Creating a multisim compatable model from DSN and .lib files

I'm attempting to model the texas instruments TX810 in multisim however the only model available is a PSPICE compatable model. This consists of a data source name (DSN) file, a .lib file (which when inspected in a text editor appears to be the most similar to a .cir file), a .olb and .opj files. There are also .sim files, .mrk and .prb file which I'm assuming are simulation parameters. I've attempted to model the .lib file by importing it into a custom component within multisim, unfortunately this method caused multiple netlist errors when I attempted simulation.
Any advice would be greatly appreciated
many thanks
Robert

here is a copy of the tx810.lib file
Attachments:
TX810 - Copy.txt ‏68 KB

Similar Messages

How to create automatic creation of BP from customer and vendor master data

Hi gurus,
can any one tell how to create automatic creation of BP from customer and vendor master data.
Please give me the steps.
Thanks
Sasikanth.

HI,
Goto SPRO\ Cross application components \ Master data synchronization \ Synchronization control.
Assign account groups of customer and vendors to respective BP grouping. This setting is enough to create BP in background while creating customer / vendor. But the fields groups are very much important, ensure mandatory fields should be sync.
rgds,
Srini

Creating a Java content tree from scratch and then marshal it to XML data

Hi,
After binding a schema using JAXB binding, I wrote a class to create a Java content tree from scratch and then marshal it to create an XML document. To see if the resulting xml document is correct, I opened it in XMLSpy and tried to validate it against the original schema.... I got the following error:
"Unable to locate a reference to a supported schema kind (DTD, DCD, W3C Schema, XML-Data, Biz Talk) within this document instance"
Then I realized that the generated xml document didnot contain the following for the root element:
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" and xsi:schemaLocation="....."
i.e, the XML Schema Instance namespace and the schema location.
How do I get these attributes incorporated into the XML document generated during the marshal process.
Thanks.

How do I get these attributes incorporated into the XML document generated during the marshal process.
Add xmlns:xsi and xsi:schemaLocation attributes to the root element in the schema.
<xsd:attribute name="xmlns:xsi" fixed="http://www.w3.org/2001/XMLSchema-instance"/>

Problem with ASP "Create form wizard" or "Update form wizard" and "Upload file"

Until now it used version 3,7 and dinamyc had never had problems with "Create form wizard" or "Update form wizard" and "Upload file" but now when I create the form and shipment a file leaves an error to me:
Error:
Error al borrar directorio. Error de seguridad.
Developer Details:
Error al borrar directorio. Error de seguridad. El directorio 'E:\web\eds\maqueta\' esta fuera del directorio base 'E:\web\eds\maqueta\fotosactivi2\'. (FOLDER_DEL_SECURITY_ERROR)
tNG Execution Trace - VIEW
* tNG_insert.executeTransaction
o STARTER.Trigger_Default_Starter
o tNG_insert.doTransaction
+ BEFORE.Trigger_Default_FormValidation
+ tNG_insert.prepareSQL
+ tNG_insert.executeTransaction - execute sql
+ tNG_insert.postExecuteSql
+ AFTER.Trigger_FileUpload*
+ ERROR.Trigger_Default_Insert_RollBack
* tNG_insert.getRecordset
* tNG_insert.getFakeRsArr
* tNG_insert.getLocalRecordset
* tNG_insert.getFakeRecordset
* tNG_insert.getFakeRecordset

Hello,
Please see this thread http://www.adobeforums.com/cgi-bin/webx/.3bc3c678/2
for the same problem.
Regards,
Razvan RACASANU

How to use third party library (like .dll and .lib files) in flascc?

I have a number of .dll and .lib files of the third party library, which are generated from C++ code.
I read about flascc on other web site says:
"If you want to use third party library in your Flascc project,you must have either the source code or the linkable file which is compiled of the third party library "
Dose the linkable file mean .dll file or .lib file?
AND
How can I use the fuctions in them in my flascc project.?

Native code is not interchangeable between platform.
It means that you can't use library that wasn't build specifically for flascc.
And when they say linkable files they mean libraries compiled for flascc, not any libraries.
So if your libs are for windows, no luck, you have to recompile everything

Issue in creating a custom data model from BP

Hi Team
We have a requirement to create a custom data model by copying data model BP. I have successfully created new data model ZP . I have copied the UI for searching from BP. Issue is when i search a business partner ideally it should not display any entries because i have just created the data model, But it is taking entries from BP and getting displayed. Please let me know how to map data model to search UI. I dont see option USMD_MODEL here

Hi Imran,
actually that is not an issue but a designed feature. I'm afraid that you need to re-think your whole project. The explanations is rather simple:
Data model BP in MDG is a so called Re-Use Area data modell. This means that active data (records that are currently not stored in a change request) are saved in existing SAP ERP data base tables like BUT000 for the business partner master data and LFA1 or KNA1 for Vendor or Customer master data.
If you copy data model BP to ZP you still refer to the same active area. You will always find the same active objects - no matter which data model you are actually using for the user interface. The only difference wil occur for objects being currently processed in a change request. In that case a separation between BP and ZP is possible. But this won't help to solve your issue.
From SAP side I can only recommend not to copy BP but to find a different way of integrating your project needs into BP.
Best regards
Michael

Create a continuous data stream from C++, and read it in LabView

Hello all.
I'm working on a project which involves connecting to a motion tracker and reading position and orientation data from it in realtime. The code to get the data is in c++, so I decided that the best way to do this would be to create a c++ DLL file which contains all the necessary functions to first connect to the device and read the data from it, and use the Call Library Function node to feed this data into Labview.
I'm having trouble though, since ideally I would like a continuous stream of data from the c++ code into Labview, and I'm not sure how to achieve this. Putting the call library function node in a while loop seems like an obvious solution, but if I do it this way I would have to reconnect to the device every time I get the data, which is quite a bit too slow.
So my question is, if I created c++ function which created a data stream, could I read this into Labview without having to continually call a function? I'd prefer to only have to call a function once, and then read the data stream until a stop command is given.
I'm using Labview 2010, version 10.0.
Apologies if the question is poorly phrased, many thanks for your help.
Dave
Solved!
Go to Solution.

dr8086 wrote:
This method sounds like an excellent suggestion, but I do have a few questions where I dont think I've understood fully.
From what I understand the basic premise is to use one call library function node to access a DLL which creates an instance of the device object, and passes a pointer too it into labview. Then a seperate call library function node would pass this pointer to another DLL which could access the device object, update it and read the data. This part could be in a while loop and carry on reading the data until a stop command is given.
That's it. I'm including some skeleton code as an example. I'm also including the code because I don't know how much you have experience with multi threading, so I'm showing how you'd have to use critical sections to guard the interactions between threads so that they don't lead to issues.
// exported function to access the devices
extern "C" __declspec(dllexport) int __stdcall init(uintptr_t *ptrOut)
*ptrOut= (uintptr_t)new CDevice();
return 0;
extern "C" __declspec(dllexport) int __stdcall get_data(uintptr_t ptr, double vals[], int size)
return ((CDevice*)ptr)->get_data(vals, size);
extern "C" __declspec(dllexport) int __stdcall close(uintptr_t ptr, double last_vals[], int size)
int r= ((CDevice*)ptr)->close();
((CDevice*)ptr)->get_data(last_vals, size);
delete (CDevice*)ptr;
return r;
// h file
// Represents a device
class CDevice
public:
virtual ~CDevice();
int init();
int get_data(double vals[], int size);
int close();
// only called by new thread
int ThreadProc();
private:
CRITICAL_SECTION rBufferSafe; // Needed for thread saftey
vhtTrackerEmulator *tracker;
HANDLE hThread;
double buffer[500];
int buffer_used;
bool done; // this HAS to be protected by critical section since 2 threads access it. Use a get/set method with critical sections inside
//cpp file
DWORD WINAPI DeviceProc(LPVOID lpParam)
((CDevice*)lpParam)->ThreadProc(); // Call the function to do the work
return 0;
CDevice::~CDevice()
DeleteCriticalSection(&rBufferSafe);
int CDevice::init()
tracker = new vhtTrackerEmulator();
InitializeCriticalSection(&rBufferSafe);
buffer_used= 0;
done= false;
hThread = CreateThread(NULL, 0, DeviceProc, this, 0, NULL); // this thread will now be saving data to an internal buffer
return 0;
int CDevice::get_data(double vals[], int size)
EnterCriticalSection(&rBufferSafe);
if (vals) // provides a way to get the current used buffer size
memcpy(vals, buffer, min(size, buffer_used));
int len= min(size, buffer_used);
buffer_used= 0; // Whatever wasn't read is erased
} else // just return the buffer size
int len= buffer_used;
LeaveCriticalSection(&rBufferSafe);
return len;
int CDevice::close()
done= true;
WaitForSingleObject(hThread, INFINITE); // handle timeouts etc.
delete tracker;
tracker= NULL;
return 0;
int CDevice::ThreadProc()
while (!bdone)
tracker->update();
EnterCriticalSection(&rBufferSafe);
if (buffer_used<500)
buffer[buffer_used++]= tracker->getRawData(0);
LeaveCriticalSection(&rBufferSafe);
Sleep(100);
return 0;
dr8086 wrote:
My main concern is that the object may go out of memory or be deallocated, since it wouldnt be held in any namespace or anything.
Since you create the object with new, the object won't expire until either the dll is unloaded or the process (LabVIEW) closes. So the object will stay valid between dll calls provided LabVIEW didn't unload the dll (which it does if the VIs are closed). When that happens, I'm not exactly sure what happens to live objects (i.e. if you forgot to call close), I imagine the system reclaims the memory but the device might still be open.
What I do to make sure that everything gets closed when the dll unloads before I could call close and delete the object is to everytime I create a new object in the dll I add it to a list, when the dll unloads, if the object is still on the list I delete it.
dr8086 wrote:
I also have a more general programming question about the purpose of the buffer. Would the buffer basically be a big table of position values, which are stored until they can be read into the rest of the VI?
Yes, see the example code.
However, depending on the frequency with which you need to collect data from the device you might not need this buffer at all. I.e. if you collect a sample about every 100ms then you could remove all threading and buffer related functions and instead read the data from the read function itself like this:
double CDevice::get_data()
tracker->update();
return tracker->getRawData(0);
Because you'd only need a buffer and a seperate thread if you collect data at a high frequency and you cannot lose any data.
Matt

Create a record based on From date and To Date in CRM 2015 Plugins

Hi all
in my account screen i have two date field from date and Todate and i have one child entity member when i am creating a
new account then based on from date and to date number of child record should be created
for example in account screen
if from date=2/1/2015 and
To date=31/03/2015
then number of child record should be created
in this manner
from date to date
2/1/2015 31/01/2015
01/02/2015 28/02/2015
1/03/2015 31/03/2015

Hi,
OK. It seems you want to create 3 records (custom child entity) where the first has the same From Date as the Account and goes up to the end of the month, and the other records go from there.
This logic can be implemented via a Plugin that could run on the create and update of these fields on Accounts. From the Plugin, you can set up the logic and fill the records with the necessary information.

CS6 creates tiled image when moving from LR4 and HDR Effex Pro

Just recently I've had a problem with CS6 where it creates a partial (tiled) image when "Edit In" from LR4 and when saving back to CS6 from HDR Effex Pro. THe image may have one or several retangles which may be black, white, or part of the image that's in the wrong place if that makes any sense. All software is running with current updates. I've had the software about 6 months and never incurred this problem until the last week. Help!

I've run through several scenarios and find that it's always in CS6 that I have the problem. I opened a file in all modules of Nik as well as OnOne's Perfect Photo Suite. When I go back (save) to CS6 there is always a problem. When I save in CS6 and then open up in LR the image is fine. So the file must not be corrupt, it just doesn't present it properly in CS6. The GPU driver appears to be up to date....last update was in 2011 and I've had this computer since late 2012.

Creating a stamp or brush from black and white image

Once befoe I imported a file from my genealogy file and it came in with a transparent backgrount. It is a black document with a white background. I exported it from a Family Tree Maker file. I'm not sure how I changed the background to be transparent. I was using PSE 6 then. When I pulled on into PSE 9 it keeps the white background. I have an option to export the file from Family Tree Maker I have several file options, pdf, jpg, bmp, png, or emf. I have tried all but emf. Is there a way to create the "stamp" or "brush" from the black printed portion of the image?

When you have the file opened in PSE, double-click on the background layer to convert it into a regular layer. Then you can use the Magic Wand tool to select the white area (de-select the "Contiguous" option, and use a high tolerance value of 85 or so). Hit your Delete key and you'll have a transparent background. Then save it as a PNG file, which will preserve the transparency.
Is that what you're looking for?
Ken

Troubleshooting problems with printing PDF's from Revit and Cad files

I am unable to print a readable pdf from AutoCad and Revit. Any Suggestions? I do not have problems with Microsoft or Adobe products..Just AutoCad. I have already spoken with my AutoCad dealer and they concluded it was an Adobe issue.

How was the PDF file created? With the Adobe plug-in to AutoCAD?
If you can provide some samples, we could look at the files and determine the problem. And FWIW, I doubt that your AutoCAD dealer has the competence to conclude where the problem is with a PDF file.
- Dov

File Adapter - Reading 2 files from sender and one file to receiver

All - I am looking for a best solution for reading two files from sender and generating one file to the receiver.
Here is the scenario
Sender file s - A is a master file. B is a detail file; B will have a one to many records for each record of File A.. that is the relation ship between 2 files.. I am looking for a better solution to
Example
Input:
File A will have a record like "summary1 ABC 1234"
File B will have a record like "Detailfor Summary1 CDF 8679"
Output:
File C shall have a record "consolidatedofSummary&Detail ABC 1234 8679"
1) read records of master row and detail row from these 2 files
2) do the mapping to the receiver output format which it is creating for records with some harcoded values and based on the values from master and detail rows of sender file
if I can accomblish reading sender files and do the mapping to the receiver , assume that mapping to the receiver format would not be cumbersome.
please help me...
Thanks

Hi Gopal,
Ur approach to the interface is perfect.... Go ahead.
For selecting multiple files in source use Advanced Selection for files.. and specify the directory paths and also the file name shema...
This will fetch the 2 files into the integration engine... then u map the 2 source files to one target file(2:1 mapping).
Specify accordingly the receiver side FCC and test it end to end...
If u face any prblm post here... some1 will help u out..
Babu

Re-burn a DVD from .m2v and .ac3 files

Can someone explain to me if one can re-burn a DVD from Compressor after you've created the .m2v (mpeg-2) and .AC3 (dolby audio) files?
Here is my problem. I create a DVD with Compressor and have both the .m2v and .ac3 files on my drive. I'd like to save these and not have to re-compress the original ProRes file all over again and just burn these again to another DVD in the future.
How do you do that? Do you need another program to do this?
Any help appreciated!

No. Compressor can't use the elementary streams to build a DVD.
To burn multiple DVDs, save to a disk image (Output Device = Hard Drive) and burn that from that in Disk Utility.
Russ

Make pdf files from jpeg and zip files?

how do I make a pdf file from a jpeg or zip file?

You will need Adobe Acrobat or use https://createpdf.acrobat.com/ to make a PDF from JPEG.
ZIP files need to be unzipped before converting the content to PDF.

How to call external functions without a .DLL (just using a .H and .LIB file)?

Hello everyone,
actually I'm facing little difficulties on how to get an external function getting called from within CVI (Version 2009).
I was supplied with a .H file and a .LIB file to call an external function from within my CVI project. The .H file looks like this:
void exportedFunction(double *parameter);
As far as I know, the external function was written with MS Visual C++ 6.
So I tried to statically link to the extern al function like this:
- Add the .H file and the .LIB file to the CVI project
- #include the .H file where I needed to call the external function
- do the external function call
When building I get an unresolved external function call error from CVI so this seems not to be working.
I made some searches around and got up with two possible issues. Maybe one of you can help me get a bit further and get things working.
1) The "real" function code is located in the DLL file which was not delivered to me. Or is there a way to get things done (call external functions) just with a .H and a .LIB file (without any .DLL file included)?
2) The external function does not export according to "C-Style" rules. The function signature in the .H file shows no things like
extern "C" __declspec(dllexport) void __stdcall ...
Or maybe it's a combination of both issues (missing .DLL + wrong export style of function)?
I guess I could get around the wrong export style of the function when I manage to write a wrapper around the original function that actually uses C-Style exporting. But I guess I need the .DLL file for this try as well.
Thank you for your answers.
Best regards,
Bernd
Solved!
Go to Solution.

There is no need for the dllexport stuff. There is also the option for a static library without any DLL. But the 'extern "C"' is essential, because it forces the C++ compiler, which was probably used to compile the library , to use C calling convention.
If you can't ask the provider of the library to provide a version which was compiled using C calling convention the way to go is to write a wrapper with VC++6 around that library which reexports the functions using C calling convertion. Something like
extern "C" type0 myfunc1(type1 arg1, ...) {
return func1( arg1,...);
for every function , you need to use.
BTW. "unresolved symbol" is the linker error message, you can expect if you try to link C code against a library build with C++ calling convention.

Creating a multisim compatable model from DSN and .lib files

Similar Messages

Maybe you are looking for