Creating document in Numbers

Hi,
I don't know if this is allowed, but is there anyone in this forum who knows Numbers '09 so well that they would set up a really easy job for me in Numbers against payment? If I say really easy, for someone with a bit of knowledge it should be a piece of cake.
Thanks

Welcome to the Apple Community.
I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
My syncs are immediate, I never get chance to see if it works in the background, sorry.

Similar Messages

How can I create a new Numbers Document through AppleScript?

How can I create a new Numbers Document through AppleScript?
I try this:
tell application "Numbers"
make new document with properties {template name:"blank"}
end tell
But don't work.
Where can I find documentation about it?
Thanks

If you try to invent your own syntax, you are starting on very wrong basis.
The required syntax is defined by the Numbers AppleScript's dictionary.
This one doesn't know what is a template.
This is why, in the link posted by badunit, I use an other scheme to create a new document.
I know that it's awful but it's the only one available at this time.
Yvan KOENIG (VALLAURIS, France) samedi 4 juin 2011 11:25:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Create document numbers of POs at the time of creating

Hi gurus,
has anybody experience with creating the document numbers of purchase orders when the POs are creating??
I can change the purchase order number when the PO is saving or booking but at the time of creating?
I tried the extensions:
M06B0003 Number range and document number
M06B0004 Number range and document number
MM06E003 Number range and document number
, but they doesnt work.
Thanks for your help.
_janosch

hi,
This can be done by creating output type.
In that output type you have to declare a program or subroutine name.
Whenever you create a PO that output type will trigger,so the program also trigger.
In that program you have to write code for creating document number.
If its triggered PO document will be created.
Thanks,
vijay

Why iCloud only allows store documents created by Pages, Numbers or Key Note ? How can I "iCloud" documents created with Word Mac or Excel mac??

Why iCloud only allows store documents created by Pages, Numbers or Key Note ? How can I "iCloud" documents created with Word Mac or Excel mac??

Oscar66 wrote:
Why iCloud only allows store documents created by Pages, Numbers or Key Note ? How can I "iCloud" documents created with Word Mac or Excel mac??
iwork for ios accepts for upload and also happily opens all your Microsoft office files, from Office97 standard doc/xls/ppt to the 2011 versions of docx,xlsx,pptx and various other of these format extensions.
Notice : the upload feature in www.icloud.com is only active if you in fact own these apps on your iPhone/Pad/pod. it is not a feature of iWork for the Mac ( iwork09 ) which itself is not icloud capable at all.

How can I exchange my pc created documents on Excel, Word, and PowerPoint with my mac and my Pages, Numbers and Keynote created content with my pc? I need to create and edit between both.

How can I exchange my pc created documents on Excel, Word, and PowerPoint with my mac and my Pages, Numbers and Keynote created content with my pc? I need to create and edit and exchange between both types of operating systems.

Your Windows system will not open any Pages, Numbers or Keynote documents. No applications exist for Windows that can open those formats. You will need to export your documents in Word, Excel and PowerPoint formats, respectively, before you'll be able to view and edit the documents on your Windows system. The iWork documents can natively open Word, Excel and PP documents, though there are limitations on what can be imported (for instance, Numbers does not support all possible Excel functions). Consult the documentation for the relevant iWork application for details on importing and exporting.
If you are asking how to get the documents from one system to the other, then there are several ways to do that, including file sharing, using an external drive (hard drive, USB flash drive), or emailing the documents to yourself. Which would be best for your situation I can't say without more details about your usage.
Regarsd.

The document "navidad.numbers" could not be opened.

I created a document during december, and now I can't open it. It's really important, I need help here.
I doesn't gives me any explanation only the pop up saying: The document “navidad.numbers” could not be opened.
Message was edited by: jaimemtz

jaimemtz:
This might not help you at this point, but maybe if someone else comes along later, it will help them solve their problem.
I just had this exact same problem and from the looks of your document title, my fix might work for yours as well. I fixed the file by editing the index.xml file in the corrupted numbers file. Numbers '09 doesn't save documents as folders by default anymore, but you should be able to unzip them to folders using something like Unarchiver, 7zip, or a similar program (I used my default archive extraction program, which is called "The Unarchiver"). My problem was that I had put an obscure unicode character in the name of one of my tables. Look at the console output in Console.app and see if something similar doesn't show up. I just went into the text file, changed the offending characters to something from ASCII, and renamed the (unzipped) folder to have the .numbers extension, and the file openned without any issues.
Anyway, like I said, probably won't help at this point, but maybe it will help someone else later.
David

Documents in Numbers all gone after restore my iPhone

I am using Numbers on my iPhone running iOS 5 for sometime, and Documents in the Cloud syncing is working fine all these while. But since I restored my iPhone, all documents in Numbers are all missing and the app won't sync the documents back to Numbers on my iPhone. When I try to logon to iCloud.com I can see the documents still in the Cloud. I even try to delete and reinstall numbers but the the documents just won't sync back to my iPhone. I have created a new document on Numbers, and the document just show a upload arrow sign without further action. Has anyone encounter the similar problem?

But since I restored my iPhone, all documents in Numbers are all missing
On the iPhone tap Settings > iCloud
Make sure Documents & Data is switched on.

Create document number range 22 using internal number assignment

Hi friends,
now i am working upgradation project from 4.7 to 6.0. sandbox i created one Asset, After that i posed amount to that asset by using f-90.now i run depreceation in ABAF T code the bellow issue is comming
Create document number range 22 using internal number assignment
     Message no. AA776
Diagnosis
     Processing terminated because the document number range 22 for year 2011
     was set up with external number assignment.
System Response
     For periodic posting of depreciation, you have to create a document
     number range with internal number assignment, since the document numbers
     are assigned from Financial Accounting.
Procedure
     Change the number assignment for the number range 22 from external to
     internal in Customizing for Asset Accounting. See SAP Note 890976 for
     more information.
But no ranges for that particular year having, if any changing that one it s not come edit or deleating
ple any one help me
Regards
Gangadhar reddy

Hi Gangadhar,
after 4.6C the Internal Number Range was changed into external Number Range due to technical requirements.
As the error messages due to posting manual into the affected number ranges could not be hindered in this case with ERP2005 the desicion was made to rechange to internal number range. Note 890976 describe what to do here.
regards Bernhard

Create document number range 03 using internal number assignment in AFAB

Hi Experts,
Where i have to create number range to Depreciation Posting ? Please mentain Transaction code .
I had check T Code:AS08 (No Tick is assign) & FBN1 (Intrenal Tick is assign)
I am doing T Code AFAB
Folowing error coming
Create document number range 03 using internal number assignment
Message no. AA776
Diagnosis
Processing terminated because the document number range 03 for year 2011 was set up with external number assignment.
System Response
For periodic posting of depreciation, you have to create a document number range with internal number assignment, since the document numbers are assigned from Financial Accounting.
Procedure
Change the number assignment for the number range 03 from external to internal in Customizing for Asset Accounting. See SAP Note 890976 for more information.
Waiting for reply
Regards,
Girish

locked. please read the error message and search the IMG (very easy).

AFAB:AA776 "Create document number range ## using internal number assignmen

Good afternoon
I ask for your guidance to see if anyone knows me that is generating errors in the transaction AFAB AA776 "Create document number range ## using internal number assignment", the peculiarity of this is that I'm in an environment that is proving to migrate V5 to V6 ranges in environment QAS is marked as external and no problems to run on v6 change in SAP itself. Test by removing the flag marking for external control and run, causing an alarm is that it does not work as in my QAS v 5 and that I should remove this flag is removed and remove it in all the years this range of numbers is that it can hurt if you make this change.
Can anyone guide me please.
Thanks for the support.
good day

Hello ,
Kindly have a look at the below notes that will help you resolve the
issue :
890976 - Converting closing report to internal doc number assgnmnt
If note 890976 has been applied in your system already (package
level is = or > SAPKH60005), so what you need to check is the
following :
In transaction FBN1, in your company code you should see that the
period and number range in question is ticked as external.
Please untick the indicator for "External" and press enter. If this
box happens to be uneditable then untick the number range for the
previous year and press enter. All other entries will update
automatically.
Here is a brief explaination to why this change has been made:
Before ERP2005(RAPOST2000 exists as of release 4.70)the number usage
was external, because RAPOST2000 internally managed the document number
handling. As this was not possible any more with the New General Ledger
functionality, and as the usage of internal number ranges is much
simpler and more efficient, we changed the number range management
inside RAPOST2000 (and by the way also the new periodic posting report
RAPERB2000).
Please kindly check the attached notes 683313 for your reference.
I hope this provides some clarification.
regards
Ray

Why is it that, "The document "Untitled.numbers" could not be saved." ?

The new version of TextEdit (Version 1.7 (289.3)) can save files to our server shared folder (mini server, raid 1 array, 10.7.3) and save changes, Numbers can only save them the first time. After that
The document “Untitled.numbers” could not be saved.
Console errors like
4/5/12 12:31:53.096 AM [0x0-0x46e46e].com.apple.iWork.Numbers: [ERROR] genstore_client_managed.c:GSClientManagedStorageCreate:299 Path "/Users/Me/Library/Autosave Information/85144DE8-E041-4514-BADE-FA63ED0FA3AF.genstore.noindex" passed to GSLibraryCreateClientManaged does not exist or is not a directory.
4/5/12 12:31:53.096 AM Numbers: NSDocument could not create temporary version storage at file://localhost/Users/Me/Library/Autosave%20Information/85144DE8-E041-4514-BAD E-FA63ED0FA3AF.genstore.noindex. Here's the error:
Error Domain=GSLibraryErrorDomain Code=2 "The operation couldn’t be completed. (GSLibraryErrorDomain error 2 - The supplied path does not exist.)" UserInfo=0x3397cb0 {NSDescription=The supplied path does not exist.}
4/5/12 12:31:53.096 AM Numbers: NSFileVersion couldn't find the library for a file. URL: file://localhost/Volumes/Creek/Banking/Taxes/Taxes%202011/Untitled.numbers
Tried
Finder > (menu) Go > Go to Folder..., enter /Users/Me/Library/Autosave%20Information, got access denied
Finder > (menu) Go > Go to Folder..., enter /Users/Me/Library and select the Autosave Information folder (denied flagged folder) and add myself to the permissions list with Get Info, click lock, password, +, Me from Users and Groups, Select, and...
Now save works, but wait for much disk grinding
This computer went from 10.6.8 and jumped to 10.7.3 and I had to split the RAID 1 array it started on to get the installation to restart and complete. Hints from the installer that some features would not be available (autorecover drive) didn't hit it would leave a folder crucial to operation of Apple's own software inaccessible.
The path does exist, Panda.
Why was that folder not accessible except to system? and hidden in the normally hidden /Users/X/Library for fun? with a nearly useless error?

As far as I know, the AutoSave feature as it is treated by iWork apps is unable to work on networks.
You must work on the local machine then copy the document to the network.
I guess that this annoying feature will strike until the delivery of the lond waited major upgrade.
Yvan KOENIG (VALLAURIS, France) jeudi 5 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

I just updated my OS to Mavericks, as well as my Pages app. Now my previously created documents print out as blank paper, even tho I can see the text on my desktop.The margins have also been altered. How do I fix this?

I just updated to Mavericks, then updated my Pages App. Now none of my previously created documents print out, except as blank pages, even though I can see the text on the documents, but with altered margins, on my computer screen. How do I fix this so the documents print out normally again?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Creating documents and spreadsheets

Is there a way to create documents and spreadsheets on MacBook Pro without downloading something like Open Office?

You can use the built-in TextEdit for creating "simple" text documents but for spreadsheets there is no such app.
The free OpenOffice; LibreOffice or NeoOffice or the commercial Apples Pages and Numbers or Microsoft Office for Mac are the ways to go.
Stefan

Document page numbers in pages palette?

I just jumped from CS to CS5. I work in magazine spreads most of the time and would like the pages palette to reflect my document page numbering. All I can get it to show is 1, 2, 3, etc. with 1 starting on the LEFT page of the thumbnail spread, whereas the my document spreads always start on EVEN-numbered (left) pages. I have no trouble numbering the document itself any way I want, it's just the palette. Was not a problem in CS, it always showed my document page numbers below the thumbs. Is there a menu setting I am not finding?

Can you post a screen capture of your Pages Panel (they officially became panels instead of palettes in CS4, or maybe CS3)? Use the little camera icon on the web screen to embed it in your post.
The only things that's changed significantly about the Pages Panel/Palette is the addition of page thumbnails, so if you aren't seeing page numbers that match the numbers assigned (if you are viewing section numbering rather than absolute numbering -- a preference choice), then there is something wrong with the program. The first step with oddities like this is to Replace Your Preferences

How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents. Any ideas?

How can I re-arrange the pages in a Pages document now?? I used to be able to click on the thumbnails and shift their position which is important in creating documents. Any ideas?

This feature has been removed from Pages 5 along with over 90 others:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Pages '09 is still in your Applications/iWork folder.
Trash/archive Pages 5 and rate/review it in the App Store.
Peter

Creating document in Numbers

Similar Messages

Maybe you are looking for