Creation of new field with the absense of user exit
Helllo Abapians,
For one of the T.Code , i dont find any user exits for that T.code.but one customized field is there to that T.CODE.
How it is possible???
hi,
Plz refer to the program on the link to find the user exit.
http://www.erpgenie.com/abap/code/abap26.htm
Regards
Sumit Agarwal
Similar Messages
-
I have iPhone, iPad and macbook, need to ammend all the contacts the phone number adding a digit in between the phone number.(telephone number increase one digit in my country, from 088888888 to 098888888), adding the 9
Deauthorize all.
Then authorize the active computers. -
How to add a new Field to the WEB User Interface in CRM 2007
Dear experts,
I have been struggling to add a new field to the (CRM 2007) user interface from available fields for a specific view.
I have maintained settings in BS__WD_CMPWBàRuntime Repository editoràComponentàViewàConfigurationàNew ConfigurationàAvailable FieldsàField Propertiesàand save.
But the field is only appearing in display mode in the Web UI, which doesnu2019t allows any user input.
I need your help to resolve the issue, I would be grateful if you could provide step-by-step documentation with screenshots or any other kind of documentation.
Each suggestion will be appreciated.
Best regards,
Raghu ram.Hi Raghu Ram,
I think you added a new custom field using some method like EEWB etc.,
Then, you are adding the field onto the UI using UI Configuration Tool .. right ?
These are the steps to diagnose:
Method 1.Check the field properties in the model browser first.
It should be showing 'C' i.e., CHANGEABLE. If it is showing as 'R', it is only READABLE.
In such a case you need to find a BADI to change the field properties.
For example, in Marketing Applications OBJ BADI has a method CHANGE FIELD PROPERTIES for this purpose.
Method 2. Debug and check what is the value coming for RV_DISABLED parameter in the GET_I method in BSP_WD_CMPWB. This should be FALSE.
Method 3. Check what are the field properties in the UI Configuration tool.
Make sure it is not a display only field.
Regards,
Masood Imrani S. -
Recuperate value of new field with a BAdI
Hi everybody,
I am beginner in ABAP.
Currently I have create a new field in SAP CRM thanks to EEWB (Easy Enhancement Workbench). This field is visible is the screen of SAP (tcode BUP3).
I would to recuperate value of this new field at the time when user save a new value.
I have tried to recuperate value in the good table but I obtain the previous value.
I have no idea how to do this !
Do I need to use "dynpro" ?
Thank you by advance for your help !
Best regards,
RémiTry
CALL FUNCTION 'BUP_MEMORY_BUT000_GET'
EXPORTING
iv_partner_guid = l_guid
IMPORTING
es_but000 = ls_but000
EXCEPTIONS
not_found = 1
parameter_error = 2
OTHERS = 3.
IF sy-subrc EQ 1 .
CALL FUNCTION 'BUP_BUT000_SELECT_WITH_GUID'
EXPORTING
i_partner_guid = l_guid
IMPORTING
e_but000 = ls_but000
EXCEPTIONS
not_found = 1
bpext_not_entered = 2
OTHERS = 3.
ENDIF .
Edited by: Arseni Gallardo on Sep 19, 2011 5:55 PM -
Populated the new field with historic data
HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
RaviHi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy -
Report Painter Library: troubles with new field in the additional structure
Hi, ALL!
I'm creating a new field in the Report Painter table GLFUNCT. Do do it I created my field in the additional structure GLDBZ for GLFUNCT and create an row in the T804C table for new field.
Who has expirience in customizing using T804* tables? What tables should be used and how? I have the following troubles:
- I do not see the new field as characteristic in the library - I don't know the customizing table to set fields from additional structure as characteristic
- in the generated Report Painter program my new field exists but call of filler routine is always disabled
Thanks
TatianaHi Shabitha,
just wondering if you ever found an answer to this, as i'm searching for info on same matter.
Thanks, Regards,
Okan Yarligan -
How to find out the user who has created a new field in the custom table.
How to find out the user details who has created a new field in the custom table.
Thanks,
JoanHi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani -
Creation of new fields under sales tab in XD01
Hello,
I have to create a new field under the sales tab in XD01. Please let me know how i can do this? or is there any other way of adding the new fields to the customer master..
Thank You!!!!
SureshHi,
you can add to fields with customizing a cross the below path:
Financial accounting/accounts receivable and accounts payable/customer accounts/master data/define screen per activity (customers),
but i dont know how add new fields,
regards,
David -
Adding new field to the page when the field source not available
Hi,
I have a requirement to add vendor_serial_number (manufacturer's serial number) to the page /oracle/apps/csi/instance/general/webui/InstanceDetailsPG. This column is available in mtl_serial_numbers_all_v table. I don't see any VO in that page has access to this. What is the best approach to add this field in the page.
Create a new VO with the query to get the vendor_serail_number based on the item_number, serial_number.
Attach the VO to the AM InstanceDetailsAM or create a new custom AM as we can't attach the new VO to the seeded AM.
Add a item to the page that gets the column value from this new VO.
Please suggest.
Thanks,
HC1. Create the textfield item using personalization.
2. Create a View Object to get the field
3. Extend the InstanceDetailsCO and attach the VO to AM programatically in the extended CO.
Any suggestions.
Thanks,
HC -
Call transaction in new session with the value at hotspot
Hi all,
As a hotspot functionality I would like to open a new transaction in a new session with the value at hotspot. For that reason, I am using the FM ABAP4_CALL_TRANSACTION with the option STARTING NEW TASK.
This FM is not working because Parameter ID is not Maintained for the field (Hotspoted). So no value is passing to new transaction.
Please suggest any other way to implement this.
ThanksHi Anil..
This is the Solution for ur Requirement. try this program and change as per ur need.
REPORT ZSEL_CALL_TCODE.
data : IT_KNA1 TYPE TABLE OF KNA1 WITH HEADER LINE.
DATA : IT_SPA TYPE TABLE OF RFC_SPAGPA WITH HEADER LINE.
SELECT * FROM KNA1 INTO TABLE IT_KNA1 .
LOOP AT IT_KNA1 .
WRITE:/ IT_KNA1-KUNNR HOTSPOT ON.
HIDE IT_KNA1-KUNNR .
ENDLOOP.
CLEAR IT_KNA1-KUNNR.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN 1.
IF IT_KNA1-KUNNR IS NOT INITIAL.
REFRESH IT_SPA.
IT_SPA-PARID = 'KUN'.
IT_SPA-PARVAL = IT_KNA1-KUNNR.
APPEND IT_SPA.
CALL FUNCTION 'ABAP4_CALL_TRANSACTION' STARTING NEW TASK 'S1'
EXPORTING
TCODE = 'XD02'
SKIP_SCREEN = ' '
MODE_VAL = 'A'
UPDATE_VAL = 'A'
IMPORTING
SUBRC =
TABLES
USING_TAB =
SPAGPA_TAB = IT_SPA
MESS_TAB =
EXCEPTIONS
CALL_TRANSACTION_DENIED = 1
TCODE_INVALID = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDCASE.
<b>Reward if Helpful.</b> -
How can I have two fields with the same name if it makes sense?
Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(
-
If i cancel an account can I create a new one with the same e-mail address?
I made an account with Game Center and I wanted to use it to get some free apps on the iTunes Store. When I tried to sign in on iTunes (for Windows) it said I had to review my details. I didn't have a credit card so I couldn't complete it and there wasn't any option for no credit card.
I wondered if I could cancel my account and create a new one with the same e-mail address. There was a discussion that you could create a new account on the iTunes Store and have the choice to not have a credit card.
Any help will help!
SuperHoopsNo, it does not, not if the creation of the Apple ID was completed, which unless you are referring to a different Apple ID I presume it did since you are posting here. And once created, you can't get apps without providing a payment method; setting up for just free apps requires a very specific procedure or a payment method is necessary. Creating an account via Game Center does not work.
If you can create a new email address (Gmail or Yahoo mail will work), take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
Regards. -
How to Add a new fields in the selection screen of LDB.
Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
RoliHi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji -
Adding a new field to the search help exit
Hi friends,
adding a new field to the search help exit. How does it work ?
Thanks in advace
IlhanThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop. -
Adding a new field to the Address Data for a business partner
Hi Experts,
I am trying to add a new custom field to the address data (all structures and tables) that is linked to a business partner on SAP CRM via EEWB. Structure is the address structure wthin BUS_EI_EXTERN. Table is BUT020. I have been told that it is not possible as there is no Business Object that allows this. When doing an EEWB, the only business object is BUPA, which when selected, adds the new custom field to BUT000. I would like the field to be added to BUT020 (Address Table). This leads me to believe that there is no standard way of doing this, which ultimatley means that it would need to be done manually. Please help me with this predicament.
Regards
YusufThe search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
read table shlp-fielddescr into wa_shlp
with key tabname = 'M_PREMN'
fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
select orgeh endda
up to 1 rows
from pa0001
into (ld_orgeh,ld_endda)
where pernr eq record_tab-string+wa_shlp-offset(8)
u201Cpernr length is 8
order by endda descending.
endselect.
select single orgtx
from t527x
into ld_orgtxt
where orgeh eq ld_orgeh and
sprsl eq sy-langu and
( endda ge sy-datum and
begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.
Maybe you are looking for
-
Add-on page won't open - want to enable and enable flash player
The Firefox Ad-ons page will not open - it goes into an eternal cycle. I used to open it regularly to enable and disable the flash player - now I can't do this.
-
I explained to Kavitha from the iTunes Store Customer Support the following information: - my home country is Canada - I am an English speaker - I currently live in China, but I don't read or speak Chinese - my Apple ID was created in Canada - my hus
-
I am purchasing a new iMac and I am keeping my old 17" MacBook Pro (it's 4 years old). Right now I am keeping my iTunes on an external HDD. I have it connected to my MacBook Pro via firewire 800. The reason I originally put iTunes on the external HDD
-
How compatible is the iPad's keyboard with the iPad2?
Most of the reviews for the keyboard have been great - but I've noticed there's been one review that says that the keyboard could possibly damage the iPad2. Has anyone tried using the keyboard and if so - have you noticed any damage to it?
-
Toshiba 46G310U random power off/ power on
My Toshiba 46G310U was about 1.5 years old when it began the random power off/power on problem. Interruptions varied between 20 min to several hours. Found this forum when looking to see if Toshiba might have issued a recall or declared a way to fi