CPU doesn't get to 100%

I'm running a stats calculation that takes about 20 minutes to process, and happened to look at the activity monitor while it was running.
I had thought that the CPU usage would be up near 100%, but the activity moniter reports 50%-40% in the idle category under the CPU tab. Anyone know why this might be? Can (or should) anything be done?
As far as I can tell from the activity monitor, the RAM is not maxed out. The stats program is R.
--Eric
Macbook Mac OS X (10.4.7) 1GB ram, 2.0 GHz Core Duo

Hmmm, I can explain the unbalanced processor usage through your stats application not being correctly, if at all, multithreaded to make use of both of your cores fully.
Why your application is not making full use of at least one of the cores though I would have no idea. Whaty I would suggest you do though is to check the developer's web site/support pages for possible answers. You can also write/call them and directly ask.

Similar Messages

  • Itunes causing CPU performance to get to 100 percent

    Hello,
    Lately itunes causes my CPU performance to oscillate between 10 and 100 percent, which causes my computer to stall out every few seconds. Here is a picture of what my cpu performancee looks like:[IMG]http://img209.imageshack.us/img209/1906/compct7.jpg[/IMG]
    This only begins to happen as soon as I start playing a song. If itunes is sitting idly, the computer runs fine.
    I used to have other programs open with itunes such as iconcertcal and isproggler, but i have made sure to uninstall such programs. I have tried uninstalling itunes and quicktime several times. This doesnt fix the problem.
    Sometimes when I exit out of itunes it tells me that another program is using the itunes interface. I dont know how to tell what program that is. Originally i thought the problem happened because my scrobbling agent was connecting to a server to report the songs I played (i use it for a site called last.fm), but as i said, the problem is continuing even after I uninstalled these programs.
    If anyone could help me through this issue, I'd appreciate it. I love itunes and I wouldnt want to have to switch to another music client.

    I think i may have fixed this problem. It had to do with foxytunes, an itunes plugin for Itunes.

  • Why My Cpu is getting at 100% when I open ITunes? (Memory problem)

    Good day everyone,
    Why is my CPU getting at 100% eating over 700 000k of ram as soon as I open Itunes?
    Even if I'm closing the process it reopens automaticly and take all the memory...I am under Windows Vista (Family ed.) and I have the latest version of ITunes...
    Thank you for your help!
    Regards,
    Dominique

    It worked for me, for iTunes Store and Safari both!
    amandav2 wrote:
    I found a solution to my problem.
    > start menu
    > accessories,
    > right click on the command prompt icon and choose "run as administrator". 
    Once it opens, type in the following command...
    netsh winsock reset
    hit enter
    You should get a message that the winsock reset successful and you will need to reboot your computer. 
    Reboot and when I reloaded itunes the store loaded fine.

  • J1iex issue : J_1IEXCDTL GR qty doesn't get updated

    Hi ,
    we have a process like .... Capture excise invoice , MIGO 103 , MIGO 105 and Post excise invoice.
    Facing one issue wherein system is not updated GR QTY in J_1IEXCDTL  table.
    The step I am following are
    1) Capturing excise invoice ( Say number is 100 and excise invoice internal number 45)
    2) Cancelled that excise invoice
    3) Re-creating exscise invoice with same number ( 100 and excise invocie internal number 46)
    4) Did MIGO 103
    5) Perfomred MIGO 105
    6) Now cancelled MIGO 105 ,
    Issue 1 : It changed the status of both excise invoices 45 and 46 (internal numbers) to "IN PROCESS"
    Actually the Status of 45 should be CANCELLED and 46 should be "IN PROCESS"
    Issue 2 : Generally reversal of MIGO , updates the "Qty of Goods received" in J_1IEXCDTL  but in this case Qty doesn't get chaned to 0 for Excise invoice 46.
    Issue 3: Because of all these issues , we are not able to cancel Excise invoce 46. System is throwing an error
    " REVERSE the material document before invoice cancellation"
    have u guys encountered such types of issue ...
    regards
    Shrey

    Hi,
    After canceling the GR thru MIGO, please go to J1IEX & select cancel & save it.
    It will help to change the status form in process to cancel in excise books.
    Hope above will help.
    shyam kogta

  • Can't download an app off the app store, I get error 100.

    I am trying to download the Logic pro x app from the app store but with no luck. I keep getting error 100. I have tried all the basic procedures shown on the mac support page. My debit card is fine, I just purchased this mac 2 days ago. Does anyone know how to go around this error?

    Back up all data.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    From the App Store menu bar, select
    Store ▹ Check for Unfinished Downloads...
    You may be prompted to sign in. If that doesn't solve the problem, quit the application and continue as below.
    Triple-click anywhere in the line below on this page to select it:
    open $TMPDIR../C
    Copy the selected text to the Clipboard (command-C).
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). A folder should open. From that folder, delete the subfolder named "com.apple.appstore".
    Quit Terminal. Launch the App Store and try again.

  • BlackBerry Passport won't get past 100%

    Hello,
    Yesterday I tried opening an e-mail on my BlackBerry Passport - the screen faded to a darker colour (as if it was going to open it), then returned to the hub. I tried to open it again and the same thing happened.
    I refreshed the hub by swiping 5 times from the top right to the centre of the phone - I was still unable to open the e-mail, or any other e-mails I had read in the past. 
    I then restarted my phone, however when it was rebooting, here's what happens:
    It displays the BlackBerry logo
    It shows the 'loading' screen (BB logo and the square loading bar around the logo)
    It gets to 100%, and that's it... nothing further happens
    Occasionally, it automatically restarts the cycle, displays the logo and then begins loading to 100% again. It stays on 100% for hours, the phone gets extremely hot then this morning the battery had died on it.
    I plugged in the charger, then minutes later the cycle started again. 
    I have tried powering off & on, holding both of the volume buttons and loads of other combinations, but the same issue persists. Interestingly, the phone doesn't seem able to actually fully power off. If I hold the power button down for 10 seconds, the screen goes black, a red light shows for around 2-3 seconds, and the restart process begins again. This happens regardless of how I shut the device down.
    Ordinarilly I'd take the battery out of my Q10 if something like this happened and put it back in - obviously this isn't an option with the Passport.
    Is there anything I can do? I tried to wipe it from Link, but it doesn't recognize the device is plugged in via USB. 
    This is literally 2 weeks old and I'm extremely frustrated that this is happening to such a new and 'necessary' device. 
    Thanks,
    Nathan

    Yea, I would be frustrated also.
    1. You can return the device for a warranty replacement.
    2. Try connecting to Link via a different USB port on your PC, or use a different PC with Link installed.
    You might try also making the connection to Link while the device is rebooting.
    I agree, a new device shouldn't have these issues.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of it.

    When I login, all of my desktop items are gone, the "Finder" icon is bouncing and a message asking to restore windows is blinking but unresponsive. I can't exit out of it. What do I do? I've tried force quitting, and it doesn't get rid of this message. When I login to my husband's account, this message does not appear.

    Hey sunnyday7!
    Here is an article that can help you address this issue:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Additional Information
    OS X automatically relaunches the Finder when it is quit. If the Finder is unresponsive, use Force Quit to relaunch it. Select Finder in the Force Quit Window or Dock, then click Relaunch.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My mac froze in an application so I shut it down by powering off with button, now when I try to turn it on I have a grey screen with Apple loge and the timer swirling but it doesn't get past this, please help!

    I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further.  I have tried the diagnostic test but nothing was found.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • Double Click in ALV TREE doesn't get triggered

    Hello All,
    Double click event on item in a alv tree report doesn't get triggered. I thought I was doing everything right. Please help me out.
    Look at the code below and tell me what else I need to do.
    <b>FORM register_events .
    Event registration: tell ALV Tree which events shall be passed
    from frontend to backend.
      DATA: lt_events TYPE cntl_simple_events,
            l_event TYPE cntl_simple_event,
            l_event_receiver TYPE REF TO lcl_tree_event_receiver.
    Frontend registration:  get already registered tree events
      CALL METHOD g_alv_tree->get_registered_events
        IMPORTING
          events = lt_events.
    Frontend registration: add additional event ids
      l_event-eventid = cl_gui_column_tree=>eventid_node_double_click.
      APPEND l_event TO lt_events.
    Frontend registration: provide new event table to alv tree
      CALL METHOD g_alv_tree->set_registered_events
        EXPORTING
          events                    = lt_events
        EXCEPTIONS
          cntl_error                = 1
          cntl_system_error         = 2
          illegal_event_combination = 3.
      IF sy-subrc <> 0.
        MESSAGE x208(00) WITH 'ERROR'.                          "#EC NOTEXT
      ENDIF.
    Register events on backend (ABAP Objects event handling)
      CREATE OBJECT l_event_receiver.
      SET HANDLER l_event_receiver->node_double_click FOR g_alv_tree.
      SET HANDLER l_event_receiver->item_double_click FOR g_alv_tree.
      SET HANDLER l_event_receiver->on_function_selected FOR g_toolbar.
    ENDFORM.                    " register_events</b>
    When I double click on item on the report double click event doesnt trigger. what could be the problem? Any sample programs?
    Thanks,
    Chandni

    Hi,
    Here is a sample code for you.
    report ztree.
    TABLES : vbak.
    DATA: BEGIN OF mylist OCCURS 50. " Internal table hierarchy
    INCLUDE STRUCTURE snodetext.
    DATA: END OF mylist.
    DATA: f15 TYPE c.
    DATA :
    BEGIN OF gt_sales OCCURS 0,
    vbeln LIKE vbak-vbeln,
    kunnr LIKE vbak-kunnr,
    matnr LIKE vbap-matnr,
    arktx LIKE vbap-arktx,
    END OF gt_sales.
    SELECT-OPTIONS : s_vbeln FOR vbak-vbeln.
    START-OF-SELECTION.
    SET PF-STATUS 'ZTREE1'.
    SET TITLEBAR 'T1'.
    Fill internal table with pseudo-data
    PERFORM fill_itab.
    Hierarchy output
    PERFORM main.
    *& Form FILL_ITAB
    text
    --> p1 text
    <-- p2 text
    FORM fill_itab .
    *Fill the gt_sales table
    SELECT vkvbeln vkkunnr vpmatnr vparktx INTO CORRESPONDING FIELDS OF
    TABLE gt_sales
    FROM ( vbak AS vk INNER JOIN vbap AS vp ON vkvbeln = vpvbeln )
    WHERE vk~vbeln IN s_vbeln.
    SORT gt_sales BY vbeln kunnr.
    *Fill the root
    mylist-name = 'Report Tree List'.
    mylist-color = 1.
    mylist-intensiv = '1'.
    mylist-text = 'Report Tree List'.
    mylist-tlength = 16.
    mylist-tlevel = 1.
    mylist-tcolor = 1.
    mylist-tintensiv = '1'.
    mylist-text1 = 'using "RS_TREE_CONSTRUCT" function'.
    mylist-tlength1 = 50.
    mylist-tcolor1 = 2.
    mylist-tintensiv1 = '0'.
    APPEND mylist.
    LOOP AT gt_sales.
    ON CHANGE OF gt_sales-vbeln.
    mylist-name = 'level1'.
    mylist-color = 0.
    mylist-intensiv = '0'.
    mylist-text = 'Sales Document no:'.
    mylist-tlength = 20.
    mylist-tlevel = 2.
    mylist-tcolor = 7.
    mylist-tintensiv = '1'.
    mylist-text1 = gt_sales-vbeln.
    mylist-tlength1 = 30.
    mylist-tcolor1 = 2.
    mylist-tintensiv1 = '0'.
    APPEND mylist.
    ENDON.
    ON CHANGE OF gt_sales-kunnr.
    mylist-name = 'level2'.
    mylist-color = 0.
    mylist-intensiv = '0'.
    mylist-text = 'Customer no:'.
    mylist-tlength = 20.
    mylist-tlevel = 3.
    mylist-tcolor = 5.
    mylist-tintensiv = '1'.
    mylist-text1 = gt_sales-kunnr.
    mylist-tlength1 = 30.
    mylist-tcolor1 = 3.
    mylist-tintensiv1 = '0'.
    APPEND mylist.
    ENDON.
    mylist-name = 'level3'.
    mylist-color = 0.
    mylist-intensiv = '0'.
    mylist-text = gt_sales-matnr.
    mylist-tlength = 15.
    mylist-tlevel = 4.
    mylist-tcolor = 4.
    mylist-tintensiv = '0'.
    mylist-text1 = gt_sales-arktx.
    mylist-tlength1 = 30.
    mylist-tcolor1 = 2.
    mylist-tintensiv1 = '0'.
    APPEND mylist.
    ENDLOOP.
    ENDFORM. " FILL_ITAB
    *& Form MAIN
    text
    --> p1 text
    <-- p2 text
    FORM main .
    PERFORM hierarchy. " construct & draw the tree
    ENDFORM. " MAIN
    *& Form HIERARCHY
    text
    --> p1 text
    <-- p2 text
    FORM hierarchy .
    PERFORM build_tree.
    PERFORM draw_tree.
    ENDFORM. " HIERARCHY
    FORM BUILD_TREE *
    Builds the tree from internal table *
    Uses the Function module RS_TREE_CONSTRUCT *
    FORM build_tree.
    CALL FUNCTION 'RS_TREE_CONSTRUCT'
    TABLES
    nodetab = mylist
    EXCEPTIONS
    tree_failure = 1.
    ENDFORM. "build_tree
    FORM DRAW_TREE *
    Builds the tree from internal table *
    Uses the Function module RS_TREE_DISPLAY *
    FORM draw_tree.
    sy-lsind = 0.
    CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
    EXPORTING
    callback_program = 'ZREPORT_TREE'
    callback_user_command = 'NODE_SELECT'
    IMPORTING
    f15 = f15.
    ENDFORM. "draw_tree
    FORM NODE_SELECT *
    Handles selection of nodes *
    FORM node_select TABLES knoten STRUCTURE seucomm
    USING command
    CHANGING exit
    list_refresh.
    Processing of commands for hierarchy list
    CASE command.
    WHEN 'DISP'.
    CASE knoten-id.
    WHEN '000002'.
    *Display Sales Order
    SET PARAMETER ID 'AUN' FIELD knoten-text1.
    CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
    WHEN '000003'.
    *Display Customer
    SET PARAMETER ID 'KUN' FIELD knoten-text1.
    CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
    ENDCASE.
    ENDCASE.
    list_refresh = 'X'.
    ENDFORM. "node_select

  • My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

    My father updated his iPhone and once he did that he would receive all of my texts and iMessages, is that because we are on the same iCloud account? And if that's why how can I remove it or make it so he doesn't get all my messages

    you can change the accounts of different apps in the phone's settings menu.

  • Satellite L20: Modem doesn't get dial tone

    Hi,
    My L20 notebook doesn't get a dial tone whem I'm trying to dial up. On antoher pc the connection works well, so I'm sure that the line has a dial tone and that the other computer is 'listening'.
    I also tried to uncheck the 'wait before dial tone' option, tried to remove it from the Device manager, but after this all the modem still doesn't work. The current driver that is installed is version 7.20.00.00, because I can't install the latest version (7.25.00.00) (setup doesn't finish well, no specific error is given).
    Does anybody knows what to do??

    Open the system control panel and choose the Phone and modem options.
    There check the Modems tab. The modem should be placed in the list.
    If not, so you need to install the modem driver.
    Check the Modem function by pressing the "Query Modem" button.
    If the Modem Information window contain a list of AT commands (including ATI2, ATI3, ATI4 etc.), then the modem is correctly installed. The ATI5 command ends in with the number for the selected Regional settings (for example Germany = 06).
    To change the Regional Setting please use the Toshiba Internal Modem Region Select Utility.

  • Delete bank details for a BP in CRM 5.0, it doesn't get deleted from R/3

    Hi,
    When I delete bank details for a business partner in CRM, it doesn't get deleted form R/3.
    Although I can see a green bdoc with confirmed status, with no errors. Any clue?
    Regards,
    Kaushal

    Yes, when I add a new bank detail, it gets properly reflected in R/3. The problem is only during deletion.
    I think I've reached the solution - notes 1016909 and 941660.
    Regards,
    Kaushal

  • I am getting error 100 with adobe download assistant

    I am getting error 100 when I try to log into adobe download assistant. I am using windows vista , on chrome, and use AVG firewall which I allow all adobe. What can I do trying to install Photoshop cs5 extended.

    After completing solution 1 in Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html you may also want to try temporarily disabling your AVG firewall.
    Alterantely you can follow the steps listed in http://forums.adobe.com/thread/981369 to initiate a direct download.

  • I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download,

    I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download, but to no avail.

    uninstall anything cc that's already installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and the reinstall, Adobe: Creative, marketing, and document management solutions

  • Elements Organizer Not Responding - Locks when gets to "100%"

    This is simply unacceptable.  If I understand right, EVERYONE who uses Organizer finds it does not work properly when you have a lot of pictures (I have lots).  It locks as the app starts, while it searches <watched folders> - gets to 100% then "Not responding" error shows.  I can't go in and tell it to stop watching folders, since it is locking.  Ideas anyone, before I return this and get a refund?   And shame on Adobe for allowing this to continue - there is someone who owns this function in the software development group, and they need the opportunity to find new career challenges.

    Which OS? Please refer to:
    http://tinyurl.com/afrvtk3 for Windows
    http://tinyurl.com/bovy39o for Mac
    Please revert back if your issue is not resolved.
    ~Andromeda

Maybe you are looking for