Creating bleed at edge of page

I have a picture on a page that I need to overlap ('Bleed") with the edge of the page so that it can be cut properly at the printers without creating a white line. Any clues?

The ability to bleed or print to the edge of the page is usually a function of the printer rather than the software you are using to create the printed material.
If your printer won't print to the edge of the page using its setting then try either setting the paper size to a custom size slightly larger than the paper you are using - e.g. create a custom paper size of 8.75" x 11.25", fill the page with your picture and print on 8.5 x 11 paper.
Or print on a smaller size of paper.
Or convert the file to a PDF and have the print shop do both the printing and the cutting.
Good luck,
Terry

Similar Messages

I have made an 8.5 x 11 flyer and want to create handbills, four to a page, with Photoshbe op or Ado

I have made an 8.5 x 11 flyer and want to create handbills, four to a page, with Photoshop or Adobe Acrobat Pro. Waht do I do?

Create a new document the size of the handbill 4-up {example if handbill is 3"X4" then the new document would be 6"X8" Plus an optional margin and bleed (don't forget to include the gutters between the handbills - The gutter is used for the opposite margin to make the white space around the individual handbill equal)}
place the original document into the new document
make sure the layers are grouped for easy moving
Drag out guides from the ruler (make sure ruler is visible) - Make the guides for each edge of the page for the margin, 2 guides between where each document should be (both rows and columns) Readjust if necessary until it looks right
Optional - Scale original document to fit the guides if necessary
Alt drag the group to the next location
Repeat 6
I can't make it any more or less detailed without see something from your screen, when in doubt post screen shots

I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

I'm creating a book format in Pages. I want the page count to be 1 on the first page of chapter one after the title page, table of contents, etc.. How do I do that?

That is not the issue.
Pages/OSX does not save files with crop marks and bleeds.
It also by default saves transparency, which is involved in a lot of Pages' better features, at a rubbishy 72 dpi resolution.
It also makes it extremely difficult to maintain mono-color like black only text, has no spot color and makes color management opaque.
It really is only meant for amateur publishing and printing to your desktop printer.
A commercial printer who is willing to use and print from Pages may have better results but at the cost of considerable micro-management which defeats the point of this "cheap" solution.
Peter

Create slideshows in edge animate

good afternoon.
i am building a website for a web design company i work for. we want to be able to showcase the websites we have built for others by having an animation on our sites website design page that rotates through screenshots of all the sites we have built and when you click on the actively displayed screenshot it takes you to the actual website seen in that screenshot.
so far the only way i know of doing this is with flash which is what we are using now.
however this means we are actively discriminating against ios users as apple don't provide flash player on ios.
so we are looking foralternatives and came across edge animate.
however i have ran into 2 problems with edge animate that i simply cannot resolve.
1. while edge animate is great at creating more complicated animations it doesnt appear to be capable of doing simple slideshows by which i mean have an image occupy the entire stage for x amount of time then switch to a different image for x amount of time. instead it treats every image as a seperate layer meaning whichever image is at the front is present the entire length of the animation which is useless for the type of project i am trying to create.
2. edge animate generates a stand alone html file for every project along with all the imae assets and javascript files which while this helps with compatibility in ensuring more browsers can watch the animation it doesnt give me any way to insert the animation into my website design page.
any ideas where i can find tutorials that will show me how to overcome these limitations?

Hey Preran,
With regards to the help you posted on the forum.
Any advice on how to incoporate the slideshow to deal with different sized images. I don't want the small ones stretched to fit the original large sized photo but rather scaled up to fit as close fit as possible. I don't mind black space in between.
Thanks,
Chaminda.
I started a thread because I missed this post the first time I was going around.
Edge Animate Slideshow (Unlimited pictures Help)

How to create a report with different page sizes

Hi,
I would like to create a report with different page sizes, it's possible to do it with diadem?
When I change the layout parameters, changes afect to all sheets...
Is there a way to change page size individually for each sheet?
Thanks in advance.
Marc

Hi Marc,
You can use the DocStart and DocEnd commands along with the PicPrint command to spool multiple print commands to the same output PDF file using the direct printer approach. This should enable you to programmatically specify the page size differently for each sheet that you add to the print job.
' Print PDF Page by Page.VBS
OPTION EXPLICIT
Dim i, Path, OldPrintName
Path = AutoActPath & "2D Stacked"
Call DataDelAll
Call DataFileLoad(Path & ".TDM")
PDFFileName = Path & " Page by Page.pdf"
IF FileExist(PDFFileName) THEN Call FileDelete(PDFFileName)
OldPrintName = PrintName
PrintName = "winspool,DIAdem PDF Export,LPT1:" ' Set to PDF printer
PDFResolution = "72 DPI" ' "2400 DPI" , "default"
PDFOptimization = TRUE
PDFFontsEmbedded = FALSE
PDFJPGCompressed = "high"
PrintOrient = "landscape" ' orient paper
Call PrintMaxScale("GRAPH") ' auto-max, see alternative margin setting variables below
PrintLeftMarg = 0.181
PrintTopMarg = 0.181
PrintWidth = 10.67
'PrintHeigth = 7 (read-only)
Call WndShow("REPORT")
Call DocStart ' Begin multi-page document/print job
FOR i = 1 TO 4
Call PicLoad(Path & ".TDR")
Call GraphSheetNGet(1)
Call GraphSheetRename(GraphSheetName, "Page " & i)
Call PicUpdate
Call PicPrint("WinPrint") ' Add a page to be printed
NEXT ' i
Call DocEnd ' End multi-page document/print job
PrintName = OldPrintName
Call ExtProgram(PDFFileName)
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Can I create a fillable form in Pages and then PDF to iWeb?

I'm a teacher and I'd like to be able to upload some PDF documents for my students to download, but would LOVE it if I could make sections of the document available for them to fill out answers, so they could, in turn, save as PDF and send back to me!
Is this possible?
I know how to get the documents into iWeb and that is working fantastic.
But I don't know how to create an area on a page that students can write in. Do I have to maybe do the whole thing in PDF Writer (never used it but have heard that it might have that capability).
THANK YOU!
--MacMeg in Neverland

treivisone wrote:
But my problem is that i want to export my Pages' page directly to iweb to put it as a podcast. I'm working for an association that wishes to make all the content on itunes...
Ummm.... I know a lot about podcasting, but to my knowledge there is not a way to "embed" a document in a podcast episode. The XML specifications do not do that. However, in the content of an "enhanced" podcast, you can link to a document which can be downloaded while "viewing" the podcast. For an example of that, see my podcast episode:
http://spot.pcc.edu/~dleighto/podcasts/psy201a/episode20080117133153-0800.m4b
If you go to about 29:30 in the podcast, and have opened the artwork/video viewer, you will see a link at the bottom of the viewer pane to download the file. That file, however, is stored separately from the podcast episode. In iWeb, you would set that file up on a downloads page. Then in the podcast episode, you specify the path to access the file. When the user clicks on the link in the viewer, it downloads the file.
Is that what you want to do?

Creating a .pdf with different page views

I'm tyring to create a .pdf with different page views. For example as the viewer goes through the .pdf some pages I would like viewed as "single page view" and others "two page view". Is this possible? I'm working with Adobe Acrobate Pro. Thanks for any suggestions.

It's possible to use the Page Open actions to trigger a view mode change but it's messy - if the user tries to override them because they prefer to zoom in, etc. then they'll get very annoyed when things keep resetting.
To create a Page Open action, open the thumbnails panel, right-click on a page, choose Page Properties, then the Actions tab. You can use the Execute a Menu Item tool to fire one of the view modes.

Can't open pages documents I created 3 days ago with Pages 5.2

get the message:
You need a newer version of Pages to open this document.
- I've just updated to the newest Pages and now I can't open documents I created 3 days ago in Pages. Please help.

You have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Previous Pages 5 versions can not open Pages 5.2 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.2 files can not be opened in previous Pages 5 versions.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 95 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Where are files downloaded to on the mac when creating a pdf from web pages?

where on the mac HD are files downloaded to when creating a pdf from web pages?
Im creating web pages from the whole site so creating a large document, so wondered where these fiels are stored on the mac so I can delete when finished as dont want to clog up the hard drive.

Look at the LiveCycle server products.

A method to create completely customized photo book page templates from scratch in Lightroom 5

I was able to successfully create completely customized Lightroom 5 page templates (including altering the number of, positions, and sizes of pictures) by making edits to the templatePages.lua file(s) in the Lightroom directory tree. I have never heard of the LUA file format before, but it is ASCII and looks somewhat like XML, so it was fairly easy to decipher. Here is a high-level description of how I did it. This applies to Lightroom 5 on Windows 7. If this doesn't make any sense to you, then don't try it - you're likely in over your head. Although my description is brief and lacking in detail, it should enable someone who is capable of handling this to figure it out with a little of careful trial and error. Do this at your own risk - if you screw-up your installation, catalog, or computer, it's your own fault. It all worked great for me.
First, open the "<lightroom 5 install directory>\Templates\Layout Templates" folder. Then navigate to the template set that contains the template you would like to use as a starting point for the new template. For example, "12x12-blurb\clean12x12". Make a back-up copy of the templatePages.lua file in case you mess something up and want to revert.
There will be a bunch of .jpg files in this directory that each contain a preview image of the layout that carries the same name as the .jpg file. Find the one that you would like to use as a starting point. Take note of the name of the file, which is probably something similar to "page_26_preview.jpg". Duplicate the file and rename it to something unique, such as "dummy_preview.jpg". It's just temporary, so it doesn't matter what name you pick, provided it is a legal file name with no spaces.
Next, open the templatePages.lua file in a text editor. I suggest using one that can automatically recognize and format ULA (such as Notepad++, which is open source and free to use). Then search the file for the unique portion of the file name you took note of earlier, such as "page_26". It will point you to a section in the LUA file that describes that particular template. Carefully copy that entire section, including a balanced number of brackets (starting with the two brackets and commas before "children" and ending with the one bracket and comma after the "title" line. Paste the copied text into the end of the file on a new line immediately following the bracket and comma after the "title" field for the last page template section (right near the end of the file). Change the "previewName" field to the name of the preview file copy that you created ("dummy_preview.jpg" for me) and the "name" field to the name of the new template you're creating ("dummy" for me, since it is just temporary). Next change at least one of the hex characters in the "pageID" field such that the new template will have a unique page identifier.
Now you can make edits to the photo and text fields included in the new section, using other templates in the template file as examples. "x" and "y" fields are coordinates (in pixels) for the bottom-left corner of the picture or text field, "height" and "width" are the width of the field in pixels. The fields should be mostly self-explanatory, but make sure that the "photoindex" fields are filled-in starting from 1 to N, where N is the number of pictures in the template, with no duplicates or gaps. They do not need to be in order. Treat the "textIndex" fields similarly for text fields. If you want to add an additional picture or text field, simply copy the section describing a picture or text field from another template and paste it, carefully, into the new template that you are creating.
Once you are done, save the file (you may get interference from Windows UAC, in which case save the file elsewhere and the move it back to the correct directory). Then open Lightroom. Create a new photobook, and choose the new template for one of the pages, remembering that the preview image will look like the JPG that you copied. Voila! If you didn't screw anything up, you should see a page based on your new template. Then right-click the page and select "Save as custom page", which will cause a fresh preview file to be created for your new template and your template to be copied to the "custom pages" section of the template menu. The new section you added to the "templatePages.lua" and the "dummy" preview file can now be deleted, since they are no longer needed. I save them so that I may simply overwrite them the next time I need to create a customized template.
Enjoy, and please share any clarifications, corrections, or enhancements to my process.

peter at knowhowpro wrote:
DHWachs wrote:
This post was great! Thank you so much. But I am hoping you know one more thing related to this. In the "transform" section of the definition (where the x/y coordinates are set along with height and width) there is an option called "angle". I was hoping that changing this value would allow me to offset the angle of the picture. However, if I put any value there other than 0 the template becomes unusable.
Do you happen to know what this option does?
I haven't looked into the files, so this is just a guess based on how some graphic applications work. It's common to think of rotating a shape as pivoting around a center point, but It's possible that the file sets a value for the rotation point not at the center. In some graphics applications, you can set a shape's pivot at any corner or in the middle of any side, of the rectangle that contains the whole shape.
So, your value may be rotating the shape around a pivot that moves the shape into some area that upsets the behavior of other shapes. Just a thought.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Peter's point is a good one. I would also assume that the "angle" property allows you to rotate an image, but I haven't tried it myself. One thing to investigate - are there any page templates included in LR that have image placeholders that are at an angle (I don't recall any, off-hand)? If so, looking at the associated .lua file could provide insight into how an angled image placeholder should be described.

How Can I Create a New Check In Page?

Hello,
I'm trying to create a new check in page using hcst or jsp but i can´t find the place to put it... or to customized it... and I don´t know where to find the files for it.
Thanks,
Rui Santos

As was already mentioned there is the rules/profiles through configuration applet, but if you want to use a custom HCSF, HCST, JSP, etc., and then add it to the menu you will need a component that makes use of the navBuilder JavaScript API.
Then you add a resource file to your component and add something like this to that resource:
          <@dynamichtml custom_finish_layout_init@>
               <$include super.custom_finish_layout_init$>
               navBuilder.addChildNodeTo
                    'ADMINISTRATION',
                    'item',
                    'id==FileStorePathFinder',
                    'label==File Store Path Finder',
                    'url==' + httpCgiPath +'?IdcService=FILE_STORE_TEST'
          <@end@>
For this example, we are actually adding a menu item to the Administration menu, but all the menus can be manipulated like htis.

How to use programmatic VO objects in creating a Tree in ADF Page.

Hi,
I have two programmatic VOs namely Plan and Model. Even though functionally there is a Master/Detail (Plan --> Model) relationship between them, we are not creating any View Link as they are programmatic VOs. Requirement is to show this master/detail data as tree in the ADF page. Any pointer on how to achieve this?
Thanks
Edited by: user766455 on Jan 3, 2012 10:34 AM

My question is not related Traversing Tree... my question is how to create Tree in the ADF page using programmatic VOs, which don't have master and details View Link.

Is there a way to create my own template on Pages for iPad?

Hi, I've searched for this topic but can't seem to find a recent thread. I need to know if there's a way of creating a new template for Pages on my iPad. Would love to use the iPad more in school but can't seem to get it to do what we want it to! If this isn't possible then can anyone suggest an App that would be more useful. Many Thanks!

This was discontinuted in CS5 howerver you could migrate that plugin to CS5. I don`t know if you can do this with CS6.
To my knowledge they only provided a revised Contact sheet II script for CS6. In my opinion a very bad idea because they should have put all efforts and resources to enhance the Output Module PDF contact sheet that has far more options.
Still not using web galleries but the goal for web gallery was also to use this in the Adobe Output Module, maybe that provides you the options you want?

How to create a new tag in page properties in the sidekick of geometrrix page

how to create a new tag in page properties in the sidekick of geometrrix pagesame as basic, advanced, blue print??

Hi prachi,
Is it tag OR Tab ? Seems like you are looking for Tab. Look at [1] & overlay to custamize per your need. Or define at your page component.
[1] /libs/foundation/components/page/dialog/items/tabs/items
Thanks,
Sham

Issue while creating a new web part page (Safeunit.aspx) within a folder located under a Document Library.

Hi, I am facing an issue while creating a new web part page (Safeunit.aspx) within a folder (Safematic Seal Support Systems) located under a Document Library (Product Information Documents).
The path I am explaining:
Going to the Document Library (Product Information Documents) --> now inside that, clicking on a folder (Wet Seal Support
Systems) --> now inside the folder clicking on another sub-folder (Safematic Seal Support Systems) --> Here I want the web page Safeunit.aspx
Issue is that when I reach to the required destination, and want to create the web page by clicking on 'Site Action' --> 'Create' --> 'Web Part Page', now while selecting the Document Library name from the drop-down list, I do use 'Product
Information Documents' since the folder is inside this library only; but that create the page directly under the 'Product Information Documents' library, not under the sub-folder (Safematic Seal
Support Systems).
FYI, it is SP2007 version.
Kindly assist in this. Thanks in advance.

I see that you have the namespaces reference in your code.
I think you have changed the NameSpace name of your code to CreateSPFolder, change the reference in all your manifest, and other files to point to the current namespace name. It should help.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if my reply helps you

Creating bleed at edge of page

Similar Messages

Maybe you are looking for