Create New Bpel Domain

Hi All-
How to create a new BPEL domain, I have tried in 10.1.3.3 and 10.1.3.4 also in BPEL console but didn't found anything for creating new domain.
Please help.
Regards,
Sreejit

Hi Sreejit,
Please note that you will have to give BPELConsole to log into your console, to initiate, view, manage the processes, see the sudit flow,...
You have to loginto BPELAdmin(type in URL), to log into the admin page where you have server confi parameters, domain level loggers, manage domains,...
Cheers
A

Similar Messages

How to create a new BPEL Domain

Hi,
Need a huge favor... thanks in advance..
Database - 10.2.0.2.0
BPEL (SOA Suite) -- 10.1.3.0
a) Installation went fine
b) Able to use the software using the url provided at the end of installtion
c) I want to create a NEW BPEL domain.
When I create new domain, it gives the below errors..
Exception
Operation failed because:
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "java.sql.SQLException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1029)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1126)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3043)
at oracle_jdbc_driver_T4CPreparedStatement_Proxy.executeQuery()
at com.collaxa.cube.admin.data.DomainConfigManager.loadProperties(DomainConfigManager.java:203)
at com.collaxa.cube.engine.CubeEngine.load(CubeEngine.java:423)
at com.collaxa.cube.admin.ServerManager.loadDomain(ServerManager.java:1111)
at com.collaxa.cube.admin.ServerManager.createDomain(ServerManager.java:731)
at com.collaxa.cube.admin.ServerManager.createDomain(ServerManager.java:617)
at com.collaxa.cube.ejb.impl.ServerBean.createDomain(ServerBean.java:181)
at sun.reflect.GeneratedMethodAccessor31.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:620)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:43)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at ServerBean_RemoteProxy_4bin6i8.createDomain(Unknown Source)
at com.oracle.bpel.client.Server.createDomain(Server.java:327)
at _doCreateDomain._jspService(_doCreateDomain.java:89)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Exception: java.sql.SQLException: ORA-00942: table or view does not exist
Handled As: com.collaxa.cube.CubeException
THANKS
Rgds
Natrajan
Also.. Here are the details of BPEL create domain screen..
Create New BPEL Domain
BPEL Domain is a logical grouping of processes, instances and activities. A domain may be accessed either by the domain or administrative password.
Domain Id: <<Nattest>>
Each domain requires access to a JDBC datasource to store instances and activities. Tx Datasource JNDI must refer to a datasource with JTA support. Datasource JNDI may refer to any datasource (JTA not required).
Datasource JNDI: <<<<JUST took default..>>>
Tx Datasource JNDI: <<JUST took default>>>

I've seen this if the database is down or in a funky state. Try shutting down BPEL, and restart the database, then bring BPEL back up. If you're using Oracle Lite just use the "Stop SOA Suite" GUI from the Start Menu.

Create a BPEL Domain

I want to create a new BPEL Domain in Oracle BPEL Process Manager.Click "Create New
BPEL Domain",and follow the on-screen instructions to create a new domain with an ID and a password (ID="myDomain" password="123").Complete this，I can login in with the new Domain ID,but after restart the Oracle BPEL Process Manager,I cannot login in,it prompt that my password is wrong.

PS:my Oracle BPEL Process Manager's version is 10.1.2.0.2

Error creating a new BPEL domain in a 2 server environment with common DS

I want to create two new BPEL domains, one for production and one for test env
instead of using the default domain.
There are two application servers with BPEL PM (10.1.2.0.2) using the same
Dehydration Store. Active-Active mode, no cluster.
A new BPEL domain is created successfully with BPEL Admin Console in server A.
The problem is the server B knows nothing about the new domain. I cannot select
the new domain on BPEL Console login page on server B.
When I tried to create the same domain in server B the following error
occured:
Exception
Operation failed because:
Error updating domain index.
An exception occurred while writing the domain index (id"szolinfo", ref "1") to
the datastore; the exception reported is: ORA-00001: unique constraint
(ORABPEL.DOM_PK) violated
Please check that:
+ the machine hosting the datasource is physically connected to the
network.
+ the connection pool properties as defined in the application server
startup properties are valid.
+ the database schema for the OraBPEL server has been installed in the
datasource.
This is because the two servers are using the same database.
The new domain require a new folder and a lot of files also inside the domains
folder on server A and B. On server A this is created by BPEL Admin Console.
How to create the same domain in server B?
Are there any scripts/tools to use for this reason?

These steps on Server B resolved the problem:
1: cp -r domains/default domains/<new-domain-name>
2. cd domain/<new-domain-name>/config
3. Edit the following files by replacing the string 'default' with the name of your
new created domain in the following
elements/attributes:
archive-config.xml: <value>/home/mla/app/bpel101202/integration/orabpel/domains/de
fault/archive</value>
domain.xml: <bpel-domain-descriptor version="2.0.6" id="default">
4: In the case that the password for the domain is different compared to the default domain, the file 'auth.properties' has
to be copied over from the server where the domain was created.
5. Restart the BPEL PM

New BPEL Domain password

Hi,
While creating BPEL domain it say that "A domain can be accessed either by the domain or administrative password".
But when we are creating a new domain it doesn't ask for password for particular domain, how to create a password for Domain, so that I don't have to access it using administrative password.
Any idea, Please suggest.
Thanks in advance.
Regards,
Sreejit

Hi Sreejit,
This is documented in : http://download.oracle.com/docs/cd/E12483_01/integrate.1013/b28982/security.htm#CHDJCIJA
Hope that solves your issue!
Cheers
A

Creating New Dictionary Domain

Hello there,
I have created a new dictionary domain ZZGROUP with a definition of Char 20. When I double
click this I can see the number of characters and displayed output length both set to 20.
When I click on the Value Range tab which allows me to enter a fixed value list, the output
length displays only 10 characters. I can't expand this to the 20 characters that I need.
Can anyone explain this?
thanks
Andy

hi andy check this...
http://help.sap.com/saphelp_nw04/helpdata/en/e2/66708f730811d2959500a0c929b3c3/frameset.htm
in this->choose creating domains in the left pane>go to Other Options-->Restrict output length..
hope this clarifies your doubt..
regards,
venkat

Error creating new domain (probably because of incomplete install)

Hi!
I've installed BPEL PM without problems on a server where AS already runs. I only had some problems with Step 2: Run the Integration Repository Creation Assistant on the Database. Since I couldn't run the bat files, I manually created shchema and a orabpel user.
Postinstallation Verification Tasks for Oracle BPEL Process Manager in BPEL Process Manager Installation Guide went through OK, so I thought everything is OK.
Then I tried creating new BPEL domain (trying to follow GoogleFlow tutorial but can't deploy because I don't have any domains) and got this error:
Exception
Operation failed because:
Error updating domain index.
An exception occurred while writing the domain index (id"GoogleDomain", ref "1") to the datastore; the exception reported is: ORA-00942: table or view does not exist.
Please check that:
+ the machine hosting the datasource is physically connected to the network.
+ the connection pool properties as defined in the application server startup properties are valid.
+ the database schema for the OraBPEL server has been installed in the datasource.
So I found a similar thread (Strange message when logged in to bpel console where one user had similar problems and solved them by manually running the domain_oracle.ddl script. I did the same, but still can't create a new domain.
One more thing bothers me: if I try to create new domain with the same name I get:
Exception
Operation failed because:
Domain already exists.
A domain with identifier "GoogleFlowDomain" already exists at "C:\OracleAS\10.1.3.1\OracleAS_1\bpel\domains\GoogleFlowDomain". Please specify another domain identifier.
But deployed domains list is empty.
I'd really like to solve this. Maybe a new BPEL PM install would help but I can't execute step 2 of preinstallation tasks. If I execute the line from irca file
java -classpath %CLASSPATH% -DORACLE_HOME=%ORACLE_HOME% oracle.tip.install.tasks.IRCA %*
I get
Exception in thread "main" java.lang.NoClassDefFoundError: Files\Java\jre1/5/0_06\lib\ext\QTJava/zip
Any kind of further instructions would be much appreciated.
Regards!
BB

Hi!
It was the Step 2 (preinstallation steps): Run the Integration Repository Creation Assistant on the Database step that was causing all of my problems. I figured out why I couldn't run irca.bat file.
The problem was in java home that was in C:/Program Files/Java... Looks like java or oracle (I don't know which) still have problems with spaces in directories names. When I installed Java to C:/Java/..., I could run IRCA and after reinstallation of BPEL PM everything is working as it should.
Maybe this will help someone else.
Bye

Cannot create BPEL domain in SoaSuite 10.1.3.5.0

Hi all,
I'm having problems creating BPEL domains.
Here's my situation:
I installed a fresh Soa Suite 10.1.3.1 on a Windows environment and upgraded to 10.1.3.5.0. Before patching to 10.1.3.5.0 creating BPEL domains works fine.
However, after the upgrade to 10.1.3.5.0, when I try to create a new BPEL domain using the BPEL admin console I get an error: jsBundle is not defined.
The error occurs when I hit the 'Create' button and the javascript calls the validation function (getLocalizedString).
Has anyone else experienced this behaviour? Any help would be appreciated
Thanks in advance,
Rob de Haan
Edited by: user10750516 on 16-feb-2010 23:56

Are you trying out the non English version of the admin interface?
Other users have problems and looks like localization bundles are missing in 10.1.3.5.
Check this thread: {thread:id=1013311} and then metalink, oracle support is your next stop to search for the TAR SR:)
Regards,
Shanmu.

Best practice for using different BPEL domains

Hi BPEL community,
I'm interested in your experience of creating different BPEL domains for grouping your BPEL processes in an enterprise SOA way.
Background is that we have different projects with many BPEL processes and want to find an ideal grouping for them.
Some thoughts are:
- group by project
- group by business domain
- group by characteristics and requirements (long-running, short-running, ...)
Please post your recommendations and experiences!
Best regards,
Harald

publish/subscribe, right?
lots of subscribers, big messages == lots of network traffic.
it's a wide open question, no?
%

Enable new Child Domain in Lync Server 2013

Hello All,
We are running Lync server 2013 in the Root Domain test.local. There are number of child domain enabled for Lync service . Eg: abc.test.local , xyz.test.local etc. Now i have a requirement to create new child domain and enable it for lync service.
So i created a new child domain (site1.test.local), then from lync shell i run below command to enable it.
Enable-CsAdDomain
–Domain site1.test.local –report c:\users\lyncadmin\Report1.html
Then i add the new SIP domain in topology builder in SIP doamin and
Simple URLs and publish the topology.
On AD all users are created in OU so i run below command to give privileges on OU:
Grant-CsOUPermission -Domain site1.test.local -ObjectType "User" -OU "OU=SITEUsers,DC=Site1,DC=TEST,DC=LOCAL"
After all the step , when i try to login the new users, Users are not logging , in Lync client logs it is giving below error:
4005;reason="Destination URI either not enabled for SIP or does not exist";source="LYNCFE13-02.TEST.LOCAL"
Please help to solve this issue .

I can see my child domain accounts in Lync control panel (enable user section) and all accounts are enabled. If i run below command then it show result = failure. But my others account are working.
PS C:\Users\administrator> Test-CSRegistration -UserSipAddress [email protected] -TargetFQDN xxxx.xxxx.localTarget Fqdn : xxx.xxx.local Result: Failure Latency : 00:00:00Error Message : 504, Server time-out Diagnosis: ErrorCode=1045,Source=LYNCFE-00.xxxx.xxxx,Reason=Local edge server pool is out of service,port=5061,pool-size=2,pool=xxx-Edges.xxxx.local Microsoft.Rtc.Signaling.DiagnosticHeader
Other accounts are giving SUCCESS msg and running without any issue.

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

API for creating new User in Oracle E-Business Suite through BPEL

Hello,
I would like to use a BPEL process to create a new User in Oracle E-Business Suite. In the Integration Repository I was able to find an API called FND_USER_PKG/LOAD_ROW that creates/updates Application's User data. Is this the API I should be using? If so, I would like to better understand how to use this API.
I have created a simple BPEL process and added an Oracle Application Service, which uses this FND_USER_PKG/LOAD_ROW API. I set the following parameter before Invoking the Oracle Application Service: X_USER_NAME, X_ENCRYPTED_USER_PASSWORD and X_START_DATE. When I run the BPEL process I get the following error. I suspect that I am not passing all the required input parameters. Does anyone have any sample data I can use to get this API to load correctly? If I am using the wrong API, please let me know.
Please note, I have also posted this question to the SOA Suite and BPEL discussion forums...
Thank you kindly!
Christine
- <input>
- <Invoke_OracleEBS_SecurityUser_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/">
<db:X_USER_NAME>
CRILEY
</db:X_USER_NAME>
<db:X_ENCRYPTED_USER_PASSWORD>
CRILEY
</db:X_ENCRYPTED_USER_PASSWORD>
<db:X_START_DATE>
2009-01-01
</db:X_START_DATE>
</InputParameters>
</part>
</Invoke_OracleEBS_SecurityUser_InputVariable>
</input>
- <fault>
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="code">
<code>
20001
</code>
</part>
- <part name="summary">
<summary>
file:/E:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_SecurityUser.wsdl OracleEBS_SecurityUser_ptt::OracleEBS_SecurityUser(InputParameters) - WSIF JCA Execute of operation 'OracleEBS_SecurityUser' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.FND_USER_PKG.LOAD_ROW API. Cause: java.sql.SQLException: ORA-20001: APP-FND-02600: Unable to create user CRILEY due to the following reason(s):
Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
An unexpected error occurred. Please contact your System Administrator...
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 783
ORA-06512: at "APPS.FND_USER_PKG", line 916
ORA-06512: at "APPS.FND_USER_PKG", line 1035
ORA-06512: at "APPS.FND_USER_PKG", line 645
ORA-06512: at line 1

Hello and thank you for your response. I am new to using APIs so please excuse my inexperience... I am not sure how to run the API outside of BPEL... Is that something you could easily walk me through?
I have made the following changes in BPEL based on your recommendation: 1) Added Oracle Application Service and used the API, LDAP_WRAPPER_CREATE_USER, found in the Oracle Application Module Browser* under: Applications Technology (ATG_PF)> User Management (UMX)> User (FND_USER)> PLSQL> User (FND_USER_PKG)> LDAP_WRAPPER_CREATE_USER
2) Set the following parameter prior to Invoking the Oracle App Service: X_USER_NAME, X_UNENCRYPTED_PASSWORD,X_START_DATE, X_END_DATE, X_DESCRIPTION, X_EMAIL_ADDRESS, X_FAX, X_EXPIRE_PWD.
3) Deploy and run BPEL through BPEL Control.
I get the following {color:#ff0000}error on the Invoke{color}. {color:#339966}Do you see any issues with the values I am passing in the input{color}? Any idea why I am getting this error? Is there anything that I need to have configured for the API to work correctly, other than adding an Oracle Application Service in the BPEL?
Thank you for your time,
Christine
bq. Faulted while invoking operation "OracleEBS_LDAP_Create_User" on provider "OracleEBS_LDAP_Create_User". \\ - <messages> \\ - <input> \\ - <Invoke_OracleEBS_LDAP_Create_User_InputVariable> \\ - <part xmlns:xsi="[http://www.w3.org/2001/XMLSchema-instance]" name="InputParameters"> \\ - <{color:#339966}InputParameters{color} xmlns:db="[http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LDAP_WRAPPER_CREATE_USER/]" xmlns="[http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LDAP_WRAPPER_CREATE_USER/]"> \\ <db:X_USER_NAME> \\ CRILEY \\ </db:X_USER_NAME> \\ <db:X_UNENCRYPTED_PASSWORD> \\ CRILEY \\ </db:X_UNENCRYPTED_PASSWORD> \\ <db:X_START_DATE> \\ 2009-01-01 \\ </db:X_START_DATE> \\ <db:X_END_DATE> \\ 2010-01-01 \\ </db:X_END_DATE> \\ <db:X_DESCRIPTION> \\ CRILEY \\ </db:X_DESCRIPTION> \\ <db:X_EMAIL_ADDRESS> \\[[email protected]|mailto:[email protected]] \\ </db:X_EMAIL_ADDRESS> \\ <db:X_FAX> \\ 999-888-7777 \\ </db:X_FAX> \\ <db:X_EXPIRE_PWD> \\ 0 \\ </db:X_EXPIRE_PWD> \\ </InputParameters> \\ </part> \\ </Invoke_OracleEBS_LDAP_Create_User_InputVariable> \\ </input> \\ - <fault> \\ - <bindingFault xmlns="[http://schemas.oracle.com/bpel/extension]"> \\ - <part name="code"> \\ <code> \\ 20001 \\ </code> \\ </part> \\ - <part name="summary"> \\ <summary> \\ file:/D:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_LDAP_Create_User.wsdl [OracleEBS_LDAP_Create_User_ptt::OracleEBS_LDAP_Create_User(InputParameters) |http://forums.oracle.com/forums/]- WSIF JCA Execute of operation 'OracleEBS_LDAP_Create_User' failed due to: Error while trying to prepare and execute an API. \\ An error occurred while preparing and executing the APPS.FND_USER_PKG.LDAP_WRAPPER_CREATE_USER API. Cause: java.sql.SQLException: ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason: \\ ORA-20001: {color:#ff0000}Unabled to call fnd_ldap_wrapper.create_user due to the following reason: \\ An unexpected error occurred. Please contact your System Administrator.. \\ {color}ORA-06512: at "APPS.APP_EXCEPTION", line 72 \\ ORA-06512: at "APPS.FND_USER_PKG", line 3877 \\ ORA-06512: at line 1 \\\\ ;
Edited by: Christine Riley on Jan 28, 2009 1:22 PM
Edited by: Christine Riley on Jan 28, 2009 1:26 PM

Creating BPEL Domain

Hi,
While creating BPEL domain in a clustered environment, I got the following message "Please verify that BPEL schema has been installed in the datasource referred to by xxxxxxxxx... The schema files are located under <home>/system/database/scripts".
Can some one tell me what the above message mean please.
I continued by clicking OK. The domains are created. Is creating domain on 1 server sufficient in clustered environment ?
I observed that when I created domain in just 1 server, the domains I created were seen the admin console of 2nd server also. Does creating new domain require server restart ?

Hi
I saw this behaviour in 10.1.3.1 as well. We have just patched up 10.1.3.3.1 and was hoping this will be addressed. It was not. :-(
You should be able to work-around the not-found error by just correcting the URL in your browser. You will notice that all that went wrong is that it now has the domain name in all lower-case and since this is case sensitive it fails.
We have stopped using mixed-case/uppercase domain names for now.
It seems like a console only issue as the deployed BPEL process was working fine and callable on the mixed-case URL.
Hope this helps.

Error while creating a new BPEL project

Hello!
When I create a new BPEL project, I get this message: "Object expected", and on the footnotes, the following message is printed: "event://LogErrorEvent?bpelz.html trapped at 62: object expected"...
Does anybody knows what is happening?
Thanks in advance,
Pedro Catoira

hello Pedro,
Try to see this link in the forum:
BPEL Designer Process problem
It seem the same problem but I'm not sure...
byebye
Andrea

How can I create a new Security Domain ?

Hi everyone,
I would like to know how can I create an Security Domain other than ISD ?(If my card support multi SD and delegated management)
I read Global Platform v2.1.1 ,but I don't know how can I create new SD practically(how can I write it's code ,how can I install it and how can I associate an applet to it,...).
if there is any document or link can help me ,please inform me.
I'll appreciate for any one if explain it to me step by step.
yours sincerely.
Orchid.

You're right, it is not visible looking at your script, but at the APDU log. /card is an internal JCShell script to do the following:
cm> /card
resetCard with timeout: 0 (ms)First the card is reset. This is analogous with /atr
--Waiting for card...
ATR=3B FA 13 00 00 81 31 FE 45 4A 43 4F 50 34 31 56    ;.....1.EJCOP41V
    32 33 31 97                                        231.
ATR: T=1, FI=1/DI=3 (93clk/etu), N=0, IFSC=254, BWI=4/CWI=5, Hist="JCOP41V231"Then an /identify command is issued.
=> 00 A4 04 00 09 A0 00 00 01 67 41 30 00 FF          .........gA0..
(163429 nsec)
<= 09 01 01 29 00 00 00 00 50 48 36 35 30 41 00 00    ...)....PH650A..
    6A 82                                              j.
Status: File not foundNow the Issuer Security Domain (ISD) is selected. You can do the same sending the JCShell 'select' command.
=> 00 A4 04 00 07 A0 00 00 00 03 00 00 00             .............
(650082 nsec)
<= 6F 65 84 08 A0 00 00 00 03 00 00 00 A5 59 9F 65    oe...........Y.e
    01 FF 9F 6E 06 40 51 70 92 29 00 73 4A 06 07 2A    ...n.@Qp.).sJ..*
    86 48 86 FC 6B 01 60 0C 06 0A 2A 86 48 86 FC 6B    .H..k.`...*.H..k
    02 02 01 01 63 09 06 07 2A 86 48 86 FC 6B 03 64    ....c...*.H..k.d
    0B 06 09 2A 86 48 86 FC 6B 04 02 15 65 0B 06 09    ...*.H..k...e...
    2B 85 10 86 48 64 02 01 03 66 0C 06 0A 2B 06 01    +...Hd...f...+..
    04 01 2A 02 6E 01 02 90 00                         ..*.n....
Status: No ErrorThe answer is the File Control Information (FCI) returned by the ISD. The format is also described in GP.

Create New Bpel Domain

Similar Messages

Maybe you are looking for