Create "buckets or groups" in OBIEE's RPD
All - Thanks in advance for helping out. I need to create "buckets" for data in the RPD.
Essentially, i have Total Revenue for a Product Line. I need to create separate buckets for some of these products in the RPD.
Example:
Bucket (grouping) one: Product A Revenue
Bucket (grouping) two: Product B, C, D Revenue
Bucket (grouping) three: Product E, F, G, Z, 12, 32 Revenue
Etc, etc. you got the point.
Again, thanks for your help.
Gracie
Edited by: user12949454 on Apr 6, 2010 3:38 PM
Scott, i think i end up needed a hybrid solution.
Will need a grouping / bucket for the dimension attribute but will need revenue for that grouping only. Looking to repeat the same steps for different dimension grouping.
Let me know your feedback.
Regards,
Similar Messages
-
Object Level security by creating catalog groups in OBIEE-10G
Hi All,
I have a requirement to display the dashboard based on the user login. Ex. Mike belongs to HR, Smith belongs to Accounts
When Mike logs in he should see only these three dashboards. HR View, Common data1, common data2. When Smith logs in he should see only these three dashboards. Accounts view, Common data1, commondata2.
The commondata1 and commondata2 dashboards has common reports for all the departments. The other dashboards are department specific with all different reports. How can I implement this?
From one of my earlier posts I was advised to do it using Object Level security by creating catalog groups. Can you please provide me end to end instructions on how to create Object level security based on catalog groups.
Thanks for your time and help.Hi,
Mike to HR
Smit - Account
Yes, You achive by Object Level security by creating catalog groups
1) Create Catalog group and users in RPD part(Ex: Account_grp,HR_grp)
2)assign user to that particular group(let say Ex: Account_grp= Smith and HR_grp=Mike )
3) login (Admin user id ) into dashboard page and --->mange dashboard page -->add users to that particular
dashboard to relevent users and save it then
try to login that mike and smith user it will work
kindly refer below link
http://www.rittmanmead.com/2010/01/obiee-10g-web-catalog-best-practices/
http://www.rittmanmead.com/2007/05/obiee-and-row-level-security/
thanks
Deva -
hi Guys,
I have got a setup of OBIEE 11.1.1.3.0 on windows 32bit machine and now i am planning to have a setup of 11.1.1.5.0 on windows 64 bit machine.
please tell me the Detailed steps for Migrating the Rpd Catalog and User ,Groups from OBIEE 11.1.1.3.0 to 11.1.1.5.0
Like
1. Do i have to copy the RPD and Catalog Directly to 1.5 or some Upgrade Assistance is to be done
2. If i am Using the Export Provided in the myrelam ( in 1.3) and taking it to obiee 1.5 (as it already contains some inbuilt policies and groups) does it going to give me error
Regards
AnkitCheck the Oracle reference I have provided earlier. Concept goes like this:
Important difference is that upgrading from 10g to 11g is called an "out-of-place upgrade" while upgrading to another 11g is called an "in-place upgrade," because the upgrade operates on existing files. Moving from one 11g release to another 11g release is sometimes referred to as "patching."
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e16452/bi_plan.htm#BABECJJH
Follow patching and not out-of-place upgrade as you are required to upgrade component
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e16793/patch_set_installer.htm#PATCH789
Hope this is clear now -
Regarding assigning permission to dashboard to a catalog group in obiee 11g
Hi All,
i have a dashboard : trainee .
i have created one catalog group that is: GroupA
now i have assign some user to it.
now i want to assign permission to the trainee dashboard to the groupA.
i tried to do that but when i am doing login obieee by using any user that has assigned to group A.
but i am not able to see trainee dashboard.
can anyone tell me the steps for doing it.Hi,
http://www.varanasisaichand.com/2011/03/obiee-11g-security-creating-users-and.html
hope it helps
Thanks,
satya -
OBIEE 11g RPD password reset and Hierarchy implementation
HI All,
How to get the forgot password in OBIEE 11g. Please refer the below link you will get one good Suitable solution.
http://satyaobieesolutions.blogspot.com/2013/06/how-to-reset-forgotten-obiee-11g-rpd.html
How to reset the forgot password in OBIEE 10g. Please refer the below link.
ttp://satyaobieesolutions.blogspot.com/2013/06/how-to-reset-forgotten-obiee-10g-rpd.html
How to create Time Hierarchy in OBIEE 11g:
http://satyaobieesolutions.blogspot.com/2013/06/dimension-hierarchy-111170.html
Hope this help's
Thanks,
Satya Ranki Reddylooks like there is a way to recover the lost passwords for RPD's using listcred() method of wlst
look at the following doc http://www.rittmanmead.com/2011/04/oracle-bi-ee-11g-migrating-security-credential-store-part-3/
Listing the Credential in Dev Environment:
All the Credential Keys are generally stored in an encrypted format (the passwords). So, to migrate we will need to first extract these passwords and then do the migration to Production. The passwords can be extracted through the listCred() method of WLST. We need to be connected to the Admin Server for this method to work. The exact command is given below
connect(“weblogic”,”welcome1″,”localhost:7001″)
listCred(“DevMap”,”DevKey”)
This will show the encrypted password entered inside the key as shown below
And this is what we see in the enterprise manager.
As you see, with listCred we are able to extract the full credentials. Now, lets try to see what is the default password for the BISystemUser.
listCred(“oracle.bi.system”,”system.user”)
In the same way lets extract the passwords of the SampleAppLite repository.
listCred(“oracle.bi.enterprise”,”repository.SampleAppLite”)
With this we can even extract the lost Repository passwords."
i am going to try it out now -
Displaying Application Roles / Groups in OBIEE
All,
We followed this blog - http://www.rittmanmead.com/2010/10/obiee-11gr1-security-explained-working-with-the-default-security-configuration/ - to implement security in our reports in OBIEE. We created four AD groups and four corresponding Application Roles for the four organizational segments in the company. This is working really well. However, the business wants to display a message saying "NOTE: You are in Role <Role Name> so you are seeing partial data for that Segment" or something like that. Is there a way to obtain the current users groups and/or application roles so they can be displayed in an analysis or dashboard?
Thanks in advance!Use VALUEOF(NQ_SESSION.ROLES) as one of column expression and call that column in Narrative view using @n.
where n is the column order from left to right.
You might need to format the values to , separated.
Ref: http://docs.oracle.com/cd/E14571_01/bi.1111/e10540/variables.htm#BIEMG3104
If helps mark as correct.
Edited by: Srini VEERAVALLI on Jan 29, 2013 4:33 PM -
Creating a web group through Web Services
User web services, we're able to create Presentation users merely by calling SAWSessionService's logon or logonex methods. But how can I create a web group?
Yes, I'm using 10.1.3.2. Let me give more detail.
Our RPD is setup to perform external database authentication. We use initialization blocks to perform this, and it works great. We can "login" by using NQUser in the URL or using the login or loginex methods. If the user doesn't exist in the presentation catalog, the user gets added if the authentication is successful.
We've been using web services to create catalog objects (dashboards, folders, etc.) and add ACL to them. But we've been doing this on a user-by-user basis. Now, we wish to add ACL for groups instead of users. But step one is to first create a presentation group. We can't find a programmatic way to do this. At first, I assumed we could create a catalog item via WebCatalogService's writeObject service. But when looking for the XML that defines a "group", we found out that a group is not defined by an XML. As someone wrote previously, I can't find any other service that creates a group.
Once again, can a group be created through OBI's web services? It feels like it does everything else. -
Accounts being created with administrative group rights
Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights. Below is the EventViewer log for the user creation:
User Account Created:
New Account Name: username
New Domain: PCNAME
New Account ID: PCNAME\username
Caller User Name: PCNAME$
Caller Domain: DOMAINNAME
Caller Logon ID: (0x0,0x3E7)
Privileges -
Attributes:
Sam Account Name: username
Display Name: <value not set>
User Principal Name: -
Home Directory: <value not set>
Home Drive: <value not set>
Script Path: <value not set>
Profile Path: <value not set>
User Workstations: <value not set>
Password Last Set: <never>
Account Expires: <never>
Primary Group ID: 513
AllowedToDelegateTo: -
Old UAC Value: 0x2DAB2B0
New UAC Value: 0x2DAB2B0
User Account Control: -
User Parameters: <value not set>
Sid History: -
Logon Hours: <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID: (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
User name: DOMAINNAME\PCNAME$
Auth package: NTLM
Logon type: (none)
Session: 0
Sid: S-1-5-18
Logon time: 9/11/2014 12:41:53 PM
Logon server:
DNS Domain:
UPN:
4: System
316: smss.exe
364: csrss.exe
392: winlogon.exe
440: services.exe
452: lsass.exe
628: svchost.exe
756: LMAgent.exe
840: svchost.exe
1000: spoolsv.exe
1252: avagent.exe
1268: camWMIAgent.exe
1324: cissesrv.exe
1380: cpqrcmc.exe
1404: vcagent.exe
1440: svchost.exe
1480: HsQuotas.exe
1740: inetinfo.exe
1780: EmailAgent.exe
1856: snmp.exe
1884: sysdown.exe
1920: smhstart.exe
2192: svchost.exe
2388: cmd.exe
2396: hpsmhd.exe
2444: cqmgserv.exe
2464: cqmgstor.exe
2484: HSphere.exe
2596: wmiprvse.exe
2676: cmd.exe
2684: rotatelogs.exe
2692: cmd.exe
2700: rotatelogs.exe
2732: searchindexer.exe
2812: hpsmhd.exe
2824: cqmghost.exe
2852: svchost.exe
3044: cmd.exe
3052: rotatelogs.exe
3080: cmd.exe
3088: rotatelogs.exe
5452: svchost.exe
5596: GravitixService.exe
7392: csrss.exe
7232: winlogon.exe
6888: csrss.exe
9832: winlogon.exe
10388: wawrapper.exe
10352: cpqnimgt.exe
9496: msiexec.exe
6068: w3wp.exe
4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid: S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank youHi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy -
Can't create a "simple" group/course - and no upload
Hi all,
I'm quite new to this task of managing iTunesU for my institution (ICTP, www.ictp.it), and we just got admitted to the iTunesU platform since few days, so please bear with my poor experience (but I'm carefully reading the guides provided by Apple).
Now... I've had no problem in creating/editing a few test pages/groups/courses, but I'm not able at all to create a "simple" group course, the edit menu only lead me to the two options: "smart" and "feed". And I cannot find the tool menu item to do the "Upload and Manage Files" (I guess it doesn't appear because there are no simple groups, the only ones that can accept manual uploads, am I right?).
Just to explain better: of course I'll eventually implement a transfer script to upload our videos (I'm working on re-encoding some thousands hours of lectures...), but for now I would like to make some preliminary tests, and upload manually a few videos. What am I doing wrong?
Is it possible that maybe our approval is still pending, and I'm not allowed to upload anything? But I can edit the site (but not publish it).
I tried both interfaces, the iTunes.app native and the web one (the "iTunesU Public Site Management" on phobos.apple.com):
the former is more complete but is missing upload option and "simple" group course creation, while the latter gives me only tools to edit the graphic appearance of the main page (banner, styles, etc...).
thank you for any help, it will be appreciated very much!
Carlo,
Trieste (Italy)I think I've found the answer by myself in this thread:
https://discussions.apple.com/thread/2018158?threadID=2018158&tstart=0
Unfortunately, it's not the answer I was hoping for... apparently the option to store contents in Apple's servers isn't available anymore for newcomers to iTunesU.
Now I have to manage a way to do local storage and RSS feeds, new challenge!
Hope this may help others,
Carlo. -
How do I create an email group on iPad 2?
How do I create an email group from email or contacts to send emails to groups of like contacts
It's a comma (or semicolon) rather than a decimal point, if you're doing it manually, but that method does work across iPhone, iPad and iPod touch.
This is actually close to how our "MailShot" app works (unlike most other group email apps) except that MailShot manages the groups for you and makes it easier to delete and add contacts to your groups.
If your groups are small you can try our free version on
http://itunes.apple.com/us/app/mailshot-group-email-done/id410279354?ls=1&mt=8.
There's an upgrade path to the full version if you like it in that app. or you can go straight to the Pro version:
http://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?ls=1&mt =8
Any problems, get in touch on our support email.
Peter
Soluble Apps
Disclosure: I am the developer of MailShot and MailShot Pro and may benefit from their sales. -
How do I create a Public Group on the Calendar Server?
How do I create a Public Group on the Calendar Server?
<P>
Anyone can create Private Groups or Member Only Groups. You must be given
administrative rights to create Public Groups on the Calendar Server. The
Calendar Server Admin (SYSOP) can give anyone rights to create Public Groups by
using the uniadmrights tool.
<P>
Go to /users/unison/bin/
and run the uniadmrights
tool. Some sample syntax:
<P>
To list all users with administrative rights:<P>
% uniadmrights -ls -host yourhostname
<P>
To give John Smith, a user on node 10000, rights to administer Public Groups:<P>
% uniadmrights -e "S=Smith/G=John" -add -pgrp -n 10000
<P>
In Calendar Server 4.0, you also have the option of using the Admin Server GUI
to assign Administrative
rights (instead of using the command-line method) by going to User Management,
Administration Rights.
<P>
With the proper administrative rights, log into the Calendar Client. Go to Options,
Manage Groups to create a new group. Choose PUBLIC from the dropdown window,
add your users and/or resources and click OK to create the Public Group which
can be seen by all users on the local Calendar Server.The following is info that I found in another post that I have been trying to follow.
MrHoffman New England
Re: Configure DNS - OS X Server Next Steps
Feb 13, 2011 6:36 AM (in response to Jimbooooooo)
You're setting up internal DNS services, you referenced your ISP DNS servers and you should not have, and now those servers have no translations for your hosts. This is a common misconfiguration.
See [configuring DNS on Mac OS X Server|http://labs.hoffmanlabs.com/node/1436] for how to set up your internal DNS server.
And if there are any references to your ISP DNS servers here (within your client settings, within your server settings, your Airport settings, etc), then you're usually going to have DNS and connectivity problems. You're running a server now, so you'll be running your own services, and (particularly because of NAT here) referencing only your own DNS server(s).
You may be setting up external DNS (if and when you need that), but that should happen after you set up your internal DNS. The above article has a link to setting up external DNS, when you get around to that, if/when you need in-bound connections into your LAN. -
In Address Book there are groups under "On my Mac" and groups under "iCloud". When I do File -> "Create new group", the new group always goes under "iCloud". How can I make a new group to go under "On my Mac". I also tried dragging the new group from the iCloud area to the "On my Mac" area, but that doesn't do it. Address Book is version 6.1.3. Thanks for your help.
Maybe look in the Preferences > Accounts & disable the iCloud account? That should force it to create a local group then re-enable the iCloud account. I would use the 'File > Export… Addressbook archive' to make a backup before you begin, but it should be fine.
I'm not sure 10.6.8 supported iCloud natively, so perhaps that is why it is being wierd? -
How do I create a contact group mail on iPad?
I would like to create groups from my contact list - when I go into my contact list, on the top left is in blue 'Groups' then 'All Contacts' in black, then '+' in blue - when I click on groups it shows in grey ICLOUD and below 'All Contacts' - over to the right is a blank contact sheet with 'Edit' in blue on the top right - when I tap edit it allows a contact to be added but no way to create a new group - I want to create a new group - info appreciaged - thx - Karen
You cannot create a new group on your iPad without using an app to do so (such as Speed Names). However, you can easily create a group by going to icloud.com from your computer. Open your contacts on icloud.com, tap "+" on the bottom of the left sidebar and select New Group. Give the group a name, then drag and drop the contacts you want to belong to the group on to the group name. The new group will apear on your iOS device.
-
Creating a target group based on the BP email address only in CRM
Hi there,
I am currently trying to create a target group based on the business partner email address only.
I have a list of over 1000 email addresses - these email addresses equate to a BP in our CRM system, however I do not have a list of the equivalent business partner numbers, all I have to work on are the email addresses. With these 1000 BP email addresses I need to update the marketing attributes of each of these 1000 BP records in CRM.
What I need is a method to find the 1000 BP numbers based on the email addresses and then use the marketing expert tool (tx. CRMD_MKT_TOOLS) to change the marketing attributes on all of the 1000 BPs.
The issue I am having is how can I find the list of BP numbers just based on the BP email address, I tried creating an infoset based on table BUT000, BUT020 and ADR6 but I after creating attribute list & data source for this I am stuck on what to do next. In the attribute list the selection criteria does not allow me to import a file for the selection range. I can only enter a value but I have 1000 email addresses and cannot possibly email them manually in the filter for the attribute list. I also looked at imported a file into the target group but I do not have any BP numbers so this will not work.
Does anyone know a method where I can create a target group based on the email addresses only without having to do any code?
Any help would be most appreciated.
Kind regard
JoJoHi JoJo ,
The below report will return you BP GUID from emails that is stored in a single column .xls file and assign the BP to a target group.
REPORT zexcel.
* G L O B A L D A T A D E C L A R A T I O N
TYPE-POOLS : ole2.
TYPES : BEGIN OF typ_xl_line,
email TYPE ad_smtpadr,
END OF typ_xl_line.
TYPES : typ_xl_tab TYPE TABLE OF typ_xl_line.
DATA : t_data TYPE typ_xl_tab,
lt_bu_guid TYPE TABLE OF bu_partner_guid,
ls_bu_guid TYPE bu_partner_guid,
lt_guids TYPE TABLE OF bapi1185_bp,
ls_guids TYPE bapi1185_bp,
lt_return TYPE bapiret2_t.
* S E L E C T I O N S C R E E N L A Y O U T
PARAMETERS : p_xfile TYPE localfile,
p_tgguid TYPE bapi1185_key .
* E V E N T - A T S E L E C T I O N S C R E E N
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_xfile.
CALL FUNCTION 'WS_FILENAME_GET'
IMPORTING
filename = p_xfile
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
IF sy-subrc <> 0.
CLEAR p_xfile.
ENDIF.
* E V E N T - S T A R T O F S E L E C T I O N
START-OF-SELECTION.
* Get data from Excel File
PERFORM sub_import_from_excel USING p_xfile
CHANGING t_data.
SELECT but000~partner_guid FROM but000 INNER JOIN but020 ON
but000~partner =
but020~partner
INNER JOIN adr6 ON but020~addrnumber = adr6~addrnumber INTO TABLE
lt_bu_guid FOR ALL ENTRIES IN t_data WHERE adr6~smtp_addr =
t_data-email.
CLEAR: lt_guids,ls_guids.
LOOP AT lt_bu_guid INTO ls_bu_guid.
ls_guids-bupartnerguid = ls_bu_guid.
APPEND ls_guids TO lt_guids.
ENDLOOP.
CALL FUNCTION 'BAPI_TARGETGROUP_ADD_BP'
EXPORTING
targetgroupguid = p_tgguid
TABLES
return = lt_return
businesspartner = lt_guids.
*& Form SUB_IMPORT_FROM_EXCEL
* text
* -->U_FILE text
* -->C_DATA text
FORM sub_import_from_excel USING u_file TYPE localfile
CHANGING c_data TYPE typ_xl_tab.
CONSTANTS : const_max_row TYPE sy-index VALUE '65536'.
DATA : l_dummy TYPE typ_xl_line,
cnt_cols TYPE i.
DATA : h_excel TYPE ole2_object,
h_wrkbk TYPE ole2_object,
h_cell TYPE ole2_object.
DATA : l_row TYPE sy-index,
l_col TYPE sy-index,
l_value TYPE string.
FIELD-SYMBOLS : <fs_dummy> TYPE ANY.
* Count the number of columns in the internal table.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE l_dummy TO <fs_dummy>.
IF sy-subrc EQ 0.
cnt_cols = sy-index.
ELSE.
EXIT.
ENDIF.
ENDDO.
* Create Excel Application.
CREATE OBJECT h_excel 'Excel.Application'.
CHECK sy-subrc EQ 0.
* Get the Workbook object.
CALL METHOD OF h_excel 'Workbooks' = h_wrkbk.
CHECK sy-subrc EQ 0.
* Open the Workbook specified in the filepath.
CALL METHOD OF h_wrkbk 'Open' EXPORTING #1 = u_file.
CHECK sy-subrc EQ 0.
* For all the rows - Max upto 65536.
DO const_max_row TIMES.
CLEAR l_dummy.
l_row = l_row + 1.
* For all columns in the Internal table.
CLEAR l_col.
DO cnt_cols TIMES.
l_col = l_col + 1.
* Get the corresponding Cell Object.
CALL METHOD OF h_excel 'Cells' = h_cell
EXPORTING #1 = l_row
#2 = l_col.
CHECK sy-subrc EQ 0.
* Get the value of the Cell.
CLEAR l_value.
GET PROPERTY OF h_cell 'Value' = l_value.
CHECK sy-subrc EQ 0.
* Value Assigned ? pass to internal table.
CHECK NOT l_value IS INITIAL.
ASSIGN COMPONENT l_col OF STRUCTURE l_dummy TO <fs_dummy>.
<fs_dummy> = l_value.
ENDDO.
* Check if we have the Work Area populated.
IF NOT l_dummy IS INITIAL.
APPEND l_dummy TO c_data.
ELSE.
EXIT.
ENDIF.
ENDDO.
* Now Free all handles.
FREE OBJECT h_cell.
FREE OBJECT h_wrkbk.
FREE OBJECT h_excel.
ENDFORM. " SUB_IMPORT_FROM_EXCEL
Just copy paste the code and run the report select any local xls file with emails and pass the target group guid.
snap shot of excel file:
Let me know if it was useful. -
Creating a new group in LDAP using JLDAP
Can anybody tell me how to creat a new group in LDAP using JLDAP
Hi,
Have a look at the following link. It will surely help you.
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm</a>
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra
Maybe you are looking for
-
Need Help in dynamic object building and retrieve infos about it
Hello, I'm building a flex project where i want to add tabs to a navigator which contains a text area and 2 buttons. It's ok to build it but my problem is to access to all this data inside the text area.. This is a part of my code to create a new tab
-
Bootcamp XP partition size for OCR software and Outlook
Hello, I need to run OCR software (Abbyy Finereader 9) and Microsoft Outlook email on my Mac. How much space should I partition for Windows XP when setting up Bootcamp? I will eventually use Parallels/VMwareFusion. Specs needed for OCR: 512 MB of RAM
-
When we create a Technical System in the SLD, it will not accept a fully qualified DNS name, the name seems to truncate at the first period. (i.e sdn.sap.com turns into sdn). Does anyone know how to work around this issue other than adding an entry
-
Note 3 Lollipop - No Samsung App Store
What happened to the Samsung App Store or Galaxy App store or Galaxy Essentials or any other name. The point being that after the update i noticed i did not have an icon for the Samsung app store by whatever name they are using. Trying to find it m
-
Received an email with the email subject Id: 846701168 from appleitunes Email address: "AppleiTunes"<[email protected]> Email header info: AppleiTunes Return-path: <[email protected]> Received: from st11p00mm-smtpin012.mac.com ([17.172.87.2