Create SQL report from reigstry - Local Forefront exclusions

Hi
We are doing a project moving from Forefront Client to SCEP 2012.
We have a lots of virusscan exclusions done at many servers and I would like to list them, hopefully via SCCM so I can configure SCEP with thoose exclusions.
The exclusions are recorded in the registry here:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Microsoft Forefront\Client Security\1.0\AM\Exclusions\Extensions]
Unfortunately I dont know how to create a report to list the data under that registry folder. Can somebody please help me?
I have done the configuration in the mof files.
SCCM 2007.
Thanks!

Hi Garth
Thanks for your answer.
I have used RegKeyToMof before to create inputs to mof files. In this case I dont really know how to use it.
In the article per say:
"You are looking for static keys under: HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Terminal Server\RC"
I'm looking for different exclusions under
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Microsoft Forefront\Client Security\1.0\AM\Exclusions\Paths]. Not static data.
Or, maybe I dont understand how to use the tool.
[EDIT]
Acctually, the local exclusions it the reg. path.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Forefront\Client Security\1.0\AM\Exclusions]
* \Extensions]
* \Paths]
* \Processes]

Similar Messages

How to create a Report from WebDympro

Hi All,
I just want to know how I can create a report from WebDynpro? I need to pull data from R/3 using a RFC function module, but I don't know if it exists a software to create reports.
Thanks in advance
Alexis Ramirez

Hi Rich,
Even i had a similar kind of problem. I wanted to fetch data from BI through the XMLA Connector which are created in Query Designer and then i wanted to fetch these fields and rearrange them and put it in a report format by colouring certain fields. Can the same can be done in WebDynpro.

How can I create a Report from a SWT-Application?

Post Author: mkoch
CA Forum: JAVA
I'm a Developer and new to Crystal Reports and I have the job to create a Report from a SWT-Application.The report-files ( *.rpt) were created with Crystal Reports 10 or 11.> I'm not sure but I have access to a machine where Crystal Reports 10 Developer an Crystal Reports 11 Runtime are installed.Can anybody describe in detail how I can start the creation of a report from my Java-Application?> What libraries are needed, where can I get them and so on.I saw in the CR10-Setup that there is a Java-feature - but unfortunately this is not installed on my test-machine.--> Is it necessary to install this feature or can I get this files on businessobjects.com?Is it possible to start the report-creation from command-line?I saw a Java-example on the internet which uses Report.exe - but I haven't found this on my machine.I hope, that somebody can help me.GreetingsMarkus

Inv. #
Item
Sale Price
Lisa
Oct Sold 12
Oct Sold 12-2
Oct Sold 12-3
149
Vase Lidded
25
201
Bird
7
7
202
Bird
7
203
Bird
7
204
Bird
7
7
205
Bird
7
7
206
Bird
7
7
207
Bird
7
207
Bird
7
7
208
Bird
7
7
209
Bird
7
7
This is my very simple inventory. On previous program I could sort by those items that did not have any figure in the row across. Then I could print a report of open inventory. Such as 149 Lidded Vase has not sales amount in the four colums across, thus it is open inventory. How can I capture all those items in one report?

3.1 Bug Report: "Enable Search" in Create SQL Report wizard

Hi,
when "Enable Search" is set to Yes in the "Create SQL Report" wizard, the label template of the page items is set to NULL, it should be "Optional Label" (the default of the theme).
The PX_ROWS page item is not referenced in the "Number of Rows (Item)" property of the report. That means the user can choose what he wants, it never gets used.
BTW, it would be useful to write the PX_ROWS into a user preference when the page gets submitted and based the source type on this preference.
Thanks for looking into it.
Patrick
My APEX Blog: http://www.inside-oracle-apex.com/
The APEX Builder Plugin: http://builderplugin.oracleapex.info/ New
The ApexLib Framework: http://apexlib.sourceforge.net/

Hi Christina,
just noticed that the "Reset Pagination" process which is also generated by the wizard doesn't contain the request "Reset" in the Condition Expression 1
-> Pressing the Reset button should always set the report to the beginning.
Thanks
Patrick
My APEX Blog: http://www.inside-oracle-apex.com/
The APEX Builder Plugin: http://builderplugin.oracleapex.info/
The ApexLib Framework: http://apexlib.sourceforge.net/

Report template 101 - Comment Bubbles (used during creating SQL Report)

Hi,
There is a Report template type - Comment Bubbles [ Theme - 24, 25, 26 ]
Has anyone ever tried using this template while creating SQL Report.
OR if anyone knows how to use this and what should be the syntax of SQL query for using this template.
Thanks,
Deepak

Hi Deepak.
I assume you're running APEX 4.2
There is a packaged application included with 4.2 which is called "Customer Tracker"
On page 50 you find a rewgion where these comment bubles are used ( unlock the application to view the source ).
Regards
Bas

Creating a Report from Excel

I'm trying to create a report from an Excel spreadsheet and am having some issues with how Crystal is reading in the data. I have 7 fields that are all the same, I want them to be Numeric fields. However, when I import the Excel sheet as the data source, 4/7 of the fields import as string fields into Crystal. At first I didn't think this would be an issue, but some of the fields, and it doesn't seem to be consistently the "string" only or the "numeric" only fields, do not seem to be printing to the report at all - the space where they should be ends up blank. I have gone back to the Excel sheet several times to change the cell format to Numeric, but that has not helped. I also tried changing the format in Crystal, using ToNumeric(fieldname) or ToText(fieldname), and neither of those functions seem to work either.
Has anyone had this issue before or know how to fix it?

Hi Jeremy,
Which Crystal Report version are you using?
Have you applied any service pack for Crystal Reports?
Which Operating system are you using?
Is the issue is with all the report or single report?
For testing purpose:
-Create new excell sheet with two columns one is numeric and other one string.
-Create report using thie excell sheet.
-Preview report and export.
-Now print report
Are you getting same results?
Have you tried to print other document through that printer is it working properly.
Regards,
Shweta

APEX 3.0: Create SQL Report Wizard raises a Javascript error

Hi,
in the "Create SQL Report Wizard" (Create Page/Report/SQL Report) when you click onto the "Generic Columns" radio group the following JavaScript error is displayed.
disItem.style has no properties
disableItems("html_RadioValue('P4795_GENERIC_COLS')=='N'", "P4795_MAX_COLUMNS", undefined, undefined, undefined, undefined, undefined, undefined, undefined, undefined, undefined)
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net

Sharon,
sorry was not clear enough. It's just a Javascript error which shows up, it doesn't stop me to create the report. I just noticed that there seems to be a functionality which isn't completely implemented.
I'm using FF 2.0 with the Firebug plugin, that's why I immediately see if an error occurs on a page.
Reproduced the same behavior on apex.oracle.com
1) Create Page
2) Report
3) SQL Report
4) Press Next
5) Press Next
6) Click on "Generic columns" radio option
7) In FF go to Tools/Error Console => you should see the error (maybe you have to filter for Errors)
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com
Check out the ApexLib Framework: http://apexlib.sourceforge.net

Creating a new connection when creating a report from scratch

I've searched all around but I haven't managed to find any samples or forum posts that show how to create a connection when creating a report from scratch via RCAPI. All of the code that I've found has been aimed at replacing the ConnectionInfo for an existing connection. I figured that it would work something like this:
m_crystalReport.setReportAppServer(ReportClientDocument.inprocConnectionString);
m_crystalReport.newDocument();
IConnectionInfo ci = new ConnectionInfo();
PropertyBag propertyBag = new PropertyBag();
propertyBag.put("Use JDBC", true);
propertyBag.put("Connection URL", "jdbc:jtds:sqlserver://localhost:1433;databaseName=" + DB_NAME);
propertyBag.put("Database Class Name", "net.sourceforge.jtds.jdbc.Driver");
propertyBag.put("Database DLL", "crdb_jdbc.dll");
ci.setAttributes(propertyBag);
m_connection = new Connection();
m_connection.setConnectionInfo(ci);
m_connection.open();
but this produces a NullPointerException within Connection.open(). If I leave the connection closed but add it to the report via DatabaseController.addConnection() then I just get the exception later on when I try to add tables using the connection.
Can anyone give me any pointers please?
Thanks,
Rich.

Just in case anyone else runs into this, I managed to fix it by leaving the connection closed and then using the connection info instead of the connection when creating tables, eg:
     ITable t = new Table();
     t.setAlias(v.getAlias());
     t.setName(v.getView().getName());
     t.setConnectionInfo(m_connectionInfo);
     getDatabaseController().addTable(t, null);

Create a report from scratch, add Table and Datasource Problem

Hi,
I'm using the latest Crystal Reports Runtime supplied for eclipse.
I want to create a report from scratch, add a Table and then add a ArrayList of Pojos as the Datasource.
But unfortunately depending on the ConnectionInfo I supply to the Table I get different errors.
I looked through the samples and see that I have to supply properties
like
"Database DLL", "crdb_javabeans.dll" and ConnectionInfo.setUserName("");
     ConnectionInfo.setPassword(null)
I looked through the forums and find different set of properties.
Actually because I am just working with Pojos I would have thougth that something like the following
would be sufficient:
ReportClientDocument doc = new ReportClientDocument();
            doc.setReportAppServer(ReportClientDocument.inprocConnectionString);
            doc.newDocument();
Table table = new Table();
table.setAlias("reportTable");
table.setName("reportTable");
doc.getDatabaseController().addTable(oTable, null);
doc.getDatabaseController().setDataSource(myCoolection, myClass, "reportTable", "reportTable");
So could someone tell me the right/minimum Set of Properties to make a Table get connected to Pojos?
Edited by: jack mann on Aug 31, 2010 3:25 PM

With XI Release 2, you can come quite close to creating from scratch:
http://technicalsupport.businessobjects.com/KanisaSupportSite
/search.do?cmd=displayKC&docType=kc&externalId=5074668
You need Service Pack 2:
http://support.businessobjects.com/downloads
/service_packs/crystal_reports_en.asp
Sincerely,
Ted Ueda

Problems in create graphical report from Oracle FSG xml output using BIP

We are trying to create graphical reports from Oracle Financial Statement Generator (FSG) xml output. I personally have extensive exposure working with XML (BI) Publisher but until recently I have never tried to use the BIP charting wizard to create graphical reports from FSG xml output out of EBS 11i/R12.
I created an SR with Oracle but they had to create an enhancement request for this issue. Does anyone know or have any idea on how we can accomplish this. The charting wizard pops up but the xml tags available do not make any sense.
If anybody has any idea please send me an email at [email protected]
Thanks,
Leo

Try some thing like following
http://oraclebizint.wordpress.com/2008/03/10/oracle-bi-ee-101332-sending-reports-to-non-obi-users-delivery-manager-api-of-bi-publisher/

How to create APEX report from data in PLSQL table

Hi, I have a procedure that is creating/inserting records into multidimensional pslql table. I want to create a report and graph based on the data stored in plsql table. Can someone please advice how to can I select this data in apex OR point me to any sample code?
Thanks
Aali

Hi,
try to google something about ORACLE TABLE CAST
SELECT ot.yourcolumn
FROM
TABLE(CAST(yourplsqltablevariable AS userdefinedoracletype)) otE.g.
http://it.toolbox.com/blogs/oracle-guide/using-a-plsql-table-in-sql-11013
Regards,
R.

BO v5.1 - creating a report from an oracle stored procedure

Post Author: newrochelle
CA Forum: Publishing
hi to all,
im using BO 5.1 and i need to create a document from an oracle stored procedure that have only one IN parameter and ten OUT parameters.
Creating the new report I selected the database connection then I choose the stored procedure name from the list, I inserted the value for the IN parameter and finally I click on Run button.
I got the following error message:
ORA-06550: line 1, column 38: :PLS-00103: Encountered the symbol
"," when expecting one of the following: : : ( - + case mod
new not null others <an identifier> : <a double-quoted
delimited-identifier> <a bind variable> avg : count current
exists max min prior sql stddev sum variance : execute forall
merge time timestamp interval date : <a string literal with
character set specification> : <a number> <a single-quoted SQL
string> pipe : <an alternatively-quoted string literal with
character set specification> : <an alternatively-q :-6550
it seems to be caused by the OUT parameters!
i leaved them without any value.
it's the first time that I used a stored procedure to create a BO report, but I think the OUT parameters are needed to do that, otherwise what data will be presented in the report???
can you help me?
please answear me ASAP.
Thank's in advance
Regards
Andrea

Post Author: synapsevampire
CA Forum: Publishing
Try posting in a BO forum, this is Crystal Reports.
-k

Creating a report from scratch in java and getting invalidfield error

hello
I am trying to generate a report java.
I am getting invalidfieldobject - the field was not found
I checked the resultset and it does contain the column called trn
package com.surecomp;
import java.io.ByteArrayInputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.OutputStream;
import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument;
import com.crystaldecisions.sdk.occa.report.data.DBField;
import com.crystaldecisions.sdk.occa.report.data.FieldValueType;
import com.crystaldecisions.sdk.occa.report.definition.FieldObject;
import com.crystaldecisions.sdk.occa.report.definition.ISection;
import com.crystaldecisions.sdk.occa.report.exportoptions.ReportExportFormat;
import com.crystaldecisions.sdk.occa.report.lib.ReportSDKException;
public class reporting {
     public static void main(String[] args) {
          reporting x = new reporting();
          x.run();
     public void run() {
          try {
               java.sql.ResultSet javaResultSet = null;
               Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver");
               java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:sqlserver://ssi-allmatch:1433;databaseName=mrmdus33xxx;","sa", "sa12");
               java.sql.Statement statement = connection.createStatement();
               javaResultSet = statement.executeQuery("select * from trades");
               ReportClientDocument boReportClientDocument = new ReportClientDocument();
               boReportClientDocument.newDocument();
               boReportClientDocument.getDatabaseController().addDataSource(javaResultSet);
               ISection boSectionToAddTo = boReportClientDocument.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0);
               // Create a new Database Field Object
               DBField boDBField = new DBField();
               boDBField.setName("trades.trn");
               boDBField.setHeadingText("trn");
               boDBField.setType(FieldValueType.stringField);
               FieldObject boFieldObject = new FieldObject();
               boFieldObject.setDataSourceName(boDBField.getFormulaForm());
               boFieldObject.setFieldValueType(boDBField.getType());
               boFieldObject.setLeft(9000);
               boFieldObject.setTop(1);
               boFieldObject.setWidth(1911);
               boFieldObject.setHeight(226);
               boReportClientDocument.getReportDefController().getReportObjectController().add(boFieldObject, boSectionToAddTo, -1);
               ByteArrayInputStream byteArrayInputStream = null;
               byteArrayInputStream = (ByteArrayInputStream) boReportClientDocument.getPrintOutputController().export(ReportExportFormat.PDF);
               writeFileFromInputStream("c:/bob.pdf",byteArrayInputStream);
          catch(ReportSDKException ex) {
               System.out.println(ex);
          catch(Exception ex) {
               System.out.println(ex);
    private void writeFileFromInputStream(String sfile, ByteArrayInputStream inputStream) {
         try {
              File file = new File(sfile);
              OutputStream outputStream = new FileOutputStream(file);
              int bytesRead = 0;
              byte [] buffer = new byte[32768];
              while ((bytesRead = inputStream.read(buffer, 0, 32768)) != -1) {
                        outputStream.write(buffer, 0, bytesRead);
              outputStream.close();
              inputStream.close();
         } catch (Throwable th) {

Hi,
I have the same problem, did you get this resolved? I am new to the Crystal Report Java SDK and want to create reports from scratch but I can't find any good resources on the internet or the website.

How to exclude one or more rows of SQL report from sorting?

In my SQL report I want to exclude one row from sorting. This row must be permanently at the bottom of the report.
How to achieve this?
Regards,
Al

Hi Al,
Check out this thread: Sort within Break? I was looking to preserve a basic sort for break purposes, but the same solution should work for keeping one row at the bottom.
Let me know if you'd like more details.
--Jennifer

Creating a report from Microsoft AD LDS

I'm trying to create a report (a list of users basically) from a Microsoft AD LDS on Windows 2008. The solution c2016008 describes a way to connect to a AD source using NT authentication, which isn't an viable option in this case. I figure I could use the JNDI-interface to connect and I added <JNDIConnectionFactory>com.sun.jndi.ldap.LdapCtxFactory</JNDIConnectionFactory> to CRConfig.xml (as it is the same class our Java application uses succesfully to read data from the source server).
I the connection window I give details as
JNDI Provider URL ldap://hostname:389/
JNDI username CN=amd,OU=User_Accounts,O=Something,C=Else
JNDI password (the user account's password)
Initial context /
I cannot make the connection to the service even with the designer for the first time to do anything. If my username and password are correct after pressing the next-button I get the Data Source Name: -dialogue box, but there isn't anything to choose there. If I press then "Finish" I gen an error message "Details: Invalid connection". What configurations am I missing? I didn't manage to find any other directions to make such on report except the one mentioned in the solution c2016008. The environment is CR 2008.

Depending on the version of CR runtime it may not be possible.
Only version that now support the DB driver for JNDI connections is crdb_xml.dll. This driver is not shipped with ANY version of CR Basic included with Visual Studio.
However we do now provide a download and manual configuration for Crystal Reports Developer for Visual Studio ( 2010/2012). This would/should allow you to connect to a JNDI data source.
You can get the installer for CR for VS from the Overview tab as well as the package to install the XML driver required.
Don

Create SQL report from reigstry - Local Forefront exclusions

Similar Messages

Maybe you are looking for