Create Bom with alternative using CSAP_MAT_BOM_MAINTAIN

Hi all,
I am trying to create a new alternative BOM and thought I had to use the function CSAP_MAT_BOM_MAINTAIN. Creating new BOMs with CSAP_MAT_BOM_CREATE works as well as maintaining them with CSAP_MAT_BOM_MAINTAIN, but I fail in creating a new alternative BOM. In the function
CS_DI_HEADER_OBJECT_CHECK (called within the maintain-function ) it says (close to the failure )
"*Anlegen von Alternativen über CSAP nicht erlaubt"
"creation of alternative using csap not allowed" ....
Well, sounds like I am using the wrong function, but which should I use instead ???
Thanx in advance,
Karsten

Hi,
Use : CS_BI_BOM_CREATE_BATCH_INPUT1 To Create a new BOM or New Alt. BOM.
Use : CS_BC_BOM_CHANGE_BATCH_INPUT to maintain the BOM.

Similar Messages

Error while creating BOM with FM CSAP_MAT_BOM_MAINTAIN

Hi All,
While creating the bom with the FM "CSAP_MAT_BOM_MAINTAIN" using change number i am getting the below error message.
" Processing of this object is not supported with change number."
Please help me out.
Regards
Suresh

call function 'CSAP_MAT_BOM_MAINTAIN'
exporting
    material                 = material
    plant                    = plant
    bom_usage                = usage
    alternative              = alternat
    valid_from               = y_date
*   CHANGE_NO                =                   "<----Have u used this field for creating ?
*   REVISION_LEVEL           =
    i_stko                   = l_stko
*   FL_NO_CHANGE_DOC         = ' '
    fl_commit_and_wait       = 'X'
    fl_bom_create            = 'X'
    fl_new_item              = ' '
    fl_complete              = ' '
* IMPORTING
*   FL_WARNING               =
*   O_STKO                   =
CSAP_MAT_BOM_CREATE would be an ideal one for creation and CSAP_MAT_BOM_MAINTAIN for change
Regards,
Mithun Shetty.

Sample code creating BOM for CS01 using BDC recording.

Hi,
Can anyone give me sample coding creating BOM for CS01 using BDC recording.
I want to display the flat file records,under one (Alternative BOM).
I m already working on it,but i m getting one A.BOM for each records.
[       Header data          ]    [      Item Data               ]
SOFTDRINKS   WIND   1       13            1     ml     l
SOFTDRINKS   WIND   1       11            1     ml     l
SOFTDRINKS   WIND   1       15        1     ml     l
SOFTDRINKS   WIND   1       14       1     ml     l
Code:
report ZBOM
       no standard page heading line-size 255.
*include bdcrecx1.
*DATA: BEGIN OF bdc OCCURS 0,
      matnr(18),
      werks(4),
      stlan(1),
     END OF BDC.
*DATA: BEGIN OF BDC1 OCCURS 0,
      idnrk(18),
      MENGE(18),
      MEINS(3),
      postp(1),
      posnr(4),
     END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data ibdcdata type standard table of bdcdata WITH header line.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(001)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(001)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(001)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(001)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
clear ibdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
      I tried with the sample code but i m not getting the required result.
    Can anyone give some other soln.
Code:
REPORT ZBOM2
no standard page heading line-size 255.
*include bdcrecx1.
TYPES: BEGIN OF TY_FLAT,      " structure for flat file
        STRING(200),
       END OF TY_FLAT.
TYPES: BEGIN OF TY_HEAD,     " structure for header file
        IND(2) TYPE N,
        MATNR(18),
        WERKS(4),
        STLAN(1),
       END OF TY_HEAD.
TYPES : BEGIN OF TY_ITEM,    "structure for item file
          IND(2) TYPE N,
          POSTP(1),
          IDNRK(18),
          MENGE(13),
          meins(3),
        END OF TY_ITEM.
TYPES :BEGIN OF TY_FLAT1,   " structure for final file
         MATNR(18),
         WERKS(4),
         STLAN(1),
         posnr(4),
         POSTP(1),
         IDNRK(18),
         MENGE(13),
         meins(3),
       END OF TY_FLAT1.
INTERNAL TABLE DECLERATIONS:
DATA : T_FLAT TYPE STANDARD TABLE OF TY_FLAT,
       T_FLAT1 TYPE STANDARD TABLE OF TY_FLAT1,
       T_HEAD TYPE STANDARD TABLE OF TY_HEAD,
       T_ITEM TYPE STANDARD TABLE OF TY_ITEM,
       T_BDCDATA TYPE STANDARD TABLE OF BDCDATA with header line ,
       T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL.
WORK AREA DECLERATIONS:
DATA : ST_FLAT TYPE TY_FLAT,
       ST_FLAT1 TYPE TY_FLAT1,
       ST_HEAD TYPE TY_HEAD,
       ST_ITEM TYPE TY_ITEM,
       ST_BDCDATA TYPE BDCDATA,
       ST_BDCMSG TYPE BDCMSGCOLL.
VARIABLES:
DATA : FNAM TYPE LOCALFILE,           "rlgrap-filename,
       FTYP TYPE RLGRAP-FILETYPE,
       LF_FNAM TYPE STRING.
DATA : V_IND(2) TYPE N,                " value 1,
       V_FLD(20),
       V_NO(2) TYPE N.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = T_FLAT
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_FLAT INTO ST_FLAT.
SPLIT ST_FLAT AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
INTO ST_FLAT1-MATNR ST_FLAT1-WERKS
ST_FLAT1-STLAN ST_FLAT1-POSTP
ST_FLAT1-IDNRK ST_FLAT1-MENGE ST_FLAT1-MEINS.
APPEND ST_FLAT1 TO T_FLAT1.
CLEAR ST_FLAT1.
ENDLOOP.
SORT T_FLAT1 BY MATNR WERKS STLAN POSTP IDNRK MENGE MEINS.
LOOP AT T_FLAT1 INTO ST_FLAT1.
MOVE :
ST_FLAT1-MATNR TO ST_HEAD-MATNR,
ST_FLAT1-WERKS TO ST_HEAD-WERKS,
ST_FLAT1-STLAN TO ST_HEAD-STLAN,
ST_FLAT1-POSTP TO ST_ITEM-POSTP,
ST_FLAT1-IDNRK TO ST_ITEM-IDNRK,
ST_FLAT1-MENGE TO ST_ITEM-MENGE,
ST_FLAT1-MENGE TO ST_ITEM-MEINS.
AT new STLAN.
ADD 1 TO V_IND.
ENDAT.
MOVE V_IND TO ST_HEAD-IND.
MOVE V_IND TO ST_ITEM-IND.
APPEND ST_HEAD TO T_HEAD.
APPEND ST_ITEM TO T_ITEM.
CLEAR ST_HEAD.
CLEAR ST_ITEM.
ENDLOOP.
CLEAR V_IND.
*perform open_group.
SORT T_ITEM BY IND.
SORT T_HEAD BY IND.
DELETE ADJACENT DUPLICATES FROM T_HEAD.
LOOP AT T_HEAD INTO ST_HEAD.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              ST_HEAD-MATNR.
perform bdc_field       using 'RC29N-WERKS'
                              ST_HEAD-WERKS.
perform bdc_field       using 'RC29N-STLAN'
                              ST_HEAD-STLAN.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
LOOP AT T_ITEM INTO ST_ITEM WHERE IND = ST_HEAD-IND.
ADD 1 TO V_NO.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-MENGE(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              ST_ITEM-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              ST_ITEM-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              ST_ITEM-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              ST_ITEM-POSTP.
CONCATENATE 'RC29K-IDNRK(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-IDNRK.
CONCATENATE 'RC29K-MENGE(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MENGE.
CONCATENATE 'RC29K-MEINS(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-MEINS.
CONCATENATE 'RC29K-POSTP(' V_NO ')' INTO V_FLD.
CONDENSE V_FLD.
PERFORM BDC_FIELD USING V_FLD
ST_ITEM-POSTP.
V_NO = 1.
ENDLOOP.
CLEAR V_NO.
*perform bdc_dynpro      using 'SAPLCSDI' '0130'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'BDC_CURSOR'
                             'RC29P-POSNR'.
*perform bdc_field       using 'RC29P-POSNR'
                              POSNR.
*perform bdc_field       using 'RC29P-IDNRK'
                             bdcdata-IDNRK.
*perform bdc_field       using 'RC29P-MENGE'
                             bdcdata-MENGE.
*perform bdc_field       using 'RC29P-MEINS'
                             bdcdata-MEINS.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                                 'X'.
perform bdc_dynpro      using 'SAPLCSDI' '0133'.
perform bdc_field       using 'BDC_OKCODE'
                                '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-matkl'.
perform bdc_field       using 'RC29P-SANKA'
                                 'zv01'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-POSNR(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
*perform bdc_transaction using 'CS01'.
perform close_group.
CALL TRANSACTION 'CS01' USING t_bdcdata MODE 'A' UPDATE 'S'.
REFRESH t_bdcdata.
clear t_bdcdata.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR st_bdcdata.
st_bdcdata-PROGRAM = PROGRAM.
st_bdcdata-DYNPRO   = DYNPRO.
st_bdcdata-DYNBEGIN = 'X'.
APPEND st_bdcdata to t_bdcdata .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR st_bdcdata.
    st_bdcdata-FNAM = FNAM.
    st_bdcdata-FVAL = FVAL.
    APPEND st_bdcdata to t_bdcdata.
ENDIF.
ENDFORM.

Create BOM with item category L

Hi,
I am facing an issue while going to create BOM with item category L.
System shows material type can not be used with item category L for that particular plant.
Please help...
Thanks,
Rampreet Jaiswal
Edited by: Csaba Szommer on Jan 11, 2012 12:21 PM

Hi,
Its also maintained * for header material.
Guys we have already checked OS14 and OS24 at first. but it is allowed for header and item.
regards,
Solomon

Standard BOM with Alternative BOM

Dear Experts,
We are having a requirement of comparing Standard BOM with actual material consumption. We got Actual consumption. When we were trying to get the standard BOM component, standard Data source is not available. Then we searched in SDN and they are recommending to go with view option. We have created view with MAST,STKO and STPO tables. This view is not working when a plant is having alternative BOM. Further research on SDN reveals that we can use CSAP_MAT_BOM_READ functional module. When we executed this functional module, it is giving the standard BOM components and its Base Quantity. But we were not able to create Generic data source with this functional module.
The requirement is urgent. Please help me with your experience.
With Regards,
Balachander.S

when we were joining MAST, STKO and STPO, the alternative BOM was not taking care. Then we have linked STAS. It was sloved.
With Regards,
Balachander.S

FM/BAPI to create BOM where alternative can be passed as input

Hi
My requirement is to create BOM of a material where I need to input 'Alternative BOM' also like ijn CS01 t-code.
I got one FM CSAP_MAT_BOM_CREATE which is creating BOM , but it does not take 'Alternative BOM' as input parameter, rather it creates default alternative BOM. But I need a FM which will take alternative BOM as input.
Please help.

Dear Avishek,
In my understanding the system creates the first alternative BOM 01 for a BOM usage,whenever you
create through CS01 or by a functional module,no need of any input for this field.
come back with your queries,if you are facing some problem on this.
Regards
Mangalraj.S

Creating BOM with components but using additional UOM

Hi,
I have a requirement.I want to create a BOM using componennts with their additioanl UOMs.
Example: Parent material ABC123 UOM:EA
Component : Test001,UOM EA,additional UOM: DZ
Now if I am creating a BOM for ABC123 with components Test001 but overwritting the default UOM EA with Additional UOM DZ,system throws error 'Unit of measure DZ not supported for material Test001 in plant XXXX'
I have maintained additional UOM DZ for component in material master.
Is there any setting in the system which will allow me to use additional unit of measure for the component ?
Please suggest
Best Regards,
manOO

Hello, and I apologise if my answer is a little late, but all you have to do is maintain the production unit in the 'Work Scheduling' view of MM02.
In the 'General Data' tab, update the 'Production Unit' field with the UOM which you would like to create the BOM.
As long as the 'Additional Data' Units of Measure is updated in MM02 for the raw material, this should fix your problem.
Regards
Adam

Create SR with Attachment using WSDL

Anybody knows how to create a SR on CRMOD, with an Attachment consuming WSDL?

Dear Dmitry Rassakhatsky
Can you please elaborate what you are trying to achive using BAPI_DOCUMENT_CREATE02 and SAP XI.
We would be in better position to suggest solution.
Also most of us will not be able to understand Technical ABAP so request you to provide detail scenario.
With Warm Regards
Mangesh Pande

Help creating .dll with c using JNI

Hi. I have created a JNI application that uses C to call Java. Now, I am trying to create the .dll for windows. I am using VS C++ compiler. My program compiles; however, it doesn't seem to start the JVM. I am not sure how to pass the arguments in VS C++ while builiding and running. Please let me know. Thanks.

Hey,
Thanks. I apologize for not being clear. I have created the dll file and an application that links to that dll and executes the code. It creates the .exe file and when I execute it, it goes through the sample() function that just prints "Hello", and then it goes through the startJVM() function where the JVM is intended to start; however, the status of JVM is returning -1. It's not able to start JVM. I have included the path for the jvm.dll and jvm.lib. But, still won't work. Please reply with suggestions/comments. Thanks again.

Can't create text with PHP using imagettftext [SOLVED]

I think that after the upgrade of PHP to the modular one I can't create text using TTF fonts. Before I file a bug report could someone confirm if it works or not for them? I might just have screwed something in my box.
This code should create a text image and display it in the browser (it assumes you have DejaVu fonts in the default directory):
<?php
// Set the content-type
header("Content-type: image/png");
// Create the image
$im = imagecreatetruecolor(400, 30);
// Create some colors
$white = imagecolorallocate($im, 255, 255, 255);
$grey = imagecolorallocate($im, 128, 128, 128);
$black = imagecolorallocate($im, 0, 0, 0);
imagefilledrectangle($im, 0, 0, 399, 29, $white);
// The text to draw
$text = 'Testing...';
// Replace path by your own font path
$font = '/usr/share/fonts/TTF/DejaVuSans.ttf';
// Add some shadow to the text
imagettftext($im, 20, 0, 11, 21, $grey, $font, $text);
// Add the text
imagettftext($im, 20, 0, 10, 20, $black, $font, $text);
// Using imagepng() results in clearer text compared with imagejpeg()
imagepng($im);
imagedestroy($im);
?>
Could someone with an up to date php with GD enabled tell me if it works or him/her?
Thanks.
EDIT: Ok, I solved it. The error reporting is turned off by default now, so I was not getting any error. After turning it on I found out it was related to the open_basedir directive being enabled now in php.ini. Turning it off allowed me to access the TTF for drawing text.
Last edited by Bogart (2007-11-01 00:43:33)

Aha! I figured it out. I used File...Open As to open it as a Camera RAW file. In the ACR editor, it was showing as 16-bit depth. Changed it to 8-bit and saved it. Now the Text tool works!
Ken

Creating PDF with IMAGE using CFDOCUMENT TAG

Hi Guys,
I m facing problem while creating the PDF using CFDOCUMENT
tag.
Actually my clients want the IMAGEs in PDF document.
Problem is most of the images in JPG format and while I am
going to attach images in PDF document it takes lots of time for
creating PDF. In most of time it cause timeout.
I have try to convert images JPG to PNG, yes I some what
better performance than JPG format but still it is work for 20 - 25
images. In my case I want to attach normally 50-100 images in PDF
(sometimes it is more 200).
PLZ, Help me.. F1...F1...F1
thanks in advance
Pritesh
Coldfusion Programmer

I am having a similar and more serious problem. It takes a
long time to execute, but even attaching a small image balloons the
pdf to 6MB plus. After a few images it gets up to 20MB. These are
100k jpeg files being attached. The resulting PDF is too large to
email or process effectively. Does anyone know how to reduce
size/processing?

Creating snapshops with API using Forms 5.0

We're trying to create snapshots on an Olite database using the
API. We've problems below are not yet solved:
1. It's impossible to create complex snapshots. A complex
snapshot uses a union or a join.
2. It's impossible to create a snapshot for a view.
3. It's impossible to create a snapshot that contains single
quotes. For example: The snapshot "select 'A' from dual" can't
be created.
null

We're trying to create snapshots on an Olite database using the
API. We've problems below are not yet solved:
1. It's impossible to create complex snapshots. A complex
snapshot uses a union or a join.
2. It's impossible to create a snapshot for a view.
3. It's impossible to create a snapshot that contains single
quotes. For example: The snapshot "select 'A' from dual" can't
be created.
null

Creating Schedule With CalendarDays Using WS-SDK Seems To Miss Days

I've tried to create a couple of schedules in Business Objects using the WS-SDK, creating schedules that run on a monthly basis.
The parameters all appear correctly in the InfoView application, but the next run time misses out the first possible instance. E.g.
Creation Time:              5/26/2011 3:47 PM (Start time is 5/26/2011 11:02 PM)
Next Run Time:      7/1/2011 11:02 PM (Should have been 6/3/2011 11:02 PM)
Recurrence Type:      Object runs every month on the Friday of week 1.
Creation Time:              5/26/2011 12:33 PM (Start time is 5/27/2011 9:32 AM)
Next Run Time:      7/2/2011 9:32 AM (should have been 6/4/2011 9:32 AM)
Recurrence Type:      Object runs every month on the Saturday of week 1.
Any ideas why the first month in the range is missed out?

I fixed this by not specified the start date and end date in the CalendarDays object I was passing in.

Help me in creatting MenuItem with sortcut using ctrl + O

How to use sortcut(ctrl + o) in awt menuitem.......

From the API:
(in java.awt.MenuItem)
void setShortcut(MenuShortcut s)
Set the MenuShortcut object associated with this menu item.
(In java.awt.MenuShortcut)
(ctor)
MenuShortcut(int key)
Constructs a new MenuShortcut for the specified virtual keycode.
(from java.awt.event.KeyEvent)
(field)
static int VK_O
Hopefully that should tell you everything you need to know - if not, check the API docs out, they will answer these kinds of questions a lot faster than posting to the forums will
Good Luck
Lee

Create material with reference using BAPI

Hi
I need to create material using refrence to another material for all material Views. Can I use BAPI_MATERIAL_SAVEREPLICA.
Which parameter I need to fill for reference materia
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Jan 12, 2011 3:18 PM

Hi Goutam,
You can use the BAPI BAPI_MATERIAL_SAVEDATA, which will create/update the material. You can pass the reference material in the filed BAPI_MARA-PL_REF_MAT. And you can pass reference material for all view like this.

Create Bom with alternative using CSAP_MAT_BOM_MAINTAIN

Similar Messages

Maybe you are looking for