Cross reference data from 2 different ecc system.

Hi Sdners,
Iam working on a scenario where i have to get data from two different Ecc system,consolidate them and send it back to their respective system.
But some refernce data in both the systems are different and when iam merging data from 2 system i have to maintain either of the reference data.But problem comes when i syndicate it back to ECC ,it cannot accept a new reference data.
Please suggest me some answere how to proceed in such case.
Its urgent.
Points will be rewarded for Genuine answeres.
Thanks in advance,
Regards,
Neethu.

Hi,
First enable keymapping property to YES for the table which you want to do
importing and syndicatig.
Create two remote systems type inbound/outbound .
Import the data from first remote system and map the corresponding fields.
Don't forget to map the remotekey field which is on the destination side.Make clone
of one of the dispaly field and map to the remote key field.
After importing you can see the records from which remote system are imported
using Edit Key Mappings option in DataManager.It shows that remotesystem
name and corresponding remote key.
Do the same for second remote system too.
After merging data in data manager , you can see the merged record and see the
two remote systems names and two remote keys by using Edit Key Mappings
option so the merged record goes back to both remote systems when you syndicate
the records.
Syndicate the data from first remote system by selecting destination properties and
output remote system property under map properties tab as your first remote
system.
Do the mapping for corresponding fields and don't forget to map the value field under
remote key .Then MDM generates remote keys for only records belongs to your
first remote system.You can see this in destination preview.It does n't genarate
remote keys for second remote system.Then check the option Suppress records
without key under map properties tab and execute the syndication.Finally we can
see the accurate records.
Do the same for second remote system too.
Hope it helps
Cheers
Narendra

Similar Messages

Loading of transaction data from SAP ECC system failed

Hi!
I successfully connected SAP ECC system to SAP BI system.
The following steps have been executed:
- user ALEREMOTE with max. authorization
- RFC destination
- Distributing Data model
- Generated Partner profile
- Maintaining message types in WE20
Now when I try to load any data from SAP ECC system the loading process in hanging in status "yellow" and never comletes.
[0FI_AR_4|http://www.file-upload.net/view-1447743/0FI_AR_4.jpg.html]
The following steps within Load process are yellow:
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Missing messages or warnings
Request IDoc : Application document posted (is green)
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Info IDoc 3 : sent, not arrived ; Data passed to port OK
Info IDoc 4 : sent, not arrived ; Data passed to port OK
Subseq. processing (messages) : Missing messages
Missing message: Subseq. processing completed
DataStore Activation (Change Log) : not yet activated
Question:
Can some one give me some technical steps (tcode, report) to solve this problem?
Thank you very much!
Holger

Hi!
Many thanks for your answer.
Via BD87 on BW system I detect that all the IDOC's (type: RSRQST) will be received from SAP ECC system.
Via tcode SM58 I could not detect any entries.
However the loading status from yesterday is set to "red".
The errors are:
Extraction (messages): Missing messages
Data Package 1 : arrived in BW ; Processing : 2nd processing step not yet finished
Info IDoc 1 : sent, not arrived ; Data passed to port OK
Info IDoc 2 : sent, not arrived ; Data passed to port OK
Can you investigate my issue again?
Thank you very much!

Set up for Extraction the data from SAP ECC system

Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
Holger

Hi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you!

Getting Customer data from Different R3 system to CRM

Hi Gurus,
I need to get Customer data from different R3 systems to CRM. But the problem is, the customer datas in these R3 systems have the same BP number, and the SD datas were defined same in these R3 systems. Thus, when ı try to fetch these SD datas to CRM, it overwrites the existing datas.
I have read different scenarios to solve this;
1. About Using Mapping.
2. About Working on different Clients.
Do you have any solution or suggestion? Need your Help...
Best Regards...

Hi,
The multplie backend scneario is supproted but wth restrictions and on a project basis. Unfortunealtey there's no simple document we can refer you to for this. You would need to involved SAP conuslting- please refer to note 1084315.
Best regards,
Brian.

Same material number Ciffing from different ECC system

Hello Gurus,
I have APO system connected with two ECC system.
If there is a material with the same name in both the system how does the APO system finds the respective system.
Even if I assign BSG for the logical systems, to which system will the transaction data will be transferred after planning?
Thanks,
Siva.

Although I do not have real-time experience working in this kind of scenario from what I understand there will be two product-codes based on the BSG.
Eg. HAMMER@BSG1 will be the Product code for material HAMMER coming from your first ECC system which is mapped to BSG1 and HAMMER@BSG2 will be the product code for material HAMMER comping from the other second ECC system that is mapped to BSG2.
Transaction data will then flow back from APO to respective ECC system based on the BSG mapping. Note in the Distribution Definition you maintain the connected ECC logical system name as well.
Hope this helps.
Thanks,
Somnath

How to call data from backend ECC system in Gateway Hub System?

Hi Experts,
We have a scenario where the GR process has to be done on Mobile app. We have a SMP 3.0 and Netweaver gayeway deployed as Hub.
I really need quick pointers on how should we go about this?
My queries are mentioned below:
1.I don't see SAP data in Gateway system.So will we need to create RFCs in ECC and call them in Gateway system.
2. Will we need to install IW_BEP in backend system? Can someone explain its real purpose?
3. How do we do our data modelling? How do i define it if I don't have my SAP data structures in Gateway system.
Your guidance will really be appreciated.
Regards,
Saket.

Hi sanket,
Answering to your second question,
IW_BEP Component is used to handle the events and actions activated in the SAP system and to publish these events and actions through SAP NetWeaver Gateway.
The BEP functionality enables you to:
Obtain and publish Business Object Repository (BOR) events without writing code. For example events raised as a result of changes in a business object: because of changes in a sales inventory, an event is raised and published to SAP NetWeaver Gateway.
Obtain and send events for SAP Business Workflow, for example, an event is raised for a workflow user decision step.
Obtain and send events from your code, for example, events raised as a result of implemented customer code, such as BAdI implementations.
Read more about IW_BEP at:
Business Enablement Provisioning (IW_BEP)
https://help.sap.com/saphelp_gateway20sp08/helpdata/en/a2/15f0b42f2948f6bb9e51f98e8c39e9/content.htm
Development with IW_BEP in SAP Netweaver Gateway
https://help.sap.com/saphelp_gateway20sp05/helpdata/en/64/472d8e21a342ba9d83e403ff4cd9db/content.htm
Hub Odata Channel without IW_BEP
http://help.sap.com/saphelp_gateway20sp06/helpdata/en/32/5895449ac74783a3bd80a782c82f85/content.htm
Regards,
KK

Pick up data from different legacy systems to an excel sheet...

I have to pick data from 4 different legacy systems into an excel sheet(mapping data available) and then upload whole data into SAP using transaction ME21N..How should i proceed..
I have to create 4 separate files first and then transfer the combined data into an excel sheet...Plzz explain the steps??
Also explain how to append data of one file to another and den combine whole into an excel sheet.
Assume that the 4 files have same number of fields 40 .
please give me the detailed steps..by an example if possible

Hi
Using Excel Conversion u have 2 arrange the values. After u upload the dat through BDC or LSMW.
Regards:
Prabu

Webservice:get data from SAP ECC

hi,
i want webservice.that webservice will fetch the data from sap ecc system.
i need steps for creating webservice.i have some functionality .what can i expose as webservice.
thanks
raj

Hi Raj,
If we trying to fetch data from SAP ECC system then expsoing as a web service from NWDS (Netweaver Developer studio ) would the best option.First we need to create a Portal Service that invokes the functionalities of the SAP application component( Business solution which uses ECC) using the SAP Java Connector. Then you can create a Web Service from the Portal Service.
If your SAP application component runs on SAP Web Application Server (WebAS) 6.20 or later, then you can directly enable Web Services on the application component by using the application server's native Web Service capabilities.
1. To turn on the WebAS 6.20 SOAP Processor, you need to:
Configure the Internet Communication Framework (ICF) of the WebAS to start the Internet Communication Manager (ICM) and activate the HTTP protocol support
Use transaction SICF to activate the SOAP Runtime Handler: default_host -> sap -> bc -> soap -> rfc.
Once the SOAP Processor is turned on, the RFM-implemented Web Services can be invoked at http://<host_name>:<port_number>/sap/bc/soap/rfc
6.20 also provides a Web Service Browser, which is a BSP web application that can be used to browse all RFM-implemented Web Services in the system, and generate WSDLs for these Web Services.
2. In a WebAS 6.40-based SAP application component, such as SAP Enterprise Core Component (ECC) 5.0, or a WebAS 7.0-based application component, such as ECC 6.0, by default, few Web Services are pre-delivered by SAP. But it is pretty easy to create Web Services in a WebAS 6.40-based system.
Inside-Out Approach: if within the SAP application component there already exist one or several RFMs or BAPIs that suit your needs, you can create Web Services based on them without any additional programming. The basic steps include:
Using the Service Definition Wizard, which can be started from transaction SE80, SE37, or BAPI, to create a (Web) service definition from an RFM, a function group, or a BAPI.
When creating the service, you have the option to rename or hide operations (methods) and parameters, define default values for parameters, and changing parameter types.
After the service definition is created, you need to use transaction WSCONFIG to release the service definition for the SOAP runtime.
Afterwards, by using transaction WSADMIN, you can for any released Web Service, call the Web service homepage which provides utilities for using and testing the Web Service, generate WDSL, configure the logging and tracing settings, and publish the Web Service as a Business Service in an UDDI registry.
Hope these steps are helful to you.
Regards,
Shaila

How to fetch data from different sources into one source (like into Ztable)

hi friends,
As per our client requirements they want to develope an Inventory and an Ontime delivery report in BO on top of Oracle database.
Situation is some thing like they have ECC 6.0.and they want to collect all inventory and ontime delivery data at one place.According to me that could be one Ztable in which we can gather all data.Apart from that they are going to use Data Integrator in which they can directly fetch the data from R/3 system(They dont want to have BI system) and put all data in Oracle DB.On top of ORacle BO person can develop BO reports.
My question is how to fetch all data at one place and what are the tables going to be use.
kindly help me out as its very important project.
Thanks
Abhishek

The following is my standard reply to those who need to get old data from a backup in one account and add it to another account. The method described here may be applied to your case. It would be a bit of a long process, though.
When connected to the account you want to GET data from, Go to Settings>iCloud and turn all data that is syncing with iCloud (contacts, calendars, etc.) to Off.
When prompted choose to keep the data on the iPhone.
After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using a different Apple ID and turn iCloud data syncing for contacts, etc. back to On. When prompted, choose Merge. This will upload the data to this new account.
Note that this only affects the "Apple data" like contacts, calendars, reminders, etc. Many third party apps also use iCloud to store data files there. These files may be lost in the process, unless the apps also keep the data locally on the device.
NOTE: Photos in the photo stream (if you use it) will not transfer to the new account. It is advised that you save the photos to a computer before performing the account switch.

Migrate Closed Sales Data from one SAP system to Other

Hi,
We have a requirement to migrate Closed Sales Order data from one SAP System to the New SAP system.
Please share your thoughts on the considerations / DOs and Donts for such cases.
Appreciate your response.
Kind Regards,
Tanuji

Hi,
If you want to migrate closed SOs..then first consider why? and from what date i.e how long back?
Following are the considerations:
1) You can't get the creation date same as your previous system dates--this might lead to incorrect reporting. So you'll have to check if its really worth?
2) You might want to have a reference no somewhere in the new transactions from the previous system.
3) If you want to migrate the deliveries, invoices then you've to consider also GL migration as well as payments.
Regards,
Raghu.

Extract work order data from r/3 system in flat file(csv)and export to BI

Hi,
I am new in interface.
I need to extract data regarding actual cost and quantities of work assigned to Service Providers from SAP system and send it to BI for reporting purposes.
This interface will extract Master data as well as transactional data. Extraction of Master data will be a full extract and that of transactional data will be Delta Extraction.
Custom development will extract the data from different fields and will export it to flat files (CSV format). This program will amalgamate all the flat files created into one big file and export it to BI system.
Export of data to BI system will be done by schedule program Control M, which will export the data from SAP system to BI system in batches. Control M is expected to run daily at night.
Please provide the step-by-step proces to do this.
Thanks
Suchi
Moderator message: anything else? please work yourself first on your requirement.
Edited by: Thomas Zloch on Mar 25, 2011 1:21 PM

Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael

Single query to get data from different databases

i need to capture certain fields from certain tables in database 1 and certain fields from certain tables in database 2 into one file using a single SQL statement.
i tried searching on the net
i found that dblinks can help
but iam not sure if ill be able to create dblinks in my situation which is:
i need to get data from oracle to be copied to mysql
this is not a replication acitivity, but i need certain fields from one database and certain from the other
so what iwas thinking is, if i use an sql query to get all the fields (i need around 40) from the different oracle databases and create a singlefile with one insert per select, i can then read that file into mysql
instead of creating multiple sql queries for each table and creating separate files and eventually separate tables in mysql.
can anyone help me here?
or maybe suggest another approach.
thanks

Hi,
I think dblink is the only option available to get data from different databases. It will work for your case too.
CREATE DATABASE LINK db_link CONNECT TO user_name IDENTIFIED BY password USING 'instance_name'you must have the system privilege 'create database link' to create db links. This way you can get the required data and put it in a table in oracle. But i dont know how to put this data from oracle table to Mysql.
HTH
Muneer

Extract data from Retai & AFS system

Hi , Guys,
If there are SAP Retail & AFS system with different master data and transactional data , how can I extract master data and transactional data from these two system into SAP BW?
For example , if i want to extract the stock management data , how do I create the two Souce system in BW, both as SAP souce system or not?
Thanks !

Hi Yong,
1. Should I create both systems as SAP source system or not?
Yes, both should be created as SAP source systems.
2. If I want to extract the master data of 0MATERIAL , should I do the extraction job from the two source system with "0LOGSYS" ?
You have to understand the business process of how material master data flows across these two systems with the help of the functional team.
In our scenario, we have not used '0LOGSYS', because the same material code coming from both the systems were one and the same.
3. If I want to extract the transactional data of stock movement data from both systems, which infocube in BI content can I use?
I suggest you implement standard business content ( 0IC_C03, I guess ) and utilize that for one source system ( Say AFS). Copy this cube into Z cube called ZIC_C03 and connect the retail data sources to this cube. If you want to combine stock reporting from both the systems, you can create a multiprovider on top of this.
Thanks,
Krishnan

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

How to load master data from 2 source system without using 0logsys as compo

Hi Gurus,
I am working on a project which has 2 source systems.
Now I have to load master data from 2 source systems without making 0LOGSYS as compunding attribute. Because all the objects which i want to use compunding attribute are reference objects for lot of other info objects. So, i dont want to change the business content objects structure.
So, please help me out providing logic.
thanks in advance
Peter.

Hi Peter,
Can you brief me how did you resolved your issue?
Regards
Utpal

Cross reference data from 2 different ecc system.

Similar Messages

Maybe you are looking for