Create a script for "when movie ends, go to new page in site"

Sorry. Very new to this.
I have a simple Flash animation which I have imported to a page in my DW doc. When the anim finishes, I would like the page to go to a different page in the same site. Without clicking.
I assume I have to write some AS on the last frame of my FL file, correct?
so... something like this (don't laugh)
var link:URLRequest = new URLRequest("page.html")
stage (or something?).addEventListener(what goes here.ENDMOVIEor something like that, endMovie);
function endMovie(event:WhatGoesHere):void
navigateToURL(link);
Obviously I need help.
TIA
Gretchen

Thanks. But I can't get this to work. I placed that code in the last frame of my movie (I tried stop() both before and after it as well), I exported as a swf. I imported it to DW (import--media). the movie runs, but does not go to new page.
should the URLRequest have www before it? I don't think so because it is in the local root folder.
Any other suggestions?
( I am also searching old messages on same subject)
TIA again.
Gretchen

Similar Messages

How to create a playlist for the movies I have?

Hope someone can help me here. How do you set the movies to play continuously? I can't seem to create a playlist for the movies. You can create playlist for podcast videos and musics but how do you creat playlist for the 3 movies I have got on my iphone?
Any help will be greatly appreciated.

Not exactly true. As absurd as it sounds, if you have just one music track in your playlist, then you can select it from the Playlists section on the iPhone and play your videos, movies etc. one after the other.
I have created a completely empty music track in Garageband which I drag onto the end of each and every video playlist I create. An ugly solution, but it works.
You have to remember to check the playlist in both the Video and Music sections in iTunes->Devices->Your iPhone.

How to create a script for DB Startup

Hi to all,
I need to create a script for DB Startup with this command:
sqlplus /nolog
conn sys/mypwd as sysdba;
startup;
exit
It is possible ?
At now, when I run Sqlplus /nolog I see only the prompt sql>.
I Hope in Your help.
Best Regards
Gaetano

Hi,
Assuming you are on Windows environment. You may use the following two scripts to startup the database.
startup.bat
========
net start OracleServiceYOUR_INSTANCE_NAME
set oracle_sid=YOUR_INSTANCE_NAME
D:\oracle\product\10.2.0\db_1\bin\sqlplus /nolog @C:\DBA\startDB.sql
net start OracleOraDb10g_home1TNSListener
pause
startDB.sql
=========
connect sys/your_password as sysdba
startup pfile=D:\ORACLE\ORADBA\pfile\init.ora
exit
Similarly, you may write your own shutdown script.

Boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

boot camp 5.0.1 aways crash when i try to create a partition for windows. My mac is new MBP retina.Any one can help me?

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Trying to create a script for iTunes

This is one of those questions that probably has a very simple answer unless you haven't worked with Automator or applescripts.
I found Automator, created a script for iTunes to change settings for audiobooks that I import from CD so that it remembers it's place in a "song", makes it so that it doesn't show up in shuffle lists, and doesn't have a gap between songs. Yippee for me.
I click on File, Save, name the file and save it and ... it doesn't show up under iTunes. It only took me 45 minutes to get it so that the scroll icon shows up under iTunes (I'm so confused now that I don't even know which thing I did caused that to happen) but my script I created doesn't show up.
I did find one place that said to place the file in (myname\library\scripts\programname) So I went to my home folder, find the library folder, found the scripts folder, and found only one application under there (Safari) but no iTunes. I created a folder called iTunes and saved my script there but ... it doesn't show up under iTunes.
I did try quitting iTunes and opening it back up and ... it still isn't there.
Is this even the right place to ask this question?

OlsonBW wrote:
........Is this even the right place to ask this question?
If it's not, then may I recommend MacFormat Magazine's own discussions forum -
http://forum.macformat.co.uk/login.php?redirect=privmsg.php&folder=inbox
I found that this is full of 'Users' and more likely to be experienced using AppleScript and Automator.
Although I don't say that someone here won't be able to help. Just might take longer here or, as you yourself suggest, may need posting elsewhere on this site. Just speaking from previous experience of both sites

HT200020 I did the fix but it didn't fix the issue. It allows me to create the script but when it runs it will not add the user account.

I did the fix but it didn't fix the issue. It allows me to create the script but when it runs it will not add the user account.

Here is all the same setting aside from the user info being created.
https://www.dropbox.com/s/kkxmhls3bfs6ns3/Apple%20Support%20Installer%20Script.p kg

Would like to create a script for list all elements and structure of an indesign document

Hello everybody,
I'm a very beginner in indesign scripting.
I would like to create a script in order to list all elements and the inner structure of a n indesign document.
The aim for me is to understand how elements are sorted and arranged into indesign, and be able to find an specific element by its item name.
The output document could be an xml or txt document with a treeview structure.
I would like have a rough idea of which kind of javascript code I should use for that.
Thanks for answers.

Hi Ossydoc,
You can use Muse to create such a website. All you need to do is, create links in Muse for the sermons and select " link to File " in the hyperlink option and link to those Mp3 files.
Please refer to this screenshot :- http://prntscr.com/4xvdup
Now, when you publish your site, Muse would automatically upload those files onto the server and the users would then be able to listen as well as download those sermons using the links on your site.
Hope this helps
Regards,
Rohit Nair

Creating a script for inserting images

I am new to the scripting concept, so please forgive me when I use incorrect terminology.
I would like to create a script that will automatically place images in my InCopy document. Basically I want to type the names of image files in an InCopy document then run a script that will replace the name of the file with the actual image (either as an embedded image or as an image in a graphics frame, although the graphics frame might not work if the document isn't linked to an InDesign document.)
I'm assuming I'd have to identify the image name in some way (slashes or something before and after) and during the script I'd have to identify where to find the given images, such as which folder they are in.
Is this possible in InCopy?
Eventually, these InCopy documents will be used in InDesign. Would it be better/faster to use a script to import these images into InDesign instead of InCopy?
(In case the information is important, the images are all either .tif files or .eps files.)
Also, how do I find someone who can write this script for me? I'm assuming there are freelance programmer people out there... how do I find one?
Thanks for any advice/help you can give me!

senza wrote:
this is ok, this i understand now. But where to tell which schema for which user?I don't understand this question. You create a synonym in your own schema for the object you want a synonym for...
so instead of referencing
select * from scott.empyou would create a synonym for scott.emp, so you can do
select * from emp

How to display button when movie ends

Hello!
I made a short movie in After Effects and now I'm trying to add some buttons to it. The movie starts with an intro and when that ends a "continue" button should appear and take you to the next part. My idea was to place a screenshot of the last frame in the next keyframe with a stop() function after the intro and add the button to that but it would be less work to make the button appear the end of the movie using some code I have no idea about I would really appreciate some guidance.

put a stop() in your swf's main timeline last frame and put a continue button on-stage in that last frame.
p.s. you'll need some coding for that button so it does something.

Required to create a script for base table update using XMLSTORE package.

Hi can anybody provide me some help full suggestion on how to update base table using XMLSTORE package.
I created a simple script for Employee table and can able to do the basic operation like Insert and update on the table.
Query is as follow's
DECLARE
insCtx DBMS_XMLSTORE.ctxType;
rows NUMBER;
xmlDoc CLOB :=
'<ROWSET>
<ROW num="1">
<EMPLOYEE_ID>922</EMPLOYEE_ID>
<SALARY>1801</SALARY>
<HIRE_DATE>17-DEC-2007</HIRE_DATE>
<JOB_ID>ST_CLERK</JOB_ID>
<EMAIL>RAUSSJACK</EMAIL>
<LAST_NAME>JACK</LAST_NAME>
<DEPARTMENT_ID>20</DEPARTMENT_ID>
</ROW>
<ROW>
<EMPLOYEE_ID>923</EMPLOYEE_ID>
<SALARY>2001</SALARY>
<HIRE_DATE>31-DEC-2005</HIRE_DATE>
<JOB_ID>ST_CLERK</JOB_ID>
<EMAIL>PATHAK</EMAIL>
<LAST_NAME>PRATIK</LAST_NAME>
<DEPARTMENT_ID>20</DEPARTMENT_ID>
</ROW>
</ROWSET>';
BEGIN
insCtx := DBMS_XMLSTORE.newContext('EMPLOYEES'); -- Get saved context
DBMS_XMLSTORE.clearUpdateColumnList(insCtx); -- Clear the update settings
-- Set the columns to be updated as a list of values
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'EMPLOYEE_ID');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'SALARY');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'HIRE_DATE');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'JOB_ID');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'EMAIL');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'LAST_NAME');
DBMS_XMLSTORE.setUpdateColumn(insCtx, 'DEPARTMENT_ID');
-- Insert the doc.
rows := DBMS_XMLSTORE.insertXML(insCtx, xmlDoc);
--COMMIT;
DBMS_OUTPUT.put_line(rows || ' rows inserted.');
-- Close the context
DBMS_XMLSTORE.closeContext(insCtx);
END;
SELECT employee_id, LAST_name FROM employees WHERE employee_id = 114;
DECLARE
updCtx DBMS_XMLSTORE.ctxType;
rows NUMBER;
xmlDoc CLOB :=
'<ROWSET>
<ROW>
<EMPLOYEE_ID>114</EMPLOYEE_ID>
<LAST_NAME>PRABHU</LAST_NAME>
</ROW>
</ROWSET>';
BEGIN
updCtx := DBMS_XMLSTORE.newContext('EMPLOYEES'); -- get the context
DBMS_XMLSTORE.clearUpdateColumnList(updCtx); -- clear update settings
-- Specify that column employee_id is a "key" to identify the row to update.
DBMS_XMLSTORE.setKeyColumn(updCtx, 'EMPLOYEE_ID');
rows := DBMS_XMLSTORE.updateXML(updCtx, xmlDoc); -- update the table
DBMS_XMLSTORE.closeContext(updCtx); -- close the context
commit;
END;
Nowi want little modification on this above query like as i am passing static XML tags and i want it to pick the dynamic XML from web and use the XMLSTORE for the update.
and also for complex XML having 2-3 levels how this query needs to be changed.As i am new to this Oracle utillity any help from xepert will be a great help for me.
Thanks

Nowi want little modification on this above query like as i am passing static XML tags and i want it to pick the dynamic XML from webFrom a Web Service?
You'll need UTL_HTTP or HttpUriType interface to send the request and receive the XML response.
Search in the forum, there are already a lot of useful examples available.
and also for complex XML having 2-3 levels how this query needs to be changed.DBMS_XMLStore is OK for readily processing a canonical XML format (/ROWSET/ROW/COLUMN structure or alike).
However, if you have to deal with a more complex structure, you either have to :
- use a target object table that matches the XML structure
- preprocess the input document using XSLT to transform it to canonical format
That's why DBMS_XMLStore is not appropriate for multilevel documents, especially if they contain nested repeating groups.
In this case, XMLTable is a more flexible way of parsing the XML and process it relationally at the same time.
Depending on the size of the document, performance may be improved with schema-based object-relational storage.
For more help, please post a new thread in the {forum:id=34} forum, with the following information :
- database version (select * from v$version)
- a sample XML document (the complex one)
- DDL of your target table
- mapping between XML elements and columns (ie which tag goes to which column?)
- an XML schema (if you have one)

How do i keep itunes from creating a folder for each movie that I add to my library?

When I add a movie to my library, iTunes 10 creates a SubFolder to the iTunes Movies folder, for each movie I add. The older iTunes just added the Files to the Movies folder, whithout creating subfolders for each movie.
Is there a setting so that i can make version 10 do this?
Thanks,
Chuck

No, there is no custom setting for this. I wouldn't advise it, but if you really want you could downgrade to the older folder layout. However all your other folders will be arranged in the old layout too which may no be what you want.
See this old post of mine for more details. (Read the last bit first.)
tt2

Help creating a script for backup

Hi everybody,
I would like to make some backups using rman and recovery flash area on oracle10g on my Debian.
I would like to make a full backup level 0 on Sunday and make incremental backups from Monday to saturday.The best would be to have one for hot backup and one for cold backups.
But I am wondering how to schedule a task using rman. For example is it possible to write a script that would make the backups at a desired time executed by oracle?
Or do I have to create a script on unix that should be executed by cron?
You know I am really bad at scripting, but it would really help me if you could help me creating a script that would make the backup automatically on sunday at midnight and incremental eveydays until sunday.Here is the information I need to put in a script:
#flash recovery area creation under sqlplus
SQL> ALTER SYSTEM SET DB_RECOVERY_FILE_DEST_SIZE = 10g SCOPE=BOTH SID='*';
SQL> ALTER SYSTEM SET DB_RECOVERY_FILE_DEST = '/home/oracle/flash_recovery_area' SCOPE=BOTH SID='*';
#setting the default variable
ORACLE_SID=iscream;
#connect to target database:
rman TARGET SYS/oracle@iscream NOCATALOG
#set the defaults values for rman
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE RETENTION POLICY TO REDUNDANCY 2;
CONFIGURE BACKUP OPTIMIZATION ON;
Any help will be appreciated
synthese
hot backup
using rman
using flash_recovery_area
full backup set compressed on sunday
incremental backup set compressed from mondy to saturday
using disk
policy retenttion 7 days
redondance 2

You can backup using some unix shell scripts.
rman is not really good one.

Create ecatt script for one sales order creation with multiple line items

Hi ,
I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
This selection of data will be from an external file/ variants which will have only one row of data in it.
Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
Second: I have to create sales order for those many line items having same PO Number.
Best Regard
Taranum

Hi Micky
Firstl you should upload the Line items for a particular sales Order in an Internal table
and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
In case of any issues pls revert back
Reward points if helpful
Regards
Hitesh

Can i create different file for my movies

I need to create diferent file for movies, but i don't know how to do it

i want to creat like a play list but for movies, can i do that

Create a script for "when movie ends, go to new page in site"

Similar Messages

Maybe you are looking for