-base_uom = it_rpt-meins.
 lwa_clientdata-manu_mat = it_rpt-mfrpn.
 lwa_clientdata-mfr_no = it_rpt-mfrnr.
 ENDIF.
 lwa_clientdata-division = it_rpt-spart.
 lwa_clientdata-unit_of_wt = lc_gewei.
 lwa_clientdata-trans_grp = lc_tragr.
 IF it_rpt-werks EQ c_1251.
 lwa_clientdatax-matl_group = 'X'.
 lwa_clientdatax-old_mat_no = 'X'.
 lwa_clientdatax-base_uom = 'X'.
 lwa_clientdatax-manu_mat = 'X'.
 lwa_clientdatax-mfr_no = 'X'.
 ENDIF.
 lwa_clientdatax-unit_of_wt = 'X'.
 lwa_clientdatax-trans_grp = 'X'.
 lwa_clientdatax-division = 'X'.
Material Description
 IF it_rpt-werks EQ c_1251.
 lt_matdesc-langu = sy-langu.
 lt_matdesc-matl_desc = it_rpt-maktx.
 APPEND lt_matdesc.
 ENDIF.
*Plant data
 CLEAR lwa_plantdata.
 lwa_plantdata-plant = it_rpt-werks.
 lwa_plantdata-availcheck = lc_mtvfp.
 lwa_plantdata-mrp_type = lc_dismm.
 lwa_plantdata-mrp_group = lc_disgr.
 lwa_plantdata-auto_p_ord = 'X'.
 lwa_plantdata-proc_type = 'F'.
 IF it_rpt-werks EQ c_1251.
 it_rpt-prctr = lc_prctr. "1252
 ELSEIF it_rpt-werks EQ c_1261.
 it_rpt-prctr = lc_prctr1. "1262
 ENDIF.
 lwa_plantdata-profit_ctr = it_rpt-prctr.
 lwa_plantdata-period_ind = lc_perkz.
 lwa_plantdata-max_stock = it_rpt-stawn.
 lwa_plantdata-countryori = it_rpt-herkl.
 lwa_plantdata-sloc_exprc = it_rpt-lgfsb.
 CLEAR lwa_plantdatax.
 lwa_plantdatax-plant = it_rpt-werks.
 lwa_plantdatax-availcheck = 'X'.
 lwa_plantdatax-mrp_type = 'X'.
 lwa_plantdatax-mrp_group = 'X'.
 lwa_plantdatax-auto_p_ord = 'X'.
 lwa_plantdatax-proc_type = 'X'.
 lwa_plantdatax-profit_ctr = 'X'.
 lwa_plantdata-period_ind = 'X'.
 lwa_plantdatax-max_stock = 'X'.
 lwa_plantdatax-countryori = 'X'.
 lwa_plantdatax-sloc_exprc = 'X'.
*Valuation data
 CLEAR lwa_valuationdata.
 lwa_valuationdata-val_area = it_rpt-werks.
 lwa_valuationdata-price_ctrl = lc_vprsv.
 lwa_valuationdata-price_unit = lc_peinh.
 lwa_valuationdata-val_class = it_rpt-bklas.
 CLEAR lwa_valuationdatax.
 lwa_valuationdatax-val_area = it_rpt-werks.
 lwa_valuationdatax-price_ctrl = 'X'.
 lwa_valuationdatax-price_unit = 'X'.
 lwa_valuationdatax-val_class = 'X'.
*Storage location
 CLEAR lwa_storagelocation.
 lwa_storagelocation-plant = it_rpt-werks.
 lwa_storagelocation-stge_loc = it_rpt-lgort.
 CLEAR lwa_storagelocationx.
 lwa_storagelocationx-plant = it_rpt-werks.
 lwa_storagelocationx-stge_loc = it_rpt-lgort.
*Tax Classifications
 IF it_rpt-werks EQ c_1251.
 it_rpt-tatyp = lc_tatyp. "u2018MWSTu2019
 ELSEIF it_rpt-werks EQ c_1261.
 it_rpt-tatyp = lc_tatyp1. "u2018UTXJu2019
 ENDIF.
 lt_taxclass-tax_type_1 = it_rpt-tatyp.
 lt_taxclass-taxclass_1 = lc_taxkm.
 lt_taxclass-tax_ind = lc_taxim.
 APPEND lt_taxclass.
*Sales data
 CLEAR: lwa_salesdata, lwa_salesdatax.
 IF it_rpt-werks EQ c_1251.
 it_rpt-vkorg = lc_vkorg.
 ELSEIF it_rpt-werks EQ c_1261.
 it_rpt-vkorg = lc_vkorg1.
 ENDIF.
 lwa_salesdata-sales_org = it_rpt-vkorg.
 lwa_salesdata-distr_chan = lc_vtweg.
 lwa_salesdata-cash_disc = lc_sktof.
 lwa_salesdata-item_cat = lc_mtpos.
 lwa_salesdatax-sales_org = it_rpt-vkorg.
 lwa_salesdatax-distr_chan = lc_vtweg.
 lwa_salesdatax-cash_disc = 'X'.
 lwa_salesdatax-item_cat = 'X'.
*Forecast parameters
 CLEAR: lwa_forecast, lwa_forecastx.
 lwa_forecast-plant = it_rpt-werks.
 lwa_forecast-fore_model = lc_prmod.
 lwa_forecast-fore_pds = lc_anzpr.
 lwa_forecast-hist_vals = lc_peran.
 lwa_forecastx-plant = it_rpt-werks.
 lwa_forecastx-fore_model = 'X'.
 lwa_forecastx-fore_pds = 'X'.
 lwa_forecastx-hist_vals = 'X'.
Purchasing long text
 IF it_rpt-werks EQ c_1251.
 IF it_rpt-tdline1 <> ' '.
 lv_tdobject = 'MATERIAL'.
 lv_tdid = 'BEST'.
 lv_tdname = it_rpt-matnr.
 PERFORM fill_longtext TABLES lt_longtext
 USING lv_tdobject
 lv_tdname
 lv_tdid
 sy-langu
 it_rpt-tdline1.
 ENDIF.
Basic long text
 IF it_rpt-tdline2 <> ' '.
 lv_tdobject = 'MATERIAL'.
 lv_tdid = 'GRUN'.
 lv_tdname = it_rpt-matnr.
 PERFORM fill_longtext TABLES lt_longtext
 USING lv_tdobject
 lv_tdname
 lv_tdid
 sy-langu
 it_rpt-tdline2.
 ENDIF.
*Units of measure
 CLEAR : lt_uom,lt_uomx.
 lt_uom-alt_unit = it_rpt-meins.
 lt_uom-alt_unit_iso = it_rpt-meins.
 lt_uom-unit_of_wt = it_rpt-gewei.
 APPEND lt_uom.
 lt_uomx-alt_unit = it_rpt-meins.
 lt_uomx-alt_unit_iso = it_rpt-meins.
 lt_uomx-unit_of_wt = 'X'.
 APPEND lt_uomx.
 ENDIF.
 CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
 EXPORTING
 headdata = lwa_headdata
 clientdata = lwa_clientdata
 clientdatax = lwa_clientdatax
 plantdata = lwa_plantdata
 plantdatax = lwa_plantdatax
 forecastparameters = lwa_forecast
 forecastparametersx = lwa_forecastx
 storagelocationdata = lwa_storagelocation
 storagelocationdatax = lwa_storagelocationx
 valuationdata = lwa_valuationdata
 valuationdatax = lwa_valuationdatax
 salesdata = lwa_salesdata
 salesdatax = lwa_salesdatax
 IMPORTING
 return = lwa_return
 TABLES
 materialdescription = lt_matdesc
 unitsofmeasure = lt_uom
 unitsofmeasurex = lt_uomx
 materiallongtext = lt_longtext
 taxclassifications = lt_taxclass
 returnmessages = it_messages.
Regards,
Reddy

Can you check with below code .
CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
 EXPORTING
 INPUT = it_rpt-matnr
IMPORTING
 OUTPUT = it_rpt-matnr
 EXCEPTIONS
 LENGTH_ERROR = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Move it_rpt-matnr to lwa_headdata-material .
Regard's
Smruti

Hi can anyone help me im using my iphone to make a call to a number that has been changed two days ago but it automatically says 'called failed' why? please help!

hi can anyone help me im using my iphone to make a call to a number that has been changed two days ago but it automatically says 'called failed' why? please help!

Here's a nifty agorithm to fill an array of primes, using a forever loop with a labeled continue statement, from Horton's Beginining Java:public class MorePrimes
public static void main(String[] args)
 long[] primes = new long[20]; // Array to store primes
 primes[0] = 2; // Seed the first prime
 primes[1] = 3; // and the second
 int count = 2; // Count of primes found - up to now,
 // which is also the array index
 long number = 5; // Next integer to be tested
 outer:
 for( ; count < primes.length; number += 2)
 // The maximum divisor we need to try is square root of number
 long limit = (long)Math.ceil(Math.sqrt((double)number));
 // Divide by all the primes we have up to limit
 for(int i = 1; i < count && primes[i] <= limit; i++)
 if(number%primes[i] == 0) // Is it an exact divisor?
 continue outer; // yes, try the next number
 primes[count++] = number; // We got one!
 for(int i=0; i < primes.length; i++)
 System.out.println(primes); // Output all the primes

For about the past week, Facebook has been taking forever to load (or just not) on my mac (OSX 10.5.8; Safari 5.0.6). Other sites are fine. I routinely empty the cache, clear history, cookies, etc. each time I shut down. Suggestions?

For about the past week, Facebook has been taking forever to load (or just doesn't) on my mac (OSX 10.5.8; Safari 5.0.6). Other sites are fine. I routinely empty the cache, clear history, cookies, etc. each time I shut down. Suggestions?

I don't use Facebook, but I can say that clearing the cache every time you shut down is excessive - unless you're sure the cache is corrupt you should leave it alone. It exists to speed up your browsing experience by loading frequently requested items from your drive rather than downloading them fresh from the internet each time. So, I would say stop clearing your cache and see what happens.
As for clearing cookies: I'm not sure what method you currently use, but I would recommend you download and install CCleaner. It's free, and allows you to build up a list of cookies that you want to clear and those you want to keep, before deleting them.
Both of these may help speed things up by reducing the amount of work Safari has to perform whilst browsing. Regardless, I'd say that, unless there's a reason you've not mentioned for performing the "purging" that you do, making these two changes should see improvements in general web browsing if not specifically when loading Facebook.

My MacBookPro is less than 3 months old and for the last few days, it has been itslow to load anything, especially web pages. I get the rainbow swirl when loading or reloading. I guess I am spoiled. Up until now it was lightening fast!

My MacBookPro is less than 3 months old and, for the last few days, it has been loading so slowly, mainly with webpages. I have gotten the swirling rainbow "thinking" icon more in the last days than I have since I bought it. I know I'm spoiled and expect it to be faster than lightening (which it has been) but I am worried that I may have been compromised in some way, or, is there anything I can do as administrator to clear out some "junk"?

Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
Given that your MacBook Pro is so new, you should certainly contact AppleCare and take advantage of the free telephone support included in its purchase price.
Until then, if you are motivated to investigate this yourself consider the following:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or "failed".
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

I am backing up to my time capsule for the first time. It has been stuck on 348mb of 20.1 gb for days. Is this normal or is the machine not functioning correctly?

That seems to be OK via WLAN!
It ist better to do the first backup via LAN-cable.

For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. Help.

For a while now my computer has been saying " Start up disk is nearly full", however I don't have a lot of stuff saved on the computer I moved a lot to a flash drive, and all the other stuff are songs and recently saved essays for school. I have and frequently empty my trash can. I have researched this before and i see a lot of things that say get a external hard drive, but before I go and purchase one I want to make sure there is no other, simpler way, to solve this problem. Help Please.

You need an external drive so you can free up disk space. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing space on your Mac OS X startup disk

I purchased the license of photoshop & lightroom for 1 year I guess it has been double paid. I would like to cancel the 1 of double payment. Where can i find the license?

I purchased the license of photoshop & lightroom for 1 year I guess it has been double paid. I would like to cancel the 1 of double payment. Where can i find the license?

You are likely going to have to contact Adobe Support directly by chat or phone when they are available.
Manage your membership and payments | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting -creative-cloud.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

I took out a trial of Fireworks CS6, but for some reason a .dll file has been deleted off my computer. How can I download the program again?

I took out a trial of Fireworks CS6, but for some reason a .dll file has been deleted off my computer. How can I download the program again?

Hello
you could have a look there Download CS6 products
Hans-Günter

Coverage for calls/texts from (DY3 3RS) has been awful in 2015.

Similar Messages

Maybe you are looking for