Creating group and setting owner
Hello,
When I am trying to create a group, FIM is picking up the my account (in which I am logged in) and setting that as the owner of a group unless I manually delete that and put another user as the owner. Can we change the settings somewhere
so that it doesn't take the default logged in account?
Please let me know, Any help will be much appreciated.
Thanks.
Hello,
as far as I know that functionality his some code behind which can not be changed.
But you can Trigger a workflow to clear the owner attribute on group creation.
Keep in mind that reference values can only be cleared by setting a " " (space) to the attribute by using the function evaluator.
Regards
Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com
Similar Messages
-
So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
ThanksBut, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com -
Grouping and setting attributes by group in data modeler
Hi,
I wanted the enhancement to hide foreign keys but until that comes I was thinking I could simply set all the foreign key I want not visible to a colour of white, which worked quite well.
For the tables that are basically System such as Language Codes - I defined a Classification Type of System and set them to an identifiable colour to show they are connected but the connections will not be visible on the diagram.
Then I tried to do the same for the Foreign keys but there is no way of setting a standard colour which can be changed.
So I had to set each one to white, which is a pain but then I have white marks across my diagram which I may be able to live
with. In most diagrammer mappers they have a send to back which would solve this - please???
But then I come to the problem that I can't then see them to change them back as they are white ;)
Is there any grouping mechanism that I can group together foreign keys so I can put in this temporary fix?
So I guess I'm on
1. Classification for Foreign Keys - any way to do this?
2. Grouping and Sending groups to the front or back of the diagram.
Thanks,
p.Hi,
you can use dynamic properties to build your own functionality - there is dynamic properties page for each object. you can create them using UI and use them in scripting.
the following script uses dynamic property "cl_type" and check for value "t2"
fkeys = model.getFKIndexAssociationSet().toArray();
//create color using integer
color = new java.awt.Color(16724838);
for (var i = 0; i < fkeys.length; i++) {
fk = fkeys;
cl_type = fk.getProperty("cl_type");
if(cl_type!=null){
if(cl_type.indexOf("t2")==0){
fk.setUseDefaultColor(false);
fk.setBackgroundColor(color);
fk.resetEdgeParams();
}else{
// set for other types or reset to default
fk.setUseDefaultColor(true);
fk.setBackgroundColor(null);
fk.resetEdgeParams();
you need to transform RGB color to integer - I found calculator here http://www.shodor.org/stella2java/rgbint.html
Philip -
Help creating apple script to create folder and set access levels
I'm trying to create folders in FileMaker Pro using apple script and need some help in setting the access level for the folders. I want to set both Staff and everyone to Read and Write access. Secondly I would like to have a function key set on the desktop to create new folders and set that same access level. The default access is Read and I can not find a way to change that.
ThanksI'm trying to create folders in FileMaker Pro using apple script and need some help in setting the access level for the folders. I want to set both Staff and everyone to Read and Write access. Secondly I would like to have a function key set on the desktop to create new folders and set that same access level. The default access is Read and I can not find a way to change that.
Thanks -
How to create groups and assign users thru program
Hi,
I am planning to create groups by program and assign users to them based on some condition.Once users are assigned to those groups we need to change the Language value for those users in User profile
We are using Central User Administration.
Please let me know the solution
Thanks
Bala Duvvuriprobably you can use this code to create a group
IGroupFactory groupFact = UMFactory.getGroupFactory();
IGroup group = groupFact.newGroup(wdContext.currentContextElement().getGroup());
group.commit();
for this required com.sap.security.api.jar -
How to create Groups and Group Leaders in Clusters.
Hi,
As we know in unicast there is one to one communication and there are groups to control the Thread
Management, How the Groups and the Group Leaders are created.
Regards,
Vardhan.Unicast clustering uses TCP/IP sockets to pass cluster messages between members. To avoid requiring each cluster member
to have connectivity to every other cluster member, WebLogic Server uses a group leader strategy whereby the oldest member
of the group (in other words, the server that was started first) is designated the group leader. All members of the cluster
connect to the group leader so that the group leader acts as the relay point for cluster messages between members.
If the group leader goes down, the next oldest member becomes the new group leader.
As you can imagine, the group leader strategy works well for small groups but becomes less efficient as the number of members
of the group grows large. As such, WebLogic Server uses a multiple group leader strategy where it limits the number of members
in a group to 10. If the cluster is larger than 10 members, WebLogic Server splits into two or more groups, each with their own
group leader. The group leaders themselves are all interconnected to minimize the number of hops that a cluster message must
traverse to reach all cluster members. -
How to Create groups and targets....
Hi guys,
Here is a chance of getting some easy points
I know that it may seem a dumb question but I can't find out how to create a transport group and a transport target....
I've read help.sap and some other threads related to the subject but all I was able to get was:
help.SAP.com
"Procedure
Defining Groups of Business Systems
Define groups of business systems for different areas of use (for example, testing and production) and assign an Integration Server to each group.
1. On the initial screen of the SLD, choose Business Landscape.
2. From the dropdown list box for the input field Groups, choose Edit Groups . "
Well I can't find where is the dropdown list....:S
I'm using SP10 and all I have in the SLD are 3 options:
1.Technical Systems
View and Define Systems and Servers
2. Landscapes
View and Configure Groups of Systems
3. Business Systems
View and Configure Business Systems for Use in Exchange Infrastructure (XI)
If I choose "Landscapes", the only thing I'm able to do is to create a landscape from a specific type (Adminitration, General, Transports, NWDI systems, etc....)
If I create a landscape with the type 'Transports" and then associate a technical System, I thought that in my Business System I would be able to choose this lanscape....
But The only thing I have is group and transport target and they're completely empty, showing "No additional groups available" and "No targets"...
Can anyone help me and get some easy rewarding points?Hi Chirag,
I've read the following link, but the question is....
- Where is the link to create transport groups? That is my only question It's as easy as that
Found it...sorry I knew it was easy
Edited by: Gonçalo Mouro Vaz on Dec 20, 2007 5:13 PM -
ICR 002 - Object Groups and Sets
Hi,
Tcode here is FBCR009.
I need one help on the PROCESS 002 for ICR. In the current system, we have implemented the Object groups and Sub groups as mentioned below:
Object Group - 100
Object Subgroup 100
Object group Sequence Company Field Company Set Description Partner Field Partner Set description
100 1 RACCT RULE2A B/S Cash Management RACCT RULE2B B/S Cash Management
100 2 RACCT RULE3A B/S ST Interest Bearing RACCT RULE3B B/S ST Interest Bearing
100 3 RACCT RULE4A B/S ST Non-Interest Bearing RACCT RULE4B B/S ST Non-Interest Bearing
100 4 RACCT RULE5A B/S ST Non-Interest Bearing Derivatives RACCT RULE5B B/S ST Non-Interest Bearing Derivatives
100 6 RACCT RULE7A P&L LT Interest RACCT RULE7B P&L LT Interest
100 7 RACCT RULE8A P&L ST Interest RACCT RULE8B P&L ST Interest
100 8 RACCT RULE9A P&L Toll RACCT RULE9B P&L Toll
100 9 RACCT RULE10A P&L Royalties RACCT RULE10B P&L Royalties
100 10 RACCT RULE11A P&L Rent RACCT RULE11B P&L Rent
100 11 RACCT RULE12A P&L Brokerage Commission RACCT RULE12B P&L Brokerage Commission
100 12 RACCT RULE13A P&L Warehousing RACCT RULE13B P&L Warehousing
100 13 RACCT RULE14A P&L Misc/Other RACCT RULE14B P&L Misc/Other
100 14 RACCT RULE15A P&L Insurance RACCT RULE15B P&L Insurance
100 15 RACCT RULE16A B/S LT RACCT RULE16B B/S LT
I am a little confused here. The following sets under the sub-group has a logical u201CANDu201D . the customer corporate reporting group would like to see the Config to allow each group of accounts defined as ruleXa reconciled to group of accts defined as ruleXb, e.g.
Rule 2A with Rule 2B
Rule 3A with Rule 3B etc
Each Company set should only reconcile with the partner set.
looked at this OSS Note 1499183 - ICR: Documents are not assigned to the object groups & got even more confused.
Request if you can advice here.
Regarzds
AahishHello Johannes,
Unfortunately what you are trying to do is not possible.
Object groups are defined using the information in the totals table. Therefore fields only available in the line item table cannot be used when setting up object groups. Unfortunately it is also not possible to set up status fields on the totals level because of the standard update process of those fields when setting a status (the line item table is modified directly, there is no totals update). Depending on the details of your setup you might be able to simply add a "normal" field on the totals level and then fill it via BADI. This would probably work quite well if the field does not have to be set manually - and in this case you do not really need the functionality of setting a status manually either.
I hope this helps you in your efforts!
Ralph -
Create Parameter and set Parameter properties using API
I want to create a parameter with RAS API.
Here I want to create a string parameter and initialize it and set the values.
This is the code I use to create a parameter.
I use here the RAS API, because I want to create a parameter
Dim myParameterField As New CrystalDecisions.ReportAppServer.DataDefModel.ParameterField
myParameterField.ParameterType = CrParameterFieldTypeEnum.crParameterFieldTypeReportParameter
myParameterField.ValueRangeKind = CrParameterValueRangeKindEnum.crParameterValueRangeKindDiscrete
myParameterField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField
myParameterField.Name = "mystring"
m_RasDoc.DataDefController.ParameterFieldController.Add(myParameterField)
later, I call the following code to set the values of the parameter "mystring".
I use DOTNET-SDK, because I dont know how to do this with the RAS API
Dim crParameterDiscreteValue As ParameterDiscreteValue
Dim crParameterFieldDefinitions As ParameterFieldDefinitions
Dim crParameterFieldLocation As ParameterFieldDefinition
Dim crParameterValues As ParameterValues
crParameterFieldDefinitions = m_crNetDoc.DataDefinition.ParameterFields
crParameterFieldLocation = crParameterFieldDefinitions.Item("mystring")
crParameterValues = crParameterFieldLocation.CurrentValues
crParameterDiscreteValue = New CrystalDecisions.Shared.ParameterDiscreteValue
crParameterDiscreteValue.Value = "myvalue"
crParameterValues.Add(crParameterDiscreteValue)
crParameterFieldLocation.ApplyCurrentValues(crParameterValues)
crParameterFieldLocation.ApplyDefaultValues(crParameterValues)
crParameterFieldLocation.IsOptionalPrompt = False
later, I save this report to disk.
When I open the generated report in the Crystal Designer, there are no default values for this created parameter 'mystring'.
Is it possible to set DefaultValues using RAS API?
Can I populate the combobox for a parameter in parameter Dialog? Can I set the standard value field?
Thank you
OttoHello,
at first i want to create a new parameter. Then set the parameter value in the parameterlist and store a standard default value.
I want if this stored report will be opened with the Crystal Reports Designer and I start with the view button, the default values should be set in the parameter text field, so that the user must not type in the parameter values.
Please help me!
Thank to all helpers. -
Creating Items and setting the properties programtically
Hi ,
Can any one provide me some details of how to create item programatically and setting its properties.
Ex: I have to create a message choice
set its id, picklist view definition ,picklist display attribute, picklist value attribute, prompt, action type and event
Regards,
KrishnaHi Krishna,
OAMessageChoiceBean abc = (OAMessageChoiceBean) createWebBean
(pageContext, MESSAGE_CHOICE_BEAN);
abc.setPickListViewUsageName("ListVO");
abc.setListValueAttribute(" ");
abc.setListDisplayAttribute(" " );
abc.setID("ID");
this wl help u I guess..
for more details Refer JDev Guide. -
Newly Created Group and Workspace. Can't add new participants to Workspace
Hi,
So I have recently created a Group. Oracle_Utilities_Customer_Care_and_Billing to be exact. Now the group has been approved and verified. So a Home Workspace has been created, yay. I added a new member to a group. His membership has already been verified as well.
The problems
1.) I can't add him as participant to the Home Workspace. I have been browsing the forums and didn't find anything that I could have done wrong.
2.) I did create a new Workspace (lets call it W2). I can't add any of the members in the existing group as participant, however, I can add the Home_Workspace.Participant group as a participant. Can't I choose who can join the workspace.
I read the forums and the FAQs but can't seem to find anything wrong to what I have done. I have also updated the Settings of the group through BOLAdministration screen. From there I can only see 3 members in the group. The 4th one I added is not yet there. In the https://beehiveonline-apex.oracle.com/pls/apex/f?p=200:2:736394962014012::NO::: screen the 4th member is there and he is verified.
Hope you guys can help. We hope to have this working as soon as possible.
Thanks,
RichmondRichmond,
we had a liock file jamming the provisioning process after a jvm failed - I have cleared thia now so all 4 users should eb available in the system.
The underscores in the Workspace name are vital to maintain the connection between the group and the Workspace and if the Workspace is renamed the linkage will be broken. Putting it back will re-establish the link but you may have missed a user in the process. To get them into the Workspace you will have to add them manually by chosing them in the new Participants area.
I have manually readded Grant Murray and the group looks complete now.
There should be a group visible called Oracle_Utilities_Customer_Care_and_Billing.
Phil -
Create profile and set console font
Hi,
I'm not really a powershell expert, even though i use it daily. I've been looking into creating a profile to make life easier. So i made a little script to auto create a profile and set the console properties, load some modules etc.
The one thing i have not found an answer for is how can i set the console to use Lucinda Console font in stead of that dreadful raster font?
This posting is provided "AS IS" with no warranties or guarantees and confers no rightsHi,
Thanks. I am aware of the console settings available to powershell, but thanks anyway.
So the reg settings should be stored for the current user only in the key HKCU\Console. That will only affect the logged on user. It is not dynamic, as you say, but that's ok. I just need to have it set.
So changing the following settings would change the font for CMD.exe and powershell.exe:
REG ADD HKCU\Console /v FaceName /d "Lucida Console" /f
REG ADD HKCU\Console /v FontSize /t REG_DWORD /d 0x000c0000 /f
REG ADD HKCU\Console /v FontWeight /t REG_DWORD /d 0x00000190 /f
REG ADD HKCU\Console /v FontFamily /t REG_DWORD /d 0x36 /f
Push-Location
Set-Location HKCU:\Console
New-Item ".\%SystemRoot%_system32_WindowsPowerShell_v1.0_powershell.exe"
Set-Location ".\%SystemRoot%_system32_WindowsPowerShell_v1.0_powershell.exe"
New-ItemProperty . FaceName -type STRING -value "Lucida Console"
New-ItemProperty . FontFamily -type DWORD -value 0x00000036
New-ItemProperty . FontSize -type DWORD -value 0x000c0000
New-ItemProperty . FontWeight -type DWORD -value 0x00000190
New-ItemProperty . HistoryNoDup -type DWORD -value 0x00000000
New-ItemProperty . QuickEdit -type DWORD -value 0x00000001
Pop-Location
Push-Location
Set-Location HKCU:\Console
New-Item '.\%SystemRoot%_SysWOW64_WindowsPowerShell_v1.0_powershell.exe'
Set-Location '.\%SystemRoot%_SysWOW64_WindowsPowerShell_v1.0_powershell.exe'
New-ItemProperty . FaceName -type STRING -value "Lucida Console"
New-ItemProperty . FontFamily -type DWORD -value 0x00000036
New-ItemProperty . FontSize -type DWORD -value 0x000c0000
New-ItemProperty . FontWeight -type DWORD -value 0x00000190
New-ItemProperty . HistoryNoDup -type DWORD -value 0x00000000
New-ItemProperty . QuickEdit -type DWORD -value 0x00000001
Pop-Location
So, that should've done the trick. I can open cmd.exe and powershell.exe, open the system menu, go to defaults, and verify that the settings are in fact set. However, the settings just doesn't take effect. I even opened the properties dialog box for the
PowerShell shortcut, to check the settings and I can still confirm that it had set the font correctly.
Still, whenever I launch PowerShell, I am greeted with the ugly raster font. So, the last check I did was to go into properties in the PowerShell window system menu, and check the font.
It was set to raster. So I changed it. The next time I opened PowerShell, it was back to raster.
So, no matter where I set it, or what I set, it still goes back to raster every da** time.
Where i come from, we call this a bug... A very annoying bug...
Edit: Btw, this is only happening on a handful of servers, not all. On some i am able to successfully script changing the font.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights -
How to create groups and add users?
Hello,
I have created 3 groups as Portal_Admin and added 2 users for each group.
When I am trying to grant permissions to these groups to the Applications owned by Portal30( I have logged in as portal30 at this point), I am unable to see these groups but am able to see these individual users.
I am trying to grant access to individual menu items/sub menus of a Portal Menu.
Is it correct way to do things?
Or am I wrong somewhere?
My Idea:
I would like to create 20 users 10 of each belong to particular Oracle schema and then organize these 20 as groups
who will access certain application objects.
I wanted to give Admin an option to add/del/modify users to and from a Group once initial setup is done.
We really stopped here.
Your help is appreciated.
Thanks
MadhavIt's a bug.
Type the name of the group you want to add the user to and click apply, if you typed it correctly the the group name will appear.
We are building a fix for this.
Portal PM -
Hi
I want to create for example Request
Shipping form.
i was create a form and publish to a SharePoint library.i was set the Repeating Section
for choice commodityand its price.
users can select any number commodity. but i have two request:
1- the user do not have ability to select
same commodity within a
dayaccording to picture.
2- when select some commodity, in Final Price control we have a total price.Hi Yuzarsiv, to check for duplicate entries, you should use an event receiver (first link below). To total the prices, see the second link. The third link is for additional reference.
https://salnikan.wordpress.com/2011/07/26/prevention-of-duplicate-entries-based-on-two-or-more-columns-in-a-sharepoint-list/
https://support.office.microsoft.com/en-us/article/Add-the-values-in-one-or-more-columns-of-a-repeating-table-or-section-3bdc1062-5352-49d4-a851-d7719b016443?CorrelationId=dcd2f32c-5cf4-4e1a-9f16-ed005ccb4fa1&ui=en-US&rs=en-US&ad=US
http://www.bizsupportonline.net/use-repeating-tables-infopath.htm
cameron rautmann -
Creating XMLDocuments and setting their DTD
Hello,
i am exporting java objects to XML. I can construct a DOM with a XMLDocument and using its print method export it.
What i was unable to do so far was setting the DTD of these documents.
If i construct a parser, parse the DTD and then get the DTD via
Document doc = parser.getDocument() and
DocType dtd = doc.getDocumentType() how
do i set the DTD of the freshly constructed XMLDocuments to use this one in order to be able to check the correctness of the documents using this DTD at a later time?
Thanks.
Regards,
DirkYour method of getting the DTD object is correct. However, we do not do any validation while creating the DOM tree
using the DOM APIs. So setting the DTD in the Document will not help in validating the DOM tree that is constructed.
The only way to validate an XML file is to parse the XML document using DOMParser or SAXParser.
Oracle XML Team
null
Maybe you are looking for
-
Spend limit check not getting validated while raising a shopping cart
Hi Experts, Can someone suggest me what could be the reason, I had a problem with a role when ever I assign a role to a user XXXX_EBP_EMPLOYEE_1350. which means if a user raises a shopping cart for the value greater than 1350 Euros system will check
-
A simple animation has been created using words as symbols. Each word has it's own movement, coming in from left to right, top to bottom, etc. There are no issues when the file is first created, but on occasion, when the .fla is then reopened (on the
-
Assigning sequential numbers for every lines within a group of records
The scenario is: This set of records with group number, lets say 100(group number) contains 7 lines/records. How to assign line numbers (sequential) for each line within these groups on the fly during the mapping process before inserting these set of
-
compressed seems to be the default when saving a DNG now. there is a check box for uncompressed but no description of whether the default it is lossless or lossy. there was a compression "lossless" check box in CS3. DNG spec says JPEG compression but
-
Paid for audiobook will not sync to Ipod itself
I bought a book from itunes for $25.95 and although the book is listed under my purchased items it is not on the ipod itself meaning I cannot listen to it. The option of "audiobook" is also not on the main menu of my Ipod as it use to be. I am assumi