CRM - Merging the report

Hi,
I have created Credit Management workflow in CRM and now I am stuck with having the Credit Request Summary report. I tried Print preview, however it does not provide me the entire details. Under request, I have tabs such as Request details, Customer
details, Facility Details (multiple tables) and other securities details. Customer needs to have Print of Credit Request, to solve this I have created multiple reports which display the Facility details. But now I am stuck with merging those reports.
Need assistance....

Hi ,
You can Merge the column by using Table Interface in WAD.What you can do is include the list of atendees(person) in the query and in Table interface you can have a lookup to the Infoprovider and get the corresponding value of list of atendees( company). Then you can concatenate both the value and diplay them under same column in WAD Report.
You can refer the below attached document for Table interface....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49dfeb90-0201-0010-a1a2-9d7a7ca1a238
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
http://help.sap.com/saphelp_nw04/helpdata/en/a2/06a83a4bd5a27ae10000000a11402f/frameset.htm
and shown below is the sample code how we are merging two columns in WAD report..
if I_X = 3.
MOVE C_CELL_CONTENT to CELL_DETAILS.
SEARCH CELL_DETAILS FOR '>'.
STARTING_OFFSET = SY-FDPOS + 1.
SEARCH CELL_DETAILS FOR '<' STARTING AT STARTING_OFFSET.
LENGTH = SY-FDPOS - 1.
MOVE CELL_DETAILS+STARTING_OFFSET(LENGTH) TO POSMDESC.
concatenate POSMDESC '<BR>' into POSMDESC.
read table itab_/BIC/TAPMPOSM into it_/BIC/TAPMPOSM with key
/BIC/APMPOSM = POSMID.
concatenate POSMDESC it_/BIC/TAPMPOSM-TXTLG into POSMDESC.
move POSMDESC to C_CELL_CONTENT.
endif.
Hope it helps....
Regards,
Umesh.

Similar Messages

Any ideas on how to merge 2 reports on page to export to Excel or PDF?

This is for OBIEE 11g (we are currently running 11.1.1.6.8). We have a user requirement to put the prompt selections on each report that is exported to Excel or exported to PDF. This requirement has to do with auditors. We cannot use the Filter Criteria view because we have saved filters that contain other saved filters so not all of the filters are shown. What the users want is to just have the ability to Export to Excel or PDF for one report and add the prompt criteria so that it also shows in Excel or PDF. We know we can use presentation variables and create a narrative view to show all of the prompt criteria. But we don't want to have this in a view in the compound layout of every report on the page (we have many pages with many reports on them). What we would like to do is have the Export (to Excel or PDF) download the prompt criteria (like when you use the printable HTML and printable PDF functionality only we want this for one report). So think of merging the report that is being Exported to Excel or PDF with another report that is built to show the prompt criteria. Is anyone else doing this kind of functionality? Any ideas on how to do this with javascript?
We created an SR on this to find out if Oracle had some ideas but they did not and said that this is already an enhancement request ( Bug 8242921: ALLOW PROMPTS TO BE DISPLAYED WHEN DOWNLOAD TO EXCEL)
Any help would be appreciated. Marybeth

Did u tried the first method? i.e directly exporting the analysis to excel?
Thanks.

How to create a custom Report in SAP CRM using the Bol Framework

Hi Guys
I have developed a report in SE38 which calls a custom Function Module within it and it works all good.
Now I want to take my Function Module as well as the external structures I created for this report and use them to make a View in SAP CRM which will allow the user to make selection and then when they click on a button another view has to be shown which should have the content of the report based on the selection.
I know how to create a view based on the standard object types but this time I want to use my custom function Module..
Kindly advice or refer me to a link that might be useful.
Regards
* Thato *

You want to create a View in SE11 calling FM that you created? Is it?

How to merge the cells on a tittle's report

Hi there!
Considering a simple obiee report composed of a title and a pivot table. At the same time, the title is composed of a logo and a sentence. If I export it to excel, the logo in the title and the sentence are allocated to separated cells. Do you know how to merge the cells on the tittle?
Any help will be GREATLY appreciated.
Thank you very much indeeed!!!
PS. Oracle Business Intelligence 11.1.1.6.4

Hi There,
I am also facing same issue. Please let me know if any one has solved it.
Thanks in advance.

Help in merging the output rtf/documents reports

Hi,
I am working with XML pub tool for a user requirement that 2 output reports(rtf documents) were genated using XML processor from 2 rtf templates, XML data files etc. No I need to merge the 2 output rtf/doc reports . Is there any function in XML publisher so that I can merge these output reports as one report.(Same as merging 2 documents in microsoft word)
Thanks
Raj

You can merge/append 2 documents with a third party tools wihtout using XMLP publisher.
HTH
Shaun S

Error while generating the report in BI using CRM

dear experts... . / friends ...
i have created a query long back called SERVICE REQUEST using Query designer
using that particular query i have generating the reports from MAY 1 to till date
in my report i have a characteristics called USER STATUS , for this user status i can restrict the below values i.e
open
reopen
waiting
in - transfer
resolved
new
completed
in the above values , i want to get the transaction numbers which are not completed i.e. i need to exclude complete
and i need to include all the above values
but after generating the report , am getting completed records too...
and in the report i saw for that completed record i have OPEN DOCUMENTS(key figures) and NO.OF DOCUMENT HEADERS(key figures) is 0
actually if we see any updated record for the particular report the key figure NO.OF DOCUMENT HEADERS should be 1 right?
so in my scenario if NO.OF DOCUMENT HEADERS getting 0 so the filter condition for COMPLETED , is not working
so that the reason even though i have filtered the COMPLETED value for the USER STATUS field , am getting those
fields....
so friends kindly help me in this regard to avoid completed value for the filed USER STATUS..
thanks in advance...for u r helping
regards...
GA

dear experts,
for the above issue i have raised the OSS message and i got the below reply as well..
they told me to create a pre queris can any one help me in this regard?
=>
=> If you want to ensure that all completed transactions are filtered
from the report even when keyfigure "open documents" <> 0 then
you have to adjust your query definitions, e.g. by means of
pre-queries to create a list of records for which a "completed"
state-entry exists.

SAP BI Report Publication on CRM Web UI Reports

Hi Experts,
Im required to post a BI report on Web UI.
I did the customization for the same in the path.
SproCRMUI FrameworkUI Framework DefinationDisplay SAP NetWeaver BI Report in CRM..
Then I created a Logical Link id with the BI Report assigned to the Navigation Bar Profile and made the link visible in the define business role
It works fine in development, but when i transport the request to quality for testing I recieve an RFC error that the client cannot be reached, This is because the RFC i assigned to the report is also getting transported to Quality and causing the error. Usually RFC's are not transported but they are assigned client specific in the system that it is transported.
So can anyone help me to find out a soultion to the problem so that RFC is not transported in the transport request.
Plz help...

Hi Aravind,
please be aware in CRM 7.0 there are two different options for analysis:
1. CRM Interactive Reporting (see Building Block C41)
2. CRM Analytics (Using a complete BI-System)
In your case you followed BB41, so you can use Interactive Reports.
The error you get in WEB UI is for the BI reports (option 2). This option needs a whole BI-System.
The links to these reports were delivered by default. So if you want to use these reports you need a BI consultant for setting a up new BI-System and the neccessary configuration for the ETL-Process.
If you dont want to use B reports, you can simply make them invisible in your web-ui configuration.
Kind regards
Hannes
Edited by: Hannes Wegehenkel on Jul 26, 2010 10:47 AM

Vista/Adobe 9/sql image Error in Crystal Report:Failed to Export the Report

When I try to export my Crystal Report (v2008) from a Vista machine (using Crystal RDC export methods) as a PDF, I get the following error:
Error in Crystal Report: Failed to export the report.
This only happens when a particular subreport (that contains a sql image) prints (based on an input parameter). We have other subreports (within this same report) that print a sql image just fine. But, when this subreport prints, the above error appears.
I can run the same report on an XP machine without error.
Exportmodeller.dll and crtsv.dll are both installed and registered to the
C:\Program Files\Common Files\Business Objects\3.0\bin folder
I have tried opening the report, removing the image, and then adding it back in again to the subreport.
Still receive the same error.
Any suggestions?

>
Don Williams wrote:
> RDC is no longer shipped in CR 2008. You are using the embedded designer used within the Visual Studio .NET IDE and is not licensed for distribution.
>
> Upgrade to the .NET components and post your question to the .NET forums.
>
> Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.
Don,
Can you please clarify?
Our VB6 app that uses Crystal XI RDC runtime components. Our Crystal reports are edited in CR2008 SP1 developer edition (not through the VB.NET embedded report designer). We have deployed the CRXIRelease 2 runtime components (via the merge module) to our client machines in order to execute the RDC.
We can print/preview/export to excel, but the pdf creation is failing with this error.
We are only using the RDC (which we know is no longer supported) because of huge issues with the Crystal for .NET methods we are having with our customers (I have an active case for this issue). Therefore, we have to rollback our .NET product and revert to the RDC code.
Vista is failing to create a PDF for a report developed in the CR2008 SP1 developer edition when using the RDC.
When you say "Also, those old dll's will not work in CR 2008. Last patches will give you the option to export to Excel in Legacy mode. We built it into our export dll.", what do you mean by "will not work in CR2008"?
Thank you

The second time when i print the report the page appear cut in the right

hi,
I created a report in Report Builder 6i. When i print the report appear well, but when i try to print the same report second time in the right of the page appears cut.
Why? What should I do to appear the entire page at the second print?
Thx.

Flattening and merging are very similar. The main difference is merging keeps the transparent areas, whereas flattening removes all transparent areas by giving it a white background. A good example of flattening is a jpg image.
Since you have closed the file by closing photoshop, that means that the history is now gone, no way of undoing.
So that leaves you with two choices.
You can either recreate the whole document.
Or you can make selections of areas you are keeping and moving them one at a time to new layers. Keep each object on a separate layer. Then redo the area behind those objects.

I signed up for Apple ID and Apple Support Communities separately. Can I merge the two accounts?

I signed up for an "Apple ID" and an "Apple Support Communities username" separately using the same e-mail address. Is there any way to merge the two accounts?
I signed up for "Apple Support Communities" several years ago to get help with Apple products. I then signed up for an "Apple ID" later on to buy stuff at the iTunes Store.
I was trying to access "Apple Support Communities" using my Apple ID and I get prompted to choose a username. But when I type my current username, it says the username is already taken. Alternatively, if I try to choose a new username to go along with my Apple ID, I get a message saying that there is a username already assigned to my e-mail address.
For some reason, "Apple Support Communities" is not intuitively syncing the two accounts together despite the fact that they are linked to the same e-mail address.
I don't want to cancel either of these accounts since I have activities using one/the other that I do want to preserve.
Can anyone help me merge these two accounts together?
Thanks.

I will do it for you. I can't say they will take any action, they operate in their own way, but if they feel there may be a threat to your security they will normally take it seriously. My guess is they would eMail their actions to you, though not to me of course.
I hope this will help.
Okay; I've now reported the thread.
Message was edited by: seventy one

Display the reports under all subfolders at a time in the content area?

Hi All,
In SAP EP portal,We have a requirement to display few reports wherein we have 7 roles with the same names but different ID's and they are merged together so that even if the users have 7 roles assigned he will see only 1 tab in the first level navigation and uder that there will be one folder at the second level.Now the requirement is like this
1st level navigation : Role Name
2nd level navigation :Folder Name
Detailed Navigation : Folder Name
                                 Sub Folder Name
                                 Sub -sub folder1 Name
                                 Reports   --(one or many)
                                 Sub -sub folder2 Name
                                 Reports   --(one or many)
                                 Sub -sub folder3 Name
                                 Reports   --(one or many)
Under al the sub-sub folders a workset map iview is added to display the reports with a pictogram in the content area.In the detailed navigation, as soon as the user clicks on the Sub folder the user should be able to see the reports under all the Sub-sub folders( Sub-sub folder1,Sub-sub folder2,Sub-sub folder3) .But currently the user has to explicitly click on each of the Sub-sub folders to view the reports(thrice in this case).Plz give a solution in which all the reports under the 3 Sub-sub folders should appear simultaneouly in the content area at a single click on Sub Folder
Thanks & Regards,
Sowmya
Edited by: Sowmya B on Jan 4, 2010 2:14 PM

Resolved

How to merge the 2 field in alv gride display

Tables for ALV display
DATA: it_fieldcat   TYPE slis_t_fieldcat_alv,
      wa_fieldcat   TYPE slis_fieldcat_alv,
      wa_layout     TYPE slis_layout_alv,
      it_exclude    TYPE slis_t_extab,
      wa_exclude    TYPE slis_extab,
      it_header TYPE STANDARD TABLE OF zqm_imir_hdr,
      wa_header LIKE LINE OF it_header,
      it_final TYPE STANDARD TABLE OF zqm_imir_itm,
      wa_final LIKE LINE OF it_final,
      it_vcode      TYPE RANGE OF zqm_wtr_itm-vcode,
       wa_vcode      LIKE LINE OF it_vcode.
DEFINE m_fieldcat.
wa_fieldcat-fieldname = &1.
wa_fieldcat-tabname   = &2.
wa_fieldcat-seltext_m = &3.
wa_fieldcat-outputlen = &4.
wa_fieldcat-col_pos   = &5.
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
END-OF-DEFINITION.
DEFINE m_vcode.
wa_vcode-option   = &1.
wa_vcode-sign     = &2.
wa_vcode-low      = &3.
wa_vcode-high     = ''.
append wa_vcode to it_vcode.
clear wa_vcode.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM data_retrival.
PERFORM lead_time_calculation.
IF it_final[] IS NOT INITIAL.
    PERFORM alv_display.
ENDIF.
Display ALV
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = sy-repid
      is_layout          = wa_layout
      it_fieldcat        = it_fieldcat
      i_save             = c_x
      it_excluding       = it_exclude
    TABLES
      t_outtab           = IT_OUTPUT[]
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
m_fieldcat: 'ZIMIRNO' 'IT_OUTPUT' text-003 21 0,
              'PRUEFLOS' 'IT_OUTPUT' text-004 21 1,
              'ZCRDAT'    'IT_OUTPUT' text-030 9 2,
              'INITS'     'IT_OUTPUT' text-031 6 3,
              'SPLIT'     'IT_OUTPUT' text-005 12 4,
              'WERK'     'IT_OUTPUT' text-006 5 5,
              'LOSMENGE' 'IT_OUTPUT' text-007 24 6,
              'MENGENEINH' 'IT_OUTPUT' text-008 15 7,
              'NAMEVEND'   'IT_OUTPUT' text-009 11 8,
*& Hypercare - 721600 - IMIR Changes - Start
             'KONT_PSPNR' 'IT_OUTPUT' text-023 15 7,
              'POSID' 'IT_OUTPUT' text-023 15 9,
*& Hypercare - 721600 - IMIR Changes - End
              'LTEX1' 'IT_OUTPUT' text-024 24 10,
              'EBELN'    'IT_OUTPUT' text-010 26 11,
              'MBLNR'    'IT_OUTPUT' text-011 24 12,
              'ANZGEB'   'IT_OUTPUT' text-012 17 13,
              'GEBEH'    'IT_OUTPUT' text-013 4 14,
              'MATNR'    'IT_OUTPUT' text-014 18 15,
              'TXZ01'   'IT_OUTPUT' text-015 128 16,
              'SPECE'    'IT_OUTPUT' text-016 23 17,
              'VCODE'   'IT_OUTPUT' text-017 24 18,
              'TAGNO'   'IT_OUTPUT' text-018 10 19,
              'HEATNO'   'IT_OUTPUT' text-019 11 20,
              'IDCODE'   'IT_OUTPUT' text-020 7 21,
              'TCNO'   'IT_OUTPUT' text-021 9 22,
              'REMARKS'   'IT_OUTPUT' text-022 30 23,
              'BUDAT'   'IT_OUTPUT' text-025 30 24,
              'CPUTM'   'IT_OUTPUT' text-026 30 25,
              'VDATUM'   'IT_OUTPUT' text-027 30 26,
              'VEZEITERF'   'IT_OUTPUT' text-028 30 27,
             'ZLTIME'    'IT_OUTPUT' text-029 30 26,
              'LEADTIME'   'IT_OUTPUT' text-029 30 28.
DATA : v_unit like T006-MSEHI VALUE 'HR',
       v_FCALID like SCAL-FCALID,
       v_zltim TYPE f,
       v_zltime TYPE p LENGTH 8 DECIMALS 2.
SELECT SINGLE FABKL INTO v_FCALID FROM T001W WHERE WERKS = s_werks.
SELECT zcrdat INTO TABLE it_zqm_imir_hdr
       from zqm_imir_hdr
        FOR ALL ENTRIES IN it_final
        where zcrdat EQ it_final-zcrdat.
SELECT mblnr mjahr budat cputm
      INTO TABLE it_mkpf
      from mkpf
        FOR ALL ENTRIES IN it_final
      where mblnr EQ it_final-mblnr
        AND mjahr EQ it_final-mjahr.
SELECT prueflos vdatum vezeiterf
      INTO TABLE it_qave
      from qave
        FOR ALL ENTRIES IN it_final
      where prueflos EQ it_final-prueflos.
SORT it_mkpf    BY mblnr mjahr.
SORT it_qave    by prueflos.
SORT it_zqm_imir_hdr BY zcrdat.
    LOOP AT it_final into wa_final.
      CLEAR: wa_output,wa_mkpf,wa_qave,wa_zqm_imir_hdr.
      MOVE-CORRESPONDING wa_final to wa_output.
READ TABLE it_zqm_imir_hdr INTO wa_zqm_imir_hdr WITH KEY zcrdat = wa_final-zcrdat
                                               BINARY SEARCH.
      READ TABLE it_mkpf INTO wa_mkpf WITH KEY mblnr = wa_final-mblnr
                                               mjahr = wa_final-mjahr
                                               BINARY SEARCH.
      MOVE wa_zqm_imir_hdr-zcrdat TO wa_output-zcrdat.
      MOVE wa_mkpf-budat TO wa_output-budat.
      MOVE wa_mkpf-cputm TO wa_output-cputm.
      READ TABLE it_qave INTO wa_qave WITH KEY prueflos = wa_final-PRUEFLOS
                                               BINARY SEARCH.
      MOVE wa_qave-vdatum     TO wa_output-vdatum.
      MOVE wa_qave-vezeiterf TO wa_output-vezeiterf.
LV_START_DATE = wa_zqm_imir_hdr-zcrdat.
LV_START_DATE = wa_mkpf-budat.
LV_START_TIME = wa_mkpf-cputm.
LV_END_TIME   = wa_qave-vezeiterf.
LV_END_DATE   = wa_qave-vdatum.
IF LV_START_DATE IS NOT INITIAL.
   IF LV_END_DATE IS NOT INITIAL.
      CALL FUNCTION 'SD_CALC_DURATION_FROM_DATETIME'
        EXPORTING
          i_date1                = LV_START_DATE
          i_time1                = LV_START_TIME
          i_date2                = LV_END_DATE
          i_time2                = LV_END_TIME
       IMPORTING
         E_TDIFF                = LV_DIFF
        E_DATE2_EARLY          = E_DATE2_EARLY
      EXCEPTIONS
        INVALID_DATETIME       = 1
        OTHERS                 = 2
      IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
eNDFORM.}
This is my code unable to merge the to tabs position is on 3rd and 4th.
need help ......
thanks,

Hi,
From Your code I saw that you called Macro of fieldcat after Calling the ALV Function Did You Check That One.
Following links may be useful for you ,
ALV report: How to merge 2 columns into 1 column?
Hope this information helps You
Regards,
Raghava Channooru

Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

We're using ASP.net with .Net 4, developing with Visual Studio 2012. We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service). The reports are
executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
We only receive this when running a report that uses expressions on a separate thread. I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
This didn't occur with the previous version of our application which used .net 3.5.

As mentioned, we are not using the Reportviewer control, we are rendering locally. Not certain if that would make a difference.
Also, I had tried using all the built-in accounts. Just for kicks I changed it to LocalSystem again, then reset IIS (see image below). I then tried to export the report in a worker thread and received the same error.
Here is the text from the exception:
Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
--- End of inner exception stack trace ---
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

An error has occurred while loading the report

Hello all,
I'm trying to view a Crystal Report from my CRM application and I receive the follow error message, but only when trying to view it on a laptop:
An error has occurred while loading the report. Please contact technical support.
Has anyone else run into this problem?
Thanks!

Hello Eddie,
please post some more information about your problem.
What is the name of your CRM app?
Who developed this app?
Did it never work or do you get this error only now?
Always or only sometimes only?
In what versions and on what patchlevel are you working ?
Thanks for some more info
Falk

Disk util in recovery mode shows invalid disks - fixing merges the disks to a single LVG

Seems another day, another interesting issue in Mac OS which has me stumped a little bit.
Background: My setup is the laster Mac Mini server, I have upgraded the root disk to a 256GB SSD and moved the ordered 1TB magnetic drive to the secondary disk.
I installed the system with Mac OS Mountain Lion and everything was fine. At this stage I had both disks encrypted with filevault. I then decided to play with some imaging and so destroyed the disks with diskutil cs delete UUID from the terminal in recovery mode (the installer would not work with the disks until I did this), at this stage everything is still ok and the system installed as expected. I then installed a second Mountain Lion instance to the secondary disk, and booted off this, to clone the SSD with disk util. Again, up until this point, everything is as expected.
Once I had the disk image created, I rebooted to recover mode, and attempted to clear the disks using diskutil and then reinstall Mountain Lion to the SSD, and have the magnetic disk as my users disk, at this point, disk util showed the disks in red. Clicking the disks, diskutil informed me that the disks were bad and I could either fix or ignore. If I ignored, then the installer could not use the disks, if i fixed them, then diskutil merged the disks into a single LVG of 1.25TB, which is obviously not what I wanted, no matter of permutations could fix this. I then had to open the terminal, destroy the LVG and then let the installer run (from memory, i might have had to create a default partition on the SSD before the installer could use the disk, but not 100% sure anymore (tried too many things!))
Now, when I open disk util in Mountain Lion, everything is fine, but if I reboot to the recovery partition, then the disks are in their invalid state still.
I found a macworld article (http://www.macworld.com/article/2015664/how-to-split-up-a-fusion-drive.html) which details pretty much what I'm seeing (see the quirks section), but I haven't got a fusion drive - I can only assume then that diskutil *thinks* I have a fusion drive!
- has anyone seen this before? is there a fix? can I make the disks valid in recovery-mode diskutil as its quite useful to partition the disks when installing the OS.
- does anyone know how I got into this state? is it because of two instances of ML?
- Is this a bug in diskutil? is it worth of a bug report?
As an aside, when running diskutil list in recovery mode, i see, from memory 13 disks (/dev/disk0 - 13) which seems strange, disks0 and 1 were my internal disk, disk 2 the ML net image, and then the rest were small, a couple of hundred K in most cases.
thanks!
SockThief

hey @keg55
brilliant! So I was mostly right now doesn't that make you feel good - to be honest, I'm gettingg rather sick of tools that are too smart and do what they think you meant, rather than what you **** well tell them!
It's was strange the timing of it, as diskutil (gui in recovery mode) only thought the disks were bad after I installed ML on the magnetic disk as well as the SSD.
So if I want to erase a disk (to ensure an absolute clean slate before reinstalling) is a diskutil eraseDisk diskX sufficient? I don't think writing 0's is really required, so zeroDisk/randomDisk/secureErase aren't really applicable to a simple reinstall. But, then I guess before installing, it will require a partition, correct?
I was thinking, perhaps I could solve this by making a 1:1 LVG, i.e.: put the SSD in an LVG and the magnetic disk in an LVG?

CRM - Merging the report

Similar Messages

Maybe you are looking for