Create a .pst template that is entry pt order using trays

Hello all,
I would like to create a .pst template with trays on pallets in entry point order. However, I would like to know if there is a solution to the problem of random trays in the file that are not on pallets. At the moment, I use Monticello to assign the trays to the pallet above or below it. This however takes a long time to do and is tedious. Leaving it alone creates confusion on the production floor. I can create a template that creates 1ft tray pallets but, that is just silly while doubling the number of pallets for the job. Also, I suppose I can eliminate certain zips in specific entries so those trays fall to the end of the file. But, the files that are used change each time. Not very cost effective way to use the programmers time either. Anyone have any thoughts?

Hello Michael,
   I'm not certain I understand fully what it is you're doing right now with the trays that don't get palletized, since to me it sounds like you're assigning them to pallets where they don't really belong. But that would potentially cause other problems.
   See if this is what you're looking for - it seems like you want to use Presort's "mapping entry points to schemes" feature. If you use that, you would set up a pallet scheme, followed by a tray scheme to pick up anything that can't be palletized. Let's say these are scheme 1 and scheme 2 (it could be more complicated than that if you wanted different mins at different entry types, for example, but let's stay simple). You could set your EP defaults block to have "Scheme Nums per Entry Pt" set to 1, and leave this parameter blank in all the entry point description blocks except the last (local) one, assuming that's where you want to pick up all the leftovers for local entry. In that last EP description block, set that parm to "ALL" so it will produce both pallets and non-palletized trays.
   Then for all your destination entry cases, there will be only palletized trays, and for the local entry you will get pallets followed by any loose trays. This should prevent random loose trays from appearing in the middle of the mailing.
   Let us know if this is what you're looking for, or if there's some other aspect I didn't catch from your first post.

Similar Messages

With adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

with adobe standard, is it possible to create a fillable document that can be saved and used repeatedly as a fillable doc

Hey Paul,
Please let me know what version of Acrobat Standard are you using.
Regards,
Anubha

Create an AP Invoice based on a Purchase Order using SDK

Hi,
What are the steps to create an AP Invoice based on a Purchase Order using DI API?
Which methods of which objects to use and what parameters to pass?
Thanks.

Hi Rajesh,
Here is a sample to create an Invoice based on a Sales Order. The same way you can change as per your requirement:
SAPbobsCOM.Documents oInvoice = default(SAPbobsCOM.Documents);
            oInvoice = (SAPbobsCOM.Documents)SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
            oInvoice.CardCode = "C000003";
            oInvoice.DocDueDate = DateAndTime.Now;
            oInvoice.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oOrders);
           oInvoice.Lines.BaseEntry = Convert.ToInt32(3616);
           oInvoice.Lines.BaseLine = 1;
            oInvoice.Lines.Quantity = 3;
            oInvoice.Lines.Add();
            oInvoice.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oOrders);
            oInvoice.Lines.BaseEntry = Convert.ToInt32(3616);
            oInvoice.Lines.BaseLine = 2;
            int kth = 0;
            kth = oInvoice.Add();
            if (kth != 0)
                int irrcode;
                string errmsg;
                SBO_Company.GetLastError(out irrcode, out errmsg);
                Program.oMainSAPDI.ShowMessage(errmsg, BoStatusBarMessageType.smt_Error);
The main thing to remember is Base Type, Based Entry and Base Line.
Hope it helps.
Thanks & Regards
Ankit Chauhan

How do I create a .llb file that holds all the subVIs used in a VI?

Hi
I wish to create a .llb file that holds all the subVIs(~200) used in my main VI.
When I open my main VI, and look into the 'show VI hierarchy' I see a lot of subVIs, so to copy all these subVIs into the library file is going to be really time consuming. I am hoping there is an option in Labview by which I could automatically put all these subVIs into one library file?
Thank you
Gautham Radhakrishnan
Dept. Of Physics
University of Toronto

In your toplevel VI, go to "File..save with options".
Now select "Development distribution", press save, and give it a name for the llb.
LabVIEW Champion . Do more with less code and in less time .

How do I create a .llb file that includes only the subVIs used in a VI?

hi....
can anybody help me ...i wanna creat a library file that holds only the sub-VIs that are running in particular main VI .
are there options for that in labview??

I don't think understand the answer. From just the top level VI, do like I said and an llb will be created with the top level and all subVIs. You can also edit the llb (Tools>Edit VI Library) and make your main VI top level. A note of caution. An llb was originally designed as a means of storing VIs with extended names. With modern OS's allowing long file names, an llb is less useful except as a convenient means of distributing a group of VIs from one location to another. This would be done as a final distribution such as an instrument driver or to another developer who would then convert the llb to a folder. There are several problems with keeping the development VIs in an llb. One is that it doesn't work with any form of source code cont
rol. Another is that a corrupt VI in an llb can and has made the entire llb unreadable so unless you are absolutely religous about backups, you made find yourself in deep trouble some day.

Is it possible to create a Muse site that my client can edit using a content management system?

Muse is a great tool for a print based designers to be able to create websites.
However most clients want to be able to manage their content and hosting.

A good example would be this site for a holiday let business:- http://www.gurnard-pines.co.uk
The client called me and said they wanted a website design, they had a domain name and web hosting etc.
I created a design in Illustrator and asked a freelance web developer to code the site and incorporate a content management system, as the client wanted the ability to change the dates / prices / availability / attractions etc.
When I get asked to create a website, the client nearly always wants the ability to edit the content themselves to avoid the cost of implementing regular changes.
Hope this helps, feel free to call me on 07799 697646.
Stuart

Create and Pack Handling Units in the Sales Order Using HU_CREATE_ONE_HU

Hello Experts,
I am trying to use HU_CREATE_ONE_HU function module to create a handling unit and pack it with specific line items in the sales order program in the background. I am able to create the handling unit and pack it but it does not get associated to the sales order / line item. If you look at the sale order's packing proposal, it does not show it packed. If I look at VEKP / VEPO, I see where it was created but there is no value for vbeln or the posnr I proposed. Below is the code, I am using. Does anyone know what I am doing wrong or is there another function module I can use?
LOOP AT t_vbap.
    CLEAR:   is_header_proposal, it_items, es_header, et_items, et_messages, t_vbap2.
    REFRESH: et_items, et_messages, t_vbap2.
    is_header_proposal-exidv          = '$1'.
    is_header_proposal-exida          = 'A'.
    is_header_proposal-vhilm          = 'UNIBOX'.
    is_header_proposal-hu_status_init = 'A'.     "planned
    is_header_proposal-status         = '0001'. "planned
    "get the components that make up this subassembly including the parent.
    SELECT * FROM vbap
      INTO TABLE t_vbap2
     WHERE vbeln = t_vbap-vbeln
       AND posnr = t_vbap-posnr. "parent
    SELECT * FROM vbap
      APPENDING TABLE t_vbap2
     WHERE vbeln = t_vbap-vbeln
       AND uepos = t_vbap-posnr. "children
    "now load the items to be packaged in the proposal
    LOOP AT t_vbap2.
      CLEAR: it_item.
      it_item-velin    = '1'. "material item
      it_item-belnr    = t_vbap2-vbeln.
      it_item-posnr    = t_vbap2-posnr.
      it_item-quantity = t_vbap2-kwmeng.
      it_item-meins    = t_vbap2-meins.
      it_item-matnr    = t_vbap2-matnr.
      it_item-werks    = t_vbap2-werks.
      it_item-lgort    = t_vbap2-lgort.
      APPEND it_item TO it_items.
    ENDLOOP.
    CALL FUNCTION 'HU_INITIALIZE_PACKING'.
    CALL FUNCTION 'HU_CREATE_ONE_HU'
      EXPORTING
        if_create_hu       = 'X'
        is_header_proposal = is_header_proposal
        it_items           = it_items
      IMPORTING
        es_header          = es_header
        et_items           = et_items
        et_messages        = et_messages
      EXCEPTIONS
        input_missing      = 1    " Data that is Necessary for Creation is Missing
        not_possible       = 2    " HU Creation not Possible
        header_error       = 3    " HU Header Data Contains Incorrect Data
        item_error         = 4    " Items Cannot be Created
        serial_nr_error    = 5    " Serial Number Error
        fatal_error        = 6    " Internal Error
        OTHERS             = 7.
    CALL FUNCTION 'HU_POST'
      EXPORTING
        if_synchron = space
        if_commit   = 'X'.
ENDLOOP.
Thanks for the help.
Laura

The abap statement does not make sense.
xlips_high_posnr = ( lips-posnr / tvlk-incpo ) * tvlk-incpo
posnr & incpo are both type numc length 6.
Here is my recommendation to catch the divide by zero error.
data: l_oref    type REF to cx_root.
data: l_text    type string.
TRY.
        clear l_text.
         xlips_high_posnr = lips-posnr / tvlk-incpo.
        CATCH cx_sy_zerodivide INTO v_oref.
          l_text = l_oref->get_text( ).
        CLEANUP.
*      Put your code to do further processing if it is divide by zero
ENDTRY.

How can I create a template that does not have automatic formatting but my own?

I have just switch to a Mac from a PC and am having a terrible time with pages. All I want to do is create my own template that has NO AUTOMATIC FORMATTING so I can do my own.
There is nothing in the HELP sections on how to delete the automatic formatting. I do not want to use any of their Outline Templates just make up my own.
I would be so so grateful if someone could help me with this. I took a one-on-one and his idea of how to get rid of formatting in my own template DID NOT WORK!
Thanks, Deborah

Deborah
Hard to see your problem, and if there is something THAT DOES NOT WORK! it would obviously be useful to know WHAT that is and WHY you believe it does not work, so we can ACTUALLY RECOMMEND A SOLUTION.
Just select any text and change it to whatever you want using the toolbar and/or the Text inspector.
The Outlines are just a view of your text, in a form that lets you easily organise and move it around.
Menu > View > Show Styles Drawer
Reveals whatever style has been applied to a heading or text and you can update or create new styles by clicking on the small triangle next to it > Redefine style from selection
When you are finished just save it as a Template.
Peter

How to create an input template/sheet to a summary spreadsheet

I've done this type of sheet in excel and access years ago, but have no clue on how to do it in numbers. Example, I have a spreadsheet that summarizes specific actions for specific individuals in a specific event over the course of many events. What I want to do is create an input template that populates the summary spreadsheet so I can update on the fly such as from my iPad while at the event. I'll use a soccer game as an example. My summary spreadsheet captures goals, shots and assists for each player for each game and sums it up for a season. For capturing multiple stats at a game (event), select the (action) from a radius button or drop down from a pre-defined cell content (e.g. goal or assist), Then pick the player who performed the action from a pre-defined cell content drop down. Hit an execute button and the data populates the spreadsheet behind it, or something similar to this. Does anyone have any ideas on how this front end input template could be executed in Numbers? I currently manually track this manually and its a pain, would love to drop this into the iPad and do it on the fly. Maybe numbers is'nt the right tool? Thanks

DY,
Numbers, in and of itself, won't give you the functionality you're talking about. To be fair, the context you referenced is a spreadsheet, plus a database, plus a programming framework that integrates the two.
You could look at AppleScript or Xcode to provide you the environment in which to create the data entry / data manipulation pieces. Even so, though, you still wouldn't have the database management system (which I'm assuming you use in this example, even though you've just mentioned the data entry and data transport parts).
It's not so much that Numbers "isn't the right tool" -- it's that the environment you're remembering wasn't just a spreadsheet, it was a couple of applications and a macro'ing / programming environment, whereas Numbers is just the spreadsheet part of that environment in an OS X context...

How to create a Document Template for "Scanned" PDFs? (Editing isn't necessary.)

I have a Custom Content Type called "Vendor Invoices". It is based off the "Document" Content Type. I would like to create a "Document Template" that will support "PDFs", but the PDFs should always be added via an
"upload" (since these are Invoices that we will be "receiving", there is no need to actually "Create" one). So, I don't need to support "New Document" or the "Drag and Drop" "New Document". I simply
need the users to "Upload" the documents. Although, I have created several Columns for this Content Type (Invoice Number, Invoice Date, Vendor Name, etc) that the user will input when uploading the Invoice (PDF), so I WOULD like the "Document
Information Panel" to appear. Is that only possible by using one of the Office document types?
Any thoughts or ideas on how I might accomplish this?
Thanks!
Shayne

Hi,
According to your post, my understanding is that you want to create a pdf content type.
We can use the PDF SharePoint Cumulative Update 1 to achieve this scenario, it allows you to create new PDF template and then deploy it as a Content Type.
There is an article about this topic, you can refer to it.
https://www.pdfshareforms.com/deployment-of-pdf-template-as-sandboxed-wsp-solution/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How to create PDF Merging Template with Buttons & javascript?

I am trying to create a PDF template that has buttons that request a file or email be inserted as you progress through the document.
There will be a drop down menu that has options for different types of "customers", each type of customer will show a different set of buttons.
Each button, once clicked will prompt for a PDF document to be inserted. Each button will be labeled what it requests. For example, "Receipt", "Title", "Insurance Policy" etc. The documents will need to be merged in the order they were received via the buttons.
In the end, after all the buttons have requested the specific file, it will merge the selected files into one PDF document.
Does anyone have some insight or ideas on how to get started on this? I am sure Java script will be involved.
Thank you! Your help is appreciated!

Hi Travis ,
You are absolutely correct ,to get more accuracy ,you will certainly have to use java script to get this task done.
However if you want to add buttons ,you can do it from Acrobat.
Tools>Interactive Objects>Add Button
Please check the button properties if it reduces your work to any extent .Go through all the options and see how it goes.
Regards
Sukrit Dhingra

Numbers Question - How to create an input template to summary spreadsheet

I've done this type of sheet in excel and access years ago, but have no clue on how to do it in numbers. Example, I have a spreadsheet that summarizes specific actions for specific individuals in a specific event over the course of many events. What I want to do is create an input template that populates the summary spreadsheet so I can update on the fly such as from my iPad while at the event. I'll use a soccer game as an example. My summary spreadsheet captures goals, shots and assists for each player for each game and sums it up for a season. For capturing multiple stats at a game (event), select the (action) from a radius button or drop down from a pre-defined cell content (e.g. goal or assist), Then pick the player who performed the action from a pre-defined cell content drop down. Hit an execute button and the data populates the spreadsheet behind it, or something similar to this. Does anyone have any ideas on how this front end input template could be executed in Numbers? I currently manually track this manually and its a pain, would love to drop this into the iPad and do it on the fly. Maybe numbers is'nt the right tool? Thanks

Might try that one on the Numbers Forum here
http://discussions.apple.com/category.jspa?categoryID=202
Regards
TD

Can I create multiple presentation templates against one content item?

I want to create multiple presentation templates that publish the same content item in different ways.
As far as I can tell from the publisher GUI this is not possible.
Am I missing something?

It may not be feasible to have two PT associated with a DT technically. But there is a workaround / solution for your requirement. thats what i meant in my prev post.
To accomplish your requirement in a simple fashion try doing this
1) copy the contents of all PT, DT and Content Items with all its folders in the _NEWS (portlet templates) folder to a new folder called 'PortletA' (or) make use of the News portlet template to create a portlet
2) Now modify the DT's and PT's according to your requirement.
3) Create a portlet using "Published Content" webservice and configure the 'Main' to your portlet.
4) if you create and pblish new article, you can find two html's are getting published.
If this doesn't resolve your requirement,
Create two sets of Dt & Pt's. In the article PT, try to add the other Pt as "related items to publish", so on publishing one the other one gets published.
Bharat Karthik
[email protected]
http://www.eminenttech.com/
Edited by bharatkarthik at 09/05/2007 2:35 PM

Title template that updates all titles if it's changed

Hi!
In Premiere Pro, can I create a title template that, if I change it, will update all the titles in my project that use that template?
Thanks!

That is one reason that making titles by animating the source text in After Effects comes in handy. You can change anything you want and the text just changes at the right times.

Creating PDF Merging Template with Buttons & javascript

I am trying to create a PDF template that has buttons that request a file or email be inserted as you progress through the document.
There will be a drop down menu that has options for different types of "customers", each type of customer will show a different set of buttons.
Each button, once clicked will prompt for a PDF document to be inserted. Each button will be labeled what it requests. For example, "Receipt", "Title", "Insurance Policy" etc. The documents will need to be merged in the order they were received via the buttons.
In the end, after all the buttons have requested the specific file, it will merge the selected files into one PDF document.
Does anyone have some insight or ideas on how to get started on this? I am sure Java script will be involved.
Thank you! Your help is appreciated!

Hi Travis ,
You are absolutely correct ,to get more accuracy ,you will certainly have to use java script to get this task done.
However if you want to add buttons ,you can do it from Acrobat.
Tools>Interactive Objects>Add Button
Please check the button properties if it reduces your work to any extent .Go through all the options and see how it goes.
Regards
Sukrit Dhingra

Create a .pst template that is entry pt order using trays

Similar Messages

Maybe you are looking for