Create an Image Component that has a scale9Grid border
Hello, I want to start the process of creating a custom Image
Component that has a property of Scale9GridBorder, which upon
setting, will use Scale9Grid to create a frame around an image. I
was wondering if someone has any tips?
I'm familiar with custom components, all written in
Actionscript 3.0, and with the common createCHildren,
commitPorperties, measure, updateDisplayLIst mehtods that Ill have
to implement. I'm just not sure if classes like RectangleBorder,
etc. will be of help for me.
Maybe someone has already created a similar component?
Thanks,
Todd
I guess, where I'm getting stuck is trying to use scale9Grid
dynamically at runtime. Is this possible, or does scale9Grid only
work with embeded images? (I can't find any samples of runtime
setting a background image and then setting the innerRectangle of
scale9Grid.
THanks
Similar Messages
-
which is the best app to create cartoon images on that I can move around to other apps and animate. I want to create the image only, no background or anything
Hi Susan,
Kindly check out Flash pro CC
For more details: Explore Adobe desktop apps | Adobe Creative Cloud
Thanks,
Atul Saini -
I need to get photos off a water damaged iPhone 3GS. It spent time underwater, saltwater. I let it dry for a week, turned it on, the apple symbol came on, then it died. I need to retrieve my photos off it. Can I take out the component that has the photos (is this the main board?) and put it into another of the same phone to retrieve the photos? Please help
You're talking about the logic board. The two most likely things to get toasted, with water damage, are the battery(it shorts out), & the logic board. The worst water damage would be salt water. I'm afraid your logic board is toast.
-
Hello,
Recently, I had a task where I needed to install a custom non-signed driver onto my Windows 8 64-bit setup. As it is known, Windows has driver enforcement policies that, as a security measure, do not allow you to install non-signed drivers.
I did not want to alter my current boot configuration so I decided to create a separate boot entry that would have driver signing policies disabled. For some reason I did not find any good source that would contain a step-by-step instruction on completing
this task, so I decided that I'd better share my experience here.
Lastly, there are multiple ways how you could turn off driver enforcement policies, but I find the way to do this via boot manager.
Here's how you can do that.
1. Press WindowsKey and type 'cmd' (without quotes) to find Command prompt, then click Command prompt icon. If you have User Account Control turned on, hold Ctrl+Shift keys pressed when clicking the icon.
This will force Windows to ask you for elevation of command prompt. Elevation is necessary for editing Boot Configuration Database (BCD), the database used by Windows boot manager to store boot settings.
2. In the User Account Control window click Yes to confirm elevation of command shell.
3. At the command prompt type
bcdedit
to list your BCD entries.
This will give you an output like:
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
The section that starts with Windows Boot Manager lists current settings for the boot menu. Here you find what boot entry is chosen by default, this is the one what you will boot into if you do not select any boot entry in the
boot menu.
The following record
default {current}
indicates that by default my Windows boots into configuration which I use at the moment (currently booted Windows configuration).
To find out what exactly is current configuration, look into the list of boot entries, records that contain boot loader configuration and are titled as Windows Boot Loader in the bcdedit output.
For example, the entry shown above is one of my boot configurations. This is one of the boot entries listed on the boot manager screen when I start my PC and it looks like:
Windows Boot Loader
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8prowmc01.vhdx
path \Windows\system32\winload.efi
description Windows 8
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5d1-fb29-11e1-a74d-f2c962d62240}
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8prowmc01.vhdx
systemroot \Windows
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
This record has a unique GUID identifier that can be used to reference this boot entry, which is:
identifier {a329b5d0-fb29-11e1-a74d-f2c962d62240}
If we look at the Windows Boot Manager settings, we'll see this entry is the first in order to be displayed in the boot menu on OS start (I marked the unique bits):
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
It references my VHD drive, a virtual hard drive where my Windwos 8 setup is residing:
device vhd=[D:]\win8prowmc01.vhdx
And it also specifies that the boot manager must use UEFI BIOS extension code to access my Windows boot partition:
path \EFI\Microsoft\Boot\bootmgfw.efi
3. Now locate the current boot entry.
Current boot entry contains boot settings used to boot into Windows configuration to which you are currently booted. It is referenced in the list of boot entries as a Windows Boot Loader record that has the {current} keyword inside and may
look like:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Because we are more than happy with current configuration and want to base our new boot configuration on these settings, we need to copy this boot entry ({current}) to a new boot entry.
This is done by running the following command:
C:\Windows\system32>bcdedit /copy {current} /d "No Driver Signature Check"
Parameter /d here indicates that the following sequence of characters specifies the display name for the new boot entry that we are creating. The name inside the double quotes will be displayed in the boot menu when you boot your Windows.
In other words, if you know restart your system, you'll see the new No Driver Signature Check in the boot menu.
When copied, the entry is automatically given a new GUID identifier, so upon running the command above, you'll see the following line returned (you'll have an other GUID since these are unique identifiers):
The entry was successfully copied to {a329b5d8-fb29-11e1-a74d-f2c962d62240}.
4. Make sure the entry has been successfully created.
Run the same bcdedit. (You may specify /enum or /v, or both /enum /v parameters at the prompt to get more detail about boot entries, but simple bcdedit is just enough to see the new entry):
C:\Windows\system32>bcdedit
Windows Boot Manager
identifier {bootmgr}
device partition=\Device\HarddiskVolume2
path \EFI\Microsoft\Boot\bootmgfw.efi
description Windows Boot Manager
locale en-US
inherit {globalsettings}
integrityservices Enable
default {current}
resumeobject {a329b5cf-fb29-11e1-a74d-f2c962d62240}
displayorder {a329b5d0-fb29-11e1-a74d-f2c962d62240}
{a329b5cc-fb29-11e1-a74d-f2c962d62240}
{a329b5ca-fb29-11e1-a74d-f2c962d62240}
{a329b5c2-fb29-11e1-a74d-f2c962d62240}
{current}
{a329b5d8-fb29-11e1-a74d-f2c962d62240}
toolsdisplayorder {memdiag}
timeout 30
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
The entry has been created and given a unique a329b5d8-fb29-11e1-a74d-f2c962d62240 ID. It now has exactly same boot settings as the boot entry we used to boot into current configuration of Windows.
5. Modify created No Driver Signature Check entry and specify that Windows must have driver integrity checks disabled when booted using this boot entry.
Any modifications to boot entries are made using /set parameter. To indicate that we modify a specific boot entry, we must specify the GUID for the No Driver Signature Check record, which is:
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
In other words, to edit (add or change) an option for the boot entry, we need to use the following command syntax:
C:\Windows\system32>bcdedit /set GUID <boot_option> [<option_value>]
First, we must specify that we don't want integrity checks be made. This is done by adding the loadoptions option and setting it to DISABLE_INTEGRITY_CHECKS value:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} loadopti
ons DISABLE_INTEGRITY_CHECKS
The operation completed successfully.
6. Verify that load option has been added.
Run the bcdedit command:
Windows Boot Loader
identifier {current}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description Windows 8 Enterprise RTM
locale en-US
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
7. Add the option that turns on test signing mode and disables checks of driver signature.
Adding the testsigning option and setting it to ON does the trick for us:
C:\Windows\system32>bcdedit /set {a329b5d8-fb29-11e1-a74d-f2c962d62240} TESTSIGNING ON
8. Now we have a boot entry that enables Windows not to do integrity checks and digital signature validation.
We check it by running bcdedit:
Windows Boot Loader
identifier {a329b5d8-fb29-11e1-a74d-f2c962d62240}
device vhd=[D:]\win8rtm.vhdx
path \Windows\system32\winload.efi
description No Driver Signature Check
locale en-US
loadoptions DISABLE_INTEGRITY_CHECKS
inherit {bootloadersettings}
recoverysequence {a329b5c3-fb29-11e1-a74d-f2c962d62240}
integrityservices Enable
recoveryenabled Yes
testsigning Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice vhd=[D:]\win8rtm.vhdx
systemroot \Windows
resumeobject {a329b5c1-fb29-11e1-a74d-f2c962d62240}
nx OptIn
bootmenupolicy Standard
hypervisorlaunchtype Auto
9. Type 'exit' without quotes to exit from command prompt, and restart Windows.
Upon booting you will be present with a new boot option to start Windows in configuration that allows you to install custom non-signed drivers.
Hope this will help anybody to create their own custom boot configurations.
Well this is the world we live in And these are the hands we're given...Hi,
Thank you for sharing the solutions & experience here. It will be very beneficial for other community members who have similar questions.
Regards,
Kelvin hsu
TechNet Community Support -
How to create a ROLAP Cube that has two fact tables.
I want to know if it is possible to create a ROLAP Cube with two fact tables.
Suppose that I have these two star schemas:
The first star schema has only a measure and a time dimension. The time dimension has three levels (Year -> Month -> Day)
The second star schema has the same measure of the first schema and a time dimension. In this schema the time dimension has only two levels (Year -> Month). The values of the measure of this schema come from the first schema, this is, the value of the measure for a defined year and month results of the sum of all fact values of the first schema, that have the same year and month.
I want to know if is possible to create a ROLAP cube that can get the information of the two star schemas, according to the level that the user are consulting.
For example, if the user consults the cube with "OracleBI Spreadsheet Add-In", and if the user is consulting the first two levels (Year and Month), then the ROLAP cube would get the information of the second star schema.
But if the user does a drill down in a month to get information of the days, then the ROLAP cube would get the information of the first star schema.
Is it possible to do this?
Regards,
Rui TorresI'm not exactly sure what you want to do. Sorry if I get this wrong.
You have two fact tables, one with data values at the day, month and year levels and a second fact table with data values at just the month and year levels. If this is the case, in the CWM2 APIs or OWB Paris, you would create a view that joins the two tables together and then map this view to the ROLAP cube.
For CWM2 details, please refer to the Oracle OLAP Reference. -
Can you create an image map that will link to a different element on the same page?
I have used image maps before and know how to create an image map to link to a new page. In this case, however, I want to be able to click on my image using an image map and load a new image with text on the same page as the image map. Is this even possible? Is there some sort of behavior that allows you to create same-page links, perhaps using AP divs? I want the end result to be a type of gallery that loads different images depending on where you click on the main image.
Again, I don't even know if this is possible. Any suggestions on how to make this work would be greatly appreciated.
Thank you!Go to this site and mouse over the image map of South America.
http://alt-web.com/testing.html
Is that what you are looking for?
Insofar as linking to a position on the same page, do a Help search (F1) in DW for "named anchors."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
When we create a Purchase order that has PIR in line item, the text is stored in EINA or EINE?
Hi Friends,
I have a requirement that, whenever we created the PO that has PIR in line item, the text is getting stored in EINA or EINE table.
so here the businees need to move the text which storing in EINA / EINE to ekpo text id up on saving.
please suggest how i need to proceed with this issue.
Thanks in Advance,
kasi.Hi Madan,
Thank you for your reply.
As per your suggestions I found BADI ME_PROCESS_PO_CUST.
Could you please help me how to read the "Info record PO text" for each line item in the purchase order and i want to save the readed text into EKPO-txz01.
Thanks in Advance,
kasi. -
Creating a brochure/booklet that has one page that folds out?
Hello,
I am trying to use Indesign for the first time, I have created a travel brochure that is around 30 pages (3.75" * 8.375")
anyway I need one of the pages to fold out so the final unfolded page would be 3.75 * 3, with print on front and bak... how?
Thank you,Your example is missing....
You have to ways:
1. Create separate file for cover and make it dfferent size. That´s actually good way if you use different paper for cover, thicker or glossier etc. Because then your printhouse has to print it separately anyway.
2. Use so called "Island Spread" which means create extra pages for your foldout (one for both sides), uncheck Allow Documents Pages to Shuffle from Pages panels menu and drag your 1. foldpagethumbnail in Pages panel to coverpage´s thumbnail so it docs to it. Do the same thing for your second foldpagethumbnail/backcoverpages thumbnail... -
How can I use an activeX component that has no creatable objects
I have got an activeX component that I want to use with LabVIEW. When I want to access that activeX component via LabVIEW I see no creatable objects from that component. If I select one of the non creatable objects, everything seems to be fine and I can build my application. I can see all properties and methods of the object as expected. But when I start the application it fails with error 3005 saying 'object specified is not creatable...'. Does anyone know a solution for this problem?
Thanks
RainerDid you ever resolve your problem?
I am having exactly the same problem. I want to use labview 7.0 to control a 3rd party's application (which controls a lab instrument). I can see all the methods and properties I need, but only if I uncheck "show creatable objects only" on the relevant type library.
I have a working visual basic (as an xls macro) example of how to control the 3rd party application and it uses the non-creatable objects quite happily.
But in the VB example VB first uses GetObject to connect to a running instance of the 3rd party's application using GetObject. As I understand it, this checks the Running Object Table (ROT) to return an interface pointer.
"COMNAME" in the GetObject (, COMNAME) used in the VB application I can see listed in the Windows registry, but cannot find it (and I have looked!) anywhere in the "select object from type library" navigation dialog window.
I think it is because they are dependant objects, but how to I generate an automation refnum for them if I can't find the higher level object? Perhaps I should use CINs? -
How do I create an excel file that has the volume output and the time at which it occured?
Hello:
I am using Labview to control a New Era Pump Systems automatic syringe pump and to record diameter measurements from a LaserMike optical comparator. My program is fully functional, the code is attached with all auxilliary files in the NE-50X folder. I mostly understand my program, I used drivers for the NE-50X pump found on the NI website to build my code and added to it as needed.
If anyone has ideas about how to do any of these three things, your help is greatly appreciated. I have the output from the syringe pump going into a line graph while I run the test with the time on the x-axis and volume on the y-axis. How would I be able to create an excel file from this information? I would like the excel file to have the time in one column and the volume at that time in the next column. I though that I had wired it correctly, however I feel that the time seems to be a little off and very exact. Attached is the block diagram of what I have done.
Hello:
If anyone has ideas about how to do any of these three things, your help is greatly appreciated.
Attachments:
RATETEST.vi 202 KBLet me start by answering the specific question, and then I will provide some suggestions on the code.
The function you want is the "Write to Spreadsheet File", which you're already using, albeit in a confusing means (more later). I was not able to find any place in your code where you're actually acquiring time information, so I don't understand your comment about the time not being exact. (I'm assuming you mean "not", even though that word was not in your actual sentence.)
As for the code:
As I mentioned, you're using the "Write to Spreadsheet File" twice, as well as the "Write to Measurement File" Express VI. All three seem to be logging the same information, though one of the "Write to Spreadsheet File" functions is logging some sort of volume and diameter information. Please pick one.
You're looping around the path for one of the "Write to Spreadsheet File" functions, but not for the other two functions. Why are you looping the path in the first place?
You' re continuously accruing data into an array to put onto an XY Graph. Please keep in mind that this means the program will slow down as it progresses as this array gets larger and larger, and LabVIEW needs to shuffle memory around. Depending on how fragmented your memory is, you may find the program will crash since LabVIEW cannot allocate a large enough contiguous block of memory for the array.
Your wiring really needs to be cleaned up. Tip: Right-click on a wire and select "Clean Up Wire".
In the middle of the diagram you have a case structure in which the True part has a single iteration loop that's adding 1 to the iteration and updating some local variable, and in the False part you're doing something else with it. I have no idea what you're trying to do, but surely there must be a better way to do it.
You seem to have two tank indicators on top of each other on the front panel and then flipping the visibility of them based on some value. I would think that it would be easier to simply display both at the same time, no? As a user, I would find it somewhat perturbing to see the tanks appear and disappear. -
How to create an image banner that slides left to right with mouseover?
I need to create a web banner like the one on the following site: www.gracelandbaptist.org. I have been unabe to find anything on how to create such a banner. I believe it was created in flash but am not sure. I want my banner to work in the same fashion so that as the mouse is moved from left to right the banner will slide appropriately. Its possible that some java script might also have been used with flash. If someone could point me in the right direction I would be most grateful. Thank you.
dejawhooIt is a Flash design and is unlikely javascript is involved with the interaction. There are probably a couple of ways to approach such a design, but if you have no experience with Flash, you will probably struggle to create it. The basics involve place the different images in a movieclip and controlling the horizontal position of that movieclip based on mouse interaction/position. THe position controls are based on what values are needed to have a particular section of the movieclip occupy the main section of the viewing area. Actionscript Tweens are probably employed to manage the position transitions.
-
Hi Everybody,
I need an iPad app that can open an image and has a Magic Wand-type tool so I can select white background around a subject. Then delete the white areas so it becomes transparent. Then save as a PNG with transparency. I've tried Pixelmator...I can select the white but I can not delete the white. I downloaded Photoshop Express...no magic wand tool.
Does anyone have any recommendations?
Thanks,
GaryIt's a shame you don't have Mac. The feature is built in the system (in Preview, Pages, etc).
That makes me think: this feature should be in the iPad iWork apps too (Pages and keynote): check out this guide: http://www.cultofmac.com/256475/knock-out-those-backgrounds-instant-alpha-hidden -in-pages-for-ipad-ios-tips/ -
How do i create an adobe form that has auto numbering?
Our purchasing department requires a Purchase Requisition that contains it's own unique number so the requisition can be associated with the Purchase Order. Can this type of form be created using Adobe Acrobat?
I need to create the form below and have the requisition number field auto populate and never generate a duplicate.
-
Create OLE DB synthetic that has failover ability if proxy is down much like resource pools
As the title indicates, I would like to create a monitor that is fault tolerant and queries an OLE DB datasource. Today you can target multiple agents to perform a synthetic transaction using the OOB templates, however I only want a single agent
performing the query at any given time. If the primary proxy/agent is down, I would like the synthetic transaction to failover to the other proxy node(s). This behavior is like network or unix/linux devices which use resource pools.You must create unhosted class or it can be unhosted singleton class (group) and target your monitor on this class.
Vladimir Zelenov | http://systemcenter4all.wordpress.com
I assume I would then create a rollup monitor so that I don't trigger an alert should one proxy be down or experience a technical issue. -
How to make images slideshow that has zoom in/out transition
Hi people,
I have around 30 images that I want to do a slideshow, whereby I show the images one by one, formed a circle, after showing all the images, it zooms out to show a logo.
Any suggestion or tutorial for me? I am very sorry for troubling. This is my 1st time of using Adobe Premiere Pro CS4.
Thanks and Regards,Welcome to the forum.
As Stanley points out, it appears that you are doing two things: PiP to start, and then animating via Keyframes for the fixed Effects>Motion>Scale, and probably Motion>Position. The "revealing" of the logo can be done by Keyframing various Effects, such as the fixed Effect>Opacity, or perhaps Keyframing an added Effect, such as Blur/Gaussian Blur.
Reading on both "Picture in Picture," and then "Keyframes" will be a great starting point. The concept of Keyframes is a bit abstract at first, but once you get that concept, you will find it so very useful for many things, so the study time will pay big dividends. Most Effects can be Keyframed directly, and a few more, indirectly. Various different Effects can be Keyframed separately, so that many things can happen over time, in a coordinated "dance." The uses and applications are virtually limitless, and provide so much power, plus aesthetic choices.
Good luck, and I would start with Stanley's links, and do as much reading, and exprimenting, as is possible. One great resource is the Adobe Classroom in a Book Premiere CS5, Adobe Press. The author covers Keyframing Effects in great detail, plus PiP. Remember, once you understand Keyframes, you will use them constantly, even for adjusting Audio Volume over time.
Good luck,
Hunt
Maybe you are looking for
-
How do you use the same wireless keyboard with multiple devices?
My apologies in advance if this question has been answered previously. There was nothing in the owner's manual (for the keyboard) that answered this. I did do a rough search that did not yield an answer to this: I have one wireless keyboard I am us
-
This is the message I get when I attempt to open statements from my online bank: We're sorry, but it appears as though your browser doesn't have a plug-in available to handle the document requested. If you are using a MAC with Firefox, please try thi
-
Trouble with socket gateway and an as3 xmlsocket connection
I succesfully set up the socket gateway and am able to conect to the CF socket gateway and send data from flash to the gateway. The error I keep getting is when I add return value to the "onIncomingMessage"... cf error always logs "Cannot send outgoi
-
How to split the business areas
hi experts, i am having 500 to 600 business areas. my requirement is i want to split the g/l account, company code and amount data correspondingly. please help to solve the problem.
-
We have branches that are using Middle Tier for ZfD services. They are using workstations newly imaged with W2K Sp4 and, once imported, they cannot be remote controlled. The WMAuth.exe shows that the workstation is not authenticated, when run against