Create connection between 2 backends

Hi ,
I need to create connection between 2 system , do i need to do that via RFC destination
via SM59 ?
if so hOW I can know the IP adress and the the target host between the BE ?
Thanks in advance
Chris

Hi Chris,
normally you find the name of the host in the menue under System -> Status in the field "server name".
The IP adress is normally not needed, if you set the connection up via sm59. You can get the
ip adress if you call a ping with the server name within the network the server is located e.g. "ping hostxyz".
BR, Helmut

Similar Messages

Error while creating connection between Java and ABAP

Experts
I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
5. The host name s09f71v06.svr.bankone.net was resolved successfully.
6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
Please do let m eknow where do I need to check for the errros or logs for the above error message.
Appreciate your quick help.
Mahesh

Check the relevant services are test are active on the Backend system through SICF trransaction.
Also make sure that default icm services are running.See note 517484.
More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
Regards
Ajay

Steps too create connection between OBIEE and Datamart on UNIX box..

Hi experts..
I have created one repository on my windows machine. Now i need to transfer this repositry on UNIX BOX.. So
1. Please tell me the steps to make a connection between OBIEE and datamart.
2. which files i need to transfer from windows machine to UNIX Box..

Are you asking how to connect to an Oracle database from OBIEE in Unix? (Your question is too vague as datamart could mean anything) If so, read this thread:
Re: How to connect Linux OBIEE repository to database?

Steps too create connection between OBIEE and Datamart on UNIX box..Uregnt

Hi experts
I have created my OBIEE repository on windows machine. Now i want to Transfer this repository on unix machine so ....which steps i have to follow..
Thanks in advance
Regards
sunil

Hi Sunil,
Your problem Subject and Description doesnot match. If you need to transfer your RPD from Windows to Unix, here are the steps. In fact there is nothing complicated involved.
Hope you have OBI already installed in the Unix machine,
1. Ftp your RPD from Windows machine to the Unix server.
2. Put it in the $SAROOTDIR/server/Repository path
3. Make changes in the NQSConfig.ini file, if needed
4. Bounce the OBI Admin service
But if you need to change the connection pool details on Unix, that is another story altogether.
Regards,

Direct connection between 2 clients without any configuration!

I wan to make a system act like hamachi or logmein (websever & clients).
I have a webserver on the internet and two client from different networks connected to this webserver, now i want to make directly connection between these clients without any configuration on router. I think it is possible because all infomation about clients network could be got from http request which they send to server. But i don't know what exact fields in the header of http request that i need and how to set them to create connection between clients. I need some ideas about this issue.
Edited by: tulous on Nov 20, 2008 7:40 PM
Edited by: tulous on Nov 20, 2008 7:41 PM

tulous wrote:
I know, so if you want to use a remote control tool such as: VNC, remote desktop you must config on router or server. But even if you had a proxy(permit port 80) when you type www.sun.com you will get data from it, this data was sent from Sun to your proxy and in some way the data was return to your browser. So i think if we have enough information(it come from the webserver) we could init a connection between 2 client. An example of this is Hamachi.
At first 2 hamachi clients connect to a server of hamachi, when they have their id, a tunnel between 2 clients was established without any configuration on proxy(certainly that server did not deny port of hamachi). From now 2 clients can exchange data not through the server. The same in logmein, you can remote desktop any where with zero configuration, but the speed is guarantee because they contact to server for query information, but the data was transmited directly. Sorry if i make mistake.It doesn't work the way you think.
There is a proxy or you have to have one side listening with a ServerSocket and have ports opened as needed. You can't create a Socket connection on server A between clients B and C and then pass it off to clients B and C and magically they just talk to each other.
It does not work that way. It is impossible to do it that way.

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to create ODBC connection between Oracle 10g and MS SQL Server

Hi,
Can someone help us with the steps to create an ODBC connection between Oracle APPS using Oracle 10g database and MS SQL Server.
Requirement is to extract the transactional data from MS SQL Server on a daily basis and dump it into Oracle tables for an interface to be run. Currently it is being done through Dataloader tool which we feel is causing the data issue with Arabic characters. We want to create the ODBC directly between Oracle and MS SQL Server and check if the data is being pulled correctly.
The data is in sql server 2000 which has data in Arabic_CI_AS character set which is moved to Oracle 10.2.0.3 database with characterset AL32UTF8. The table data is moved to oracle using the dataloader 3.6 standard edition licensed version. We cannot change the character set of Sql Server 2000.
Please help
Thanks
Shanil

Hi,
If you're trying to PULL data from SQLServer into an Oracle database, you wouldnt use Oracle ODBC driver for that, so you may want to post in the Heterogeneous Services forum instead:
Heterogeneous Connectivity
If you're trying to PUSH data from SQLServer into an Oracle database, you could use ODBC but most folks use OLEDB for that, and the following note on MOS should help:
How to Create a Sql Server Linked Server With The Oracle Provider for OLE DB (Doc ID 191368.1)
As with any NLS related issue, the first thing to do is dump the codepoints of the data in the Oracle database to see if it is stored validly, rather than relying on what the data "looks like" from some tool or other. It's best to check a single row, with only a few characters in it if you can, and you can do that via
SELECT DUMP(<columname>,1016) FROM <tablename> WHERE ...
Hope it helps,
Greg

How to create more than one connections between my host and server

Hi,
I want to create multiple connections(at least, two connections) between my host and the server.
And use them to transfer data at the same time.
Could you help me, and could you give me a sample code example?
^-^
Thank you very much

import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.net.*;
import java.io.*;
import java.nio.channels.*;
import javax.swing.*;
   This program shows how to interrupt a socket channel.
public class InterruptibleSocketTest
   public static void main(String[] args)
      JFrame frame = new InterruptibleSocketFrame();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.setVisible(true);
class InterruptibleSocketFrame extends JFrame
   public InterruptibleSocketFrame()
      setSize(WIDTH, HEIGHT);
      setTitle("InterruptibleSocketTest");
      JPanel northPanel = new JPanel();
      add(northPanel, BorderLayout.NORTH);
      messages = new JTextArea();
      add(new JScrollPane(messages));
      busyBox = new JCheckBox("Busy");
      northPanel.add(busyBox);
      startButton = new JButton("Start");
      northPanel.add(startButton);
      startButton.addActionListener(new
         ActionListener()
            public void actionPerformed(ActionEvent event)
//               startButton.setEnabled(false);
               cancelButton.setEnabled(true);
               connectThread = new Thread(new
                  Runnable()
                     public void run()
                        connect();
               connectThread.start();
      cancelButton = new JButton("Cancel");
      cancelButton.setEnabled(false);
      northPanel.add(cancelButton);
      cancelButton.addActionListener(new
         ActionListener()
            public void actionPerformed(ActionEvent event)
               connectThread.interrupt();
               startButton.setEnabled(true);
               cancelButton.setEnabled(false);
        new Thread(new TestServer(Port)).start();
      Connects to the test server.
   public void connect()
       new Thread(new Client(Port)).start();
//       Port++;
   class Client implements Runnable{
           Client(int port){
               this.port = port;
           private Scanner in;
       private int port;
        public void run() {
                try
                   SocketChannel channel = SocketChannel.open(new InetSocketAddress("localhost", port));
                   try
                      in = new Scanner(channel);
                      while (true)
                           try{
                              if (in.hasNextLine())
                                 String line = in.nextLine();
                                 System.out.println(line + " " + channel);
     //                            messages.append(line);
     //                            messages.append("\n");
                              else Thread.sleep(100);
                           }catch(Exception e){
                                e.printStackTrace();
                   }finally
                        messages.append("Socket closed\n" + channel);
                      channel.close();
                catch (IOException e)
                   messages.append("\nInterruptibleSocketTest.connect: " + e);
      A multithreaded server that listens to port 8189 and sends random numbers to the client.
   class TestServer implements Runnable
          ServerSocket s;
          private int port;
          TestServer(int port){
              this.port = port;
              try {
               s = new ServerSocket(port);
          } catch (IOException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
      public void run()
         try
            int i = 1;
            while (true)
               Socket incoming = s.accept();
               Runnable r = new RandomNumberHandler(incoming);
               Thread t = new Thread(r);
               t.start();
         catch (IOException e)
            messages.append("\nTestServer.run: " + e);
      This class handles the client input for one server socket connection.
   class RandomNumberHandler implements Runnable
         Constructs a handler.
         @param i the incoming socket
      public RandomNumberHandler(Socket i)
         incoming = i;
      public void run()
         try
              int i = 0;
            OutputStream outStream = incoming.getOutputStream();
            PrintWriter out = new PrintWriter(outStream, true /* autoFlush */);
            while (true)
               out.println(i);
               i++;
               Thread.sleep(100);
         catch (IOException e)
            messages.append("\nRandomNumberHandler.run: " + e);
         catch (InterruptedException e)
            messages.append("\nRandomNumberHandler.run: " + e);
      private Socket incoming;
   private JButton startButton;
   private JButton cancelButton;
   private JCheckBox busyBox;
   private JTextArea messages;
   private TestServer server;
   private Thread connectThread;
   public static final int WIDTH = 300;
   public static final int HEIGHT = 300;
   public static int Port = 8848;

Create JNDI Connection Between MSAcess and BIPublisher

Hi,
Can Anyone guide me in establishing the connection between MSAcess database and BIPublisher.
I had tried by creating the JNDI where i had the details DSN and i am not sore of JNDI name. What can i provide for JNDI Name?
Any pointers on this is of Great Help!!!!!!!

Please post your question here:
BI Publisher
This is the BI Apps forum.

No connection between ECC and PI

Hello,
I have developed proxy to file interface but I am not able to see any data flow between backend ECC and PI systems. I have gone through different blogs and forum threads to troubleshoot... creating RFC destinations, testing through RWB message, SLD configurations, SICF, etc. but I am not able to see any data going out of or into ECC. When I check SXMB_MONI or RWB message monitoring, I don't see any message either failed or success.
I don't think ECC is connecting to PI. I am able to create proxy in ECC and configure both inbound and outbound proxy but I don't see any data go through ECC. I am able to import RFC and IDocs in Integration Repository. Can anyone suggest what could be the problem and how to resolve it?
Thank you!

Hello,
I created a new test interface - File to RFC and tried to test it by sending payload from RWB and got the following error. I already checked that the host file has the server name and IP address entries.
Adapter Framework caught exception: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=HOSTNAME SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2
Delivering the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.adapter.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.adapter.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=hostname SYSNR=30 GWHOST=hostname GWSERV=sapgw30 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '192.168.131.3:sapgw30' not reached TIME Mon Sep 26 13:51:26 2011 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3133 DETAIL NiPConnect2: 192.168.131.3:3330 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 2 .

Connection between O and BP is missing

Hi,
When i check inconsistency for a user, i am getting " Connection between "O" and "BP" is missing. When i check the Org.unit in PPOSA_BBP, i could see no BP exists for that Org.unit where user is assigned. I have replicated the org.unit from HR system but yet the BP hasnt been generated. Can you please share your idea on this.
Regards,
Prasath J

Hi Prasath,
This might be because you need to assign the user to a Purchasing Organisation or a Purchasing Group. If the user do not have BP created then you can do this by using tcode USERS_GEN.
Go to USERS_GEN and follow below steps :
1. Select Create User From Existing SU01 user
2. Enter the org id of the POrg or Pgroup under which you want to assign the user
3. Select country and execute
4. In next window one popup will occur, select Area Of User
5. In next popup enter the user id
6. Next select the user and click Ok.
7. This will create a BP and CP for the user and assigns the BP to the Org id of the POrg or Pgroup.
8. Now check the consistency of the user it will show all green.
It might give you error like eMail id for BP XXXXX is missing if the SU01 profile of the user does not contain any user id but it is not critical.
You can open the BP in BP tcode and enter the email id of the user.
Let us know if it solves your issue.
Regards,
Mayur

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

How can i create link between ipad(xcode) and webserver?

Hi, I'm a new to iPad development and i need help,
i'm not good with english but i try to explain my question:
how can i create link between ipad(xcode) and webserver?
(the webserver ".NET" with driver odbc is connected with DB Oracle)
so, how can my ipad application access to the Oracle DB?
Create a webservice (.NET) to be place between iPad and DB, is this correct?
how can i do it?
which are libraries to include in the xcode's framework?
thx

I think the following URL will be your best answer:
http://stackoverflow.com/questions/3510468/connecting-iphone-to-an-odbc-database

Open connections between AS Java and AS ABAP when using JRA

Hi, we have a problem with open connections and hope that someone here could give me hint where to find a solution.
The situation is that we open a connection from a Java application to an AS ABAP. In detail, the application first connects to a statefull session bean on the AS Java by RMI. The bean communicates with the associated AS ABAP by the Java Resource Adapter (JRA).
All interactions between all components work correctly. But even after we close the application, manually close of the connections (on side of the AS Java) , remove all created and used session beans there are still open connections between the AS ABAP and the AS Java.
The transaction smgw (Gateway Monitor) shows open connections from jlaunch to our local SAP gateway using the internal communication protocol. Obviously, the established connections are not closed, even when they are open for a week or longer.
After opening 100 connections, the AS ABAP denies additional connection attempts.
We have been able to close all open connections by restarting the AS Java or by restarting the Connector over the Visual Administrator (path: Cluster Server Services Connector Container select the right connector stop / start).
We have developed our application similar to the tutorial from [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4]
Can someone explain to us why the connections stay open for so long? Is there no timeout mechanism? Or is there some way to close the connections from our Java application?

Hello,
maybe someone can help us with our problem.
We have developed our application similar to the tutorial from https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad09cd07-0a01-0010-93a9-933e247d3ba4 and it was running without problem with the SP12, now we change our system to SP16 and we are having the problem described in note 1083348, but as you can see, for us it was working with SP12 and now it doesn't work with SP16....
Here is part of our code....
    public List getAll() {
        String functionName = "bla";
        try {
            openConnection();
            MappedRecord response = (MappedRecord) interaction.execute(null, request);
            MappedRecord record = (MappedRecord) response.get("E_S_RETURN_CODE");
            if (((String) record.get("RETURN_CODE")).equalsIgnoreCase("E")) {
                throw new SQLException((String) record.get("RETURN_TXT"));
        catch (ResourceException exc) {
            throw new EJBException(".");
        catch (SQLException exc) {
            throw new EJBException(".");
        finally {
            closeConnection();
    protected void openConnection() {
        try {
            connection = connectionFactory.getConnection();
            interaction = connection.createInteraction();
        catch (ResourceException exc) {
            interaction = null;
            connection = null;
            throw new EJBException(getExceptionText(exc));
protected void closeConnection() {
       try {
            if (interaction != null) {
                interaction.close();
            if (connection != null) {
                connection.close();
        catch (ResourceException exc) {
            throw new EJBException(".");
With that code we are getting this error: "Connection handle is already closed and no longer associated with a managed connection" everytime we try to close the connection in the method closeConnection().
We were thinking that maybe we should not close the connections, because the were already close, and tried not to close the connection (connection.close()), but then after a few time we are getting the following error, because we are not closing the connections:
Connection to ABAP System could not be opened, because the Connection Factory returns "Cannot get connection for 120 seconds. Possible reasons: 1) Connections are cached within SystemThread(can be any server service or any code invoked within SystemThread in the SAP J2EE Engine), 2) The pool size of adapter "eis/..." is not enough according to the current load of the system or 3) The specified time to wait for connection is not enough according to the pool size and current load of the system. In case 1) the solution is to check for cached connections using the Connector Service list-conns command, in case 2) to increase the size of the pool and in case 3) to increase the time to wait for connection property. In case of application thread, there is an automatic mechanism which detects unclosed connections and unfinished transactions.". Please check the connection defined for the Connection Factory of the Java Resource Adapter with JNDI name...
Any help?

Create connection between 2 backends

Similar Messages

Maybe you are looking for