CRM 2015 Custoemr Main Grid Fancy tooltip solution/script

In CRM 4.0, At Customer Main Grid has option to popup some address details like below.
Does any one know In CRM 2015, How to enable this option or is there any Add-On/Plugin/Solution out there to enable this sort of pop up windows with few column details at Customer grid?? Technically we can inject JavaScript function to pop up tooltip
with nice windows on Mouse hover event on Customer Grid, but curious, if any one have done that or any article/link for this??
Thanks,
Nick

Similar Messages

CRM 2015 Customer Main Grid Fancy

0
In CRM 4.0, At Customer Main Grid has option to popup some address details like below.
Does any one know In CRM 2015, How to enable this option or is there any Add-On/Plugin/Solution out there to enable this sort of pop up windows with few column details at Customer grid?? Technically we can inject JavaScript function to pop up tooltip
with nice windows on Mouse hover event on Customer Grid, but curious, if any one have done that or any article/link for this??
Thanks,
Nick

0
In CRM 4.0, At Customer Main Grid has option to popup some address details like below.
Does any one know In CRM 2015, How to enable this option or is there any Add-On/Plugin/Solution out there to enable this sort of pop up windows with few column details at Customer grid?? Technically we can inject JavaScript function to pop up tooltip
with nice windows on Mouse hover event on Customer Grid, but curious, if any one have done that or any article/link for this??
Thanks,
Nick

Flitered Sub-grid in Online CRM 2015

Hi all ,
   I have the following requirement. In Case form we included multiple sub-grids (Opportunity,Lead, etc..). On selecting the value in customer field, only the related records of that particular Customer should flow in the
respective sub-grids.
The same functionality we worked in CRM 2013 which was working fine. At present in CRM 2015 on loading the form some times it is working & some times it is not working (means some times it shows related record & some times it shows all records).
Unable to identify the issue. We have also tried by refreshing the sub-grid twice in J-script.
Any solution?
Thanks & Regards
Shankar

Hi Polat,
Thanks for your reply. We have done the same work. Please find below Jscript we have used, which is working fine in CRM 2013. In CRM 2015 some times it works & some times it shows all the records with out filter. So any other solution for
this issue.
function BindGridSubscription() {
    // Get Customer
    var lookupfield = new Array;
    lookupfield = Xrm.Page.getAttribute("customerid").getValue();
    if (lookupfield != null) {
        var lookupid = lookupfield[0].id;
    else {
        return;
    var relatedSubscriptions = null;
    relatedSubscriptions = document.getElementById('sgvSubscriptionDetails');
    if (relatedSubscriptions == null || relatedSubscriptions.readyState != "complete") {
        setTimeout('BindGridSubscription()', 2000);
        return;
    var fetchXmlSubs = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'>";
    fetchXmlSubs += "<entity name='opportunity'>";
    fetchXmlSubs += "<attribute name='opportunityid' />";
    fetchXmlSubs += "<attribute name='tec_zone' />";
    fetchXmlSubs += "<attribute name='totalamount' />";
    fetchXmlSubs += "<attribute name='tec_subscriptiontype' />";
    fetchXmlSubs += "<attribute name='tec_copystartdate' />";
    fetchXmlSubs += "<attribute name='tec_copyenddate' />";
    fetchXmlSubs += "<attribute name='tec_subscribedscheme' />";
    fetchXmlSubs += "<attribute name='tec_subscribedproduct' />";
    fetchXmlSubs += "<attribute name='tec_schemestartdate' />";
    fetchXmlSubs += "<attribute name='tec_schemeenddate' />";
    fetchXmlSubs += "<attribute name='tec_poimplementationdate' />";
    fetchXmlSubs += "<attribute name='tec_bookingformnumber' />";
    fetchXmlSubs += "<attribute name='tec_bookingdate' />";
    fetchXmlSubs += "<order attribute='tec_zone' descending='false' />";
    fetchXmlSubs += "<filter type='and'>";
    fetchXmlSubs += "<condition attribute='customerid' operator='eq' uitype='contact' value='" + lookupid + "' />";
    fetchXmlSubs += "</filter>";
    fetchXmlSubs += "</entity>";
    fetchXmlSubs += "</fetch>";
    relatedSubscriptions.control.SetParameter("fetchXML", fetchXmlSubs);
    relatedSubscriptions.control.Refresh();
Thanks
Shankar

Import Solution from CRM 2015 online to CRM 2015 on premise faild Error: {1}{0}

Hi,
i was trying to import a solution into a crm 2015 on premise System which I've exported from a crm online system (also CRM 2015 without the last Update).
On the crm server I do have Administrators rights.
When I try to Import the solution I get the erro Message
error: {1}{0}
Does anybody know, how I can get the information why this error occures?
Greeting Ferdinand

Hello,
Try looking for the specific error in the CRM Trace folder.
To enable tracing, please read
this post.
Cornel Croitoriu - Senior Software Developer
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

Dynamics CRM 2015 Install requires Active Directory on VM Windows 2012 R2 Server

Hello,
I'm trying to install Dynamics CRM 2015 on a standalone VM not connected to a domain (it's running under WIndows 8.1 Professional). The VM was configured using WIndows Server 2012 R2. I'm getting an error message shortly into the install process stating
it needs to access Active Directory.
How can I get around this issue - I just want to Install this CRM on the VM without getting into complicate network/AD issues.
Can you please advise ?
SO many thanks,
John

CRM requires AD no way around that so the most likely solution is to install it on that server or on a VM not connected to your other networks
Jason Lattimer
My Blog - Follow me on Twitter - LinkedIn

CRM 2015 Outlook Plugin and SCCM 2012

Good Morning!
In need of some assistance from you more experienced SCCM admins. Let me quickly run down the steps of what I've done:
1) Created a network share for CRM 2015 that everyone can see
2) Ran the EXE from Microsoft and followed the instructions from them to create the CrmClient_32.msi
3) In SCCM, created a new application, and linked the shared folder. SCCM auto-populated the install command, publisher data, etc. The only thing I added was "/s" for the MSI package to install
4) Created a Device Collection with one test PC that already has CRM 2013 installed
5) Deployed the application to the device collection with the following options:
Under Content Tab:
Content Location: \\networkshare\Installs\CRM2015
Persist content in the client cache is NOT checked
Allow clients to share content with other clients on the same subnet IS checked
Deployment options: Do not download content
Under the Programs Tab:
Installation program: msiexec /i /s "CrmClient_32.msi"
Installation start in: blank
Uninstall program: msiexec /x
Run installation and uninstall program as 32-bit process on 64-bit clients IS checked
Under User Experience Tab:
Installation Behavior: Install for system
Logon requirement: Whether or not a user is logged on
Installation program "margin-bottom:9px;padding-right:0px;padding-font-family:Arial, Helvetica, sans-serif;font-size:14px;line-height:21px;word-wrap:break-word;color:#333333;">Maximum allowed run time ( 120 minutes)
Estimated installation time (0 minutes)
6) I schedule the install (for most applications I've seen this works best)
Now when I go to Monitoring, all I see is the deployment is "In Progress" and the category is "Waiting for content"
I'm frustrated because I don't understand why this won't work. It seems so painless and the method I've described above works for almost any other application I've pushed out.
I'm all ears - is there anything you see that isn't correct? Any ideas or suggestions? If you've successfully pushed out CRM 2015 some how (even if it's not through SCCM), could you please share your solution?
Thank you so much! -Nick

Hi,
In need of some assistance from you more experienced SCCM admins
Since we are not familiar with SCCM, please refer to SCCM forums below to get more professional support:
https://social.technet.microsoft.com/Forums/en-US/home?category=configurationmanager&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

CRM 2015 Online, E-mail router performs so slow

Hi,
We are testing staging CRM 2015 Online. Email router for 2015 is installed in an online Windows 2012 server. We set Polling Period(seconds) 60 in Email Router Configuration Manager. However, when I send an e-mail, it takes
more than 20 minutes for the e-mail to arrive in my Gmail Inbox. Checking System Jobs and views regarding sent e-mail, all indicates that the e-mail was sent instantly. What shall I do to improve the Email Router performance? Thanks.

Why are you using the email router if your Exchange Server is also Online? Dynamics CRM Online has Server Sync built in so it will directly communicate to Exchange Online. Much better solution than rolling up an email Router.
Also, if you don't have access to the Exchange server, I' doubt there's much you can do, since you don't have all the tools you need to troubleshoot the issue.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

MS CRM 2015 Adding Custom RIbbon button in dashboard and Changing Colors

Hi,
I am Looking for customization in MS Dynamics CRM 2015 and want to Add Custom Ribbon button in dashboard and Changing Colors of that ribbon using customization.xml i am new to crm 2015 and only know how to import export solutions.
Regards
Irfan

Hello Irfan,
For adding a custom button please refer this blog
https://community.dynamics.com/crm/b/aeonnexuscrm/archive/2014/10/21/ms-crm-2013-adding-custom-ribbon-button-in-dashboard.aspx
And for changing colors in Chart
https://crmchartguy.wordpress.com/2012/08/23/palette-custom-colors-in-charts/
Hope this helps!
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

How to migrate waiting stage workflows in ms crm 2015

Hi,
We are migrating the data from ms crm 2011 on-premise to ms crm 2015 on-line.
So how to migrate the ms crm 2011 on-premise waiting stage workflows to crm 2015 on-line?
Is there anyway to migrate these workflows or workaround? Please suggest
Its very urgent.
Thanks,
Yadav
Yadav

Hello Yadav,
If you want to migrate from CRM 2011 on premise to CRM 2015 online, unfortunately this is not possible in single step. You would have to first upgrade to CRM 2013 and then only you can upgarde to CRM 2015.
CRM 2011 -> CRM 2013 SP1 -> CRM 2015
Refer https://technet.microsoft.com/en-us/library/hh699673.aspx
For On Premise to Online migration, all customizations has to be exported through a solution. And if your database is big you need to plan your migration using a DM tool like scribe.
Now coming on to your original question, the answer is if you just migrate database, everything will be in same state as it was earlier in your old environment, and will continue the same way. The records for which workflow are in waiting state or in progress
will be resumed again automatically once the migration is completed, if you will stop "CRM Aynchronous Service" then all workflows will be in waiting state so when you will resume the service again then the system will resume those workflows again.
Regards, Abhishek Bakshi If you find this post helpful then please Vote as Helpful and Mark As Answer. Check my blog on https://mydynamicscrmblog.wordpress.com/

Dynamics crm 2015 import fail entity ribbon XML data that represents the customized elements of the ribbon for an enitity" error.

while import the solution into dynamics crm 2015.import fail is getting.could anybody help me on this.
hsk srinivas

Hello,
I believe first step is to Download Log File and recheck it for error.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

CRM 2015 on IFD

Hello
I'm setting up a CRM 2015 Deployment configure to work on IFD, i need to know if the domain on the CRM and ADFS server and SQL Server can be ourorg.local or it's imperative that the domain is ourorg.com?
Thanks

.local can never be internet-facing. It's local-only. You must have a public URL to make IFD work. Same with the certificate for said domain. It doesn't have to be .com, it could be .org, .cc or any other TLD, but it does have to
be a publicly-registered one.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

Can CRM 2015 Online use the CRM 2013 Email Router?

We are trying to plan our upgrade to CRM 2015 Online from CRM 2013 Online. We currently use the CRM 2013 Email Router and want to know if we need to upgrade the email router immediately after the CRM server is upgraded or if we could wait a short period
of time. I searched but could not find any information on the Email Router compatibility. Does anyone have any information?

Why are you using the email router if your Exchange Server is also Online? Dynamics CRM Online has Server Sync built in so it will directly communicate to Exchange Online. Much better solution than rolling up an email Router.
Also, if you don't have access to the Exchange server, I' doubt there's much you can do, since you don't have all the tools you need to troubleshoot the issue.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

CRM 2015 to CRM 2013

Hi All ,
Is it possible to push CRM 2015 solution to CRM 2013 instance ?
is there any way around ?
Kindly help me on this , Thanks in Advance.
With Regards Athul MT http://www.athulmt.blogspot.in/

Hello,
No, there is no easy way of doing it.
Dynamics CRM MVP/ Technical Evangelist at
SlickData LLC
My blog

CRM 2015 + IFD Error when i add new User

Hi all member,
I have a CRM 2015 Server on-premise after installing and configuring IFD + ADFS, when i want to add a new user i have this error :
InnerException: System.DirectoryServices.DirectoryServicesCOMException (0x80072032): An invalid DN syntax was specified.
When i check my Server CRM an Server ADFS i found that each server has a LogonServer :
CRM SERVER ===== LOGONSERVER=\\MMV2K5-LDC
ADFS SERVER ===== LOGONSERVER=\\C55V2K5-LDC
how to enable the CRM to point directly to my AD when i want to add a single user.
How to fix this. Any help pls
Regards,

Here's the solution for the T-string error.
http://iweb.dailynews.webege.com/PHP_parse_error.html

Question on CRM 2015 on-premise features (U.K. version)

Hi All,
Does the new on premise version of the CRM 2015 come with an in-built Marketing system which records delivery stats such as email opens, click thrus etc. or is this somthing contained in a plug-in or something you have to subscribe to? I ask because we are
about to install a third party email marketing system into CRM and I can't see how the CRM 2015 can capture this level of detail unless Microsoft were sending the emails on our behalf through some sort of cloud service? We currently use CRM 2011 and i do recall
that landing pages were available in the US on-premise version but not the UK on-premise version so I am aware that differences can exist between versions.
Any advice would be greatly appreciated.
Thanks
David
David Kelly

No, that is a separate product called Dynamics Marketing. It's not part of CRM. You can add tools like ClickDimensions to CRM to handle that for you if you as well.
also, landing pages have been entirely removed form Dynamics CRM.
The postings on this site are solely my own and do not represent or constitute Hitachi Solutions' positions, views, strategies or opinions.

CRM 2015 Custoemr Main Grid Fancy tooltip solution/script

Similar Messages

Maybe you are looking for