CProjects Resource staffing problem

Hi Everybody,
                      Right now we are facing a problem while staffing a resource for a role created. I am getting a error saying "Enter a valid business partner" and "Message was caused by reference object 'Business Partner Link'". What exactly i need to do get rid of the problem. I was trying to create a new resource there in cProjects, even that create resouce area become disabled. What is the solution for this ??
Thanks,
Rajesh.

Hi Sunil,
             I have created the Business Partner in transaction code BP. After that i was trying to add that resource in staffing. Previously i created the candidate directly in cProjects UI instead of creating a Business Partner in transaction BP. At that time i was able to staff the resource, but afterwards that create candidate is also not working. One more thing after creating a business partner in BP, how to link the business partner to a User and Employee. I am not able to get the link in ECC system. But while creating the candidate i have the option of linking the BP with user as well. I am totally confused with all these things.
           And one more after giving the Business Partner number in the staffing search i am able to see the resource name next to the text box. But while assigning i am getting error message saying "Enter a valid Business Partner". I dont understand what is "valid".
Thanks,
Rajesh.

Similar Messages

  • CProjects - Resources Staffing Mass update with distribution

    We are doing staffing for resources with distribution in cprojects
    There are certain support projects where the Manager has to
    - extend the End dates of resources
    - Add distribution hours for the extended period (8 hours each day)
    One of these projects has 150 resources allocated
    So, it is a huge task to update each resource and the distribution hours manually.
    Is there any easier way to do this mass update
    Any standard routine or an FM available to do these steps, or can we write a custom routine to do this
    Any help, document is welcome
    rohit

    Dear Rohit,
    What exactly is 'Distribution Hours'? If it is the 'Required Capacity' field then you can change it through the FM. The required field for it is in the structure IS_STAFFINGLINK in the FM.
    Please check and confirm.
    Regards,
    Debaranjan Hazarika.

  • Initial View Cprojects Resource

    Hi,
    I see you can define several initial views depending on the rol, these are Projects, tasks, evaluations, templates....We have a rol with all the initialviews selected but 'resources initial view' does not appear.
    Does anyone knows why Initial view RESOURCE is not showed in cProjects like a initial tab?
    Thanks a lot,
    Sara

    Hi,
    if you refer to the "Initial Views" customizing, the "Resources" intial view is not related to
    cProjects resource management but only to the case you have RPA / WFMCORE installed
    and active.
    Kind regards,
       Florian

  • CProjects - RPA - staffing resource within 1 Org. Unit only

    Hi Experts,
    We're implementing cProjects with combination planning - staffing with cProjects and RPA (WFM).
    In project role type's setting, I choose: 'Staffed by: Resource Manager via Responsible Organization' with expectation that the resp. Staffing Manager within the stated Organization only able to staff resource within the same Organization.
    (Staffing Manager from Org. Unit 1001 only able to staff Resource within Organization Unit 1001).
    But, apparently it does not work like that. The Staffing Manager can staff all resources from all Org. Unit - as long as the resources have Service Arrangement.
    Any one can help me pointing where I go wrong with the customization?
    thank you & regards
    Bernadette

    Hi,
    When you search the resources, put the Org unit as the search criterion along with that of Qualification. This will yield only those resources who are from the specified Org unit.
    Regards,
    Sujay G

  • CProjects Resource Management fails

    We have a resource-management requirement which cProjects does not seem to satisfy. Your inputs...
    In our business scenario:
    - A Project Role may have a number of tasks to perform.
    - The same role may work on the same task across a number of time periods - say 5 days in January, another 3 days in Feb, 6 days in Apr. and so on.
    How can we ensure that the resource is booked only for those dates when he is assigned to the tasks?
    Staffing drives the resource availability, not the resource-task assignment. We can only staff a resource for an extended period of time, say Jan to Apr, for say, 14 days. But this does not help in our case because this only determines floating booking (14 days across 4 months), not the fixed booking for the days when he is actually assigned to the task(s).
    Copy Staffing does not help our case because, when we use this, the system copies the entire set of tasks already assigned to the resource (including the ones which he need work more than once)
    Nor does the system allow to staff the same role with the same resource more than once (except by "Copy Staffing", which does not solve the case).
    Is there any way we can break the deadlock?

    Hi.
    It is possible to split the role-task assignment into multiple rows with different start- and finnish dates  in the "Tasks Assigned to Selected Project Role Screen"
    Not so nice to maintain but it could perhaps be way forward?
    Regards / Anders
    Ps.
    By doing this you will also get the cost planning split according to the dates used.

  • Resource Staffing to a Project Role - Few queries :)

    Hi,
    There is a Newly created project role. Now the role needs to be assigned with the project task and also a resource needs to be staffed to the Project role.
    The role creation, task assignment are going good as per the defined processes. But I am finding difficulty to staff the resources to the role. On searching the resources (please note I have not mentioned any criteria in qualification) I am getting a list of resources but on staffing them neither of them is having the availability.
    My questions are..
    1) Are there any validity dates (for staffing) for the resources which are defined as the Busienss Partner in the BP T Code.
    2) On creataing a new Buseinss Partner in the BP and searching the same while staffing it does not show it. (Guess it can have some batch-job for updates as per requireement). Please suggest my guess is right or not.
    3) Do we have any functionality in cProjects wherein based on role requirement (with its availability dates) we can explore the number of resources which can be staffed with their availability dates. (I guess it is similar to the qualification criteria match functionality, but please note I have not used the qualification in my test case here).
    Please suggest. Full points for the correct and useful answer.
    Regards,
    Nishit

    Hi Nishit,
    1. I dont think there is any validity period explicity defined for BPs. The Business Partners can be staffed if they are not 'blocked'.
    2. Ensure that you create BPs with Employee role.There is no batch job update required if you have created BPs in the same system.
    3. Yes. This is possible. Check out the Resource Search Functionality in cProjects. Availability can be set as a desired search criteria there. You can maintain the BP availability in the t-code RPM_EMPDATA.
    Regards,
    Vivek

  • Remote Resources: "A problem with the system proxy caused the connection to fail: End of file"

    Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
    I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
    I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
    The relevant log is the following:
    [2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||ZWaveUtil
    remote.workingdirectory 
    remote.name ZWave Adapter Utility
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 200.5.68.10
      proxyPort = 8080
      sessionId = -1
    [2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
    [2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
    [2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    [2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
    ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
    RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
    [2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
    [2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
    RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    [2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
        User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------

    My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
    [2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username Administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=Administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 16:58:13] RDP (0): Not using any proxy
    [2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
    RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
    RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
    [2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
    Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
    Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
    find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
    [2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
    [2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
    label 
    hostname DIAZSERVER
    port 3389
    loadbalanceinfo 
    ui.swapmousebutton false
    remote.program ||chrome
    remote.workingdirectory 
    remote.name Google Chrome
    remote.args 
    rail true
    soundmode 0
    connect_to_console false
    redirectsdcard true
    performance_flags 134
    arc.sessionid 0
    anonymous_username 
    authentication_level 2
    use_redirection_server_name false
    username administrator
    gateway [
      host = DIAZSERVER
      port = 443
      bypass = false
    connect info[
      hostnames = [localhost]
      gatewayHost = DIAZSERVER
      gatewayPort = 443
      routingToken = Cookie: mstshash=administrator
      redirectionGUID = 
      proxyHost = 
      proxyPort = 0
      sessionId = -1
    [2014-Jan-14 17:09:27] RDP (0): Not using any proxy
    [2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    AsioEndpointContext (0): startup(): starting up down context
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
    RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
    RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    [2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
    [2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    AsioEndpointContext (0): shutdown(): shutting down context
    AsioEndpointContext (0): shutdown(): context shut down
    [2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
    I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be.

  • Arabic resource file problem

    i use jdeveloper 10.1.3 and windows xp
    i developed an hr application
    no i want my application to support both english and arabic language
    so i used windows notepad to write my resource file in arabic and english
    with english it worked good no problems
    but when i tried to save the arabic resource file on notepad
    i could not save it in ANSI format
    so i tried to save the file in a unicode or utf-8 format
    the problem is that when i try to a resource file in a format either that ANSI
    i does not work except with ANSI FORMAT file with arabic or english
    waiting for reply

    I think that the solution is to use Unicode utf-8
    add this line in the header of every page that content arabic word
    <%@ page contentType="text/html; charset=utf-8" %>
    and in the ResourceBundle file write in arabic , you will see after compilation that what you had write in arabic became in Unicode.
    exemple :
    before compilation
    Form.label.sndName= &#1575;&#1604;&#1573;&#1587;&#1605;
    after comilation
    Form.label.sndName= \u0627\u0644\u0625\u0633\u0645
    and remember that i sad that you must add
    <%@ page contentType="text/html; charset=utf-8" %> in every page that content arabic word
    in jsp page write
    <bean:message key="Form.label.sndName"/>
    if you folowing this concept you will not encounter any problem with javascript validation

  • Resource metering problem

    Hi guys,
    I am using a 3-node WS 2012 R2 Hyper-V cluster. For all virtual machines I enabled resource metering. However, on a random basis Measure-VM stops displaying numbers, it just returns blank fields instead of values...resource metering is still enabled on a
    VM, but all values are empty. This happens to random VMs, while resource metering for all other VMs keeps working properly.
    The only workaround is to disable & enable resource metering, however this resets values which is obviously a problem.
    Has anyone had this problem?

    Dear Susie Ma,
    I managed to "catch" one problematic VM.
    This is an interesting situation - because this VM is off. Still, resource metering stats should return some values, because they had been collected while VM was working. 
    I have another VM that is identical to this one in terms of guest OS and resources, and it is also off. This VM does return correct values for RM.
    I will copy RM stats for both machines. Problematic VM name is gale-test-vm02, while the working VM name is gale-test-vm05. Guest OS on both VMs is WS2012R2, however as VMs are off I don't think this matters.
    problematic VM (gale-test-vm02)
    AvgCPU :
    AvgRAM :
    MinRAM :
    MaxRAM :
    TotalDisk : 77828
    ComputerName : HV-FC1-N3
    VMId : 51281bc4-f3f9-4b91-8d85-367374b81e7e
    VMName : gale-test-vm02
    HardDiskMetrics : {Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics, Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics}
    MeteringDuration :
    AverageProcessorUsage :
    AverageMemoryUsage :
    MaximumMemoryUsage :
    MinimumMemoryUsage :
    TotalDiskAllocation : 77828
    AggregatedAverageNormalizedIOPS : 0
    AggregatedAverageLatency : 0
    AggregatedDiskDataRead : 25464
    AggregatedDiskDataWritten : 19059
    NetworkMeteredTrafficReport : {}
    working VM (gale-test-vm05)
    AvgCPU : 1
    AvgRAM : 510
    MinRAM : 1024
    MaxRAM : 1024
    TotalDisk : 92164
    ComputerName : HV-FC1-N3
    VMId : bef46674-d771-4f23-9a36-f533916b60ba
    VMName : gale-test-vm05
    HardDiskMetrics : {Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics, Microsoft.HyperV.PowerShell.VirtualHardDiskMetrics}
    MeteringDuration :
    AverageProcessorUsage : 1
    AverageMemoryUsage : 510
    MaximumMemoryUsage : 1024
    MinimumMemoryUsage : 1024
    TotalDiskAllocation : 92164
    AggregatedAverageNormalizedIOPS : 0
    AggregatedAverageLatency : 0
    AggregatedDiskDataRead : 24754
    AggregatedDiskDataWritten : 37198
    NetworkMeteredTrafficReport : {Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport, Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport, Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport,
    Microsoft.HyperV.PowerShell.VMNetworkAdapterPortAclMeteringReport}
    Are there any suggestions to what I can do in order to further analyze this?

  • Resource Bundle Problem

    I have a funny problem with Resource Bundles:
    In the property editor for a Hyperlink object I replaced the text property with the following: #{messages1.MyKey}
    I have defined an action on the hyperlink as follows:
    public String MyHyperlinkId_action ()
    String HyperlinkText = (String)MyHyperlinkId.getText();
    String HyperlinkID = MyHyperlinkId.getId();
    return null;
    getText() returns null since I use the Bundle to set the text. getId() returns the correct Id. If I hardcode the text in the property editor getText() returns that text correctly.
    Any idea, what the problem could be??
    Many thanks
    Tom

    Did you modify the hyperlink text property manually or through the property binding wizard. It could be a spelling mistake. Also make sure MyKey is defined in your resource bundle.

  • Resource central problem

    hello I have problem with resource central in Encore, I want to download templates (I dont have them because I have CS4 downloaded, not on DVDs). My first problem was I couldn't even join resource central, but I fixed it by removing config file from Required folder. In my resource central I just can´t see anything other than the news, it seems that entire menu bar is missing. just take a look at screenshots.
    I found this here on forum, that's probably how it should look like:
    But screenshot from my PC looks like this:
    So if you could help me or lead me to solution I would be very glad.
    PS> Resource central in Adobe Soundbooth works perfectly, I have Master Collection purchased and installed on my Windows 7.

    Thanks for the info but it is actually CS4 that Im having the issue with.
    I have  an open support ticket with Adobe but as of yet still no luck for a fix. 
    Have tried updates, recreating the preferences file, reinstallation.....  no joy 

  • SUNW.gds resource creation problem / service startup failure

    We have a vendor provided set of application server start and stop scripts that we are trying to mold into a GDS resource. The scripts must be run as a user not as root. This app takes about 6 minutes to start up and it creates about 400 processes in doing so. We gave the user cluster.modify auth so it can create the resource, and the command takes but when the resource is being created, the startup script does not seem to fire. So I'm a little stumped as to make this thing run under the user account project settings. The other thing I noticed is the ports that I specify in the list are never present until the end of the 6 minutes of startup junk, and the GDS seems to log problems about these ports at the onset of creation. Here is the command for the create:
    clrs create -g ss_wfm-rg -t SUNW.gds  \
    -p Start_Command="/home/appl/advxrt/R8.0g/TOP/SOLARIS/bin/StartServer" \
    -p Stop_Command="/home/appl/advxrt/R8.0g/TOP/SOLARIS/bin/ShutdownServer" \
    -p Resource_dependencies=advxprd,ss_hasp-rs \
    -p Port_list=22100/tcp,23100/tcp,27100/tcp,4100/tcp,17100/tcp \
    -p Start_timeout=420 \
    -p Stop_timeout=120 \
    -p Child_mon_level=-1 \
    ss_server_gds-rsAnd from the messages log...
    Aug 18 07:31:04 prddsm01nd01 SC[SUNW.gds:6,ss_wfm-rg,ss_server_gds-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host advxprd and port 221
    00: Connection refused.
    Aug 18 07:31:04 prddsm01nd01 SC[SUNW.gds:6,ss_wfm-rg,ss_server_gds-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <advxprd> and po
    rt <22100>.
    Aug 18 07:31:06 prddsm01nd01 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="ss_wfm-rg,ss_server_gds-rs,0.svc", cmd="/bin/sh -c /home/appl/advxrt/R
    8.0g/TOP/SOLARIS/bin/StartServer", Failed to stay up.
    Aug 18 07:31:06 prddsm01nd01 Cluster.PMF.pmfd: [ID 534408 daemon.notice] "ss_wfm-rg,ss_server_gds-rs,0.svc" restarting too often ... sleeping 30 seconds.
    Aug 18 07:31:06 prddsm01nd01 Cluster.RGM.rgmd: [ID 650825 daemon.error] Method <gds_svc_start> on resource <ss_server_gds-rs> terminated due to receipt of si
    gnal <9>Basically I would like to know if the ports list should include all ports that the app will eventually listen on, or some, or minimal? The other biggy is how to get this thing to launch as a user and if it fail over to another node does not start as root. I tried doing an su - acctname -c "script" but it won't start it. Thanks!

    Detlef or anyone familiar with GDS...
    We agree here that customizing the GDS using your template is the way to go. What I have noticed is that since creating the wrapper scripts to call the newtask command, setup the environment, etc, when the wrapper script finishes (kicking off the native script) the RGM sees this as a fault and immeidately tries to restart the agent. Here is a snippet of the messages log.
    Sep 24 13:48:03 devdsm01nd01 Cluster.PMF.pmfd: [ID 887656 daemon.notice] Process: tag="ss_stage-rg,ss_stage_server_gds-rs,0.svc", cmd="/bin/sh -c /home/appl/advxtst/tds/SS_kicker.sh", Failed to stay up.
    Sep 24 13:48:03 devdsm01nd01 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ss_stage_server_gds-rs status on node devdsm01nd01 change to R_FM_FAULTED
    Sep 24 13:48:03 devdsm01nd01 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ss_stage_server_gds-rs status msg on node devdsm01nd01 change to <Service daemon not running.>
    Sep 24 13:48:03 devdsm01nd01 SC[SUNW.gds:6,ss_stage-rg,ss_stage_server_gds-rs,gds_probe]: [ID 670283 daemon.notice] Issuing a resource restart request because the application exited.So we figured out that if we suspend the RG, then we can of course stop and start the app all day long using the clrs dis|enable commands but is using these wrapper scripts still the way to go even with the GDS template? Even assigning the user's project settings to the resources does not seem to allow the native vendor supplied startup scripts to launch (they say it is purely because we did not setup the working directory, etc, correctly, which the wrapper scripts do quite well). Is is normal for the wrapper script to "die" but yet have GDS probe the ports after X amount of time? Is this where the sleeping dummy comes into play?
    thanks in advance!

  • Inbound Resource Adapter problem on WebLogic 9

    Hi,
              I have a problem with inbound resource adapter deployed on WebLogic 9 when it's Work instance in run() tries to create an endpoint configured to RA via endpointActivation() - a call to MessageEndpointFactory's createEndpoint() method blocks if casted to interface that a receiving MDB implements!
              Or, to look at the code:
              endpoint = (MyMessageListener)factory.createEndpoint(null);
              will block. If a cast is removed the call does not block anymore but (of course) it is no longer possible to call an MDB.
              Any hints?

    Turning on Debugging, found the problem:
              <[JCABindingManager] activationSpec=null>
              <[JCABindingManager] The activationSpec is null, deActivation is skipped>
              In the application.xml, I had
              1. ejb (mdb) module and then
              2. connector module
              Changed the application.xml to
              1. connector module and then
              2. ejb (mdb) module
              container then called endpointDeactivation on undeployment.

  • Ear access standalone Resource Adapter problem

    I deployed a standalone resource adapter. Then I deployed a ear.
    In the ear, I try to look up the resource adapter, I got an exception:
    javax.naming.NameNotFoundException: No Object found: MyRA|null
    In weblogic-ra.xml, I added:
    <enable-global-access-to-classes>true</enable-global-access-to-classes>
    but still have the problem.
    However, when I embeded the RA in the ear and deploy the ear, I can get the RA by lookup()
    Is there anyway I can get successfully look up the standalone RA?
    P.S.
    My problem seems to be similar with an earlier post "Access Resource Adaptar outside the EAR".
    Access Resource Adaptar outside the EAR
    My problem is different.
    I lookup the RA in an ear deployed in the server.
    However, I'm not using EJB to lookup the RA.
    server version: weblogic server 11g r1
    Thanks a lot

    My RA runs correctly after deployment, I can see my RA in the JNDI tree.
    I just did some more tests.
    I use the following way to look up:
    InitialContext ctx = new InitialContext();
    ConnectionFactory cf = (ConnectionFactory) ctx.lookup("MyConnectionFactory");
    If I look up it in an EJB, I can get the object.
    But when I look up in a servlet, no object can be found.
    The servlet is in a war embeded in the ear.

  • Messaging Bridge/Resource adapter problem on Solaris?

              Has anyone successfully used the supplied resource adapter and messaging bridge
              on Solaris? We seem to have problems getting the resource adapter to be bound
              properly. After creating a connector through the admin console (using any of the
              weblogic supplied jms-*-adp.rar files) the element shows up in the JNDI tree but
              has no object information associated with it - which I assume means it is not
              bound. The following error shows up in the weblogic log file:
              ####<Jan 24, 2003 6:28:03 PM CST> <Error> <Connector> <fssun02> <AdminServer>
              <ExecuteThread: '0' for queue: '__weblogic_admin_html_queue'> <kernel identity>
              <> <190004> <ManagedConnectionFactory not found for jndiName eis/jms/WLSConnectionFactoryJNDINoTX.>
              We are using WL 7.0.1.0 and Solaris 2.8 (8). With the same configuration on Win
              2K everything works properly. Classpath's etc all seem to be correct. Any ideas?
              thanks,
              

    I finally got my Messaging Bridge (Tibco to a WLS Cluster) to work. See my post 3 messages before yours - to which no-one responded... :-(
              So here goes with my suggestion based on what I have done.
              1. Create a Distributed Destination for the WLS queue and "auto deploy" it your cluster. (Read the manual on how to do that, it is quite straightforward).
              2. In the Local Bridge Destination, put :
              Connection URL - nothing
              Initial Context Factory - weblogic.jndi.WLInitialContextFactory
              Connection Factory JNDI Name - <your JMS conection factory name>
              Destination JNDI Name - <the JNDI name given to the Distributed Destination>.
              I hope that works.
              Andy

Maybe you are looking for