CRMD_IM_ML_HEAD and CRMD_EMAIL_LIST update

All:
I have created campaign with two business partner in target group. One business partner has valid email and other invalid email. When i execute the campaign, i see in both tcode: CRMD_EMAIL_LIST, the Status field display 'Contact Achieved'
Also in In the table CRMD_IM_ML_HEAD, following fields has following values
SUM_SUC_MAILS - this field has value '2'
SUM_HARD_BOUNCES -- this field has value '0'
SUM_SOFT_BOUNCES -this field has value '0'.
However when in goto SOST and check the mail status i see one email (with incorrect email id) has Status: Error message.
My question is , in order to update SUM_HARD_BOUNCES and SUM_SOFT_BOUNCES in CRMD_IM_ML_HEAD and CRMD_EMAIL_LIST, do i need to configure Bounce Management provided in the link : http://help.sap.com/saphelp_crm70/helpdata/en/8f/039b709dd244b8a60a088edf7b67af/frameset.htm
If yes, Whic action i should use, i see SAP provides following four standard actions:
(Bounce: Address Data Update)
(Bounce: Status (Default 2)/ELM Update)
(Bounce: Status (Default 5)/ELM Update)
(Bounce: Manual Verification (WebClient))
Do i need to create new action to update these tables? or is there any other way to address this problem?
Any inputs are highly appreciated?

Hi Krish,
I tried to send direct message but there was an issue in it so replied to you already answered question sorry for that.
I am facing the same issue where for bounce emails soft or hard the SUM_SOFT_BOUNCE adn SUM_HARD_BOUNCE is not updating and in the header table and the status also not updating in Item table.
Please help incase you got the solution.
Thanks,
Prem

Similar Messages

Macbook4,1 10.6.8 and firmware update - what went wrong?

Macbook 4,1 2008 2.4Ghz (not unibody). I recently reformatted my hard drive and reinstalled 10.6 from the Retail DVD and all seemed to go well. The MB was working fine up to that point. I then set up the MB (network, date and time, etc.) and repaired permissions.
I then checked Software Update and downloaded and installed the recommended updates to 10.6.8.
Again, all seemed to go fine. System booted and I repaired Permissions again. I went to the Apple web site, a couple of other web sites, and Software Update found another update to install: Firmware. Though I don't remember what version.
I clicked OK and it installed.
Upon reboot, it seemed to install okay.
But then I left the Macbook and it went into Sleep.
I didn't come back to it again until the next day.
When I pressed a key to wake it, I got what I now know is the screen that appears after you wake it from SAFE SLEEP. As per this Apple KB article: http://support.apple.com/kb/HT1757.
And this is where the problems started.
After the MB woke to the Safe Sleep screen, which shows the desktop a little "out of focus", the progress bars started filling in from left to right, BUT before they completed, the screen went BLACK.
And it has had a problem with black screen ever since. I can boot the MB from internal or external HD or from DVD, and it seems to boot fine. Boot chime, Apple logo, spinning wheel, then at the point where it pauses, blue screen, then goes to desktop, instead the screen goes black.
It finishes booting, but seems to go into Sleep.
I can wake it by pressing a key, but the screen either comes on and goes black again after 10 seconds, or I get the Safe Sleep wake screen, and then it goes black after 10 seconds.
And at boot or when waking the MB, the front LED flashes 5 times. There are no error beeps.
I've tried changing RAM, but problems remain.
So what's all this? Any ideas?
The display doesn't seem dead, as it works to boot and wake. The MB works fine with external monitor.
It's weird, but I can't think of anything apart from the Firmware update. The problems started right after installing it.
Unfortunately, this model of Macbook doesn't have a Firmware Restoration image to download and burn to CD. It is the ONLY Mac at this point that doesn't have this!
I called Apple support and even bought the 49 Euro Pay Per Incident service, which proved to be the same as throwing 49 Euro out the window. The only "technical" support they provided was to Reset the SMC, which you can find out about FOR FREE at the Apple website. And which I'd done anyway. I'd also reinstalled the MacOS. Don't want to beef too much, but sheesh, you've already got a Macbook that might need costly repairs, and they make you pay 49 Euro BEFORE they even ask you about the problem and what you've done to try to solve it. I'm tempted to say "ripoff". I mean, if all they can offer you is the advice to reset the SMC - which Apple offers for free at their website - then that's pretty poor service for 49 Euro, to say the least.
Apart from the wasted 49 Euro, I'm pretty peeved about the Firmware update (or so it seems) wrecking a perfectly working 2008 Macbook. I don't know how to convince Apple of this, but I'm certainly going to try.

Thanks for the reply.
Re. the Displays setting, the Macbook display isn't recognized and mirroring isn't an available option.
I've scoured the net and the idea of replacing the PRAM battery may be something to try. I read a post by a guy with a Macbook logic board screwed up by a Firmware update, which he solved by replacing the PRAM battery, as when you disconnect it you reset the logic board.
Which capacitor?
No luck so far with talking to Apple. I will try to get hold of someone a little more tech savvy and/or in a position of authority, as it seems that the Firmware is the culprit. Obviously a million other things could go wrong with a Macbook, but given the timing here it looks like the Firmware. Firmware updates can and occasionally do screw up a computer, as most manufacturers will warn you before you apply the update: PC makers, printer makers, etc. And they probably warn you that it's all your responsibility if anything goes wrong. But re. the Apple Firmware update:
1) it came thru Software Update
2) there was no warning
3) to make things worse, there's no Firmware Restoration image that I can burn to a CD to reflash the logic board: this is the only Apple computer that doesn't have a Firmware Restoration option
I'll try to get thru to a manager and convince him/her that the firmware may have been the cause.
Do you think an authorized Apple tech might have access to some way to do a firmware restoration? Something not avaiable to mere mortals? Because if not, the only solution looks like a new logic board.

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help

Using Adobe Photoshop CS2 version 9 and have updated it, but when stacking photos, it comes up with PSD, whereas I want Jpeg, and I change the format to Jpeg and the box then comes up with cannot save as there is a program error. Be very grateful for help with this, please.

jpg does not support Layers.
Just to make sure, what exactly do you mean by "stacking photos" and what do you want to achieve thereby?

I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

Statement caching and batch update

Can these 2 JDBC features work together ?
Is it possible while statement is cached to be reparsed (soft) if used in batch update ?
I am asking this questions because i have a sitution where an insert is cached using implicit statement caching and then put in a batch to exeute batch updates !!! From statspack reports i find that 1/3 of statements are reparsed ... even soft !!!

Statement caching and batch update work fine together. The most common cause of unexpected soft parses is changing the type of some parameters. If you first bind one type, setInt(1, ...), do addBatch, then bind another type to the same parameter, setString(1, ...), and do addBatch, you will get a soft reparse. There is nothing the JDBC driver can do about this, the RDBMS requires it.
In general, whatever parse behavior you see with statement caching you would also see without it.
Douglas

How do you transfer voice memos to your pc? I have synced my phone a number of times and everything updates with the exception of voice memos?

How do you transfer voice memos to your pc? I have synced my phone a number of times and everything updates with the exception of voice memos? Also, my voice memos are checked to be synced everytime my phone is synced.

Voice memos, once correctly synced, will appear under your Music Library. Can you go through your music library to check?

Help with opening Adobe Reader and downloading updates

I can not open Adobe .pdf files any longer (this started yesterday, prior to that I could open adobe files).
When I double click a .pdf file I get this notice on my screen: Windows cannot access the specified device path or file. You may not have the appropriate permission to access file.
So I went to the Adobe download site to download a new copy of Adobe. When I start the download I get this on the screen: The instruction at "0x0e3a0068" referenced memory at "0x0e3a0068." The memory could not be written. Then two options are listed: click OK to terminate or cancel to debug. So I click on cancel and I get this on my screen: Internet Explorer has closed this webpage to help protect your computer. A malfunctioning or malicious addon has caused I.E. to close this webpage.
I don't have AVG running, I do have avast but I've disabled it. I ran Registry Mechanic and an I.E. erasure program but nothing helps.
I have gone into I.E. and reduced the security level to its lowest state but no joy.
So, any ideas or suggestions on what's the problem and how to overcome it would be appreciated. Thanks, in advance, for your reply. Jim R.

Hi Mike..tried that as well but no joy. A friend of mine was looking at it all and noticed that it was an I.E. thing as far as not letting me redownload the reader so I went to Mozilla Firefox and I could download a new version but....whenever I attempt to open a .pdf file I get that message, "Windows can not open the specified device, path or file. You man not have the appropriate permissions to access the item."
Damn...this is irritating as I need to get to some of thos files as I need them for a Journal I'm working on as editor-in-chief.
It all worked just fine last Saturday but starting Monday when I was on my flight out to D.C. no joy.
Sigh...Jim R.
Jim R.
Date: Tue, 1 Dec 2009 14:50:27 -0700
From: [email protected]
To: [email protected]
Subject: Help with opening Adobe Reader and downloading updates
Under the help menu, there is an option to repair the installation of reader. Did you try that?
>

Remote and direct update of master data at the same time

Hello
Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
Thanks

Hi,
What do you mean by Remote Update ?
regards
Happy Tony

Conflict between Client object model and Item Updated Event Receiver in sharepoint 2010

Hello All,
As per my requirement I have a two custom list.
Agent Details
Port Name
Agent Details contains Agent code, Port Name, email, address and phone of Agent. Its possible that one Agent Code is connected with multiple Port Name.
Basically what I am doing is I am getting port name connected with Agent code, using jquery and bind those values with check box(using javascript created dynamically) and bind all with Div tag.
Now when my custom edit form of Agent list open up it shows me different port name binding with checkbox group.
when user select the check box and click confirm button my clicent object model script will run and add this selected value into Port Name list.
After confirm one more button named Save will enable asking user to edit the email, phone or address value and when I click on save my Item updated event fires which update the values of the selected port name(These port name I am getting from port
name list) to Agent Details custom list.
Now when I am trying to update the values my event receiver fires or some times it got stuck(not firing). So could you please help me the possible alternative for this requirements.
Can we user the Ecma Script(Client object model to preserve the value of selectec port) and Item updated event receiver on the same time?
Is anything am doing wrong then please guide me.

Hi,
As I understand, when you updated values in the agent details list the Item updated event receiver got stuck sometimes.
The item update event receiver will fire after the item has been saved, and the client object model script or the Ecma Script runs before the item is saved, so there is no conflict between the client object model script and item update event receiver.
You could find out the reason about the item update event receiver gets stuck by debugging the event receiver.
When you want to debug your event receivers, you have to attach to OWSTIMER.EXE and wait till they are executed. You can control this behavior using the Synchronization attribute. Also, if you’re looking for an easy way to debug an event receiver without
having to manually attach a debugger to your code, you can use the System.Diagnostics.Debugger.Launch() method.
The articles below are about how to debug in the event receiver in SharePoint 2010.
http://sharepoint-kings.blogspot.jp/2013/02/debugging-event-receivers-in-sharepoint.html
http://chakkaradeep.com/index.php/event-receivers-in-sharepoint-2010/
http://sharesaint.com/?p=77
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror to an AppleTV. The devices will connect, but the video monitors show only a blank screen. The AppleTV's work fine with various other iOS & OSX devices. Ideas?

I have three AppleTV's where I work. I have two at home. I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay. I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay. I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror. The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay. This is true on both networks: at home and at work. Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem. I have tried to "Reset All Settings." I have tried to "Restore." Does anyone have any suggestions? Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?

No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
The following information was helpful:
Big Apple fan
Re: AirPlay with AirServer connectivity problem
Oct 14, 2013 9:43 AM (in response to ceb2652)
This is an iOS 7 AirPlay mirroring bug...
To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
After this happens, mirroring to an Apple TV only projects a blank screen.
Once the mirroring is hung, the only way to fix it is to restart the iPad.
Apple please fix this iOS 7 issue!

Start up problems after Safari 3.1 and Security update

Updated safari and security update last night.
Safari downloaded and installed but there was an error downloading or installing the security update, I forgot.
After I restarted everything booted up fine, but was stuck on "Starting Mac OS X" screen.
Did a fsck and zap the pram, still stuck.
Today I tried booting up in safe mode, stuck on the gray screen with the apple logo.
Then I tried booting up from an external firewire dvd drive. Repaired permissions, repaired the disk, but it is still stuck on "Starting Mac OS X" screen. Help please...
Thank you

Ok i had a similar problem, with all the recent updates for Leopard, including the 10.5.2 combo update... the 12" PowerBook G4 kept getting stuck on the grey apple and spinning wheel... if it managed to get past this it would get stuck on the blue screen!!!
The way i got around this, after trying all these other tips was: Archived & Installed 10.5; restarted, waited; downloaded 10.5.2 Combo update, installed; restarted, waited; waited; waited; after getting back to desktop, restarted, waited; then ran Software Update only installing one at a time, and after each install, restarted, waited; when all Software updates completed, proceeded with iLife updates etc... It took a while (still quicker than the 3 days of failed installs and updates) with a lot of waiting on the blue screen (5-20mins) but we got there in the end. Disks where checked with Leopard Disk Utility before and after, permissions where checked before and after completing all installs, also with a DW 4.1 optimization. Also note worthy is the RAM was upgraded from the initial 256Mb (!!!) with an extra Gb.

SCCM Report for Applicable and Installed Updates Collection Wise

Hi All, I was looking for a report on Applicable and Installed Updates Collection Wise and got this below query on the Internet and want to create a SCCM report with this below query. How to make this query working in SCCM report?
Do I need to add prompts, if yes please guide me on adding prompts.
SELECT
DISTINCT
SYS.Name0
AS [Server Name], SIS.SMS_Installed_Sites0 AS [Site Code], UCS.Status AS [Patch Status Code],
CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status', UI.BulletinID AS [Bulletin ID],
UI
.ArticleID AS [Article ID], UI.
Title
FROM
v_R_System AS SYS LEFT OUTER
JOIN
v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER
JOIN
v_UpdateInfo
AS UI ON UCS.CI_ID = UI.CI_ID INNER
JOIN
v_RA_System_SMSInstalledSites
AS SIS ON SYS.ResourceID = SIS.
ResourceID
WHERE
(UCS.Status IN ('2', '3')) AND (UI.ArticleID IN ('972270', '974392', '973904', '969947')) AND (SYS.Name0
IN
(SELECT DISTINCT v_FullCollectionMembership.
Name
FROM v_FullCollectionMembership INNER
JOIN
v_R_System
ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
v_FullCollectionMembership
.CollectionID IN ('Collection ID'
ORDER
BY
[Patch Status Code]

Yes it can be done and please run the query which i have shared in the thread
I again pasted the query for you below..
SELECT DISTINCT
SYS.Name0 AS [Server Name], CASE WHEN UCS.Status = '2' THEN 'Applicable' WHEN UCS.Status = '3' THEN 'Installed' ELSE '' END AS 'Patch Status',
UI.BulletinID AS [Bulletin ID], UI.ArticleID AS [Article ID], UI.Title
FROM         v_R_System AS SYS LEFT OUTER JOIN
                      v_Update_ComplianceStatusAll
AS UCS ON SYS.ResourceID = UCS.ResourceID INNER JOIN
                      v_UpdateInfo AS UI ON UCS.CI_ID
= UI.CI_ID
WHERE     (UCS.Status IN ('2', '3')) AND (SYS.Name0 IN (SELECT DISTINCT v_FullCollectionMembership.Name
FROM v_FullCollectionMembership INNER JOIN
     v_R_System ON v_R_System.ResourceID = v_FullCollectionMembership.ResourceID AND v_R_System.Active0 = 1 AND
                                                   v_FullCollectionMembership.CollectionID
IN ('XXX00000')))
Kamala kannan.c| Please remember to click “Mark as Answer” or Vote as Helpful if its helpful for you. |Disclaimer: This posting is provided with no warranties and confers no rights

Query on material and quantity updation

I updated material and quantity updation for a particular material type and plant combination in development server. Before transpoting in transport request, when I View Cluster Maintenance: Data, I am able to see that in table T143M is also updated for some other plant and material types which I had not done in customising. Also note that for the entries in transport for all plant and material type combination other than intended one, there are no qunatity and value updating which had been activated. Can someone throw light as to whether is it a functional or techinal issue which is causing this?

Hi,
whenever your copping new material type from existing one it will copy all the setting ie screen reference , attributes and even quantity / value update also . so it will display like that .

Unable to run bapis for project status update and date update together

Hi Experts,
I have a requirement to update the dates and status of a project WBS at level 4. I am trying to do update the CJ02 Transaction using standard BAPI available. I need to do both Date update and status update in the same LOOP PASS   i am using the below mention bapi. when i am doing so i am getting an error Project 'A._____' has been currently processed by ID i.e. my id.
I have tried putting a wait for 2 seconds in the code but its still not working. please find the order below in which i am calling the bapi.
Loop at itab.
if date_changed = 'X'.
      CALL FUNCTION 'BAPI_PROJECT_MAINTAIN'
      READ TABLE it_error WITH KEY message_type = c_e.
      IF sy-subrc <> 0.
Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
   endif.
endif.
if Status_change = 'X'.
      CALL FUNCTION 'BAPI_PS_INITIALIZATION' .
      CALL FUNCTION 'BAPI_BUS2054_SET_STATUS'
      READ TABLE t_result WITH KEY message_type = c_e.
      IF sy-subrc NE 0.
        CALL FUNCTION 'BAPI_PS_PRECOMMIT'
             TABLES
                  et_return = t_ret.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = c_x
             IMPORTING
                  return = s_ret.
     ENDIF.
endif.
    WAIT UP TO 4 SECONDS.
endloop.

Try to use
SET UPDATE TASK LOCAL.
before each BAPI call.
Did you try to debug through your code, leaving sufficient time between BAPI calls? If it does work like that, then the above statement might help.

After AVG PC Tune up, software update message for security and stability update is available FireFox 3.6.18. Should I Update?

My Dell laptop (Operating on Windows XP) was hit with multiple viruses - I could not open Mozilla Firefox or any other applications for that matter. After much time and many attempts, I was finally able to install and run an AVG Scan and then an AVG PC Tune up. 4,559 problems found and repaired. After the repairs, I received the following message:
"Software Update - A security and stability update for Firefox is available: Firefox 3.6.18 - It is strongly recommended that you apply this update for Firefox as soon as possible. - an underlined link reading, "View more information about this update" and then 2 choices - "Ask Later" or "Update Firefox." Since part of the problem was with Firefox and some error messages pointed to that, I'm hesitant to click on any of the three options above. Can you help me to get past this error message, please. I am sending this from my home computer. Thank you. Diane

Sometimes the updater gets in a funny state - Go to http://www.mozilla.org/en-US/firefox/new/ and download the full installer. Close Firefox and run the installer

CRMD_IM_ML_HEAD and CRMD_EMAIL_LIST update

Similar Messages

Maybe you are looking for