Creating Function Group

Hi,
I tried to create a new function group in transaction SE37 or SE80 but it asks for OSS Access Key. I prefixed the Function Group Name with Y but still its asking for OSS verification.

I am currently doing a POC on enhancing the extract structure of a datasource, so instead of modifying the standard content, i thought copying all the objects like the data source, function module, function group etc and start from there. It allowed to copy the data source, this data source is refering to a extract structure and function module, when i tried to create a function group it was prompting for a OSS account access key,
Also please help me how can create a new extract structure that is same the existing one.

Similar Messages

How to create function group in Maintainence view

Hi,
For creating a maintainence view of a particular table (only1) what is the need of a function group. How can i create a function group like what type of includes, etc are present in the function group,etc.
Thanks,
Arnab

in the table maintenance view
just enter the function group name any(Z* )
and give the screen name (single or over view Scree)
It will automatically creates the function group which ever you specified.
now the function group contains
the screen, TOp include ...
Thanks
Sekhar.

Regarding how to create function group.

Hello experts:
      First Thank you in advance for all your replies.
      I want to create a RFC funtion, but don't know how create a function group of mine, would you please give a hand?
      couldn't thank you more.
      Best regards.
      Frank

Hi,
goto se37
goto->function groups->create
Regards,
V.Balaji
Reward if Usefull...

Time_out dump when creating function group

Creating a function group via SE80 in BI system generates a dump when trying to create a transport request as local object. Below is the error in the dump:
Termination occurred in the ABAP program "SAPMS38L" - in
"ED_GENERATE_MAIN_PROGRAM".
The main program was "SAPMSEU0 ".
In the source code you have the termination point in line 1910
of the (Include) program "MS38LFED".
Any ideas?

Hi, Akhil, the rfc call is of course not run in foreground, but in dialog work process. Thats the same work process type, that performs requests of dialog users. Even though it does not sound much logically in first look, it has a logic. Also other limits for dialog users will apply.
If you have to run the FM through RFC, there is no way how to bypass the dialog work process runtime limit on destination system, it will just apply, in my opinion I would recommend you don't loose your time to work around this point. afaik it does not matter if you start it synchronously or asynchronously.
But as I wrote, you can try to throw a commit work in destination system occasionally, if you can (e.g. if you are not blocked in one big select query), you can also increase the runtime limit (but for all users on the same instance). You can redesign your application...
If you will study the dump, you will find that it occurred on the destination (accounting) system, not in the calling system - where you are really ok since you run in background work process.
Also, during the active RFC call you can monitor the destination system with SM66, where you will see this running process in DIA work process with the time increasing, before it will fail.
On the other hand if you will start SM66 on caller system, you will see the work process is BTC

Creating Function group or package.

What is the impact while creating below inputs function group or Package.
Appl. component
Software Component
Transport Layer .
Suppose "profit center data maintenance redesign and/or Dynamic Data storage"
what can I give for
Appl. component
Software Component
Transport Layer .
Thanks in advance.

Hi Sam,
You can find SAP documentation for Application, Software Component and Transport Layer. They are as follows:
Application component ID
Name used to identify the application component
Software Component
The software component describes a set of objects that are always delivered together. A software component is released in succcessive versions with new functions. You can provide each component separately with Support Packages.
Objects are assigned to a software component by assigning the packages of the object. This enables objects from one software component to move to another software component when you switch to a new release.
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport layer.
The transport layer determines whether objects are assigned to a local or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System and transport layer.
When you create a package, it is assigned the standard transport layer of the SAP System.
If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Regards
Anil Madhavan

Error in creating function group

Hi
In my z function group, do i need to declare all the parameters used in function modules explicitly in any top include?.it was not declared as such in the standard function group from which i copied .

Hello ,
Sometimes when u copy any standard function group into ZFuntion group u will get some systax errors saynig some varaible is not defined .
then
goto SE37
Enter the fucntion module and get into function bulinder
select EDIT Menu option and Interface Submenu option inthat u will find GLOBALIZE PARAMETERS and LOCALIZE PARAMETERS Just do that operation u will be free of errors.
regards

How to create a function group (step by step)?

I would like to know how to create a function group, step by step.
step 1 do....
step 2 do ...

also,
Go to SE80 for creating a function group.
Also have a look at below link.
http://help.sap.com/saphelp_nw04/helpdata/en/d1/801ef5454211d189710000e8322d00/frameset.htm
i.e.
TCODE - SE80
Choose - Function Group ,it wil ask to create..
Create and then activate..give a name starting with Z .
Other way is go to tcode SE37.
In the menu,there is a option in sub menu for creating function group.
Just create it by clicking that and give names starting with z or y.

How to create function module for getting customer name

Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R

1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna

Function Groups and Function Modules

Hi,
Can anyone give me the detail steps for creating Function Group and then from that function group creation of function module with example?
Regards,
Chandru

Hi,
Function Group creation -
 A function group is a program that contains function modules. With each R/3 system, SAP supplies more than 5,000 pre-existing function groups.
 In total, they contain more than 30,000 function modules. If the functionality you require is not already covered by these SAP-supplied function modules, you can also create your own function groups and function modules.
 We can put all the relevant function modules under one function group and all the global variables can be declared in this FG.
FG Creation:
1) Function group can be created in SE80. There choose the 'Function Group' from the list of objects.
2) Then give a name for ur function group (starts with Y or Z) and press ENTER.
3) The click 'YES' in the create object dialog box and give a short desc. for this FG and save.
Function Module:
 A function module is the last of the four main ABAP/4 modularization units. It is very similar to an external subroutine in these ways:
Both exist within an external program.
Both enable parameters to be passed and returned.
Parameters can be passed by value, by value and result, or by reference.
The major differences between function modules and external subroutines are the following:
Function modules have a special screen used for defining parameters-parameters are not defined via ABAP/4 statements.
tables work areas are not shared between the function module and the calling program.
Different syntax is used to call a function module than to call a subroutine.
Leaving a function module is accomplished via the raise statement instead of check, exit, or stop.
A function module name has a practical minimum length of three characters and a maximum length of 30 characters. Customer function modules must begin with Y_ or Z_. The name of each function module is unique within the entire R/3 system.
Defining Data within a Function Module
Data definitions within function modules are similar to those of subroutines.
Within a function module, use the data statement to define local variables that are reinitialized each time the function module is called. Use the statics statement to define local variables that are allocated the first time the function module is called. The value of a static variable is remembered between calls.
Define parameters within the function module interface to create local definitions of variables that are passed into the function module and returned from it (see the next section).
You cannot use the local statement within a function module. Instead, globalized interface parameters serve the same purpose. See the following section on defining global data to learn about local and global interface parameters.
Defining the Function Module Interface
To pass parameters to a function module, you must define a function module interface. The function module interface is the description of the parameters that are passed to and received from the function module. It is also simply known as the interface. In the remainder of this chapter, I will refer to the function module interface simply as the interface.
To define parameters, you must go to one of two parameter definition screens:
1) Import/Export Parameter Interface
2) Table Parameters/Exceptions Interface
Then in the FM interface screen, give the following
1) Import parameters
2) Export parameters
3) Changing parameters
Then give
1) Define internal table parameters
2) Document exceptions
You enter the name of the parameter in the first column and the attributes of the parameter in the remaining columns. Enter one parameter per row.
Import parameters are variables or field strings that contain values passed into the function module from the calling program. These values originate outside of the function module and they are imported into it.
Export parameters are variables or field strings that contain values returned from the function module. These values originate within the function module and they are exported out of it.
Changing parameters are variables or field strings that contain values that are passed into the function module, changed by the code within the function module, and then returned. These values originate outside the function module. They are passed into it, changed, and passed back.
Table parameters are internal tables that are passed to the function module, changed within it, and returned. The internal tables must be defined in the calling program.
An exception is a name for an error that occurs within a function module. Exceptions are described in detail in the following section.
Syntax for the call function Statement
The following is the syntax for the call function statement.
call function 'F'
 [exporting p1 = v1 ... ]
 [importing p2 = v2 ... ]
 [changing p3 = v3 ... ]
 [tables p4 = it ... ]
 [exceptions x1 = n [others = n]].
where:
F is the function module name.
p1 through p4 are parameter names defined in the function module interface.
v1 through v3 are variable or field string names defined within the calling program.
it is an internal table defined within the calling program.
n is any integer literal; n cannot be a variable.
x1 is an exception name raised within the function module.
The following points apply:
All additions are optional.
call function is a single statement. Do not place periods or commas after parameters or exception names.
The function module name must be coded in uppercase. If it is coded in lowercase, the function will not be found and a short dump will result.
Use the call function statement to transfer control to a function module and specify parameters. Figure 19.9 illustrates how parameters are passed to and received from the function module.
sample FM
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = ' '
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT =
IT_FIELDCAT =
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
 t_outtab =
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Example
1 report ztx1905.
2 parameters: op1 type i default 2, "operand 1
3 op2 type i default 3. "operand 2
4 data rslt type p decimals 2. "result
5
6 call function 'Z_TX_DIV'
7 exporting
8 p1 = op1
9 p2 = op2
10 importing
11 p3 = rslt.
12
13 write: / op1, '/', op2, '=', rslt.
Regards,
Shanthi.P
Reward points if useful ****
Edited by: shanthi ps on Jan 26, 2008 12:03 PM

Creating function modules with step by step

Hi,
plz provide me the material for creating function modules with step by step.

Hi Nagaraju,
Step 1.
GO to transaction SE80.In the drop box list select function group enter your Z Function group name.Press enter it will ask for creating the function group.Create your function group.
OR
In SE37 transaction,in the menu bar Goto - > Function Group - > Create Group.Your Function Group will be created.
Step 2.
Go to transaction SE37.Enter your Z Function module name,your recently created function group name and the description.Press Enter.Now your FM is created.
Step 3.
Enter Export,Import parameters.In the source code tab write the code what you want to write.If any exception write in the exception tab.
Method 2)
First u have to create Function Group.
1.se37->Goto->Function Group--->Create.
2.Create FM.
3.maintain import /export parameters and tables , exceptions.
4.based on the ur requirement u have to bulid ur logic in Source Code by using there Import parameters and u can pass the results by using Export or table.
5.u can raise error by using exception.
Reward if useful.
Thanks
Aneesh.

Is there a way to create a group function?

I want to create a group function like max,sum,count for a
pl/sgl function. This group function will be something like max
(let's call it max2) but it will return the second highest value
of a group.
Any ideas anyone?

Since you might not completely understand what i mean i give you
this example:
the ranktest table is:
A     B     C
a     b     1
a     b     1
a     b     5
a     b     12
a     b     7
b     c     1
b     c     3
b     c     2
b     c     4
b     c     8
c     d     4
c     d     3
c     d     6
c     d     1
c     d     2
c     d     12
c     d     7
c     d     3
a     b     5
c     d     12
SELECT A,B,C
FROM (
SELECT A,B,C, dense_rank() over (
PARTITION BY A,B
ORDER BY C desc) AS sorted_c
FROM ranktest a)
WHERE sorted_c = 2
-- this way we get the c column to have the 2nd highest value
-- for each set of A and B
--RESULT
a b 7
b c 4
c d 7
SELECT a.A,a.B, sum(a.C), count(a.C)
FROM ranktest a
GROUP BY a.A,a.B
-- this way we get the group functions to work on two of the
-- columns
--RESULT
a b 31 6
b c 18 5
c d 50 9
The result that i want is
a b 31 6 7
b c 18 5 4
c d 50 9 7
My question is can this be done in a single select statement. I
know it can be done with an intermediate step (of the creation
of a temp table).
Plus i would like to ask the experts, would a single select
statement be more efficient?
NOTE: the tables and data are just test data. The real tables
and data and the select query are different. The real ranktable
has about 1 million records. That's why i am worried about
efficiency.

Can't use function in creating record group

Gurus,
This question is for developers. Is this true one can't use
function in creating record group. I am using form5.
thanks,
ZW

I figured out the issue... they changed the way Group Calls are limited.
Here's a full explaination - and a suggestion for a behavior fix: http://community.skype.com/t5/Windows-desktop-client/Please-Fix-Group-Video-Voice-Calling-Limit-Beha...
Long story short, you can't do a video calling at all if the group has more than 10 people in it total (including you).
Also, you can't do voice calling in groups with more than 25 people.
Text chats are limited to 300 people (or so I've been told by Skype employees). I've been in a chat with over 100 participants though so I know it goes that high at least.

How to create a transaction code for a function group with screen 100 as st

Hello ,
I have requirement where I need to create a function group and create screen 100, 200, 300 and include the function in the screens.
Customer asked me to create a transaction with the screen 100 as the starting screen.
Can you please let me know how to create a transaction code for a function group with screen 100 as starting screen.
[ It is not a module pool program ].
Thanks
Prashanth.
Moderator message - Please ask a specific question and do not ask the forum to do your work for you - post locked
Edited by: Rob Burbank on Jun 2, 2009 11:49 AM

Go to transaction SE93, enter a transaction code that you want and click on "create". Enter a text and select the "Transaction with Parameters" button. In the Default Values section, enter START_REPORT in the transaction field. Check the "skip initial screen" box. In the Name of Screen field section enter the following lines:
Name of screen field:                               Value
D_SREPOVARI-REPORTTYPE                RW
D_SREPOVARI-REPORT                        ZPCA
Save and transport accordingly.

How to create a grouping function

How to create a grouping function ?? For example, can I create a function:myavg and I can use it like :
select col_a, col_b, myavg(col_c)
from table_a
group by col_a, col_b
Thanks in advance !!
null

I don't think that you can create a grouping function in Oracle, but you can create a function and use it in Select statments.
null

How to create a new request for function group?

Hi Friends,
My client has changed their development server. Now all the objects in old DEV server are transfered to new one. Except for function group objects, we have created new change request number for all others. Now I need to create a new request for function group objects. Can anyone suggest which transaction code I have to use for this purpose?
Thanks,
Kaarthick.V

Hi Karthick,
If you want to Change the request for your FG means,
1. Go to SE80 -> work bench -> Edit object.
Here you have the option two change the request.
or If you want to create the Function Group means,
Go to SE80 -> Select Function Group -> Enter name -> press Enter
Thanks,
Reward If Helpful.

Creating Function Group

Similar Messages

Maybe you are looking for