Create screen when creating OOP ALV
hi everybody
I have created an OOP ALV but I dont know how to attach it to a screen, i know its tcode se51, but i dnt know how to link it to the ALV
can anybody help me?
Hello,
I think first you have to check some standard sap program :
BCALV_EDIT_01 Switch on and off the ready-for-input status of the entire grid
BCALV_EDIT_02 Define ready-for-input status at cell level
BCALV_EDIT_03 Verification of modified cells
BCALV_EDIT_04 Delete and append rows
BCALV_EDIT_05 Checkboxes
BCALV_EDIT_06 Dropdown Listbox at Column Level
BCALV_EDIT_07 Dropdown Listbox at Cell Level
BCALV_EDIT_08 Integrate Non-Standard F4 Help
there simple process like you have to add a container on a screen
and in report program
create an instance
data g_container TYPE scrfname VALUE 'ZGW_CONTAINER',
grid1 TYPE REF TO cl_gui_alv_grid.
where zgw_container is conatiner name which is asing to screen
then call the method set_table_for_first_display of class cl_gui_alv_grid .
pass the require parameter to that method.
CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME = 'ZGW3RE007'
IS_VARIANT = GS_VARIANT
I_SAVE = 'A'
* I_DEFAULT = 'X'
IS_LAYOUT = GS_LAYOUT
* IS_PRINT =
* IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING = lt_exclude
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
* IR_SALV_ADAPTER =
CHANGING
IT_OUTTAB = GT_OUTTAB[]
IT_FIELDCATALOG = WA1_FIELDCATALOG
* IT_SORT =
* IT_FILTER =
* EXCEPTIONS
* INVALID_PARAMETER_COMBINATION = 1
* PROGRAM_ERROR = 2
* TOO_MANY_LINES = 3
* others = 4
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
or read this pdf document.
http://www.sap-partner.hu/ABAP_HELP_INFO/An%20Easy%20Reference%20for%20ALV%20Grid%20Control.pdf
Thanks
Anirudh Saini
Similar Messages
-
Blank screen when Back on ALV report
Hello All,
I have written an ALV report and when I click BACK on the output list, instead of taking me back to selection screen it is giving a blank screen, and again clicking BACK is giving me selection screen.
ALV output -->> BACK --> Blank screen --> BACK --> Selection screen
I am unable to trace out why this is happenning. I want behavour as it dies for other alv report.
ALV output --> BACK --> Selection Screen.
Any suggestions are highly appreciated.
Thanks-I am using a FM, its a straight forward ALV report,
Getting data from different tables in to final output internal table, calling a function module to display ALV.
h_repid = sy-repid.
h_variant-report = h_repid.
t_slis_layout_alv-zebra = 'X'.
t_slis_layout_alv-colwidth_optimize = 'X'.
PERFORM get_fieldcat_summary.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = h_repid
is_layout = t_slis_layout_alv
it_fieldcat = t_fieldcat1[]
i_save = 'A'
is_variant = h_variant
TABLES
t_outtab = it_main[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks- -
Create Edit Delete in Oops ALV
Hi Experts,
I need to create an ALV which will provide all the functionality of Create, Edit, Save and Delete records and update the Custom table accordingly.
I want to design it as follows -
1. Display should be in non-ediatble mode initially (because I don't want to make it completely ediatble at all times)
2. When the user clicks Create button a new line appends at the bottom and the ALV has to be made editable, for the values to be entered at the new row appended.
3. When the user presses Save, again the ALV goes into non-ediatble mode.
4. When the user presses Edit Button, the ALV is open for editing and again the whole ALV is editable. After Editing, the user will select those particular lines through Box Button and Press on Save Button to enable those particular lines to be modified and saved in ALV. Again at the press of Save button, the ALV will switch to Non-modifiable view.
5. For Deletion, select the particular line/lines through Box Button and Click on Delete.
This is how I plan to achieve the Create, Edit, Delete Functionality.
Can you please confirm the feasibilty of this Design, whether it is achievable.
There is some option of dynamically changing the Field Catalogue. If it is there, I'm thinking of utilising it for switching the modes on click of Create, Edit and Save Buttons. Click/Edit --> Modifiable. Save --> Non-modifiable.
Please do give your comments on the above functionality and feasibility. If you are knowing a different or easy approach please do share it. If you have done it then please do share it.
Thanks & Regards
TanuPlz ask your specific requirement otherwise mosarator will block the thread...
-
I'm trying to set up a signature on my email account. The signature appears on the screen when I'm creating an email, but does'nt appear on the email to the person I've sent it to. All it shows is an empty box... Please help! xoxo
I did use that functionality. I am looking at this thread now on my iPhone and I see the images just fine!
-
How to get the alv grid report in another screen when double click on basic
Hi.
I have created an alv report using class cl_gui_alv_grid.I got another report in the same screen,when double clicked on basic list(using double_click event).I want to get this report in another screen.What i have to do?(In classical reports i worked with sy-lsind = 1 ,but how to do here?)
How to set color to the selected rows in the alv grid report?I worked with change_data_from_inside method of cl_gui_alv_grid.But it didn't work out..
With Regards,
Ramana.On double click event . you will have to call another screen say 9000.
now within screen 900 PBO.. you will have to prepare the fieldcatalog/layout.. and the table to be displayed there.
in PAI of screen 9000, you can return to the original ALV.
method double_click.
call screen 9000.
endmethod.
" now in PBO create a module display_alv2
module display_alv2.
'prepare the fieldcat/layout info for new alv
'add the data to the new ALV table
'instantiate the grid call.. etc
'call the ALV
endmodule
"in PAI
module exit.
case sy-ucomm.
when 'ENT1'.
leave to screen 0.
endcase.
endmodule
while preparing the field catalog you can mention the EMPHASIZE field, whish will give color to tht column
E.g
*--Service Order
ls_fieldcat-tabname = 'IT_FINAL_VALID'.
ls_fieldcat-fieldname = 'AUFNR'.
ls_fieldcat-scrtext_m = 'Service Order'.
ls_fieldcat-ref_table = 'AUFK'.
ls_fieldcat-ref_field = 'AUFNR'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-outputlen = 12.
ls_fieldcat-emphasize = 'C400'. "This will add color to the cell
APPEND ls_fieldcat TO fcat_valid.
Hope this helps. -
I want to create dynamic ALV report
Hi great abapers,
I want to create dynamic ALV report.Please help me.
Regards,
BillaHi,
Please check the code below:
REPORT YMMR_PALLET_OVERVIEW MESSAGE-ID Y_MESSAGE_0001.
Short description:
To Display and sum up the Quantity of scanned materials on pallet for*
each Shipment number for the Packaging Materials. *
TYPE-POOLS : SLIS.
TABLES: YYLE0003. " Scanned SSCC No.
--Structure Declaration--
Structure for Shipment No. and Date.
TYPES : BEGIN OF T_VTTK_TAB ,
TKNUM LIKE VTTK-TKNUM, " Shipment number
ERDAT LIKE VTTK-ERDAT, " created Date
END OF T_VTTK_TAB .
Structure for Shipment No., Packaging Materials and Date.
TYPES: BEGIN OF T_ITAB2,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P,
ERDAT LIKE YYLE0003-ERDAT, " created Date
COUNT TYPE I,
END OF T_ITAB2.
Structure for Shipment No. and Packaging Materials.
TYPES: BEGIN OF T_ITAB3,
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF T_ITAB3.
--Internal table Declaration--
*Internal tables for the above Declared structures
DATA: G_VTTK_TAB TYPE TABLE OF T_VTTK_TAB,
G_ITAB5_TAB TYPE TABLE OF T_ITAB2,
G_ITAB4_TAB TYPE TABLE OF T_ITAB3,
G_ITAB3_TAB TYPE TABLE OF T_ITAB2. "#EC NEEDED
*Internal table Holding Shipment No.and quantity
DATA: BEGIN OF G_TOTAL_TAB OCCURS 0 ,
TKNUM TYPE YYLE0003-TKNUM, " Shipment number
QUANTITY TYPE P,
COUNT TYPE I,
END OF G_TOTAL_TAB .
*Internal table for selection screen data
DATA: BEGIN OF G_SCANDATA_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF G_SCANDATA_TAB.
DATA: BEGIN OF ST_SCANDATA_TAB,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
EXIDV TYPE EXIDV, " External Handling Unit
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
END OF ST_SCANDATA_TAB.
DATA: BEGIN OF G_SCANDATA_COUNT_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
TKNUM LIKE YYLE0003-TKNUM, " Shipment number
QUANTITY LIKE YYLE0003-QUANTITY, " Quantity
COUNT TYPE I,
END OF G_SCANDATA_COUNT_TAB.
DATA: L_COUNT TYPE I.
*Internal table for Packaging Materials and quantity
DATA: BEGIN OF G_ITAB6_TAB OCCURS 0,
VHILM LIKE YYLE0003-VHILM, " Packaging Materials
QUANTITY TYPE P, " Quantity
END OF G_ITAB6_TAB.
*- Field catalog
DATA: L_ALV_CAT1_TAB TYPE TABLE OF LVC_S_FCAT.
--Work area Declaration--
DATA: WA_VTTK TYPE T_VTTK_TAB,
WA_ITAB3 TYPE T_ITAB2,
WA_ITAB5 TYPE T_ITAB2,
WA_ITAB4 TYPE T_ITAB3,
WA_ITAB1 LIKE G_SCANDATA_TAB,
WA_ALV_CAT1 LIKE LINE OF L_ALV_CAT1_TAB.
----Variable Defnition -
DATA: G_CUSTOM_CONTAINER_0100 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
G_ALV_GRID_0100 TYPE REF TO CL_GUI_ALV_GRID,
G_CONTAINER_0100 TYPE SCRFNAME VALUE 'LIST',
G_MYLAYOUT TYPE LVC_S_LAYO, "#EC NEEDED
G_WA TYPE REF TO DATA.
DATA: G_VAR TYPE I, " No of records
G_VAR1 TYPE CHAR20. " Variable
--field symbols Declaration--
FIELD-SYMBOLS : <F_FS> TYPE TABLE,
<F_FS3> TYPE ANY,
<F_FS4> TYPE ANY,
<F_FS5> TYPE ANY,
<F_WA> TYPE ANY,
<F_FS15> TYPE ANY,
<F_FS16> TYPE SY-DATUM,
<F_FS2> TYPE T_ITAB2,
<F_FS6> TYPE ANY,
<F_FS7> TYPE ANY,
<F_FS12> TYPE ANY,
<F_FS13> TYPE ANY.
--Selection Parameters--
SELECTION-SCREEN: BEGIN OF BLOCK BLCK01 WITH FRAME TITLE TEXT-000.
"Select options
SELECT-OPTIONS :
S_TKNUM FOR YYLE0003-TKNUM , " Shipment number
S_YYREF FOR YYLE0003-YY_REFERENCE, " Packing reference
S_YYREFT FOR YYLE0003-YY_REFTP, " Reference type
S_EXIDV FOR YYLE0003-EXIDV, " External HU
S_MATNR FOR YYLE0003-MATNR, " Material number
S_VBELN FOR YYLE0003-VBELN, " SD number
S_POSNR FOR YYLE0003-POSNR, " Item number
S_LGTOR FOR YYLE0003-LGTOR, " Door for Wr Hs No
S_VHILM FOR YYLE0003-VHILM, " Packaging Mat
S_YYMEIN FOR YYLE0003-YY_MEINH, " Indicator for UOM
S_QUANTI FOR YYLE0003-QUANTITY, " Quantity
S_YCHECK FOR YYLE0003-YYCHECKED, " Destination_door
S_STATUS FOR YYLE0003-STATUS, " Packing status
S_STASHI FOR YYLE0003-STATUSSHIPTO, " Status on ship-to
S_LOADTR FOR YYLE0003-LOADTRUCK, " Load truck
S_ERDAT FOR YYLE0003-ERDAT , " Date
S_ERZET FOR YYLE0003-ERZET, " Entry time
S_AEDAT FOR YYLE0003-AEDAT, " Last changed on
S_ERNAM FOR YYLE0003-ERNAM, " Name of Person
S_AEZET FOR YYLE0003-AEZET, " Time last change
S_AENAM FOR YYLE0003-AENAM. " Name of person
SELECTION-SCREEN: END OF BLOCK BLCK01.
--INITIALIZATION--
INITIALIZATION.
Clear the variables and workarea
CLEAR :G_VAR,
G_VAR1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1,
WA_VTTK,
WA_ITAB3,
WA_ITAB5,
WA_ITAB4,
WA_ITAB1.
--AT SELECTION-SCREEN--
AT SELECTION-SCREEN.
To validate the data entered in selection screen
PERFORM SUB_VALIDATE.
--START-OF-SELECTION--
START-OF-SELECTION.
*To fetch the data from table yyle0003
PERFORM GET_INPUT_DATA.
*To create the Dynamic Field Catalog
PERFORM GET_FIELDCAT.
To populate the data to final table
PERFORM GET_FINAL_DATA.
MODULE status_0100 OUTPUT *
MODULE STATUS_0100 OUTPUT.
*set title bar and PF status.
SET PF-STATUS 'ZVKS'.
SET TITLEBAR 'ZVKS'.
CHECK SY-UCOMM IS INITIAL.
SORT G_SCANDATA_TAB BY TKNUM VHILM.
*Create object for Custom container
CREATE OBJECT G_CUSTOM_CONTAINER_0100
EXPORTING
CONTAINER_NAME = G_CONTAINER_0100
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5.
*Create object for ALV grid
CREATE OBJECT G_ALV_GRID_0100
EXPORTING I_PARENT = G_CUSTOM_CONTAINER_0100.
G_MYLAYOUT-GRID_TITLE = 'Display Scanning data'.
*Call method for table Display
CALL METHOD G_ALV_GRID_0100->SET_TABLE_FOR_FIRST_DISPLAY
CHANGING
IT_OUTTAB = <F_FS>
IT_FIELDCATALOG = L_ALV_CAT1_TAB
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
User Interaction
MODULE USER_COMMAND_0100 INPUT.
CALL METHOD CL_GUI_CFW=>DISPATCH.
*To exit , back or cancel
CASE SY-UCOMM.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
LEAVE PROGRAM.
WHEN OTHERS.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form get_input_data
This sub routine will get the data from yyle0003 table.
FORM GET_INPUT_DATA.
CONSTANTS: C_DOT TYPE C VALUE '.',
C_CHAR TYPE C VALUE 'D'.
CLEAR G_SCANDATA_TAB.
Get the data from yyle0003
SELECT VHILM " Packaging Materials
EXIDV " External Handling Unit
TKNUM " Shipment number
QUANTITY " Quantity
FROM YYLE0003
INTO TABLE G_SCANDATA_TAB
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
If VHILM contains any Decimal '.', replace it with D
LOOP AT G_SCANDATA_TAB.
REPLACE C_DOT WITH C_CHAR INTO G_SCANDATA_TAB-VHILM.
IF SY-SUBRC = 0.
MODIFY G_SCANDATA_TAB TRANSPORTING VHILM.
ENDIF.
CLEAR G_SCANDATA_TAB.
ENDLOOP.
*To get the Shipment No Creation date from VTTK.
SELECT TKNUM
ERDAT
FROM VTTK
INTO TABLE G_VTTK_TAB
WHERE TKNUM IN S_TKNUM.
SORT G_SCANDATA_TAB BY VHILM EXIDV. "TKNUM VHILM.
*To get the repeatition of Pacakaging material for each Shipment.
*--- to find the count of packaging materials under each shipment
LOOP AT G_SCANDATA_TAB.
READ TABLE G_SCANDATA_TAB INTO ST_SCANDATA_TAB INDEX SY-TABIX.
AT END OF EXIDV.
L_COUNT = L_COUNT + 1.
MOVE-CORRESPONDING ST_SCANDATA_TAB TO G_SCANDATA_COUNT_TAB.
G_SCANDATA_COUNT_TAB-COUNT = L_COUNT.
CLEAR: ST_SCANDATA_TAB, L_COUNT.
COLLECT G_SCANDATA_COUNT_TAB.
ENDAT.
CLEAR : G_SCANDATA_TAB.
ENDLOOP.
ENDFORM. " get_input_data
*& Form sub_validate
*This subroutine will validate the data eneterd in the selection screen
FORM SUB_VALIDATE.
*Varaiable declaration for Shipment number
DATA: L_TKNUM TYPE YYLE0003-TKNUM."#EC NEEDED " Shipment number
*- Condition will not qualify all primary key (IDENT)
SELECT TKNUM FROM YYLE0003 UP TO 1 ROWS
INTO L_TKNUM "wa_scandata
WHERE TKNUM IN S_TKNUM " Shipment number
AND YY_REFERENCE IN S_YYREF " Packing reference
AND YY_REFTP IN S_YYREFT " Reference type
AND EXIDV IN S_EXIDV " External Handling Unit
AND MATNR IN S_MATNR " Material number
AND VBELN IN S_VBELN " SD number
AND POSNR IN S_POSNR " Item number
AND LGTOR IN S_LGTOR " Door for warehouse No
AND VHILM IN S_VHILM " Packaging Materials
AND YY_MEINH IN S_YYMEIN " Indicator for UOM
AND QUANTITY IN S_QUANTI " Quantity
AND YYCHECKED IN S_YCHECK " Destination_door
AND STATUS IN S_STATUS " Packing status
AND STATUSSHIPTO IN S_STASHI " Status on ship-to
AND LOADTRUCK IN S_LOADTR " Load truck
AND ERDAT IN S_ERDAT " Date
AND ERZET IN S_ERZET " Entry time
AND AEDAT IN S_AEDAT " Last changed on
AND ERNAM IN S_ERNAM " Name of Person
AND AEZET IN S_AEZET " Time last change
AND AENAM IN S_AENAM. " Name of person
ENDSELECT.
IF SY-SUBRC <> 0.
MESSAGE E987 . " No data found for these selection criterias
ENDIF.
ENDFORM. " sub_validate
*& Form get_fieldcat
Preparing Field catalog
FORM GET_FIELDCAT.
DATA: L_REF TYPE REF TO DATA,
L_I TYPE I. " Variable
CONSTANTS: C_CENTER TYPE C VALUE 'C'. " Center Justified
LOOP AT G_SCANDATA_TAB INTO WA_ITAB1.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB3.
APPEND WA_ITAB3 TO G_ITAB3_TAB.
MOVE-CORRESPONDING WA_ITAB1 TO WA_ITAB4.
COLLECT WA_ITAB4 INTO G_ITAB4_TAB.
*To sum up the qunatity field for each TKNUM.
AT END OF TKNUM.
SUM.
MOVE WA_ITAB1-TKNUM TO G_TOTAL_TAB-TKNUM.
MOVE WA_ITAB1-QUANTITY TO G_TOTAL_TAB-QUANTITY .
APPEND G_TOTAL_TAB.
CLEAR G_TOTAL_TAB.
ENDAT.
CLEAR : WA_ITAB1,
WA_ITAB3,
WA_ITAB4.
ENDLOOP.
*--- Begin of change - SKR.EXT - EBDK986377
SORT G_ITAB4_TAB BY TKNUM.
*--- End of change - SKR.EXT - EBDK986377
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
MOVE-CORRESPONDING WA_ITAB4 TO WA_ITAB5.
MOVE-CORRESPONDING WA_ITAB4 TO G_ITAB6_TAB.
*---- to get the count
READ TABLE G_SCANDATA_COUNT_TAB WITH KEY TKNUM = WA_ITAB5-TKNUM
VHILM = WA_ITAB5-VHILM.
IF SY-SUBRC EQ 0.
WA_ITAB5-COUNT = G_SCANDATA_COUNT_TAB-COUNT.
ENDIF.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
COLLECT G_ITAB6_TAB.
ENDLOOP.
CLEAR : WA_ITAB3.
SORT G_ITAB4_TAB BY TKNUM VHILM.
DELETE ADJACENT DUPLICATES FROM G_ITAB4_TAB COMPARING VHILM.
*To get the Number of fields to be displayed
DESCRIBE TABLE G_ITAB4_TAB LINES G_VAR.
L_I = '3'.
*Field catalog
WA_ALV_CAT1-FIELDNAME = 'TKNUM'(002).
WA_ALV_CAT1-COL_POS = 1.
WA_ALV_CAT1-COLTEXT ='ShipmentNo.'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
WA_ALV_CAT1-FIELDNAME = 'ERDAT'(003).
WA_ALV_CAT1-COL_POS = 2.
WA_ALV_CAT1-COLTEXT ='Creation_Date.'(005).
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR : WA_ALV_CAT1.
Create field catalog for each of VHILM
LOOP AT G_ITAB4_TAB INTO WA_ITAB4.
IF G_VAR >= 1.
CONDENSE WA_ITAB4-VHILM NO-GAPS.
WA_ALV_CAT1-FIELDNAME = WA_ITAB4-VHILM. "l_fieldname.
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = WA_ITAB4-VHILM.
WA_ALV_CAT1-JUST = C_CENTER. "'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
L_I = L_I + 1.
ENDIF.
*TOTAL-last column in the field catalog
AT LAST.
WA_ALV_CAT1-FIELDNAME = 'TOTAL'(004).
WA_ALV_CAT1-COL_POS = L_I.
WA_ALV_CAT1-COLTEXT = 'TOTAL'(004).
WA_ALV_CAT1-JUST = C_CENTER. " 'C'.
APPEND WA_ALV_CAT1 TO L_ALV_CAT1_TAB.
CLEAR WA_ALV_CAT1.
ENDAT.
SORT L_ALV_CAT1_TAB BY FIELDNAME.
*Non of the field name should not get repeated
DELETE ADJACENT DUPLICATES FROM L_ALV_CAT1_TAB.
ENDLOOP.
SORT L_ALV_CAT1_TAB BY COL_POS.
*Creating Dynamic Internal table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = L_ALV_CAT1_TAB
IMPORTING
EP_TABLE = L_REF.
Assigning the Dynamic field Catalog to field symbol.
ASSIGN L_REF->* TO <F_FS>.
CREATE DATA G_WA LIKE LINE OF <F_FS>.
ASSIGN G_WA->* TO <F_WA>.
DELETE ADJACENT DUPLICATES FROM <F_FS> COMPARING ALL FIELDS.
ENDFORM. " get_fieldcat
*& Form display_data
FORM GET_FINAL_DATA.
*variable declaration
DATA: L_TOTAL TYPE I, " Row wise total
L_FILL TYPE I, " Count
L_TOT TYPE I. " Grand total
*To get the TOTAL qunatity in the last line of out put.
LOOP AT G_ITAB6_TAB.
CLEAR WA_ITAB5.
WA_ITAB5-TKNUM = 'TOTAL'(004).
WA_ITAB5-ERDAT = SPACE.
MOVE-CORRESPONDING G_ITAB6_TAB TO WA_ITAB5 .
LOOP AT G_SCANDATA_COUNT_TAB WHERE VHILM = G_ITAB6_TAB-VHILM.
WA_ITAB5-COUNT = WA_ITAB5-COUNT + G_SCANDATA_COUNT_TAB-COUNT.
ENDLOOP.
APPEND WA_ITAB5 TO G_ITAB5_TAB.
CLEAR WA_ITAB5.
ENDLOOP.
DESCRIBE TABLE G_ITAB5_TAB LINES L_TOT.
*>>>>>>>>
****To get total qunatity of all TKNUM
LOOP AT G_TOTAL_TAB .
L_TOTAL = L_TOTAL + G_TOTAL_TAB-QUANTITY.
ENDLOOP.
*>>>>>>>>
*To assign ERDAT to g_itab5_tab
LOOP AT G_ITAB5_TAB INTO WA_ITAB5 .
READ TABLE G_VTTK_TAB INTO WA_VTTK WITH KEY TKNUM = WA_ITAB5-TKNUM.
IF SY-SUBRC = 0.
WA_ITAB5-ERDAT = WA_VTTK-ERDAT.
MODIFY G_ITAB5_TAB FROM WA_ITAB5 TRANSPORTING ERDAT.
ENDIF.
ENDLOOP.
*Assigning value in each field to respective Field symbols.
LOOP AT G_ITAB5_TAB ASSIGNING <F_FS2>.
CLEAR G_TOTAL_TAB-QUANTITY.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_FS2> TO <F_FS6>.
ASSIGN COMPONENT 'TKNUM' OF STRUCTURE <F_WA> TO <F_FS7>.
<F_FS7> = <F_FS6>.
CONDENSE <F_FS2>-VHILM NO-GAPS.
ASSIGN COMPONENT 'VHILM' OF STRUCTURE <F_FS2> TO <F_FS3>.
ASSIGN COMPONENT 5 OF STRUCTURE <F_FS2> TO <F_FS4>.
MOVE <F_FS3> TO G_VAR1.
ASSIGN COMPONENT G_VAR1 OF STRUCTURE <F_WA> TO <F_FS5>.
<F_FS5> = <F_FS4>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_FS2> TO <F_FS16>.
ASSIGN COMPONENT 'ERDAT' OF STRUCTURE <F_WA> TO <F_FS15>.
WRITE <F_FS16> TO <F_FS15> .
Inorder not to display the date '00/00/000',
if there is no DATE .
IF ( <F_FS15> CP '00/*' )
OR ( <F_FS15> CP '00.*' )
OR ( <F_FS15> CP '00-*' ).
<F_FS15> = SPACE.
ELSEIF ( <F_FS15> CO ' / /' )
OR ( <F_FS15> CO ' . .' )
OR ( <F_FS15> CO ' - -' ) .
<F_FS15> = SPACE.
ENDIF.
READ TABLE G_TOTAL_TAB WITH KEY TKNUM = <F_FS6>.
IF SY-SUBRC = 0.
ASSIGN G_TOTAL_TAB-QUANTITY TO <F_FS12>.
ASSIGN COMPONENT 'COUNT' OF STRUCTURE <F_FS2> TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS13> + <F_FS12>.
L_TOTAL = L_TOTAL + <F_FS12>.
ENDIF.
L_FILL = L_FILL + 1.
IF L_FILL = L_TOT.
ASSIGN L_TOTAL TO <F_FS12>.
ASSIGN COMPONENT 'TOTAL' OF STRUCTURE <F_WA> TO <F_FS13>.
<F_FS13> = <F_FS12>.
ENDIF.
AT END OF <F_FS2>-TKNUM.
APPEND <F_WA> TO <F_FS>.
CLEAR <F_WA>.
ENDAT.
ENDLOOP.
CLEAR: <F_FS6>,
<F_FS7>,
<F_WA>.
*Call the screen where Custom container is defined
CALL SCREEN 0100.
ENDFORM. " display_data
Regards
Kannaiah -
Steps to create interactive alv report
plz tell me the steps needed to create interactive alv report. explaining the importance of events. please tell me with suitable example
Hello Yogesh,
I did not see as you mentioned Interactive ALV , sorry for wrong reply.
Please use proper parameter to function module ,here you need to use user command,this user command will call form routine(Dynamic) ,here you can do whatever ,below example one interactive ,if user clicks on material it will goto MM02 transaction.
See the simple example one in ALV :
REPORT Z_GET_REFRESH no standard page heading.
type-pools : slis.
tables : makt,
mara.
data : i_fieldcat type slis_t_fieldcat_alv.
data : begin of i_makt occurs 0,
matnr like makt-matnr,
maktx like makt-maktx,
end of i_makt.
data : v_repid like sy-repid,
g_user_command type slis_formname value 'USER_COMMAND',
g_status_set type slis_formname value 'SET_PF_STATUS'.
DATA:LC_GLAY TYPE LVC_S_GLAY.
select-options s_matnr for mara-matnr .
start-of-selection.
select matnr maktx from makt into table i_makt
where matnr in s_matnr.
end-of-selection.
Fill the fieldcatlog
perform fill_field.
Call the FM
perform call_fm.
*& Form fill_field
text
--> p1 text
<-- p2 text
FORM fill_field.
data wa_fieldcat type slis_fieldcat_alv.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-outputlen = '18'.
wa_fieldcat-seltext_l = 'Material #'.
wa_fieldcat-col_pos = '1'.
append wa_fieldcat to i_fieldcat.
clear : wa_fieldcat.
wa_fieldcat-tabname = 'I_MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-outputlen = '40'.
wa_fieldcat-seltext_l = 'Material Desc'.
wa_fieldcat-col_pos = '2'.
append wa_fieldcat to i_fieldcat.
ENDFORM. " fill_field
*& Form call_fm
text
--> p1 text
<-- p2 text
FORM call_fm.
v_repid = sy-repid.
LC_GLAY-EDT_CLL_CB = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = v_repid
I_CALLBACK_PF_STATUS_SET = g_status_set
I_CALLBACK_USER_COMMAND = g_user_command
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS = LC_GLAY
IS_LAYOUT =
IT_FIELDCAT = i_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_ADD_FIELDCAT =
IT_HYPERLINK =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IT_EXCEPT_QINFO =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = i_makt
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_fm
FORM USER_COMMAND *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
data i_RSPARAMS like RSPARAMS occurs 0.
CASE R_UCOMM.
WHEN '&IC1'.
read table i_makt index rs_selfield-tabindex.
SET PARAMETER ID 'MAT' FIELD i_makt-matnr.
if not i_makt-matnr is initial.
call transaction 'MM02' and skip first screen.
endif.
when 'REFRESH'.
CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
EXPORTING
CURR_REPORT = v_repid
IMPORTING
SP =
TABLES
SELECTION_TABLE = i_RSPARAMS
EXCEPTIONS
NOT_FOUND = 1
NO_REPORT = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
submit z_get_refresh with selection-table i_RSPARAMS.
rs_selfield-refresh = 'X'.
ENDCASE.
MOVE 'REFRESH' TO r_ucomm.
ENDFORM.
FORM set_pf_status *
FORM SET_PF_STATUS USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM.
Thanks
Seshu -
How to create 2 ALV output lists in a single output?
Hi guys...
My clients requirement is to create 2 ALV output lists in a single output list.how can i do this?i mean which function module i can use for this requirement?please help me out...
Regards..*& Report ZLCL_ALV_INT_INVOICE *
REPORT ZLCL_ALV_INT_INVOICE .
DATA: O_CONT1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
O_CONT2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
O_GRID1 TYPE REF TO CL_GUI_ALV_GRID,
O_GRID2 TYPE REF TO CL_GUI_ALV_GRID.
DATA: IT_VBRK LIKE VBRK OCCURS 1 WITH HEADER LINE.
DATA: IT_VBRP LIKE VBRP OCCURS 1 WITH HEADER LINE.
DATA: WA_VBRK LIKE VBRK.
*--Layout
DATA: WA_LAYO TYPE LVC_S_LAYO.
CLASS LCL_BILLING DEFINITION
CLASS LCL_BILLING DEFINITION.
PUBLIC SECTION.
CLASS-METHODS: HANDLE_HOTSPOT_CLICK
FOR EVENT HOTSPOT_CLICK
OF CL_GUI_ALV_GRID
IMPORTING E_ROW_ID.
ENDCLASS. "LCL_BILLING DEFINITION
CLASS LCL_BILLING IMPLEMENTATION
CLASS LCL_BILLING IMPLEMENTATION.
METHOD HANDLE_HOTSPOT_CLICK.
IF NOT E_ROW_ID IS INITIAL.
*--Reading selected billing docno
READ TABLE IT_VBRK INTO WA_VBRK INDEX E_ROW_ID-INDEX.
*--GETTING BILLING DOC ITEMS
REFRESH IT_VBRP.
SELECT *
FROM VBRP
INTO TABLE IT_VBRP
WHERE VBELN = WA_VBRK-VBELN.
CALL SCREEN 200.
ENDIF.
ENDMETHOD. "HANDLE_HOTSPOT_CLICK
ENDCLASS. "LCL_BILLING IMPLEMENTATION
SELECT-OPTIONS: S_VBELN FOR IT_VBRK-VBELN.
START-OF-SELECTION.
PERFORM GET_DATA.
SET SCREEN 100.
*& Form GET_DATA
text
FORM GET_DATA .
*--billing header data
SELECT *
FROM VBRK
INTO TABLE IT_VBRK
WHERE VBELN IN S_VBELN.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'No Data Found'.
ENDIF.
EXIT.
ENDFORM. " GET_DATA
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MENU'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
PERFORM EXIT_PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module PBO_100 OUTPUT
text
MODULE PBO_100 OUTPUT.
IF O_CONT1 IS INITIAL.
CREATE OBJECT O_CONT1
EXPORTING
CONTAINER_NAME = 'VBRK_CONT'
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in container'.
EXIT.
ENDIF.
CREATE OBJECT O_GRID1
EXPORTING
I_PARENT = O_CONT1
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in Grid'.
EXIT.
ENDIF.
ENDIF.
*--Layout for 1st grid
WA_LAYO-KEYHOT = 'X'.
WA_LAYO-GRID_TITLE = 'Billing Document Header Data'.
CALL METHOD O_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'VBRK'
IS_LAYOUT = WA_LAYO
CHANGING
IT_OUTTAB = IT_VBRK[]
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in showing grid'.
EXIT.
ENDIF.
*-Setting the focus on the grid
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
EXPORTING
CONTROL = O_GRID1 "Grid control object
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in setting focus'.
ENDIF.
*--Event handler registration
SET HANDLER LCL_BILLING=>HANDLE_HOTSPOT_CLICK FOR O_GRID1.
ENDMODULE. " PBO_100 OUTPUT
*& Module STATUS_0200 OUTPUT
text
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'MENU'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module USER_COMMAND_0200 INPUT
text
MODULE USER_COMMAND_0200 INPUT.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE TO SCREEN 100.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Module PBO_200 OUTPUT
text
MODULE PBO_200 OUTPUT.
IF O_CONT2 IS INITIAL.
CREATE OBJECT O_CONT2
EXPORTING
CONTAINER_NAME = 'VBRP_CONT'
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
CREATE_ERROR = 3
LIFETIME_ERROR = 4
LIFETIME_DYNPRO_DYNPRO_LINK = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in container'.
EXIT.
ENDIF.
CREATE OBJECT O_GRID2
EXPORTING
I_PARENT = O_CONT2
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in grid linking'.
EXIT.
ENDIF.
CALL METHOD O_GRID2->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_STRUCTURE_NAME = 'VBRP'
CHANGING
IT_OUTTAB = IT_VBRP[]
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
*--refreshing the alv grid with the latest content of the internal table
*--which is linked
CALL METHOD O_GRID2->REFRESH_TABLE_DISPLAY
EXCEPTIONS
FINISHED = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in Refreshing gird'.
ENDIF.
ENDIF.
ENDMODULE. " PBO_200 OUTPUT
*& Form EXIT_PROGRAM
text
FORM EXIT_PROGRAM .
*--Deallocating the memory
IF NOT O_CONT2 IS INITIAL.
CALL METHOD O_CONT2->FREE
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in deallocating memory'.
EXIT.
ENDIF.
CLEAR: IT_VBRP,
IT_VBRP[].
FREE: IT_VBRP,
IT_VBRP[].
ENDIF.
IF NOT O_CONT1 IS INITIAL.
CALL METHOD O_CONT1->FREE
EXCEPTIONS
CNTL_ERROR = 1
CNTL_SYSTEM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in deallocating memory'.
EXIT.
ENDIF.
CLEAR: IT_VBRK,
IT_VBRK[].
FREE: IT_VBRK,
IT_VBRK[].
ENDIF.
*--Cearing the buffered content
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE I000(Z00) WITH 'Error in clearing Buffer'.
EXIT.
ENDIF.
LEAVE PROGRAM.
ENDFORM. " EXIT_PROGRAM
SCREEN 100
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
MODULE PBO_100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
SCREEN200
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
MODULE PBO_200.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0200. -
Create simple ALV using Classes
hi all,
How to create a ALV report using Classes....?
any links or feedback will be appreciated.
Thanks in Advance.Check this Sample code using Docking container. In case of docking container no need of custom container required on screen.
REPORT ztest_oo_a.
DATA: it_flight TYPE sflight_tab1.
DATA: dock TYPE REF TO cl_gui_docking_container,
grid TYPE REF TO cl_gui_alv_grid.
SELECT *
FROM sflight
INTO TABLE it_flight
UP TO 20 ROWS.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SATR'.
CREATE OBJECT dock
EXPORTING
repid = sy-repid
dynnr = '100'
extension = '1500'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
IF sy-subrc ne 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CREATE OBJECT grid EXPORTING i_parent = dock.
CALL METHOD grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
it_outtab = it_flight
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc ne 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Flow Logic
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100. -
Show screen when ALV event finishes
Hello,
I have created an ALV. When the event &DATA_SAVE is thrown, some code is executed and the ALV is shown again. Is it possible to show another screen (for example a screen made of write instrucions) instead of the ALV (grid) when the code of &DATA_SAVE finishes?
The event is implemented at function USER_COMMAND when the RF_UCOMM variable gets the value u2018&DATA_SAVEu2019.
Thanks in advance,
Ricard.In the function module Interface, import the value of parameter "E_EXIT_CAUSED_BY_CALLER" into a variable let's say V_FLAG.
Within DATA_SAVe set RS_SELFILED-EXIT = 'X'.
After Function module call, check if v_FLAG = 'X', then write your code.
Within USER_COMMAND,
case r_ucomm.
when 'u2018&DATA_SAVEu2019.
rs_selfield-exit ='X'.
when others.
endcase.
In FM call,
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
IMPORTING
E_EXIT_CAUSED_BY_CALLER = v_flag
EXCEPTIONS
If sy-subrc = 0 and V_Flag = 'X'.
write: 'Aghsdf'.
endif.
Reward if useful. -
Create a ALV report with fields editable and entry to be saved in ztable
Hello Experts,
I have created the ALV report which has two of the fields editable. Now whenever user puts an entry in the ALV it has to be saved in the ZTABLE.
The report is displayed with editable fields but i'm not sure what has to be written in the 'USER COMMAND' subroutine to save the entries in ztable.
Please see my code belwo:-
gd_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'ALV_USER_COMM'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
TABLES
t_outtab = it_bg2
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Thanks,
Naveen
Edited by: jaikrishna on Sep 4, 2010 8:13 AMHi,
I have worked on similar requirement. You can do that on sy-ucomm value only and you have to call a FM and a method. For that end user has to click on a button which you need to create in the application toolbar. Say that button function code is 'SAVE'. Write the following code in your user command :
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
*Code to reflect the changes done in the internal table
DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA
IMPORTING
E_VALID = L_VALID.
ENDIF.
CASE SY-UCOMM.
WHEN 'SAVE'.
*Data will come with the edited values from ALV
*Here you write your code to save entries into Z table
ENDCASE.
ENDFORM. "USER_COMMAND
Thanks & Regards,
Rock. -
Hi
can any body tell me Steps to create OO alv?
regards,
dhananjaahi
Please serach in SDN before posting.There are lot of threads and wiki pages available.Please check it.
http://wiki.sdn.sap.com/wiki/display/Snippets/AsimpleprogramonALV+OOPS
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=61243570 -
To create an alv, using more than one table
Hello,
I'm new to abap. I want to create an alv. I have to use two internal table, first ( say ibkpf ) as a header and display corresponding detail from another internal table ( say ibseg ).
I intend to use
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' in my program.
Can this be done and if yes how?
Thanks.
UshmaHi ,
Check the following code...
*REPORT zdemo_alvgrid .
TABLES: EKKO.
TYPE-POOLS: SLIS. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF T_EKKO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
STATU TYPE EKPO-STATU,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
MENGE TYPE EKPO-MENGE,
MEINS TYPE EKPO-MEINS,
NETPR TYPE EKPO-NETPR,
PEINH TYPE EKPO-PEINH,
LINE_COLOR(4) TYPE C, "Used to store row color attributes
END OF T_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF T_EKKO INITIAL SIZE 0,
WA_EKKO TYPE T_EKKO.
*ALV data declarations
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
GD_REPID LIKE SY-REPID.
*Start-of-selection.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM DISPLAY_ALV_REPORT.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
FORM BUILD_FIELDCATALOG.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
FIELDCATALOG-FIELDNAME = 'EBELN'.
FIELDCATALOG-SELTEXT_M = 'Purchase Order'.
FIELDCATALOG-COL_POS = 0.
FIELDCATALOG-OUTPUTLEN = 10.
FIELDCATALOG-EMPHASIZE = 'X'.
FIELDCATALOG-KEY = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'EBELP'.
FIELDCATALOG-SELTEXT_M = 'PO Item'.
FIELDCATALOG-COL_POS = 1.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'STATU'.
FIELDCATALOG-SELTEXT_M = 'Status'.
FIELDCATALOG-COL_POS = 2.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AEDAT'.
FIELDCATALOG-SELTEXT_M = 'Item change date'.
FIELDCATALOG-COL_POS = 3.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MATNR'.
FIELDCATALOG-SELTEXT_M = 'Material Number'.
FIELDCATALOG-COL_POS = 4.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MENGE'.
FIELDCATALOG-SELTEXT_M = 'PO quantity'.
FIELDCATALOG-COL_POS = 5.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MEINS'.
FIELDCATALOG-SELTEXT_M = 'Order Unit'.
FIELDCATALOG-COL_POS = 6.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'NETPR'.
FIELDCATALOG-SELTEXT_M = 'Net Price'.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-DATATYPE = 'CURR'.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PEINH'.
FIELDCATALOG-SELTEXT_M = 'Price Unit'.
FIELDCATALOG-COL_POS = 8.
APPEND FIELDCATALOG TO FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
FORM BUILD_LAYOUT.
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'Totals'(201).
Set layout field for row attributes(i.e. color)
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
ENDFORM. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
FORM DISPLAY_ALV_REPORT.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GD_REPID
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
IS_LAYOUT = GD_LAYOUT
IT_FIELDCAT = FIELDCATALOG[]
it_special_groups = gd_tabgroup
IT_EVENTS = GT_XEVENTS
I_SAVE = 'X'
is_variant = z_template
TABLES
T_OUTTAB = IT_EKKO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
DATA: LD_COLOR(1) TYPE C.
SELECT EBELN EBELP STATU AEDAT MATNR MENGE MEINS NETPR PEINH
UP TO 10 ROWS
FROM EKPO
INTO TABLE IT_EKKO.
*Populate field with color attributes
LOOP AT IT_EKKO INTO WA_EKKO.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
i.e. wa_ekko-line_color = 'C410'
LD_COLOR = LD_COLOR + 1.
Only 7 colours so need to reset color value
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_EKKO-LINE_COLOR.
wa_ekko-line_color = 'C410'.
MODIFY IT_EKKO FROM WA_EKKO.
ENDLOOP.
ENDFORM. " DATA_RETRIEVAL
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Apr 10, 2008 5:30 PM -
How to create editable ALV grid/list
Hi,
I want to create editable ALV grid/list so that user can modify the data in the ALV.
And when user presses save button data will get saved in Z table.
I dont know how to create editable ALV so could anybody please help me regarding this?
Thanks & regards,
Sameer DhukeHI
check the demo programs BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDITABLE
REUSE_ALV_GRID EDITABLE
ALV Grid editable fields
Just to make things a bit easy
In the layout,there is a property called edit, make it 'X' for the particular field whichever you want to make editable.
Hope this helps,
Suruchi
Message was edited by:
Suruchi Mahajan -
I want to create an ALV with two row fields name
Hi
I want to create an ALV with two row fields name. please suggest how to do it or send some sample code
thanksHi,
see this link
http://****************/Tutorials/ALV/ALVMainPage.htm
http://www.alvrobot.com.ar/tutorial.php
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b09ac4d5-e3ad-2910-6a81-96d1b861928c
http://abapprogramming.blogspot.com/2007/11/alv-check-boxes-sample-code.html
REPORT zalv5 NO STANDARD PAGE HEADING.
Description----
TOPICS INTRODUCED:
1. Learn about the u2018Standardu2019 PF-Status that comes as default.
2. Exclude function codes from u2018Standardu2019 PF-Status and customize it.
TYPE-POOLS: slis.
DATA: BEGIN OF i_data OCCURS 0,
qmnum LIKE qmel-qmnum,
qmart LIKE qmel-qmart,
qmtxt LIKE qmel-qmtxt,
ws_row TYPE i,
ws_char(5) TYPE c,
chk,
END OF i_data.
DATA: report_id LIKE sy-repid.
DATA: ws_title TYPE lvc_title VALUE 'An ALV Report'.
DATA: i_layout TYPE slis_layout_alv.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: i_events TYPE slis_t_event.
DATA: i_header TYPE slis_t_listheader.
DATA: i_extab TYPE slis_t_extab.
SELECT qmnum
qmart
qmtxt
INTO TABLE i_data
FROM qmel
WHERE qmnum <= '00030000010'. LOOP AT i_data. i_data-ws_row = sy-tabix. i_data-ws_char = 'AAAAA'. MODIFY i_data. ENDLOOP. report_id = sy-repid. PERFORM f1000_layout_init CHANGING i_layout. PERFORM f2000_fieldcat_init CHANGING i_fieldcat. PERFORM f3000_build_header CHANGING i_header. PERFORM f4000_events_init CHANGING i_events. CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY' EXPORTING * I_INTERFACE_CHECK = ' ' * I_BYPASSING_BUFFER = * I_BUFFER_ACTIVE = ' ' i_callback_program = report_id * I_CALLBACK_PF_STATUS_SET = ' ' * I_CALLBACK_USER_COMMAND = ' ' * I_CALLBACK_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_TOP_OF_PAGE = ' ' * I_CALLBACK_HTML_END_OF_LIST = ' ' * i_structure_name = ' ' * I_BACKGROUND_ID = ' ' i_grid_title = ws_title * I_GRID_SETTINGS = is_layout = i_layout it_fieldcat = i_fieldcat * IT_EXCLUDING = * IT_SPECIAL_GROUPS = * IT_SORT = * IT_FILTER = * IS_SEL_HIDE = * I_DEFAULT = 'X' i_save = 'A' * IS_VARIANT = it_events = i_events * IT_EVENT_EXIT = * IS_PRINT = * IS_REPREP_ID = * I_SCREEN_START_COLUMN = 0 * I_SCREEN_START_LINE = 0 * I_SCREEN_END_COLUMN = 0 * I_SCREEN_END_LINE = 0 * IT_ALV_GRAPHICS = * IT_ADD_FIELDCAT = * IT_HYPERLINK = * IMPORTING * E_EXIT_CAUSED_BY_CALLER = * ES_EXIT_CAUSED_BY_USER = TABLES t_outtab = i_data EXCEPTIONS program_error = 1 OTHERS = 2 . IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& Form F1000_Layout_Init
FORM f1000_layout_init USING i_layout TYPE slis_layout_alv.
CLEAR i_layout.
i_layout-colwidth_optimize = 'X'.
i_layout-edit = 'X'.
ENDFORM. " F1000_Layout_Init
*& Form f2000_fieldcat_init
FORM f2000_fieldcat_init CHANGING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: line_fieldcat TYPE slis_fieldcat_alv.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMNUM'. " The field name and the table
line_fieldcat-tabname = 'I_DATA'. " name are the two minimum req.
line_fieldcat-key = 'X'. " Specifies the column as a key (Blue)
line_fieldcat-seltext_m = 'Notification No.'. " Column Header
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMART'.
line_fieldcat-ref_tabname = 'I_DATA'.
line_fieldcat-hotspot = 'X'. " Shows the field as a hotspot.
line_fieldcat-seltext_m = 'Notif Type'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'QMTXT'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Description'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_ROW'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_m = 'Row Number'.
APPEND line_fieldcat TO i_fieldcat.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'WS_CHAR'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Test Character Field'.
line_fieldcat-datatype = 'CHAR'.
line_fieldcat-outputlen = '15'. " You can specify the width of a
APPEND line_fieldcat TO i_fieldcat. " column.
CLEAR line_fieldcat.
line_fieldcat-fieldname = 'CHK'.
line_fieldcat-tabname = 'I_DATA'.
line_fieldcat-seltext_l = 'Checkbox'.
line_fieldcat-checkbox = 'X'. " Display this field as a checkbox
line_fieldcat-edit = 'X'. " This option ensures that you can
" edit the checkbox. Else it will
" be protected.
APPEND line_fieldcat TO i_fieldcat.
ENDFORM. " f2000_fieldcat_init
*& Form f3000_build_header
FORM f3000_build_header USING i_header TYPE slis_t_listheader.
DATA: gs_line TYPE slis_listheader.
CLEAR gs_line.
gs_line-typ = 'H'.
gs_line-info = 'This is line of type HEADER'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'S'.
gs_line-key = 'STATUS 1'.
gs_line-info = 'This is line of type STATUS'.
APPEND gs_line TO i_header.
gs_line-key = 'STATUS 2'.
gs_line-info = 'This is also line of type STATUS'.
APPEND gs_line TO i_header.
CLEAR gs_line.
gs_line-typ = 'A'.
gs_line-info = 'This is line of type ACTION'.
APPEND gs_line TO i_header.
ENDFORM. " f3000_build_header
*& Form f4000_events_init
FORM f4000_events_init CHANGING i_events TYPE slis_t_event.
DATA: line_event TYPE slis_alv_event.
CLEAR line_event.
line_event-name = 'TOP_OF_PAGE'.
line_event-form = 'F4100_TOP_OF_PAGE'.
APPEND line_event TO i_events.
CLEAR line_event.
line_event-name = 'PF_STATUS_SET'.
line_event-form = 'F4200_PF_STATUS_SET'.
APPEND line_event TO i_events.
ENDFORM. " f3000_events_init
FORM F4100_TOP_OF_PAGE *
FORM f4100_top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = i_header.
ENDFORM.
FORM F4200_PF_STATUS_SET *
FORM f4200_pf_status_set USING i_extab TYPE slis_t_extab.
REFRESH i_extab.
PERFORM f4210_exclude_fcodes CHANGING i_extab.
SET PF-STATUS 'STANDARD' OF PROGRAM 'SAPLSALV' EXCLUDING i_extab.
ENDFORM.
*& Form f4210_exclude_fcodes
FORM f4210_exclude_fcodes USING i_extab TYPE slis_t_extab.
DATA: ws_fcode TYPE slis_extab.
CLEAR ws_fcode.
ws_fcode = '&EB9'. " Call up Report.
APPEND ws_fcode TO i_extab.
ws_fcode = '&ABC'. " ABC Analysis.
APPEND ws_fcode TO i_extab.
ws_fcode = '&NFO'. " Info Select.
APPEND ws_fcode TO i_extab.
ws_fcode = '&LFO'. " Information.
APPEND ws_fcode TO i_extab.
ENDFORM. " f4210_exclude_fcodes
thanks
karthik
reward me if usefull
Maybe you are looking for
-
How do I get a button to launch a new frame within a frame?
I'm very new to Java and am using Jdeveloper9i. I am writing a stand alone application that has a frame with fields e.g. name, emailid etc and have provided a "Modify" button, which I want to call up another frame/panel with text fields to allow the
-
Question concerning document icons changing
after I loaded 10.5.6 the majority of my document icons on my desktop do not show what type of document they are. If I create a folder on my desktop and place the document into the new folder the icons show the kind of file that it is i.e. adobe icon
-
Why can't I rotate monitor on XP side
We bought Mac Pro. (Hoping to replace all Dells in the office with Macs running Windows.) Have ATI 1900 so can run two monitors. Both are the nice Dell rotating montors. We run them side by side in portrait because we read documents all day. Problem
-
9.1 downloaded, but it will not install???? Please help!
I am a long time Mac user. Bought myself a new iMac for my studio. Everything works fine. I have downloaded the 9.1 update and when I install it, it tells me that it cannot install as I already have 9.1, but I do not have 9.1. I am running 9.02. Any
-
How to repair private browsing?
Downloaded "Disable Private Brwosing Plus 1.9" and since the private tab / window and the delete history is gone. How can I delete this addon "Disable Private Brwosing Plus 1.9" or repair the private browsing + delete history. tnx