Create prospect customer from UI

Hello to All,
Does anyone know how to create a prospect customer from UI?
Thank you in advance,
Roula

Hi Roula,
Please, see OSS Note 1129682. The correct authorization object is CRM_BPROLE for WEB UI.
I have completed similar requirement in our CRM 2007 WEB UI.
I have maintained CRM_BPROLE authorization object for users with the following values:
Activity: 02 (Change)
Value: ZBP02 (Prospect).
and
Activity: 03 (Display)
Value: ZCRM01 (Sold-To).
Also, please activate the badi Implementation - BADI_CRM_BP_FILTER_ATTRIBUTE for BADI_CRM_BUPA_FILTER_BPROLE.
spro->CRM->Master Data->Business Partner->Business Add Ins->Implementation:Filtering of BP Roles by Authorization check.
Let me know if it helps.
Regards,
Vadim.
Edited by: vadim0770 on Oct 28, 2009 4:37 PM

Similar Messages

How to create a customer from a BP in ECC

Hi Gurus,
I have created a BP customer in SAP and assigned the commission contract role. I made the number range external. This business partner needs to be set up as a customer too. So I used ZD09 account group for the customer and made that number range internal. After I create the BP, how do I create the customer with reference to the BP? I checked the flag in configuration for the BP and customer number to be the same.

Hi
i hope your question is right.
here you are creating one BP with external number ranges and one Customer with internal number ranges.
here roles of these two business persons will be different.
because you have created with an intention that two business partners will do different roles right.
Business partner needs to be set as customer u2013 yes you can do it.
You can copy customer with reference to BP but the result is also same means all the partners with BP and the number will be different by copying it.
regards
balajia

R/3 to CRM: Automatic replication of Prospect customer

Hi Guys
We are downloading Business Partner data from R/3 to CRM , Manual download of BP'S (Initial Load->start) is working fine . we are creating prospect customer in R/3 through CRM Action Box call the moment we create the prospect customer in R/3 it should automatically replicate in CRM with out initiating manual down load .
pls help what settings to be done inorder to download BP'S automatically
Thanks in advance
Warm regards
Rajasekhar

Hi madhu,
Have you done the Intial load for the object "CUSTOMER_MAIN". Once the download of this object is done, Delta load for business partners to flow from R/3 to CRM and vice-versa will be activated automatically.
Please check the transaction R3AC4, where you should identify the Object calss entry as BUPA and RFC destination as your R/3 system. If not please make that entry, then delta will happen automatically
As vikas suggested, please make sure the PIDE settings, where you should assign R/3 prospect account group to CRM classification "C" and Number grouping.
And also check the BDOCS in Transaction SMW01.
Rewards points if it helps
Murali

Automatic creation of customer from BP - How to match the fields? CVI

I am trying to create a customer from a BP. I am done all the customizing steps.
Now I need to match the fields.
There is an error message with this field KNA1-SPRAS that doenst match
what should I do?
I have read this "In particular you have matched the required entry fields. You have to set all fields that are required entry fields in the customer/vendor account as required entry fields in the field selection control for your customer/vendor business partner roles."
Where do I set these fields and how do I know which fields to set?
Thank you for your help.

Hi,
I am trying to create a customer. I am done all the customizing steps.
Which steps do you follow to create? Please give me the details. Thanks.
After customizing, I created the business partner using the BP transaction. In the syncronizationcockit I still have errors messages when I select BP->Customer and then give the BP number. How should I do this correctly. Please if possible a screenshot will be good.
I have an error message that a field information is missing. I filled the field but still have the same error.
Thanks.

Create A Customer

Hi,
I want to create a customer from a powerbuilder program. And I want to know which BAPI should I call?
I need to create with assigned customer ID and all required fields for a customer from scrap.
Thanks,
Vicki

maximum information you can create using BAPI_CUSTOMER_CREATEFROMDATA1,but what is the data you are missing,
check these BAPI's..
/SAPNEA/SMAPI_CUSTOMER_CREATE2
/SAPNEA/SMAPI_CUSTOMER_CREATE
those are also BAPI's.
you can have a try with them..
Reward Points if it is useful
Thanks
Seshu

R/3 BP role ship to party from prospective customer not updating in to CRM

Hi,
When we change Business partner role to ship-to-party from prospective customer in R/3 not updating in to SAP CRM .
Please suggest the solution for this.
Thanks,
Naveen Kumar.

Dear Rekha,
I have verified but No issues in PIDE, looks everything is fine.
Account Groups 0001 to 0005 were asssigned to Classification B.
But initially when I started replicating customers all the roles were created as Sold-to-Party in CRM irrespective of their role in R/3. We have applied Note: 914437. Since then the issue got resolved.
Pls suggest me in this regard.
Srujan

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

A method to create completely customized photo book page templates from scratch in Lightroom 5

I was able to successfully create completely customized Lightroom 5 page templates (including altering the number of, positions, and sizes of pictures) by making edits to the templatePages.lua file(s) in the Lightroom directory tree. I have never heard of the LUA file format before, but it is ASCII and looks somewhat like XML, so it was fairly easy to decipher. Here is a high-level description of how I did it. This applies to Lightroom 5 on Windows 7. If this doesn't make any sense to you, then don't try it - you're likely in over your head. Although my description is brief and lacking in detail, it should enable someone who is capable of handling this to figure it out with a little of careful trial and error. Do this at your own risk - if you screw-up your installation, catalog, or computer, it's your own fault. It all worked great for me.
First, open the "<lightroom 5 install directory>\Templates\Layout Templates" folder. Then navigate to the template set that contains the template you would like to use as a starting point for the new template. For example, "12x12-blurb\clean12x12". Make a back-up copy of the templatePages.lua file in case you mess something up and want to revert.
There will be a bunch of .jpg files in this directory that each contain a preview image of the layout that carries the same name as the .jpg file. Find the one that you would like to use as a starting point. Take note of the name of the file, which is probably something similar to "page_26_preview.jpg". Duplicate the file and rename it to something unique, such as "dummy_preview.jpg". It's just temporary, so it doesn't matter what name you pick, provided it is a legal file name with no spaces.
Next, open the templatePages.lua file in a text editor. I suggest using one that can automatically recognize and format ULA (such as Notepad++, which is open source and free to use). Then search the file for the unique portion of the file name you took note of earlier, such as "page_26". It will point you to a section in the LUA file that describes that particular template. Carefully copy that entire section, including a balanced number of brackets (starting with the two brackets and commas before "children" and ending with the one bracket and comma after the "title" line. Paste the copied text into the end of the file on a new line immediately following the bracket and comma after the "title" field for the last page template section (right near the end of the file). Change the "previewName" field to the name of the preview file copy that you created ("dummy_preview.jpg" for me) and the "name" field to the name of the new template you're creating ("dummy" for me, since it is just temporary). Next change at least one of the hex characters in the "pageID" field such that the new template will have a unique page identifier.
Now you can make edits to the photo and text fields included in the new section, using other templates in the template file as examples. "x" and "y" fields are coordinates (in pixels) for the bottom-left corner of the picture or text field, "height" and "width" are the width of the field in pixels. The fields should be mostly self-explanatory, but make sure that the "photoindex" fields are filled-in starting from 1 to N, where N is the number of pictures in the template, with no duplicates or gaps. They do not need to be in order. Treat the "textIndex" fields similarly for text fields. If you want to add an additional picture or text field, simply copy the section describing a picture or text field from another template and paste it, carefully, into the new template that you are creating.
Once you are done, save the file (you may get interference from Windows UAC, in which case save the file elsewhere and the move it back to the correct directory). Then open Lightroom. Create a new photobook, and choose the new template for one of the pages, remembering that the preview image will look like the JPG that you copied. Voila! If you didn't screw anything up, you should see a page based on your new template. Then right-click the page and select "Save as custom page", which will cause a fresh preview file to be created for your new template and your template to be copied to the "custom pages" section of the template menu. The new section you added to the "templatePages.lua" and the "dummy" preview file can now be deleted, since they are no longer needed. I save them so that I may simply overwrite them the next time I need to create a customized template.
Enjoy, and please share any clarifications, corrections, or enhancements to my process.

peter at knowhowpro wrote:
DHWachs wrote:
This post was great! Thank you so much. But I am hoping you know one more thing related to this. In the "transform" section of the definition (where the x/y coordinates are set along with height and width) there is an option called "angle". I was hoping that changing this value would allow me to offset the angle of the picture. However, if I put any value there other than 0 the template becomes unusable.
Do you happen to know what this option does?
I haven't looked into the files, so this is just a guess based on how some graphic applications work. It's common to think of rotating a shape as pivoting around a center point, but It's possible that the file sets a value for the rotation point not at the center. In some graphics applications, you can set a shape's pivot at any corner or in the middle of any side, of the rectangle that contains the whole shape.
So, your value may be rotating the shape around a pivot that moves the shape into some area that upsets the behavior of other shapes. Just a thought.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Peter's point is a good one. I would also assume that the "angle" property allows you to rotate an image, but I haven't tried it myself. One thing to investigate - are there any page templates included in LR that have image placeholders that are at an angle (I don't recall any, off-hand)? If so, looking at the associated .lua file could provide insight into how an angled image placeholder should be described.

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

Can I create a custom XMP panel but using the exact same fields from standard XMP panels?

Hi,
I am new to XMP and not very technical, so please excuse me if this sounds like a stupid question!
I have managed to create my own custom panels for Photoshop using the Generic Panel method with my own custom fields and they work fine. However what I need to do now is create a custom panel that uses the exact same fields from some of the standard panels. The reason being is that I have 4 fields that need to be integrated into another non-adobe system (Extensis Portfolio) that recognizes standard XMP fields, but at present these 4 fields are spread across different standard panels and it would be much easier for the user in Photoshop if they were all together on one panel.
An example field is the "Additional Model Info" field that currently resides on the standard IPTC Extension panel. If I fill in a value in this field on a JPEG then open the the image in Extensis Portfolio, then the field is also filled in in a field called IPTC - Model Info, displaying a key of Iptc4xmpExt:AddlModelInfo.
Is there a way I can take this standard field and use it on a custom panel, so that it can still be filled in in Photoshop and the value viewed in Extensis Portfolio? Sure I can create a custom panel and create a field called "Additional Model Info" but I can't figure out how to connect it to the corresponding field in Portfolio. I tried changing the xmp_property name="Iptc4xmpExt:AddlModelInfo" but this just broke the panel.
Is what I am trying to do possible and if so how and can it be done using the Generic Panel method?
Many thanks!

I am trying to do the same thing but with only the IPTC Keywords field. Searching everywhere but no luck.
Thanks!

Error on creating a subsite from custom template with full control

I have a site collection and a subsites A and B on it, there is a group 'Managers' that has Read permissions on
site A. This group has Full control permissions on site B, and I have a solution with custom site definition, lists and feature event receiver that breaks permissions for certain list and sets Read permissions for group 'Visitors'. This list
is being created when site was created by my custom site definition. But when I try to create a site from this template I get 'Access denied'. I checked logs, and they say that site was created, every method in my receiver is executed without errors
but later I see messages about deleting this site. But if I am a
site collection admin everything works. And another fact is that if I create site without activating feature with event receiver and after creating site I
manually activate the feature everything works fine. Any ideas?

Hi,
For a better troubleshooting, I suggest to do as follows:
1. Rescope your features so that web application related activity are performed by a web application scoped feature.
2. Disable the security setting via PowerShell or a console app.
function Set-RemoteAdministratorAccessDenied-False()
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint") > $null
[System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SharePoint.Administration") > $null
# get content web service
$contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
# turn off remote administration security
$contentService.RemoteAdministratorAccessDenied = $false
$contentService.Update()
Set-RemoteAdministratorAccessDenied-False
Best regards
Dennis Guo
TechNet Community Support

Issue in creating a custom data model from BP

Hi Team
We have a requirement to create a custom data model by copying data model BP. I have successfully created new data model ZP . I have copied the UI for searching from BP. Issue is when i search a business partner ideally it should not display any entries because i have just created the data model, But it is taking entries from BP and getting displayed. Please let me know how to map data model to search UI. I dont see option USMD_MODEL here

Hi Imran,
actually that is not an issue but a designed feature. I'm afraid that you need to re-think your whole project. The explanations is rather simple:
Data model BP in MDG is a so called Re-Use Area data modell. This means that active data (records that are currently not stored in a change request) are saved in existing SAP ERP data base tables like BUT000 for the business partner master data and LFA1 or KNA1 for Vendor or Customer master data.
If you copy data model BP to ZP you still refer to the same active area. You will always find the same active objects - no matter which data model you are actually using for the user interface. The only difference wil occur for objects being currently processed in a change request. In that case a separation between BP and ZP is possible. But this won't help to solve your issue.
From SAP side I can only recommend not to copy BP but to find a different way of integrating your project needs into BP.
Best regards
Michael

Creating Customer from employee who is hired in HR

Hi
Please tell me if there is some way to create customer records from employee record created in HR
Is there any report or transaction available that will create a customer record by using/copying the HR employee record without entering data again.
regards
Pravin

Hi Pravin,
let me correct you.
As the employee codeand you can maintain sales related data T-Code
PA30
and through info type 900 sales org.,sales office,sales group.
You can use sales employee code as a partner means who has taken order or during return who is responsible for return delivery.
You can create emloyee no. as vendor (FI & CO intgrtaion) e.g. for salary,travel advence,etc.
Hope this will help you the role of employee id and integrtaion.
Best Regards
Sainath

Is there a way to create a SD Customer from Employee information?

Hi!
Is there a way to create a SD Customer from Employee information?
We have implemented HR, I know that we can transfer the employee information to ECC using the transaction PFAL, also we know that the transaction PRAA is used to create vendors from employee information.
Is there a similar transaction to create a sold to party from employee information?
Thanks!

Hi Christian,
Please have a look at the F1 help for the origin field:
"If the field is empty when creating a sales document (standard setting)
the partner functions are determined from those partner functions given
in the sold-to party customer master (Table KNVP). If the system can not
determine all functions, it enters the number of the sold-to party (SP)
for the remaining partner functions of partner type customer (KU).
Maintain this field if you want a specific partner to be determined that
is not in the partner screen of the sold-to party master.
Use the following entries:
A - if a credit management partner function (e.g. CM) should be taken
   directly from the credit representative table (T024P). The credit
   representative must not then be created in the customer master.
-   For determining partners of partner type personnel
B - if functions should be taken from a customer hierarchy (Standard
   setting for customer hierarchy partners)
C - if you want to take the partner function exclusively from the
   partner screen entries in the customer master. If no partner is
   specified in the customer master for this function, it will not be
   used in the document. In this case you may have to extend the
   mandatory partner functions in the document manually.
    As this setting can lead to incomplete documents, the functions SP,
    BP, PY and SH, which are not absolutely necessary for sales and
    distribution processing, are not used.
-   Determining partners of partner type customer
D - if the personnel number of the system user should be used as the
   function, e.g. for sales executives. This function is only carried
   out online, not in the background. Therefore you should not carry out
   this setting for mandatory partner functions.
-   Determining partners of partner type Personnel
E - if the partner function should be replaced with a contact person
   from the contact person screen for the corresponding partner (table
   KNVK). If another contact person has been specified on the partner
   screen than the one on the contact person screen, this is not copied
   into the document.
-   For determining partners of partner type contact person
F - if it should be possible to determine the contact partners not only
   from the contact person screen but also from the partner screen of
   the partner with the current source partner function.
-   Determining partners of partner type contact person"
Also, please have a look in note 752091 where explain the partner rule.
Regards
Ruy Castro

Create Business Partner from foreing customer

Hi all.
I have a problem. When I create a customer by transaction XD01, if customer is Spanish (I'm in Spain),
business partner is created automatically, I see this is right in transaction BP. But if I create a foreing customer, business partner isn't created, I mean, in transaction BP, the new customer doesn't exist.
Could you help me?
Thanks a lot.
Marta.

I am not sure, whether the issue is in R/3 or in CRM. If the issue is there when you try to create an overseas customer via XD01, then you need to check the partner determination procedure configuration. If the issue is there when you execute BP, then you need to check in CRM. By the way, what is the message system was popping up and in which transaction code.
G. Lakshmipathi

Create prospect customer from UI

Similar Messages

Maybe you are looking for