Creating multiple tab reports using the same query in Web intelligence

Hi All,
I have created a Universe on a BW Query which has fields as below
AGE Depaatment Gender Grade
25       FIN                M            A
27       LES               F            A+
60       SWS            M             A++
Based on this data i have created a WEbi report which shows all of these data under one tab.
Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
Similarly i create two more new report tabs.
in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
2nd report contains only finance data, third contains only Les data and fourth only SWs Data.
Is it possible to create this report using the same query?
Regards,
Raj.

You should use report filters, not query filters.
A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
This is a fairly confusing bit for folks that are new to Web Intelligence.

Similar Messages

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

Add Multiple Detail Items Using the Same Query String Parameter

I am using InfoPath 2010 and SharePoint 2010.
I have 2 forms libraries - Expense and Expense Details.
The 2 libraries are linked via a custom site column Expense ID.
The Expense form contains the main header type info you would typically find on an expense report; e.g., name, purpose, department, etc.
The Expense Details form contains multiple detail expenses related to the main expense report such as airfare, rental car, etc.
I have created a page that displays an expense report with all of the related expense detail items.
The page contains a link to add a new expense detail and passes the Expense ID of the Expense form to the Expense Detail form.
This all works fine. The problem comes in after the first expense detail form is submitted.
I can successfully submit the first detail item. However, the expense detail form loses the Expense ID that was passed to it after the first expense detail form has been submitted.
The parameter still shows in the URL but the detail form no longer shows the value of the parameter.
What do I need to do in order to be able to add multiple expense detail items using the same Expense ID that was passed to the form?
I have tried using a Submit Behavior of Open a new form, Close the form, and Leave the form open.
None of these options give me what I need. Thanks for your help.
pam

Laura Rogers Blog
In case anyone stumbles upon this looking for an answer. Laura Rogers has the answer found in the comments section of her blog above. It’s not the best but it
does work. You have to add an extra Info Path Web Form for it to work. I know, you can roll your eyes.<o:p></o:p>
Steps.<o:p></o:p>
1. Add Query String<o:p></o:p>
2. Add the extra Info Path form to the page. This form will be a hidden on the page and will receive the value from the query string.<o:p></o:p>
3. Add your original Info Path form and have it receive a parameter from the hidden Info Path form.<o:p></o:p>
Now, when you hit save and it opens a new form the 3 Info Path form will function properly. <o:p></o:p>

How to create multiple Purchase Order using the same document number?

HI Friends,
I m in a product which extracts data from SAP and stored in Access database.
For that,while i extracting Purchase Order from the Demo Database (SBODemo_US)for OEC Computers,the same DocNum is used for several Purchase Order using Index Line numbers.
eg:
DocNum for Purchase Order1 -->3000   0 (Index)
DocNum for Purchase Order2 -->3000   1 (Index)
    But i can't create multiple Purchase Order using same DocNum manually in SAP B1,Could anybody please help me <b>to create a Purchase Order using same DocumentNumber?</b>
Thanks in Advance
SooriyaKala.P

Hi,
The problem statement is not quite clear to me.
As far as I understand your statement, I think you want to club multiple orders into one purchase order using the index incrementally.
For this I think once you have created the first purchase order, open the purchase order in edit mode the second time and append the new line items.
If I am getting you wrong please explain the problem statement in more detail.
Regards,
Rara.

Question about multiple resource objects using the same OID target account

In Oracle Identity Manager 11g with OID connector as a target system.
Is it possible to create multiple resources that use the same OID IT Resource. Each resource is responsible for provisioning certain OID attributes of the same OID account. For example 'OID User' would provision the basic account and a separate resource called 'Department1 User' would provision attributes not provisioned by OID User.

Yes, definitely. Here is how it would work:
- You would have to make sure that the resource OID User always gets provisioned first, so that the account exist when these additional attributes are being set for the user via the other resource Department1 User. You can do this with Resource Dependency in OIM.
- Now for using the same IT Resource, just create the new form and in the IT Resource type form field, map the properties to the same IT Resource Definition, so when the Provisioning Process gets invoked it uses the same IT Resource instead.
Thanks
SRS

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

Can multiple APEX application use the same parsing schema?

Hi,
I have 4.2 APEX thru pl/sql Gatewat, 11gr2 DB and using theme 24.
Due to the APEX limitation for version control I would be splitting 1 big ERP applications into 24 different APEX applications and each application would be considered as 1 unit for version control.
I have about 800 tables and I would assume that all of these would need to be stored in 1 schema since a lot of these table are linked thru FK.
Can I have multiple APEX APPS using the same parsing schema? or is there a better way to do this?
Thanks in advance!

Hi,
Multiple applications can have same (one) parsing schema.
You can test that on e.g. apex.oracle.com, where normally you have only one schema and you create multiple applications and all use that same schema.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai
Edited by: jarola on Jan 28, 2013 7:15 PM

Can't create multiple dependent LOVs from the same bind variable

Hi all,
I'm having difficulty creating multiple dependent LOVs from queries based on the same bind variable in my JSF application (JDev 10.1.3.1). Basically I have a static LOV in a af:selectOneChoice component from which users select a value which then becomes the bind variable value for two separate queries that generate two different dependent LOV. Having developed the code along the lines of Steve Muench 's blog (http://radio.weblogs.com/0118231/2006/04/03.html#a685), the first dependent LOV works really well. The first dynamic LOV gets refreshed whenever the list from the static LOV changes, and I can execute other queries based on the values selected.
The problem arises when I want to create the second dynamic/dependent LOV that has the same bind variable based on the same selected value from the static LOV. Here I would also like the functionality whereby the second dynamic LOV is also refreshed after the selected value in the static LOV changes. Thinking that all I had to do was replicate the methodology used in creating the first dependent LOV, I created the second iterator, invokeAction and other binding components in the PageDef. The executable section now looks like the following:
<iterator id="SelectStaticQueryViewObjIterator"
              Binds="SelectStaticQueryViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery1BindParameter"
              Binds="ExecuteWithParams1" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery1ViewObjIterator"
              Binds="SelectDynamicQuery1ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>
<invokeAction id="refreshDynamicQuery2BindParameter"
              Binds="ExecuteWithParams2" Refresh="prepareModel"
              RefreshCondition="#{empty requestScope.VariableChanged}"/>
<iterator id="SelectDynamicQuery2ViewObjIterator"
              Binds="SelectDynamicQuery2ViewObj" RangeSize="-1"
              DataControl="DMSApplicationModule1DataControl"/>I now have a problem whereby everytime I change the value of the static LOV, multiple HTML components for the same ADF component are being generated (the LOVs are refreshed via PPR). The surprising thing is that this duplicating behaviour applies to all ADF components listed after the first dynamic LOV in the *.jspx source. For example, I have a <af:outputText="Test Text"/> component created after the first dynamic LOV. Each time the value in the static LOV changes, a duplicate HTML component is created. This also applies to the 'related' second dynamic LOV which is bound to a af:selectOneChoice component - multiple dropdown lists are created. I've checked with the browser's Page Source and there are actually multiple html components being generated with their own unique ADF-generated IDs. I've tried all different options for the Referesh and RefreshCondition attibutes in the second invokeAction element but nothing seems to eliminate this issue.
Any suggestions about how I might create multiple dependent LOVs from the same bind variable that get refreshed when the selected value changes would be greatly appreciated.
Thanks
George

Hi all,
Just updating the thread on how I've overcome this issue. As it stood the manner in which I was trying to solve my use case, as described above, was creating an absolute mess. Then with a blank sheet of paper I quickly realised that a much simpler solution would be to create a whole series of master-detail VOs and build my components around them. Thankfully I haven't had any issues going down this path as yet.
Cheers
George

Is It Possible to create multiple tab report in OBIEE 11g?

Is It Possible to create multiple tab report in OBIEE 11g?

Triple post even! Multiple tabs in a single OBIEE & https://forums.oracle.com/thread/2560266
Stick to one post!

Two commands in the report using the same parameter - fail under Java

I have a report that contains 2 SQL commands.
Both of these commands use one parameter X of type Number in their 'WHERE' clause.
When i'm viewing the report in CR 2008, i'm asked for a value of this parameter and all data is filled in the report - OK
The problem occurs when the same report is printed through Crystal Java Runtime:
Report is printed without data! - it's empty.
What we noticed in the debug information thrown by the Crystal libraries is that parameter value is set only in one of these commands:
Original statement 1:
select a.something
from ANM_T a
where a.anmid = {?PARAMETER01Id}
Original statement 2:
SELECT * from ANM_T a
WHERE a.anmid={?PARAMETER01Id}
OUTCOME of Statement 1:
select a.something
from ANM_T a
where a.anmid = 0
OUTCOME of Statement 2:
SELECT * from ANM_T a
WHERE a.anmid=9825
In above example we may see that crystal set the value only in the second statement - first one got 0 - i suspect its some default value.
Parameter in the Java code is set in the right way. In case of using only one statement it works. If we use two separate parameters (whose values are equal ) it also works.
// we have also the loop over the parameters
ParameterFieldController paramFieldController =
                report.getDataDefController().getParameterFieldController();
paramFieldController.setCurrentValue( "", paramName, paramValue );
What is strange for me is that Crystal Reports enables to use the same parameter in two commands but if you edit one of them you may change the type of this parameter for a command ( for example from Number to String) but the parameter type in the second command remains unchanged ( it's strange because in my opinion it is the same parameter). In the Field Explorer under the Parameter Fields i still see one parameter of type used in the second command.

Hello all,
We have prepared some sample code to illustrate the issue.
We have modified the sample application (Link: [http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/c07fec3e-3e11-2c10-1991-8c0fb0b82b75]) to that it also changes the parameter value. Parameter is used in two commands saved in report.
The code changing the parameters value looks like this:
private static void changeParameters(ReportClientDocument reportClientDoc) throws ReportSDKException {
          DataDefController dataDefController = reportClientDoc.getDataDefController();
        Fields fields = dataDefController.getDataDefinition().getParameterFields();
        for( int i = 0; i < fields.size(); i++ ){
            Field field = (Field)fields.getField( i );
            if( field.getKind() == FieldKind.parameterField ){
                        setParameter( ((ParameterField)field).getName(), "9825" , reportClientDoc);
private static void setParameter( String paramName, String paramValue, ReportClientDocument document ) throws ReportSDKException {
     ParameterFieldController paramFieldController =
                document.getDataDefController().getParameterFieldController();
     paramFieldController.setCurrentValue( "", paramName, paramValue );
We have tried the following codes to change the connection info used in commands:
Attempt 1
          Tables tables = databaseController.getDatabase().getTables();
          //Set the datasource for all main report tables.
          for (int i = 0; i < tables.size(); i++) {
               ITable table = tables.getTable(i);
               //Keep existing name and alias.
               table.setName(table.getName());
               table.setAlias(table.getAlias());
               //Change connection information properties.
               IConnectionInfo connectionInfo = table.getConnectionInfo();
               //Set new table connection property attributes.
               connectionInfo.setAttributes(propertyBag);
               //Set database username and password.
               //NOTE: Even if these the username and password properties don't change when switching databases, the
               //database password is *not* saved in the report and must be set at runtime if the database is secured.
               connectionInfo.setUserName(DBUSERNAME);
               connectionInfo.setPassword(DBPASSWORD);
               connectionInfo.setKind(ConnectionInfoKind.SQL);
               table.setConnectionInfo(connectionInfo);
               //Update old table in the report with the new table.
               databaseController.setTableLocation(table, tables.getTable(i));
               //databaseController.setTableLocation(tables.getTable(i), table);
Attempt 2
         newConnectionInfo.setAttributes(propertyBag);
         connectionInfo.setUserName(DBUSERNAME);
         connectionInfo.setPassword(DBPASSWORD);
         //preserve subreport links
         SubreportController src = doc.getSubreportController();
         Map<String, SubreportLinks> linkMapper = new HashMap<String,SubreportLinks>();
         for(String subreportName : src.getSubreportNames()){
             linkMapper.put(subreportName,
                 (SubreportLinks) src.getSubreportLinks(subreportName).clone(true));
         //If this connection needed parameters, we would use this field.
         Fields<IParameterField> pFields = doc.getDataDefController().getDataDefinition().getParameterFields();
         replaceConnectionInfos(doc.getDatabaseController(), newConnectionInfo, pFields);
         IStrings strs = src.getSubreportNames();
         Iterator<String> it = strs.iterator();
         while (it.hasNext()) {
           String name = it.next();
           ISubreportClientDocument subreport = src.getSubreport(name);
           pFields = subreport.getDataDefController().getDataDefinition().getParameterFields();
           replaceConnectionInfos(subreport.getDatabaseController(), newConnectionInfo, pFields);
         //reconnect subreport links since when using replaceConnection links are erased
         for(String subreportName : src.getSubreportNames())
           src.setSubreportLinks(subreportName, linkMapper.get(subreportName));
private static void replaceConnectionInfos(DatabaseController aDc, IConnectionInfo aNewConnInfo, Fields<IParameterField> aParameterField) throws ReportSDKException {
         ConnectionInfos cis = aDc.getConnectionInfos(null);
         for (IConnectionInfo oldConnInfo : cis)
           aDc.replaceConnection(oldConnInfo, aNewConnInfo, aParameterField, DBOptions._useDefault
               + DBOptions._doNotVerifyDB);
In both cases, the observed problem occurred. In one query the parameter was set properly, while on the other it was set to 0 (or empty string in case of string parameters). What is more, no data appeared on the print.
Do you happen to know the reason of this issue?How can we fix the problem?
Best regards
Mateusz Błaż

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

Multiple presentation servers using the same RPD

Hi everyone,
So as most people know, the iPhone has a cool app that allows you to login and look at your OBIEE content. In theory it's really cool, but as it turns out, a lot of the cool graphs default to Flash and Flash is not supported by the iPhone.
Using a flag in the instance config file, its possible to default all graphs to png's instead of Flash. But that causes all the interactive drillability to go away since it's just a flat picture.
It seems that an elegant solution to this issue would be to have two presentation services running; one that defaults to Flash and one that defaults to png's. Then let the OC4J container determine if the device accessing the website is a mobile device or a full client browser. Mobile devices get routed to the png's and non-mobile devices go to the standard Flash page.
Although not supported by Oracle, it is possible to setup multiple presentation services on the same server. In fact, RNM has a great blog about how to accomplish this (http://rnm1978.wordpress.com/2009/08/25/multiple-rpds-on-one-server-part-1-the-bi-server/).
I was able to setup two presentation services (AnalyticsWeb and AnalyticsMobile) and point them at the same catalog folder. That way you don't have to duplicate you're work.
The one thing I couldn't figure out how to do was to point them at the same RPD file. Ideally, we would have one rpd file with the master metadata definitions, and both presentation services would drive from that single RPD. However, the BI Server throws and error of the same RPD appears twice in the NQSConfig.ini file. I also created a shortcut to the master RPD, but upon startup, the BI Servers said that it was not a valid repository file.
Worst case scenario, I could just use copy & paste to duplicate the single repository. And then each time I updated one, I would just need to delete the other and re-copy. But that seems a little tedious and I was hoping for a more elegant solution.
Does anyone know how I could get the NQSConfig.ini to let me point to the same RPD twice? Is there some kind of symbolic link or image I could create?
If it helps, I'm working with OBIEE 10.1.3.4 on a Windows Server 2003 environment with the OC4J standalone container.
Thanks for the help!
-Joe

Hey Everyone,
Just to add the finishing touch to this thread, the following can be implemented to perform the redirect based on mobile versus traditional PC devices.
In the folder: C:\OracleBI\oc4j_bi\j2ee\home\default-web-app
I created the following OBIEE.html file
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html lang="en,us">
<HEAD>
<TITLE>Test OBIEE Redirect Page<TITLE>
</HEAD>
<BODY>
<script type="text/javascript">
var agent = (navigator.userAgent).toLowerCase();
var weburl = './analytics/';
var moburl = './analyticsMobile/';
var reg_exp = /(ipod|iphone|android|opera mini|blackberry|palm os|palm|hiptop|avantgo|plucker|xiino|blazer|elaine|windows ce; ppc;|windows ce; smartphone;|windows ce; iemobile|up.browser|up.link|mmp|symbian|smartphone|midp|wap|vodafone|o2|pocket|kindle|mobile|pda|psp|treo)/;
if( reg_exp.test(agent) ) {
window.location = moburl;
else {
window.location = weburl;
</script>
</BODY></HTML>
The javascript gets the USER agent variable and does a regular expression match to see if it's any popular handheld device. If so, it redirects them to the mobile address. Otherwise the user is directed to the standard site.
All I need to do is pass around the URL:
http://localhost:9704/OBIEE.html (instead of the standard http://localhost:9704/analytics)
And users will be dynamically sent to the correct location.
thanks everyone!
-Joe

How to create cross tab reports using RAS SDK api with Crystal Reports XI

Hi Everybody,
Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
Thanks in advance.

Hi,
The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
In the duplication wizard I just need to define the axis (using drag and drop).
if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
for example: to find the amount of receipt by months:
On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
What you'll get is something like:
months: jan feb mar apr ......
buyer_name
jhon_smith 100 50 30 250 ......
jhon_doe 80 45 90 453 ........
and so on.....

How do I create a new website using the same format as my last one?

I created a site last year and now I want to use the same templates for blog, photos, albums, etc. as last year's. In other words, I'm looking for a "save as" where I can add new content but not have to re-format everything. Thanks for helping.

Welcome to the Apple Discussions. Open iWeb so you see your original site in the left hand pane. Use the File->New Site menu option to create a new site. Give it the name you want.
Now select a page in your original site and type Command+D. That will duplicate the page. Drag the duplicate page down to the new site and rename it as needed. Do that for the other pages you need in the original site.
OT

Creating multiple tab reports using the same query in Web intelligence

Similar Messages

Maybe you are looking for