Create and insert into temporary table

Dear all,
I want to create an temporary table and insert data from select statement and order data by field in that table, at the end i want to drop temporary table.
CURSOR rob_twin
IS
SELECT t.tarj, s.b24, date, status, fii, acnt, mbr, pviv, type
FROM
p6.tarj t
p6.stb24 s
p6.cuet c
WHERE .......
--now I want to create table and insert above data (from cursor rob_twin)
--after that I need to order data by t.tary from new table
--finally I want to drop this table
Thank you for your help.
Regards,
Robert

The point is in Oracle you do not create the temporary table at run-time, use it, and drop it again.
But you can create a GTT (Global Temporary Table) once and then it stays in the data dictionary, just like a normal table. The "temporary" part is simply that the data is temporary, can only be seen in this one session, and will go away either on commit or when the session ends.
So first you create a global temporary table with the columns you wish. Using either ON COMMIT DELETE ROWS or ON COMMIT PRESERVE ROWS you decide whether data in this GTT should survive across transactions or not.
Your logic could then be to populate this GTT with data from your remote database using INSERT INTO gtt_table SELECT ... FROM ...@dblink
Then work with that data in the GTT as you would with any normal local table
And finally either you simply commit your transaction and the data in the GTT goes away (if you did ON COMMIT DELETE ROWS), or you just DELETE gtt_table.
You do not continually create and drop a GTT. The table definition is permanent - it is only the data that is temporary.
Edit:
PS: As Karthick stated above - for almost any usual purposes it is likely to be possible to solve the problem without having to use GTT's. Usually even with db_links it can be done with suitable SQL and joins without having to use a GTT. But if that turns out to be one of those rare occasions where that is hard - then the above is the way to go ;-)
Edited by: Kim Berg Hansen on Sep 19, 2011 1:38 PM

Similar Messages

How to read ecel sheet and insert into oracle table

hi all,
am working on forms builder 6i. and i want , from a trigger to read from a a sheet excel file the data and insert into a table that i had aleady created.
i whrite a code that can till now open the excel file but i cant read the data to insert it into the table.
am using TEXT_IO.IS_OPEN to open the file
TEXT_IO.GET_LINE to take each line
and subst(x as variable) to read the first line , but the subsrt return nohing
any solution??

There's already a topic made on this: how to copy data from excel to oracle forms

How to extract data from xml and insert into Oracle table

Hi,
I have a large xml file. which will have hundreds of the following transaction tags having column names and there values.
There is a table one of the schema with coulums "actualCostRate","billRate"....etc.
I need to extract the values of these columns and insert into the table
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuUK" chargeCode="LCOCD1" externalID="L-RESCODE_UK1-PROJ_UK_CNT_GBP-37289-8" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-12" transactionType="L" units="11" taskID="5017601" inputTypeCode="SALES" groupId="123" voucherNumber="ABCVDD" transactionClass="ABCD"/>
<Transaction actualCostRate="0" billRate="0" chargeable="1" clientID="NikuEU" chargeCode="LCOCD1" externalID="L-RESCODE_US1-PROJ_EU_STD2-37291-4" importStatus="N" projectID="TESTPROJ" resourceID="admin" transactionDate="2002-02-04" transactionType="L" units="4" taskID="5017601" inputTypeCode="SALES" groupId="124" voucherNumber="EEE222" transactionClass="DEFG"/>

Re: Insert from XML to relational table
http://www.google.ae/search?hl=ar&q=extract+data+from+xml+and+insert+into+Oracle+table+&btnG=%D8%A8%D8%AD%D8%AB+Google&meta=

Fetch data from one table and insert into two tables in desired format

I have similar to the following data in a table and it is not normalized. The groupID is being used to group two records of similar nature.
DECLARE @OldDoc TABLE (oldDocID INT, groupID INT, deptID INT)
INSERT INTO @OldDoc (oldDocID, groupID) VALUES (1, NULL, 111),(2,NULL,111),(3,1,111),(4,NULL,333),(5,1,222),(6,NULL,333),(7,2,222),(8,2,333),(9,NULL,111),(10,3,222),(11,NULL,333),(12,3,444)
I need to process the data from the above table (@OldDoc) and write into two new tables (@NewDoc and @NewDocGroup) as follows.
oldDocID should be stored as newDocID when inserting to @NewDoc table. Only records with groupID NULL and one record (first one) per group should be considered (For example, oldDocID 5 is not considered as 3 and 5 belong to the same groupID 1) for insertion.
DECLARE @NewDoc TABLE (newDocID INT)
INSERT INTO @NewDoc (newDocID) VALUES (1),(2),(3),(4),(6),(7),(9),(10),(11)
All records from @OldDoc should be considered for insertion into @NewDocGroup table. OldDocID is inserted as NewDocID and deptID is as-is. Instead of groupID, the ID of the first record in the
group should be considered as parentNewDocID (For example, 3 is considered as parentNewDocID for newDocID 5 as 3 and 5 belong to the same groupID in @OldDoc table) for the newDocID.
DECLARE @NewDocGroup (newDocID INT, parentNewDocID INT, deptID INT)
INSERT INTO @NewDocGroup (newDocID, parentNewDocID, deptID) VALUES (1,1,111),(2,2,111),(3,3,111),(4,4,333),(5,3,222),(6,6,333),(7,7,222),(8,7,333),(9,9,111),(10,10,222),(11,11,333),(12,10,444)
How do I accomplish the above using SQL ? Thanks for the help.

>> I have similar to the following data in a table and it is not normalized. The group_id is being used to group two records [sic] of similar nature. <<
Rows are not records. Tables have to have a key by definition. You do not do math with identifiers, so they should not be numeric. Let's ignore that error for now. In short, you are posting garbage. If you had followed Forum Netiquette, would you have posted
this?
CREATE TABLE Old_Documents
(old_doc_id INTEGER NOT NULL PRIMARY KEY,
group_id INTEGER,
dept_nbr INTEGER NOT NULL
REFERENCES Departments (dept_nbr));
INSERT INTO Old_Documents(old_doc_id, group_id, dept_nbr)
VALUES (1, NULL, 111),
(2, NULL, 111),
(3, 1, 111),
(4, NULL, 333),
(5, 1, 222),
(6, NULL, 333),
(7, 2, 222),
(8, 2, 333),
(9, NULL, 111),
(10, 3, 222),
(11, NULL, 333),
(12, 3, 444);
>> I need to process the data from the above table (Old_Documents) and write into two new tables (New_Documents and New_Documents_Groups) as follows. <<
Just like punch cards and mag tape data processing! Being old and being new are a status, not another kind of entity. But that is how mag tapes work. And you even use the verb "fetch" from tape files. This design flaw is called attribute splitting.
Do you have a Male_Personnel and Female_Personnel table? NO! It is just Personnel!
>> old_doc_id should be stored as new_doc_id when inserting to New_Documents table. Only records [sic] with group_id NULL and one record [sic] (first [sic; no ordering in a table] one) per group should be considered (For example, old_doc_id 5 is not considered
as 3 and 5 belong to the same group_id =1) for insertion. <<
Think about your punch card mindset. Why did you physically materialize that redundant New_Documents table? Let me answer that: this is how you work with punch cards! In SQL we use a VIEW:
CREATE VIEW New_Documents (new_doc_id)
AS
SELECT old_doc_id
FROM Old_Documents;
>> All records [sic] from Old_Documents should be considered for insertion into New_Documents_Groups table. The old_doc_id is inserted as new_doc_id and dept_nbr is as-is. Instead of group_id, the ID [sic: which identifier??] of the first [sic: tables
have no ordering like a deck of punch cards] record [sic] in the group should be considered as parent_new_doc_id (For example, 3 is considered as parent_new_doc_id for new_doc_id 5 as 3 and 5 belong to the same group_id in Old_Documents table) for the new_doc_id.
<<
Why not use 5 as the parent? My guess is that you are trying to form equivalence classes. See:
https://www.simple-talk.com/content/print.aspx?article=2020
--CELKO-- Books in Celko Series for Morgan-Kaufmann Publishing: Analytics and OLAP in SQL / Data and Databases: Concepts in Practice Data / Measurements and Standards in SQL SQL for Smarties / SQL Programming Style / SQL Puzzles and Answers / Thinking
in Sets / Trees and Hierarchies in SQL

Link and insert into 2 tables

Hi Everyone,
I am building an application that that contains information about helpdesk calls. I am using 2 tables:
Table 1 contains tracking info- TRK_CALLS
ID -primary key
USER_
ASSIGNED_TO
PROBLEM
SOLUTION
STATUS
EDIT
Table 2 contain date and time info - TRKCALLS_TIME
ID - primary key
CALL_ID - same number as ID in table 1
DATE_
TIME
I have taken the advice that Denes Kubicek gave another poster and created a workspace at apex.oracle.com and places my app in there for others to look at
workspace: kjwebb
username: [email protected]
password: gtmuc
application: calltracking2
I have a report called create/edit call tracking in there that I can either Edit or create an entry into TRK_CALLS. clicking create takes me to a form, after info is entered I have a create button that assigns the PK and inserts info into TRK_CALLS. I then have to click Edit Call Time button to input info on a form that inserts into TRKCALLS_TIME table. I would like to link these tables somehow so that when I go to the (Edit Call Time) form the Call ID is populated with the PK ID from the TRK_CALLS table.
It would be easier to insert this info all in one page but I worked on that for a long time before giving up because I could not get anything to insert into the tables so I have taken this route.
The basic desired outcome is to tie the tables with a PK, ID in table 1 and CALL_ID in table 2. So that they correspond and displayed on the report page.
Please help in any way you can and make changes to my app.
I would not be asking for help unless I have reached the ends of my apex knowledge.
Thanks and please let me know if there are any questions,
Kirk

I can imagine it is pretty obscure when your knowledge of PL/SQL is not (yet) so big.
The statement I wrote ar meant exactly for your situation.
OK, here we go:
First you have created a view in the Object Browser. Suppose it is called trkcalls_view .
Then you go to SQL Workshop > SQL Commands.
You cut the next statement and paste it in the upper white part of the screen, just under the autocommit checkbox. Replace the bold sequence references by the real name of the sequences that are used to populate the ID's of the two tables.
You say Run and the trigger is created.
A trigger on the view is created. Creation of such a trigger is not possible in the Object Browser, so I understand your confusion. This triggers performs when an insert in the view is performed. As you might see in the code, it creates seperate insert statements for both tables.
CREATE OR REPLACE TRIGGER bi_trkcalls_view
INSTEAD OF UPDATE ON trkcalls_view
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
v_id number;
bv_id2 number;
BEGIN
select sequence1.nextval into v_id from dual;
select sequence2.nextval into v_id2 from dual;
INSERT INTO TRK_CALLS
( ID
, USER_ASSIGNED_TO
, PROBLEM
, SOLUTION
, STATUS
, EDIT
VALUES
( v_id
, :new.user_assigned_to
, :new.problem
, :new.solution
, :new.status
, :new.edit
insert into TRKCALLS_TIME
( id
, call_id
, date_time
values
( v_id2
, v_id
, :new.date_time
end;
END ;good luck,
DickDral

XSQL and insertion in temporary table: seems not to work

Using XSQL 9.0.2.0.0 and 9i Database.
XSQL does not really inserts rows in temporary table.
Given a regular table and a temporary table:
create table toto (id number, name varchar2(30));
create global temporary table toto_tmp
on commit delete rows as
select * from toto where 1=2;
-- XSQL database connection is set to <autocommit>false</autocommit> in XSQLConfig.xml
-- XSQL insertion in regular toto table:
-- with commit-batch-size="0" xsql:insert-request does not issue commit:
<xsql:insert-request commit-batch-size="0" table="toto" transform="params.xsl"/>
<xsql:dml>
begin
-- PL/SQL processing
commit;
end;
</xsql:dml>
-- Data inserted in table TOTO are "seen" from the XSQL:DML block
But if inserting in temporary table TOTO_TMP using:
<xsql:insert-request commit-batch-size="0" table="toto_tmp" transform="params.xsl"/>
the XSQL:DML do not see the inserted rows !
This works as if commit-batch-size="0" had no effect when using temporary table!
Thank you for help.

Hi Subhash,
thanks for your help.
We are on AIX on our database sever and using Oracle 11.
Our app servers are using on Linux.
Best regards
Carlos

Best Practice to fetch SQL Server data and Insert into Oracle Tables

Hello,
I want to read sqlserver data everry half an hour and write into oracle tables ( in two different databases). What is the best practice for doing this?
We do not have any database dblinks from oracle to sqlserver and vice versa.
Any help is highly appreciable?
Thanks

Well, that's easy:
use a TimerTask to do the following every half an hour:
- open a connection to sql server
- open two connections to the oracle databases
- for each row you read from the sql server, do the inserts into the oracle databases
- commit
- close all connections

Fetch data from two tables and insert into one table

I have similar to the following data in two tables (@Plant, @PlantDirector) and need to consolidate into one table (@PlantNew) as follows.
DECLARE @Plant TABLE (PlantID INT, PlantName VARCHAR(100))
INSERT INTO @Plant (PlantID, PlantName) VALUES (1, 'Name One'),(2, 'Name Two'),(3, 'Name Three'),(4, 'Name Four'),(5, 'Name Five'),(6, 'Name Six')
Director data for the Plants exist in the following table. Assistant value 1 means Assistant Director and 0 means Director.
Data exists only for subset of plants and a Plant may have one or both roles.
DECLARE @PlantDirector TABLE (PlantID INT, PlantDirectorID INT, Assistant bit)
INSERT INTO @PlantDirector (PlantID, PlantDirectorID, Assistant) VALUES (2, 111, 1),(2, 222, 0),(4, 333, 0),(6,444,1)
The above data needs to be inserted into one table (@PlantNew) as follows:
PlantID in @Plant table is IDENTITY value and needs to be inserted as-is into this table.
PlantDirExists will get a value of 1 if at least one record exists in @PlantDirector table for a PlantID. PlantAssistantDirID and PlantDirID should be set to the corresponding PlantDirID or NULL appropriately depending on the data.
DECLARE @PlantNew TABLE (PlantID INT, PlantName VARCHAR(100), PlantDirExists bit, PlantAssistantDirID INT, PlantDirID INT)
INSERT INTO @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
VALUES (1, 'Name One', 0, NULL, NULL),(2, 'Name Two', 1, 111, 222),(3, 'Name Three', 0, NULL, NULL),(4, 'Name Four', 1, NULL, 333),(5, 'Name Five', 0, NULL, NULL),(6, 'Name Six',1, 444, NULL)
How do I achieve the above using SQL ? Thanks.

like this
INSERT @PlantNew (PlantID, PlantName, PlantDirExists, PlantAssistantDirID, PlantDirID)
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
@PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
You're missing a FROM
insert into @PlantNew
SELECT p.PlantID,
p.PlantName,
CASE WHEN pd.PlantID IS NULL THEN 0 ELSE 1 END,
PlantAssistantDirID,
PlantDirID
FROM @Plant p
LEFT JOIN (SELECT PlantID,
MAX(CASE WHEN Assistant = 1 THEN PlantDirectorID END) AS PlantAssistantDirID,
MAX(CASE WHEN Assistant = 0 THEN PlantDirectorID END) AS PlantDirID
from @PlantDirector
GROUP BY PlantID)pd
ON pd.PlantID = p.PlantID

Read data from E$ table and insert into staging table

Hi all,
I am a new to ODI. I want your help in understanding how to read data from an "E$" table and insert into a staging table.
Scenario:
Two columns in a flat file, employee id and employee name, needs to be loaded into a datastore EMP+. A check constraint is added to allow data with employee names in upper case only to be loaded into the datastore. Check control is set to flow and static. Right click on the datastore, select control and then check. The rows that have violated the check constraint are kept in E$_EMP+ table.
Problem:
Issue is that I want to read the data from the E$_EMP+ table and transform the employee name into uppercase and move the corrected data from E$_EMP+ into EMP+. Please advise me on how to automatically handle "soft" exceptions in ODI.
Thank you

Hi Himanshu,
I have tried the approach you suggested already. That works. However, the scenario I described was very basic. Based on the error logged into the E$_EMP table, I will have to design the interface to apply more business logic before the data is actually merged into the target table.
Before the business logic is applied, I need to read each row from the E$EMP table first and I do not know how to read from E$EMP table.

Build a sql query fro different table and insert into a table

Hi I have a requirement ,
i have some table 1 table which holds rules which rules i have to apply on the sql query
2 table will hold table name and column name and transformation
with these help of 2 tables i want to build a sql quey and the sql query need to be insert into another table.

Hi Karthick,
I am not going to build Dynamic Data Model.
i already have table 1 contains rules let's say COUNT,
and another table contain source table name , column name , Target table name, Source Table name like that
so with the help of these 2 tables i want to build Sql query and going to insert into 3rd table.

Direct Path Insert into temporary table

Hi,
I made the following experiment (temp_idtable is a temp table with a single column id, V_PstSigLink is a complex View):
14:24:28 SQL> insert into temp_idtable select id from V_PstSigLink;
17084 Zeilen wurden erstellt. (in english: rows inswerted)
Statistiken
24 recursive calls
52718 db block gets
38305 consistent gets
16 physical reads
4860544 redo size
629 bytes sent via SQL*Net to client
553 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
4 sorts (memory)
0 sorts (disk)
17084 rows processed
14:24:41 SQL> commit;
Transaktion mit COMMIT abgeschlossen.
14:25:29 SQL> insert /*+ APPEND*/into temp_idtable select id from V_PstSigLink;
17084 Zeilen wurden erstellt. (in english: rows inswerted)
Statistiken
1778 recursive calls
775 db block gets
38847 consistent gets
40 physical reads
427408 redo size
613 bytes sent via SQL*Net to client
565 bytes received via SQL*Net from client
3 SQL*Net roundtrips to/from client
27 sorts (memory)
0 sorts (disk)
17084 rows processed
As you can see, with /*+ APPEND*/ there will be much less REDO generated.
How can it be?
1. /*+ APPEND*/ only doesn't mean that there shouldn't be REDO generated, does it? For that one has to declare the table with NOLOGGING.
2. In the doc there is a statement that for temp. tables there is no REDO log generated, just UNDO (and REDO only for UNDO).
Where is the difference coming from?
If I use Direct Path (APPEND) for a temp table, where will be the table populated - in the Buufer Cache or directly in a temporary segment on the disk?
Balazs

Hi John,
I'm a little confused about your statement " Oracle does not cache data blocks until they are read from a table.". I wanted to make a little experiment with KEEP Buffer Cache to see weather I can 'pin' the content of a temp table. But before getting to pin I realized an interesting behavior. Please see this sqlplus log:
SQL> create global temporary table temp_ins(id NUMBER);
Table created.
SQL> insert into temp_ins values (1);
1 row created.
SQL> insert into temp_ins values (2);
1 row created.
SQL> insert into temp_ins values (3);
1 row created.
SQL> set autotrace on explain statistics;
SQL> select * from temp_ins;
ID
1
2
3
Execution Plan
0 SELECT STATEMENT Optimizer=CHOOSE
1 0 TABLE ACCESS (FULL) OF 'TEMP_INS'
Statistics
0 recursive calls
0 db block gets
4 consistent gets
0 physical reads
0 redo size
416 bytes sent via SQL*Net to client
503 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
3 rows processed
SQL>
I realized exectly the opposit of your statement! Oracle apparently cached the content of the temp table before it read from it!! Could you please explain why? Now I'm going to try it with a normal table...
Balazs

How to read LONG RAW data from one table and insert into another table

Hello EVERYBODY
I have a table called sound with the following attributes. in the music attribute i have stored some messages in the different language like hindi, english etc. i want to concatinate all hindi messages and store in the another table with only one attribute of type LONG RAW.and this attribute is attached with the sound item.
when i click the play button of sound item the all the messages recorded in hindi will play one by one automatically. for that i'm doing the following.
i have written the following when button pressed trigger which will concatinate all the messages of any selected language from the sound table, and store in another table called temp.
and then sound will be played from the temp table.
declare
     tmp sound.music%type;
     temp1 sound.music%type;
     item_id ITEM;
cursor c1
is select music
from sound
where lang=:LIST10;
begin
     open c1;
     loop
          fetch c1 into tmp; //THIS LINE GENERATES THE ERROR
          temp1:=temp1||tmp;
          exit when c1%notfound;
     end loop;
CLOSE C1;
insert into temp values(temp1);
item_id:=Find_Item('Music');
go_item('music');
play_sound(item_id);
end;
but when i'm clicking the button it generates the following error.
WHEN-BUTTON-PRESSED TRIGGER RAISED UNHANDLED EXCEPTION ORA-06502.
ORA-06502: PL/SQL: numeric or value error
SQL> desc sound;
Name Null? Type
SL_NO NUMBER(2)
MUSIC LONG RAW
LANG CHAR(10)
IF MY PROCESS TO SOLVE THE ABOVE PROBLEM IS OK THEN PLESE TELL ME THE SOLUTION FOR THE ERROR. OTHER WISE PLEASE SUGGEST ME,IF ANY OTHER WAY IS THERE TO SOLVE THE ABOVE PROBLEM.
THANKS IN ADVANCE.
D. Prasad

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

Import parametes and insert into database table suggestions

experts need suggestions
created a table with 3 fields.
zstable.
field dataelement type length
kunnr kunnr      char 10       key field
name   dname      char   30      key field
aedat aedat        dats 8
aenam aenam       char 12
now i am creating a function modlue with two input parameters
1)kunnr
2)name
i want to update this two fields into table zstable.
1. so suggest me the best way to do this.
Delcarations in import options which one of the below is best and why?
name type char30
kunnr type kunnr
or
name like zstable-name
kunnr like zstable-kunnr
or
kunnr type zstable-kunnr
name type zstable-name.
2. inserting into table
the data that we recieve from the import parameters need to be inserted into the zstable.
please suggest me the appropriate statement waht i need to code for this.
insert kunnr name into zstable.
can i ignore the third field as it is not the key field?
3. before inserting do i need to check whether kunnr and uname is initial ie import parametrs?
4. suppose if i delcared two input parameters in function module zfuntion say vbeln and posnr.
and source code
insert vbeln and posnr into zstable.
now i am calling from the program
zreport.
call function 'ZFUNCTION'.
EXPORT
NAME =
KUNNR =
Will the above statement updates the blank records into the table zstable?.

Hi,
1) I think the best is either refer directly to data element or to table field. This is beacuse once any change is made to this data element it will automatically reflect in your parameters. For table fields it is a bit less safier but still correct. Golden rule - always try to refer to DDIC components like data elements.
name type dname
kunnr type kunnr
2) You need to provide all key fields. I recommend to use MODIFY as it would hanlde both INSERT (if yet no such record exists ) and UPDATE (if already exists).
data: wa_zstable type zstable. "declare work area
wa_zstable-kunnr = kunnr. "pass parameters here
wa_zstable-name = name.
modify zstable from wa_zstable.
3) good practise, for this use
if kunnr is initial and
   name is initial.
"modify ...
endif.
"or if parameters are set as OPTIONAL, then use
if kunnr is supplied and
   name is supplied.
endif.
4) No, the statment you want to use
insert vbeln and posnr into zstable.
is only used for FIELD GROUPS, not DB table. Please refer [INSERT|http://help.sap.com/abapdocu/en/ABAPINSERT_DBTAB_SHORTREF.htm] for correct syntax.
You can alternatively use somthing like
UPDATE zstable SET vbeln = ...
                                        posnr = ...
                                 WHERE ...
This will update fields VBELN and PONR for all records fullfilling WHERE condition. These however musn't be key fields, only non-key fields can be udpated.
Regards
Marcin

Insert into temporary table

I migrate procedures MS SQL Server to Oracle.
In MS SQL SSERVER the use of instructions INSERT with procedure results which are in storage or dynamic instructions EXECUTE in place of VALUES clause is permissible. This construction is similar to INSERT/SELECT but we have to do with EXEC instead of SELECT. The part of EXEC should include exactly one resulted collection about the equivalent types to the types of table columns. In case of the stored procedure, we can pass on proper parameters, use the form of EXEC('string') and even call up wideranging procedures or remote control procedures from different servers. Calling up remote control procedures from different server, which place data in temporary table, and later realizing join with obtainable data, we can construct diffuse joins.
For example. I want insert results stored procedures sp_configure, proc_obj in temporary table.
1)INSERT #konfig
exec sp_configure.
2)
CREATE PROCEDURE proc_test
@Object_ID int,
AS
SET XACT_ABORT ON
BEGIN TRAN
CREATE TABLE #testObjects ( Object_ID int NOT NULL )
INSERT
#testObjects
EXEC
proc_obj @Object_ID,3,1
COMMIT TRAN
RETURN(0)
go
I don't know how migrate for example code to Oracle? Please examples in pl/sql.
Best regards.

Hi Elena,
Patryk is you :) ?
http://www.orafaq.com/forum/t/46956/67658/
Rgds.

How to get the data from one table and insert into another table

Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
Thanks

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

Create and insert into temporary table

Similar Messages

Maybe you are looking for