Creating .swf from .fla file using ADT command line

Dear Adobe Community and Moderators:
Is it possible to use the ADT command line to directly compile an .fla file into an .swf file? Context: I have an app created in Flash Pro CS55 (6 months worth of work), but now found Adobe has dropped Flash Pro in favor of Flash Builder or Flex. I have some native extensions I want to use for iOS, but they require Air 3.1 to compile (swf-version=14) i.e. using the MessageUI framework in a static .a library for an Air app. Flash Pro CS55's top end limit seems to be swf-version=13 (Flash 11). Because of heavy investment in time and energy into our Air app in Flash Pro, it's not feasible to convert to Flex by end of week. I tried creating an .swc file, and taking the library.swf from that, but alas, a catch-22, Flash Pro CS55 only compiles to swf-version=13.
Is there any way to either (a) directly compile my root .swf file (from the .fla file) using a command line (so I can use ADT from Air 3.1 SDK) or (b) some way I can marry a native extension I've found I can use on GitHub which is swf-version=14? Again, my issue is that I have to use Air 3.1 since only it supports iOS5.
Any thoughts, suggestions, comments are highly appreciated (including if it's not possible to do what I'm trying to do).
Thank you Adobe community in advance,
Alex

I have the exact same question, please respond if you hold the answer to this! mxmlc won't work for me since I have created too many assets within the fla already! Thanks!

Similar Messages

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

How to use ADT command line to build an iOS application including ActionScript native extension file

Hi All,
I have ANE files packaged in my iOS application. I can export them to release build through FB no problem.
But How can I include those ANE files through ADT command line? Can I do like other library files?
Thanks in advance for any helps.

I was stupid that did not find the right syntax.
-extdir extensionsDir will do the trick.

Printing PDF file Using Shell Command Line

Hello I am writing a program from MicroSoft Excel's Macro that will print PDF files. I have managed to get the program to work but I cannot prevent the file not being opened. Basically the PDF file would get printed but the file would automatically opened up.
I am using shell command line to write this. And this is my code:
FileName = "C:\EGB Gaming Lab\Training Manual\Testing Documents\Testing Checklists\Bill Validator*"
myShell.Run ("Acrobat.exe /t" & FileName)
I have tried using /h but it still opens the file.
I am referring to this support case:
http://support.adobe.com/devsup/devsup.nsf/docs/52080.htm
Thank you

You may be able to adopt this script:
on open dropped_items
   -- Write a message into the event log.
   log " --- Starting on " & ((current date) as string) & " --- "
   -- set see to alias "Macintosh-HD:Users:mac:Desktop:app.html"
   -- set dropped_items to {see}
   set the_app to "Safari"
   repeat with dropped_item_ref in dropped_items
      --set UrlBase to "xzzx FILE://" & POSIX path of dropped_item_ref
      --display dialog UrlBase
      -- Activate
      activate application the_app
      -- Open the URL
      tell application the_app
         open dropped_item_ref
         -- print dropped_item_ref
         tell application "System Events"
            tell process the_app
               delay 3
               -- click menu item "Print..." of menu "File" of menu bar 1
               keystroke "p" using command down
               delay 1
               keystroke return
               delay 10
               keystroke "w" using command down
            end tell
         end tell
         --quit
      end tell
   end repeat
end open

How to compile swf from fla files and folders?

Hey,
I have decompiled a swf file and got a fla file and also all kind of folders including action scripts.
How do I run this? I mean if I make some changes how do I convert it back to a swf file?
I created a swf file from one fla file but I got a file that was like 20x less in size then the original. I think it was not using the files in the folders.
Thanks!

open the fla and publish. if that doesn't work, you have errors in your decompile.

Read classpath from a file on dos command line

Hi,
How to supply the classpath information from a file. I have a file with my classpath and I want to run java command as below
java -cp classpath.txt com.mycompany.MyTest
How to supply classpath information that is in classpath.txt file to java executable?
Thanks for all your help
Siva

This seems to work
for /f %%a in (classpath.txt) do (
java -Xmx1280M -cp %%a %*
)

File adapter OS command line - Calling a command remotely ??

Hi,
We have a scenario where in which receiver file adapter after putting a file on the FTP , a subsequent XML loader needs to be called which would load data into the client legacy ERP system.
There seems to be some idea about doing it through file adapter OS command line.
The problem is the how to call this loader command remotely from our file adapter OS command line.
Any help would be appreciated ???

>> The problem is the how to call this loader command remotely from our file adapter OS command line.
The below link might be helpful ...
http://wiki.sdn.sap.com/wiki/display/XI/SAPXIFileAdapterOSCommandLine+Feature

Including files/resources using the ADT command line

Hi all,
I'm trying to get file support into my ADT helper tool before I release an update. I am still having problems.
According to the Adobe docs on the subject, the following commands can be used:
-C "path/to/new/working/directory" [files and folders to include]
-e [files and folders to include] [package directory to add these to]
The following example works fine for me:
// This changes the working directory to my audio resources folder, and then packages the file 'track.mp3' into the root folder of my application package.
-C "C:\\resources\audio" "track.mp3"
Hoiwever using -e option in any way generates an error:
// This copies the file 'sfx.mp3' from the current working directory to the application package subdirectory 'lib'
-e sfx.mp3 lib
This also causes an error:
// Change the working directory to resources/audio and then copy the file called 'sfx.mp3' to the 'lib' subfolder of the application package. Error.
-C "C:\\resources\audio" -e sfx.mp3 lib
The error in both cases is:
File does not exist: sfx.mp3
Any ideas how I can use the -e option? Does the working directory not come in to it - do i always have to use an absolute path to my file?
Thanks in advance,
Peter

Not sure if it will help in your situation, but I just include files by adding the filepath at the end of my adt command line (no -e or -c). Eg (included files or bolded):
"C:\Program Files (x86)\Java\jre6\bin\java" -jar C:\Users\t.randall\Documents\AIRSDK\AIR_3.0\lib\adt.jar -package -target ipa-ad-hoc -storetype pkcs12 -keystore ..\..\Deployment\CareerBox.p12 -storepass pass -provisioning-profile ..\..\Deployment\CareerBox.mobileprovision ..\..\CareerBox.ipa CareerBox_iPhone-app.xml CareerBox_iPhone.swf AppIconsForPublish\Icon29x.png AppIconsForPublish\Icon57x.png AppIconsForPublish\[email protected] AppIconsForPublish\Icon512x.png AppIconsForPublish\Icon48x.png AppIconsForPublish\Icon72x.png Default.png [email protected] Default-Landscape~ipad.png Data\Cards.xml Data\CareerCards.xml

Issue while creating BPEL artifacts using BPEL command line tool

All
I am trying to create BPEL artificats for SQL server stored procedure for SQO Server 2005 using BPEL Command line tool.
My demo.properties is
ProductName=Microsoft SQL Server
DriverClassName=com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionString=jdbc:sqlserver://10.10.20.2:1433;databaseName=dAP
Username:apcdb
Password:password1
SchemaName:dev
ProcedureName:spiSOATesting
ServiceName:SQLServerSPService
DatabaseConnection:MSSQLServer
Destination:c:/temp/sqlprocedure
and I have create a batch file called as generate.bat and it contains following information
java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\jlib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %1
and when I try to run the command at BPEL PM Developer Prompt, I am getting Procedure not found, Can one please tell, what is the cause of this error. and how does this command line tool exactly work.
Following is the output from command prompt.
D:\product\10.1.3.1\OracleAS_1\bpel\samples>D:\temp\sqlprocedure\generate.bat D:\temp\sqlprocedure\demo.properties
D:\product\10.1.3.1\OracleAS_1\bpel\samples>java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar
;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\j
lib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts D:\temp\sqlprocedure\demo.properties
Procedure not found: dAP.spiSOATesting
Thank you

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

Creating spreadsheet from data files

Why do I get the numbers in square brackets e.g. f[0].p1[0].Name[0], when I collate data using the 'Create spreadsheet from data files' command. I only want to export object names as column titles in Excel. This driving me mad!

I got the same problem as Zali.I really need some one help regarding regarding this topic.

Restore selected report from biar file using biarengine.jar

Hi Experts,
I have created a biar file with full backup of my boe server using biar command line tool.
Now I want to test the biar by importing a selected report from that biar file. How should I form my properties file? Does the exportQuery property work when action=importXML ?
Many thanks,
PASG

Hi,
I found that always the full backup is being restored if I execute biarengine.jar to restore the biar file and it ignores exportQuery parameter.
What I did to restore a selected report from that biar file is as below:
1. Change the extension of the biar file to .zip.
2. Extract the files.
3. In the BusinessObjects.xml file, keep only those infoobjects which has to be restored and delete all other infoobjects.
4. Zip the files.
5. Change the extension of the zip file to .biar.
6. Execute biarengine.jar to restore the objects.
I checked and found that by this way, I can restore a selective object from the biar file.
Just wanted to know if this is a recommended approach or not. Can there be any issue later ?
Regards,
PASG

How to delete the items in the recycle bin permanently from the windows using Diruse command

How to delete the items in the recycle bin permanently from the windows using Diruse command.
Because most of the time we get out of disk space issues.
Can somebody help me in giving with an example

You can right-click Recycle Bin|Properties and choose radio button for
Don't move files ....
This one may also help.
http://technet.microsoft.com/en-us/library/cc784980(v=ws.10).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Choose File Form Data Create Spreasheet From Data Files

I am following the tutorial for LC 8 and when I get to the topic titled "Collecting the data in a spreadsheet" it says to "Choose File > Form Data > Create Spreadsheet From Data Files".
However, when I try to follow that path I do not see a "Form Data > Create Spreadsheet From Data Files" menu option.
What am I not doing properly? How do I accomplish this task?
Thanks!

Thank you so much Paul. I have been trying all day to locate the method by which I could create a spreadsheet using the pdf submit route. I suppose the tutorial in CS4 should have been changed to reflect the changed explanations, but I guess that would be difficult to do. Anyway it worked and I can now do the analysis I need from my customers (lots of pupils!).
Best wishes,
Kevin Palmer

Can't create PDF from Word file

I may be missing some functionality or that functionality may not exist.
I'm running Acrobat Pro 9.2 and MS Word 2004 (11.5) on OSX Leopard 10.5.8. I want to create a PDF from a Word file but NOT using the Print dialog. I want to either create it in Acrobat using File > Create PDF > From File or create it from within Word using the Acrobat menu/toolbar. This is so that it will end up as a tagged PDF.
However, I don't have an Acrobat menu or toolbar in Word. I thought Acrobat was supposed to have installed these into MS Office when I installed Acrobat. And when within Acrobat if I select File > Create PDF > From File and choose a Word file, I get a message "Acrobat could not open 'filename.doc' because it is either not a supported file type or because the file has been damaged". This happens for all Word files.
Looking in Acrobat > About Adobe Plug-Ins... under Convert2AdobePDF it says 'Loaded: no'.
Are these two methods of converting Word files to PDFs something that can only be done in the Windows version of Acrobat? Or is there a plug-in or update I can download to install this missing functionality?
Thanks for your help,
Mark

Keep your Office2004. But Office 2008 does have a way to create PDF's from within the word and excel Programs.
It works better than through the AdobePDF Printer, or through the Apple Print menus save as PDF. (Unless you have X.6.x Snow leopard)
One thing it gets around is a long standing Problem Acrobat has had with word and excel since Word 6.0.1.a/Excel 5.0.1a. Acrobat doesn't know how to interpert Word Page section Breaks. Chopping up a word/excel document in to multiple PDFs that have to be merged back together. MS came up with their own PDF Converter that gets around that problem.

Adobe v9 on W7 and office 2007. cannot create PDF from MS word using Adobe. But can from Excel, PPT

Adobe v9 on W7 and office 2007. cannot create PDF from MS word using Adobe. But can from Excel, PPT and other MS office apps. Reinslalled Adobe, updated Office, and Adobe no help! Also I can create a pdf from the MS Word and it is using the Adobe 9. So one would think that's good. No it isn't when you need to combine different files to one big PDF document. Any suggetions? Thank you

Yes, I’m saying that I can in WORD use “Save As ADOBE pdf” but cannot in ADOBE create a pdf file from a WORD (.doc or .docx) document. While I can from other MS Office apps like Excel and PowerPoint.
I understand I can use “work around” and save doc in WORD as pdf then compile all files needed (xml, ppt, pdf) in the ADOBE v9. to one big pdf document. But that is not the point of this post.
Jarda @ PC+NET Solutions
Mobile 613-532-7023
Office 613-385-1268
<http://www.pcplusnet.net/> www.pcplusnet.net

Creating .swf from .fla file using ADT command line

Similar Messages

Maybe you are looking for