Create BP and BP Relationship?

Hi,
Which FM's or BAPI's do I have to use to create BP and BP Relationship ?
I have an excel with all the information about this BP and BP Relationship..
Tnx. Adibo.

Hi Abido,
There are many relationship details such as relationship address, contact person details, etc.
You can find all the relevant modules by doing an F4 help in SE37 for BUPR*.
Some useful modules for the create operations are :
BUPR_ACTIVITYP_CREATE        
BUPR_CONTP_ADDR_ADD          
BUPR_CONTP_CREATE            
BUPR_EMPLO_ADDR_ADD          
BUPR_EMPLO_CREATE    
BUPR_RELATIONSHIP_CREATE     
BUPR_RESP_EMPLO_CREATE       
BUPR_SHAREHOLD_CREATE        
BUPR_CONTP_HOURS_MAINTAIN
Hope this helps you.
Regards,
Rishu.

Similar Messages

  • How to copy the  positions and their relationships of one org.unit to other

    f there about 20 organization units among which 6 org.units have same positions and same relationships ,i know that we can create one org.units and their relationships among 6 similar org.units and then copy the same position and relationships to other 5 org.units as well instead of individually creating positions and assigning relationships to them  which results in wasting a quality time.but i dont know how to copy it? so please help me by informing me in details how to copy the positions n their relationships to other org units.

    Hi.
    This may sound like a bit of a pain in the *** but why not save the channel strip settings into your own folder then that way you can open them up in other songs and you have some channel strips to try out when you cant find anything else to fit. Plus its fun to open up lots of different audio onto the tracks and see what the effects sound like, Brian Eno style.....
    Hope this helps

  • How to create tables and relationship between ?

    Hello everybody,<o:p></o:p>
    I have three table with structures as follow:<o:p></o:p>
    <o:p> </o:p>
    Table1
    contains information on ledger accounts,and
    Table2 contains Groups of the detailed
    accounts.
    When defining ledger
    accounts , we must associated them with
    groups of detailed accountsthat
    are
    set
    by the
    Check
    boxes. groups of detailed accounts are three
    levels, At each level, there are fifteen
    groups as follow:
    1_others ,2_People ,3_companies ,4_
    Cost centers ,5_projects ,6_
    Letter of Credits ,7_ Current
    Accounts ,8_
    Banking facilities ,9_
    Commodity ,10_ Branches
    aggregation ,11_ Purchase
    Contract
    Services ,12_
    Sales Contract
    Services ,13_
    Export Products ,14_
    Control account ,15_
    Months.Table3 contains detailed accounts information that should associated with groups of detailed accounts(fifiteen groups).
    In addition, we
    have in our program four combobox,
    detailed accounts must be
    linked to the detailed groups
    so that, by selecting one ledger account in combobox1 it should display detailed accounts of level1 in combobox2 ,detailed accounts of level2
    in combobox3 and detailed accounts of level3 in combobox4.<o:p></o:p>
    <o:p> </o:p>
    How
    to design tables and the relationships between them, so
    with select the ledger account I can see the detailed
    accounts of per level in other comboboxes?<o:p></o:p>
    <o:p> </o:p>
    I've
    spent
    a lot of time
    on this
    subject
    but
    I have
    not been able
    to
    solve this problem.<o:p></o:p>
    Please help me,<o:p></o:p>
    Best regards.<o:p></o:p>

    I am guessing....I hope it is helpful...
    >1_others ,2_People ,3_companies ,4_
    Cost centers ,5_projects ,6_
    Letter of Credits ,7_ Current
    Accounts ,8_
    Banking facilities ,9_
    Commodity ,10_ Branches
    aggregation ,11_ Purchase
    Contract
    Services ,12_
    Sales Contract
    Services ,13_
    Export Products ,14_
    Control account ,15_
    Months.
    Setup a table for each.
    >Table3 contains detailed accounts information that should associated with groups of detailed accounts(fifiteen groups).
    Setup the AccountDetail(1,2,3 level) tables with 15 NULLABLE FOREIGN KEYs. If some group is not applicable for an FK, keep the value NULL, otherwise enter a valid PK value.
    >Table1
    contains information on ledger
    accounts,and Table2 contains
    Groupsof the detailed
    accounts
    Setup LedgerAccount tables.
    Setup LedgerDetailXref table with FOREIGN KEYS to LedgerAccount & AccountDetail(1,2,3) tables.
    FOREIGN KEY examples: http://www.sqlusa.com/bestpractices2005/bankdatabase/
    Kalman Toth Database & OLAP Architect
    SQL Server 2014 Design & Programming
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Separate document no. for SD revision document and detagging relationship between invoice and SD document no.

    HI,
    Country specific settings for India - Business transactions enables SD revision vide table TE872_SDCTRL_IND.
    Whenever SD revision takes place system issue similar document no. as that of invoice and tagged it with XBLNR as per standard process.
    Now issue that if that invoice is reversed, subsequent SD also gets reversed.
    So business requires to have separate document no. for SD revision document and detagged relationship between invoice and SD document no.
    I have explored event R507, 0010, 0060 and R436 but couldn't find input structure where such separate document can be assigned.
    So can you provide hint which can assist in issue resolution?
    Regards,
    Paresh

    Check this thread, if this helps.
    [url] Link between MKPF table and EKKO or RBKP table [url]
    I've done this as well earlier to create a custom document flow for archived documents where from the EBELN i've found all the related documents. Hope this helps.

  • SQL data modeller -- how to create 1 to 1 relationship foreign key ?

    hi guys...
    i got 2 tables..
    table 1 - CFR
    CFR_ID = primary key
    table 2 - USER_PLAN
    USER_ID = primary key
    PLAN_ID,
    CFR_ID = foreign key reference (table 1)
    The business flows go like this..
    insdie CFR table, it contain all records / transactions of a particular user/plan. everytime a new transaction occurs for a plan/user, a new CFR_ID / row will be generated.
    after which, the newly generated CFR_ID for the new row , will be updated to the CFR_ID in USER_PLAN
    Thus, there is always a 1 to 1 relationship between the 2 table regardless how many CFR_ID is generated for a particular USER_PLAN. as the CFR_ID in the USEr_plan table will always be the latest one generated inside the CFR table.
    However, in the data modeller, i am unable to create such foreign key relationship... ANY idea how do i create a 1 on 1 foreign key relationship ? or there is no such way..
    Thanks and Best Regards,
    Noob

    Hi philips,
    Thanks for the wonderful reply..
    Just to double comfirm with you,
    even if i had set a unique constraint on CFR_ID(foreign key column), inside the relationship model, the relationship between the foreign key is still showing as a 1:m relationship right ?
    just that a character 'U' will appear beside the CFR_ID column.
    However the diagraphm is still showing a 1:M relationship.
    is this correct ?
    Regards,
    Noob

  • How to create artifact and redirect

    HI ,
    I need to implement a use case where there are two Access Manager(7.0) (first named as AM1, other AM2) and an tomcat server. Where AM1 is in some other domain and has trust relationship with AM2. Also AM2 and tomcat are in the same domain.
    Use case:
    When the user is authenticated by 'AM1' I want 'AM1' to create artifact and redirects that artifact to the servlet in tomcat server, This servlet will then send request to AM2 which will send this artifact through SAML request to AM1, AM1 will process the artifact and send SAML assertion through SOAP over https.
    I know this can be implement using SAMLClient API. but I dont want to install jar files on 'AM1'.
    Is there any other way ? If its just a configuration issue please give me the details. I tried following Access Manager documentation and was able to created artifact using SAMLAwareservlet but it fails before redirecting to my servlet.
    Following is the Message I get
    "Failed to Create SSO token"
    Please help,
    Thanks

    It all depends on the current settings of the current SSID.
    You cannot configure a web redirect with another security than none or a pre-shared key on layer2.
    If you are using 802.1x, you can go with the splash page : http://www.cisco.com/en/US/partner/products/ps6366/products_configuration_example09186a0080956185.shtml
    I don't see another friendly method for your users ...
    Nicolas.
    ===
    Don't forget to rate answers that you find useful

  • How to create the Business Partner Relationship

    Dear Sir,
    I would like to add the new  Business Partner RElationship , but I don't know how to do . Please kindly advise me the step to add the new business partner relationship.
    Thank you and  best regards,
    Vimol

    Hi Vimol,
    BP Relationship can be created in the Tcode - BP.
    Eg: If an Org, say SAP is defined as a BP (Org), and now u need to define some relationships for this org, say the Contact person, Employee responsible etc., then we nd to first create the separate BP's, for eg Contact PErson for SAP Org is Vimol S, then create Vimol S as an individual. and after doin this go to SAP Org BP and there click Relationship tab, on the TOP RIGHT hand side of the screen. Here it'll ask for the BP no. and the relationship u need to assign b/w this BP and the Org. There will be many relationships, choose the one which suits your requirement. This will take care of it.
    I hope my explanation and steps are clear. Pls revert if any isues.
    Suji

  • Creating IT00 and retrieving pernr

    Hi Guys,
              Generally when we do hiring in R/3, after creating IT0000 we get the pernr (internal). How to achieve this through BAPI? I know we cannot perform action thru BAPI. But what I am doing is I am creating each infotype (00, 01, 02, 06, 07, 19) with HR_MAINTAIN_MASTERDATA. So after creating IT00, I need to capture the created pernr and update other infotypes for that pernr. Is it right way? Please help me asap.

    use GET parameter ID PER as posted previously, that definitely works.  The HR_RETURN parameter does not work, that only contains PERNR when you are maintaining data on a pre-existing records.
    Be careful using HR_MAINTAIN_MASTERDATA for Hiring actions, in 4.6 it does not create the CP object and CP-->P relationship in OM.  Maybe it does in later releases, not sure.

  • Proxy Class and URL relationship

    Hi All,
    I wanted to know in which table does the relationship between an proxy class and the URL used to create it is stored ?...
    Thanks...
    Preetham S

    kindly avoid duplicate posting of the same question.
    its answered in
    Proxy Class and URL Relationship
    Raja

  • Creating Header and Footer in ALV

    hi,
    can anyone please tell how will you create Header and Footer in ALv and Classical Report.

    Hi,
    In classical report use events 'top-of-page' for header and 'end-of-page' for footer.
    in ALV
    follow this link
    http://www.sap-img.com/abap/test-alv-display-with-header-footer.htm
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/header-footer-display-in-alv-grid-for-layout-description-344391
    Regards and Best wishes.

  • Hello,  I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it.  Has anyone got the same file? Or know where it may originate from?  Thanks in advance!

    Hello,
    I have a strange file in my Users folder, named PortDetect.log
    I have no idea which app created it and it reappears when I delete it.
    Has anyone got the same file? Or know where it may originate from?
    Thanks in advance!

    know where it may originate from?
    The Huawei wireless modem driver.

  • How to create pdf and html usin oracle policy automation with steps.

    Hi,
    I tried to create pdf report.But they have some problem for while creating xslt.
    Pls provide more steps or simple example creating xslt and which xml use for that also.

    Below is a working (OPA 10.1) example, which I found earlier in this forum. You can call it from a document control on the summary screen. The xml is provided by the server containing all attributes with a public name.
    <?xml version="1.0" encoding="iso-8859-1"?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
                    xmlns:fo="http://www.w3.org/1999/XSL/Format"
                    xmlns:fn="http://www.w3.org/2005/xpath-functions">
    <xsl:output method="xml" indent="yes" encoding="utf-8"/>
    <xsl:template match="/">
    <fo:root>
      <fo:layout-master-set>
        <fo:simple-page-master master-name="my-page">
          <fo:region-body margin="1in"/>
        </fo:simple-page-master>
      </fo:layout-master-set>
      <fo:page-sequence master-reference="my-page">
        <fo:flow flow-name="xsl-region-body">
          <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="solid">
            <xsl:apply-templates mode="dump" select="/session"/>
          </fo:block>
        </fo:flow>
      </fo:page-sequence>
    </fo:root>
    </xsl:template>
    <xsl:template match="*" mode="dump" priority="100">
                <fo:block margin-top=".5cm" margin-left=".1cm" border-start-style="solid">
                    Node:
                    <xsl:value-of select="name()"/>
                    <xsl:if test="count(@*) &gt; 0">
                        <fo:block margin-left="1cm">
                            Attributes:
                            <xsl:for-each select="@*">
                                <fo:block><xsl:value-of select="name()"/>=<xsl:value-of select="."/></fo:block>
                            </xsl:for-each>
                        </fo:block>
                    </xsl:if>
                    <xsl:if test="string-length(normalize-space(text())) > 0">
                        <fo:block>Text Value: "<xsl:value-of select="text()"/>"</fo:block>
                    </xsl:if>
                    <xsl:apply-templates mode="dump" select="*"/>
                </fo:block>
        </xsl:template>
    </xsl:stylesheet>

  • Created Network and Internet Sharing Problems

    Hello,
    I created network with WEP password. I proceeded to turn on internet sharing.
    All works great until the iMac goes to sleep.
    Once it comes back on the network I created is missing and I have create it all over again.
    The internet connection is through ethernet staring into the iMac.
    Is there a way to get the iMac to stop forgetting the created network and leave the internet connection on? Even when it's sleeping.
    Thanks in advance.

    Hi there,
    Is there a reason why you chose WEP? I ask because WEP is an encryption technology that has been cracked so if possible I"d suggest you use WPA or WPA2 encryption instead. Am I correct to assume you don't have a router and all the other computers connect to the internet through the imac? If you don't have a router I'd suggest you buy one, they are not much money and provide excellent protecton from the internet. A router will protect all the computers on your network behind its firewall and would no longer have to connect through the imac.
    A couple of things to check:
    Go to System Preferences>Network and highlight 'Wireless' on the left side. (Also, if you don't use Bluetooth or any other type of networking listed there delete them from the list leaving only Ethernet and Airport) Uncheck 'ask to join new networks'.
    Then click on 'Advanced..' and under the Airport tab make sure only your network is listed in the 'Prefered Networks' window. Under that window check 'remember any network this computer has joined' and uncheck 'disconnect from wireless networks when logging out'.
    That's the way I've got my computer set up and I've never lost a connection.
    Message was edited by: pogster

  • How to get the user created at and modified at properties for a site collection using powershell

    Hi guys, I Know how to get the list of users of a site collection by Get-SPUser cmdlet but hte problem is that this cmdlet doesnt give me the user Created at and modifed at properties 
    can any one tell me how to get these values via powershell???? 
    ps: ignore the 2013 screenshot.. i just want a way to get those values .. if you provide me solution in either 2010 or 2013 , i will crack the other..
    plz guys help me ...

    Get the User Information list and then get the user from that list
    $web = Get-SPWeb "siteUrl"
    $userInfoList = $web.SiteUserInfoList
    $userItem = $userInfoList.Items[0]; #0 here is just for demonstration. You take the user you want here or loop through all users.
    $created = $userItem["Created"]
    $modified = $userItem["Modified"]

  • I have a windows computer. How can I create apps and put them on itunes?

    I have a windows computer. How can I create apps and put them on itunes?

    You can't. The iOS SDK requires Mac OS X and an Intel Mac; Windows applications can't be put on either the iOS or Mac OS X App Stores.
    (82889)

Maybe you are looking for