CRM Availability Check not working for certain Item Category

Hi there,
I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
The check is set up to happen in SAP ECC.
I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
as per many SDN posts on this, and everything looks fine.
The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
If I create the same order directly in ECC, it works correctly every time.
I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
Any suggestions on where else this could be configured would be appreciated!
thanks,
David

Hi David,
One 'simple' reason for this could be that the copied item category does not have the
ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
Please see as well the SCN Wiki link:
Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
Best regards
Christophe

Similar Messages

Availability Check not working for Item Cat TANN or YG05 in Btch Split

Currently working on implementing Automatic Batch Determination (BD) project and one fine piece is holding up the implementation (make or break for project).
In our QA System:
- In inventory we have a quantity of 2 for a material: 1 in one batch and 1 in another batch.
- Create an order with 2 line items with the same material number for a quantity of 1 each. Line item category is TANN
- When you generate the delivery the batch determination causes the items to split (even though you have a quantity of 1 in the line item).
- When you go into the delivery and open up the 1st line item and look at the 900001 line, BD chooses the 1st batch for a quantity of 1. Line item category is YG05.
- When you open up the 2nd line item and look at the 900002 line, BD chooses the 1st batch again, NOT the 2nd batch which it should.
If I change the line item category on the Sales Order to TAN and generate the delivery, BD correctly assigns the 1st batch to the 900001 line item and the 2nd batch to the 900002 line item. Which is correct.
Now for the strange part. The TANN item category and BD works find in our DEV Sandbox, but NOT in our QAS system.
I have spent two days now trying to find out where Availability Check is assigned specifically to Item Categories and any differences between our DEV Sandbox and our QA systems to no avail.
Our customers need the ability to be able to put the same material number on multiple lines of a sales order due to special pricing per customer within an order.
Can anyone direct me to some configuration or transaction that controls Availability Checking by Item Category. I have checked the 0VLP transaction and they are identical between our DEV and QA system for the TANN and YG05 categories.
Any help will be greatly appreciated.

In VOV6 the 'CP' Schedule Line Cat. has the Availability flag check. There were a few areas where I found an "Availability" flag and made sure there were all set.
But, I did finally find out what the error was:
Logistics Exec -> Shipping -> Basic Shipping Functions -> Avail Check and Transfer of Requirements -> Transfer of Requirements -> Determination Of Requirement Types Using Transactions
There are entries by Item Category. For
I/C = TANN
MRP type = PD
the Requirement Type was missing (if you look at the entry for TAN/PD you see an 11 in the RqTy column).
So I entered a 11 (Delivery Requirement) into the field and now the Availability Check works and I am getting the correct Batches and quantities during Batch Determination.
There is no entry for the YG05 batch split, so I guess the system just uses the Item Category of the main line item.
Thanks for the responses. Sorry to bother you I should have figured this out earlier.
Scott.

SD- Sales Order - ATP check not working for few item in same sales order

Hi Experts,
Need help we activated ATP check but for few item i could not find confirmation qty after availability check. In same SO out of 4 items for schedule line it confirming qty for 2 item but it's not confirming for remaining 2 items though stock is available. Please guide me how to correst and what need to check.
Manoj

Dear Manoj,
As you know, ATP is a big subject & some times its difficult to point the exact problem.
In your case, I suggest you to execute the function module:BAPI_MATERIAL_AVAILABILITY using Tx:SE37
key in selection criteria , in results check the "ATPQTY"- it will show you how much actual stock is available for use i.e. ATP qtty.
still if you find the availability & system not confirming the qtty, then problem could be in checking rule
Tx:OVZ9 check in relevant combination, whether you are considering RLT or not?
is this case with MTS or MTO
because in Sales order -
for MTS - checking rule "A" & MTO checking rule will be "AE"
Regards,
Reazuddin MD

Calendar Issues - "Repitition is not working for the item you tried to access"

I ran into an interesting error when troubleshooting a calendar issue today, wondering if anyone has seen it.
Exchange 2010 SP2 latest RU, Outlook 2010
User changes then start time for a recurring meeting, changes in everybody's calendar but hers 9still shows in her calednar as the original start time)
Logged into OWA to see if her claendar reflected the correct start time there - no, still shows the old start time. So I open the meeting, have a quick look, and the following error pops up:
"Repitition is not working for the item you tried to access. It's possible either the start or end date are not correct"
Has anyone seen this error in OWA before?
TAG

Hi,
Please double check whether the updated start time and end time are changed properly in attendees’ calendar. Also confirm whether the updating message is in the organizer’s sent items both in OWA and Outlook.
Thanks,
Winnie Liang
TechNet Community Support

Requested auto spell check not worked for months - gmail uses Firefox's

Tools Advanced setting is on auto spell check but has not worked for months - yes it had worked, probably for years. Looking at gmail for an auto spell checker I see that it leaves that to one's browser - Firefox.

Your More system details list doesn't show the en-GB dictionary.
If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
Also make sure that [X]"Check Spelling" in the right-click context menu has a tick.<br />
You can also try to toggle the "Check Spelling" item off and on again.
See:
* http://kb.mozillazine.org/Spell_checking
* http://kb.mozillazine.org/Dictionaries
You can look here for more dictionaries:
* https://addons.mozilla.org/firefox/language-tools/

Additional Fields for ESS-Business Card Not Working for Certain Countries

Dear Experts,
We were trying to configure the additional fields to be displayed in Business Card - Overview Screen for all countries. We don't have problem configure and get the new fields display for Malaysia (Molga = 14) but having problem for the field to display for Hong Kong (Molga = 27) and Singapore (Molga - 25).
The strange thing is I am following the same steps as I configured for Malaysia. Somehow it is not working for Hong Kong and Singapore. As I understand, there is only 1 place to configure in SPRO for this requirement:
Personnel Management -> Employee Self-Service -> Service-Specific Settings -> Own Data -> Customizing of Personal Information Screens -> Determine Fields for Business Card on Overview Screen
Please help!

Hi Siddhart,
Thank you for the information. We are currently in EhP3 with below Support Components installed.
Software Component: SAP_HR
Release: 600
Level: 60
Highest Support Package: SAPKE60060
Software Component: EA-HR
Release: 603
Level: 34
Highest Support Package: SAPK-60334INEAHR
The note 1159911 provided is within SAPK-60304INEAHR. Thus, I don't think this is the root cause of this inconsistency base on the Highest Support Package installed in our system.
Anymore hint? Anyone? Please...

Export to powerpoint not working for certain views

Hi All,
I am in the process of implementation of STVN 2.1 Pre EHP3 version of Nakisa OrgChart for one of my clients.
During testing, it is observed that export to powerpoint object is not working for the following views.
1. Condensed Org. Chart
2. Compressed OrgChart -Only works when we expand at least one position
3. Horizontal OrgChart - Condensed children-Only works when we expand at least one position
In all the other views the export to Powerpoint object are working fine.
Export of powerpoint image is working in all the scenarios. We are facing issue only with powerpoint object.
I have implemented Export Pack 3.0 for OrgChart.
J. Thomas

Hi Luke,
Thanks for the response.
Yes...I have installed SP1.0. I have also applied Export Pack 3.0.
The following features are working fine.
1) Export to PDF
2) Export to JPEG
3) Export to Powerpoint Image.
Export to Powerpoint Object is also working fine if the style is 'Vertical'. The issue is only in case of 'Condensed', 'Compressed' and 'Horizontal OrgChart - Condensed children' sytles. Here again, if we expand at least one position, the export is working.
The error message that is flashed for the user is the usual one....pasted below.
Object Variable or With Blovk Variable Not Set.
Export To PowerPoint
Compatibility
We currently support:
Microsoft PowerPoint 2000 / 2002
Microsoft PowerPoint 2003
Note: To ensure compatability, you may be prompted to install "Service Pack 6 for Visual Basic Runtime." If so, you must accept the installation and once installed it may ask for a system reboot which you may ignore.
ActiveX Security
Depending on your browser settings, you may be prompted to install 'Nakisa Office Components.cab'. This is our ActiveX component that will allow you to use our Exporting functionality.
You may also be prompted to allow the ActiveX to run. If so, you must select 'Yes' to continue.
Note: If you are not prompted and the export fails to occur, please verify your Microsoft Office installation and verify your browser's ActiveX settings are set to 'Enable' or 'Prompt'.
In the log file, the following error message is displayed.
ERROR: ChartingXMLProcessor : generateLayoutXML : Unexpected XML declaration. The XML declaration must be the first node in the document, and no white space characters are allowed to appear before it. Line 1, position 5081.
Warm regards,
J. Thomas

Why does clicking the reload icon and F5 key not work for certain pages. Thanks in advance. Any help is appreciated. :)

Cliffs:
-Open new tabs from original page.
-Clicking reload icon or hitting F5 will not work on new tabs, but works on original page.
-Can "right click" reload tab or all tabs, but reload icon and F5 won't work.
-Been using FF3.6 for months, never a problem. Just started happening 2 days ago. Updated to FF4, but problem still remains.

bump.

Sql server 2012 Logon trigger not working for certain logins

Hello. I created a login trigger to insert data for each login in a table, and it works for all logins except one that is format domain\login
and the login ends with the dollar sign(actual name is domain\CTXDEVDCSI1$).
I had been using varchar, but after reading other forum posts, I changed the varchar's to nvarchar's, but it still fails for that id.
The errors written to the sql server error log were the usual "login failed due to trigger execution".
I had granted insert on the rvvlogindata table in dsa to public, and only one id wasn't able to login after that.
Any suggestions would be much appreciated!
Here's the modified table ddl:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[rvvlogindata](
[sessionId] [int] NULL,
[LoginTime] [datetime] NULL,
[HostName] [nvarchar](50) NULL,
[ProgramName] [nvarchar](300) NULL,
[LoginName] [nvarchar](50) NULL,
[ClientHost] [nvarchar](50) NULL
) ON [PRIMARY]
GO
Here's the logon trigger code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
create trigger [LOGIN_IP_RESTRICTION] on all server for logon
as
Begin
Declare @LogonTriggerData xml,
@EventTime datetime,
@LoginName nvarchar(50),
@ClientHost nvarchar(50),
@HostName nvarchar(50),
@AppName nvarchar(300)
Set @LogonTriggerData = eventdata()
set @EventTime = @LogonTriggerData.value('(/EVENT_INSTANCE/PostTime)[1]', 'datetime')
set @LoginName = @LogonTriggerData.value('(/EVENT_INSTANCE/LoginName)[1]', 'varchar(50)')
set @ClientHost = @LogonTriggerData.value('(/EVENT_INSTANCE/ClientHost)[1]', 'varchar(50)')
set @HostName = HOST_NAME()
set @AppName = APP_NAME()
insert into dsa.dbo.rvvlogindata
sessionId,
LoginTime,
HostName,
ProgramName,
LoginName,
ClientHost
select @@spid,
@EventTime,
convert(nvarchar(50),@HostName),
convert(nvarchar(300),@AppName),
convert(nvarchar(50),@LoginName),
convert(nvarchar(50),@ClientHost)
END
GO
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
ENABLE TRIGGER [LOGIN_IP_RESTRICTION] ON ALL SERVER
GO

Erland, I wanted to add more info to my reply earlier today.
sp_who2 showed no blocking, activity monitor from my local PC SSMS showed no major waits or high i/o or cpu activity.
I was wondering if you have any suggestions on how to find out what was the cause of the 5+ minute wait for SSMS on the remote desktop to respond and fully come up.
I definitely can't put this in production with this hanging delay possibly occurring there.
I was connecting as read_user when it hung.
sp_who2 output at the time was:
1    BACKGROUND                    sa   .   . NULL LOG WRITER      54631 0 04/10
06:59:43
1    0
2    BACKGROUND                    sa   .   . NULL RECOVERY WRITER 8673 0 04/10 06:59:43
2    0
3    BACKGROUND                    sa   .   . NULL LAZY WRITER     300691 0 04/10
06:59:43
3    0
4    BACKGROUND                    sa   .   . NULL RESOURCE MONITOR 1207010 0 04/10 06:59:43
4    0
5    BACKGROUND                    sa   .   . NULL XE TIMER        38828 0 04/10
06:59:43
5    0
6    BACKGROUND                    sa   .   . NULL XE DISPATCHER   1404 0 04/10
06:59:43
6    0
7    BACKGROUND                    sa   .   . master SIGNAL HANDLER 0 0 04/10 06:59:43
7    0
8    BACKGROUND                    sa   .   . NULL LOCK MONITOR    179978 0 04/10
06:59:43
8    0
9    sleeping                      sa   .   . master TASK MANAGER    0 11 04/21
08:37:04
9    0
10   sleeping                      sa   .   . master TASK MANAGER    0 0 04/10
06:59:44
10   0
11   BACKGROUND                    sa   .   . master TRACE QUEUE TASK 546 0 04/10 06:59:44
11   0
12   BACKGROUND                    sa   .   . NULL SYSTEM_HEALTH_MO 4930 0 04/10 06:59:44
12   0
13   BACKGROUND                    sa   .   . NULL RECEIVE         422 0 04/10
06:59:45
13   0
14   BACKGROUND                    sa   .   . master CHECKPOINT      79137 31811 04/10
06:59:46
14   0
15   BACKGROUND                    sa   .   . master TASK MANAGER    1606 0 04/10
06:59:46
15   0
16   BACKGROUND                    sa   .   . NULL UNKNOWN TOKEN   0 0 04/10 06:59:46
16   0
17   sleeping                      sa   .   . master TASK MANAGER    0 74 04/21
08:37:04
17   0
18   sleeping                      sa   .   . master TASK MANAGER    0 0 04/21
08:18:49
18   0
19   sleeping                      sa   .   . master TASK MANAGER    0 0 04/21
08:30:29
19   0
20   sleeping                      sa   .   . master TASK MANAGER    0 1 04/21
08:37:14
20   0
21   sleeping                      sa   .   . master TASK MANAGER    0 7 04/21
08:30:59
21   0
22   sleeping                      sa   .   . master TASK MANAGER    16 4 04/21
08:37:44
22   0
23   sleeping                      sa   .   . master TASK MANAGER    0 15 04/21
08:39:24
23   0
25   BACKGROUND                    sa   .   . master BRKR EVENT HNDLR 0 95 04/10 06:59:48
25   0
30   BACKGROUND                    sa   .   . master BRKR TASK       0 0 04/10
06:59:48
30   0
31   BACKGROUND                    sa   .   . master BRKR TASK       16926 0 04/10
06:59:48
31   0
32   BACKGROUND                    sa   .   . master BRKR TASK       0 0 04/10
06:59:48
32   0
34   BACKGROUND                    sa   .   . master BRKR TASK       10701 0 04/10
06:59:48
34   0
51   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
03:16:56
51   0
52   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
52   0
53   sleeping                      NT AUTHORITY\SYSTEM SQLDEV2012      . msdb AWAITING COMMAND 0 0 04/10
06:59:58 SQLAgent - Email Logger                       53   0
54   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:51 Citrix:Broker#1                               54   0
55   sleeping                      edit_user ASDEV1          . dsa AWAITING
COMMAND 0 0 04/21 08:55:27 jTDS
55   0
56   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
56   0
57   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
57   0
58   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
58   0
59   sleeping                      NT AUTHORITY\SYSTEM SQLDEV2012      . msdb AWAITING COMMAND 124 242 04/10
06:59:59 SQLAgent - Generic Refresher                  59   0
60   sleeping                      NT AUTHORITY\SYSTEM SQLDEV2012      . msdb AWAITING COMMAND 2790 1160 04/21
08:55:00 SQLAgent - Job invocation engine              60   0
61   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
61   0
62   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
62   0
63   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
63   0
64   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
64   0
65   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
65   0
66   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
03:16:56
66   0
67   sleeping                      reports_adm REPORTSDEVSI2   . JBOSS_Cluster_CRServer2011 AWAITING COMMAND 0 0 04/21
08:52:12 jTDS
67   0
68   sleeping                      edit_user DCMA10685       . dsa AWAITING COMMAND 0 0 04/21
08:56:47 jTDS
68   0
69   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:49 Citrix:Configuration                          69   0
70   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 1794 7120 04/21
08:51:37 Microsoft SQL Server Management Studio        70   0
71   sleeping                      xsp_user XSPDEVSI2       . xspv5 AWAITING COMMAND 0 0 04/21
08:58:52 .Net SqlClient Data Provider                  71   0
72   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:56:01 Citrix:Monitor                                72   0
73   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:30 Citrix:Monitor                                73   0
74   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 16 2 04/21
08:53:37 Microsoft SQL Server Management Studio - Query 74   0
75   sleeping                      rvanveen DCMA8460        . loginaudit AWAITING COMMAND 0 22 04/21
08:50:29 Microsoft SQL Server Management Studio - Query 75   0
76   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:07
76   0
77   sleeping                      adm_jbossportal ASDEV1          . jbossportal AWAITING
COMMAND 0 0 04/21 08:40:27 jTDS
77   0
78   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 110 542 04/21
08:46:17 Microsoft SQL Server Management Studio - Query 78   0
79   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
79   0
80   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:54 Citrix:MachineCreation                        80   0
81   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
08:08:29
81   0
82   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:02:13
82   0
83   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:02:15
83   0
84   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:44 Citrix:Monitor                                84   0
85   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:11:05
85   0
86   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:53 Citrix:AdIdentity                             86   0
87   sleeping                      DAIWA_USA\admsql SQLDEV2012      . master AWAITING COMMAND 15 2 04/21
08:56:20 Microsoft SQL Server Management Studio - Query 87   0
88   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:36 Citrix:SiteServices                           88   0
89   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:42 Citrix:Host                                   89   0
90   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:47 Citrix:ConfigurationLogging                   90   0
91   RUNNABLE                      rvanveen DCMA8460        . master SELECT INTO
15 51 04/21 08:58:46 Microsoft SQL Server Management Studio - Query 91   0
92   sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 63 30 04/21
08:52:34 Microsoft SQL Server Management Studio - Query 92   0
94   sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:53 Citrix:DelegatedAdmin                         94   0
95   sleeping                      DAIWA_USA\admsql SQLDEV2012      . loginaudit AWAITING COMMAND 173 27 04/21
08:56:10 Microsoft SQL Server Management Studio        95   0
96   sleeping                      xsp_user XSPDEVSI2       . xspv5 AWAITING COMMAND 0 0 04/21
08:58:33 .Net SqlClient Data Provider                  96   0
97   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
08:10:07
97   0
98   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 31 38 04/21
08:00:31
98   0
99   sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
08:10:12
99   0
100 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 282 04/21
08:10:14
100 0
101 sleeping                      DAIWA_USA\admsql SQLDEV2012      . master AWAITING COMMAND 0 8 04/21
08:56:50 Microsoft SQL Server Management Studio        101 0
102 sleeping                      DAIWA_USA\admsql SQLDEV2012      . master AWAITING COMMAND 31 0 04/21
08:54:57 Microsoft SQL Server Management Studio        102 0
103 sleeping                      read_user SQLDEV2012      . master AWAITING COMMAND 0 8 04/21
08:57:09 Microsoft SQL Server Management Studio        103 0
104 sleeping                      read_user SQLDEV2012      . dsa AWAITING COMMAND 0 0 04/21
08:57:09 Microsoft SQL Server Management Studio        104 0
105 sleeping                      rvanveen DCMA8460        . tempdb AWAITING COMMAND 8875 336 04/21
08:58:54 Microsoft SQL Server Management Studio        105 0
106 sleeping                      read_user SQLDEV2012      . master AWAITING COMMAND 16 0 04/21
08:57:39 Microsoft SQL Server Management Studio        106 0
107 sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:47 Citrix:EnvTest                                107 0
108 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 2200 8514 04/21
08:00:31
108 0
109 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
109 0
110 sleeping                      rvanveen DCMA8460        . master AWAITING COMMAND 0 0 04/21
08:58:48 Microsoft SQL Server Management Studio        110 0
113 sleeping                      Citrix_adm CTXDEVSI1       . XenApp6 AWAITING COMMAND 284 777 04/21
08:51:33 Citrix IMA                                    113 0
119 sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:42 Citrix:ConfigurationLoggingData               119 0
120 sleeping                      AMERICAS\CTXDEVDCSI1$ CTXDEVDCSI1    . CitrixXDFarm1 AWAITING COMMAND 0 0 04/21
08:58:26 Citrix:Storefront                             120 0
125 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/16
13:55:16
125 0
126 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 16 0 04/16
11:25:30
126 0
131 sleeping                      echouliak DCMA10685       . master AWAITING COMMAND 139 8 04/14
15:26:55 Microsoft SQL Server Management Studio        131 0
135 sleeping                      echouliak DCMA10685       . dsa AWAITING COMMAND 0 0 04/14
15:24:52 Microsoft SQL Server Management Studio - Query 135 0
136 sleeping                      echouliak DCMA10685       . dsa AWAITING COMMAND 0 0 04/14
15:00:17 Microsoft SQL Server Management Studio - Query 136 0
140 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
140 0
145 sleeping                      edit_user INFADEVFS2      . dsa AWAITING COMMAND 0 0 04/21
07:05:56
145 0

Keyboard not working for certain key(s)

I am wondering if anyone else has had this issue yet. I have an iPhone 8GB running Software Version 1.1.4. When using the keyboard in landscape mode (so basically, using Safari) the key that is represents "U" and "7" does not work. To test this, I run my finger over across the top row and that key is definitely skipped.
This does NOT happen when the keyboard is in portrait mode.
...This seems like a SW issue, but could it possibly be a dead touch sensor in the vicinity of the key?
Any help is much appreciated.
Thanks.

Here are a couple of articles from the apple support website that might help out.
http://docs.info.apple.com/article.html?artnum=305740
http://docs.info.apple.com/article.html?artnum=305744

One speaker on MacBook Pro not working for certain programs?

When I either receive or place a FaceTime call on my MacBook Pro, the left speaker cuts out audio and produces high static. The right speaker is fine. The receiving end can also hear the static feedback, but their two speakers work fine. I have all my iOS devices setup to receive and place FaceTime calls (iPhone 5s, iPad, and MacBook Pro 15 inch late 2011). If I place or receive the FaceTime calls on my iPhone or iPad, there is no problem.
I've tested the speakers, youtube, iTunes audio, streaming websites, netflix, etc... and all works fine on the MacBook Pro. Just FaceTime. I also went into system preferences and the speaker setup is correct (audio in and out - internal speakers).
I've also restarted, reinstalled Yosemite...still FaceTime left speaker problem.
I appreciate any troubleshooting advice and/or if others have experienced this problem.
Thanks!

The Troubleshooting FaceTime for Mac OS X:FaceTime for Mac: Troubleshooting FaceTime - Apple Support does not offer much in the way of help for the problem you are having.
Have you tried going to System Preferences, Sound, Output and playing around with the Balance to see if that makes any difference?
You might also consider going to FaceTime, Preferences and turn FaceTime OFF and then back ON.
And to have the system checked, you could take it to an Apple store genius bar and have the techs see if there is something hardware-wise interfering with FaceTime.

Split Rule doesn't work for certain items

Hi experts,
In TPVS, I set up split rule with split qty 1 and no item split. The rest of setting is like default value. However, in VS01, some item qty is more than 1. I check the detail. There is exception, but don't know what it is. Is there any way to know the exception detail?
I know the freight unit can not be automatically executed when fixed line exists or the freight unit is created manually. I check the freight unit type (icon), it's @39@. It should not be manually created unit. There is way to figure out whether it's fixed line. Is there any one can give me some idea about that?
When we enter VS01, the system will build freight unit based on split rule. However, if we do not exit vs01 and re-run VSR optimization many times, the freight unit will be come bigger and bigger but still within vehicle capacity if we choose merge planned item option in split rule. The result might not be right. For example, system merge 2 items together for vehicle A and next item might merge these 2 items with another 1 item for vehicle B. If capacity of vehicle A is 2, system won't never choose vehicle A if the FU is 3 after the previous optimization run. Is that true? Does that mean we need to exit vs01 everytime for each optimization run?
Thanks for your advice,
Jessie.

HI Jessie,
Regarding the first issue, I hope you have properly maintained the unit of measure in splirt profile. I would recommend that you try performing manual split using the same split rule. This might tell you the exact reason.
I can not comment about 2nd issue.
Regarding the 3rd issue, the problem you say seems to be right. I have also experienced the same. My only query is that when you run the optimizer, the system will plan the shipments & will assign the freight units to the truck. Now if you have selected 'Fix Temporary Shipments' in optimizer profile, it will not modify the existing planned shipments in new optimizer run & hence will not merge new item with existing merged item.
I hope my understanding of the issues is correct. You can reply back in case you have more queries.
Thanks & Regards
Sandeep Patil

OIDs for an Available MIB NOT Working for SNMP

Hello All,
Device: Cisco Catalyst 4510R+E
IOS: Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.03.02.SG RELEASE SOFTWARE (fc1)
I am trying to do snmpwalk/snmpget requests to our switch for CPU/Memory/Flash type usages. When I did an snmpwalk in order to get ALL OID's values, one of the OIDs which is for "Agent Capabilities for OLD-CISCO-CPU-MIB", which says it's supported. But when I try to use one of the OIDs found in that MIB on Cisco.com, it returns with the following:
Version 1 Attempt:
# snmpget -v 1 -c public x.x.x.x 1.3.6.1.4.1.9.2.1.57
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: SNMPv2-SMI::enterprises.9.2.1.57
Version 2c Attempt:
# snmpget -v2c -c public x.x.x.x 1.3.6.1.4.1.9.2.1.57
SNMPv2-SMI::enterprises.9.2.1.57 = No Such Instance currently exists at this OID
Any idea why this OID would not be working when it says it supports the OLD-CISCO-CPU-MIB..? Or does anyone know of some OIDs that I could try that would get me any of CPU, Memory, Flash, etc Usages...? I've checked Cisco SNMP Object Navigator, but none of the CPU one's I've tried seem to work.
Any thoughts or suggestions would be much appreciated.
Thanks in Advance,
Matt

You are getting this error because your SELECT statement is not returning any rows. You need to do something like:
DECLARE
l_count number:=0;
CURSOR check_emp IS
    SELECT COUNT(ename) cnt
      FROM emp
     WHERE ename = :p14_ename;
BEGIN
IF :p14_ename IS NOT NULL AND :REQUEST ='CREATE' THEN
    OPEN check_emp;
    FETCH check_emp INTO l_count;
    IF (l_count > 0) THEN
      CLOSE check_emp;
      return l_count||' This employee name already exists. Please enter a new name.';
    END IF;
    CLOSE check_emp;
END IF;
END;Mike

Wait_for_file() not working for certain file names

Data Services Version: 12.1.1.3
OS: Windows Server 2003.
Hello,
I'm using wait_for_file to poll for files in a certain directory. I've used this in the past for other projects and never had an issue until now.
What seems to be happening is with certain file names, wait_for_file is returning a 1 (meaning at least one file found), however the file list is coming back as blank.
For example:
If I put a file name called cs.p.P110113CN.b.110114 in the directory, I get a blank return file list.
If I then rename this to 110114, it works fine.
Here's the code I'm using:
wait_for_file($GV_InputDirectory || '*',0,0,1,$GV_InputFileName);
$GV_InputDirectory varchar(1000)
$GV_InputFileName varchar(100)
Any ideas why this might be happening? Renaming the file isn't really an option as it's a standard format that we've used for years.
Edited by: Craig Cartmell on Mar 7, 2011 11:16 AM

Hi,
Thanks for the reply.
$GV_InputDirectory is set to
wcs-dev-boweb2\c$\DebtManager\Dev\Interfaces\Bulk Payments\Agency\credit-security\Input\.
I'm wondering if it's something to do with the length of the directory/filename combined?
If I place a file called "110114" in there, wait_for_file() works perfectly. If I change it to "cs.p.P110113CN.b.110114", I have problems.

Jump to Function not working for header items

Hi Experts,
I have a query using jump to function to access R3 tranaction,
It has issue jump to transaction MB51
Item Data:Material, plant, ...
header data: posting date,...
All settings in RSBBS are correct, but the posting date is not passed onto R3 report.
I have tried similar transaction MR51and posting date can be passed to R3.
any idears?
Feng

This is solution:
In ERP system.
Set MEMORYID in table MMIM_REP_CUST for fiekd BUDAT.
Value for MEMORYID have to be from TPRA table and value for DTG upper than current timestamp
After this recall mb51 and set this value in RSBBS assignment in BW system.
Thanks Nikolay Ryzhov for this solution.

CRM Availability Check not working for certain Item Category

Similar Messages

Maybe you are looking for