Crystal report Visual studio 2003 - report load failed. please help!!

Post Author: swapneel_d14
CA Forum: .NET
Hello,
Some Background -
Few months back my company has purchased a project which is developed in VS 2003 and on Framework 1.1 from a third party. This project is installed on user's machine (obviously with Framework 1.1).
Glitch is here u2013 VS2003
But now I need to make some amendments in this project, so I installed VS 2003 Enterprise Edition (Setup downloaded from MSDN) and when I open up this project u2013I couldnu2019t open some reports in design mode.
I get below errors u2013
Custom Tool Error : "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.CrystalREports.Engine.LoadSAveReportException.Load Report Failed.
Then I tried to open same report in VS 2005 on Framework 2.0, I can open this report in design mode easily with no errors. In fact I installed Crystal report 9 on my machine and able to open this report in design mode.
Please could you help me, how to resolve this problem. How to refer Crystal 9 version references in VS 2003.
Many Thanks.
I believe this Crystal Reports managed assemblies are version 9.2.3300.
Regards,
Swapneel

Typing the terms "pdf export hyperlink crystal" in the search box at the top right corner of this page comes up with the following KB (5th hit):
[Hyperlinks to files do not work when exported to Portable Document Format (PDF)|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313336333633363337%7D.do].
"Messed" up report export to RTF does not tell me much either. A link to a screenshot will be great.
Also, what CR Service Pack are you on?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

  • Crystal Reports Visual Studio 2010 Report Viewer Not Rendering

    Hello,
    I was able to get Crystal Reports deployed in a web application in VS 2008 OK, but now I am having trouble with CR and VS 2010. For some reason the data and images for the report are being displayed,  but the report viewer controls and background are not. I am not getting red Xs, the viewer is just not there. I have tried changing my references, I have installed the CR run time, and all permissions are correct. I am trying to get this up and running on the local machine. Has anyone dealt with this problem before?
    thanks.

    See if [this|Report Viewer not displaying on deployment server; thread helps.
    - Ludek

  • Error when running the Crystal Report 9.1 (visual studio 2003) in the deployed server

    Hello,
    1) I am suddenly getting an error message ‘Load Report failed’ in a production server (where the VS2003 application is deployed) when the Crystal Report is executed. This has happened maybe because of the Windows/Crystal Report Updates!
    I am able to see the same report perfectly fine in the development computer using VS 2003.
    I am using the 9.1 version which is part of the Visual Studio 2003.
    The event logs show 'Either the keycode library is not registered or it cannot be loaded ...EventID=10029'. See attached screen shot.
    Please help?
    2) Since I was getting a registration suggestion window  for using Crystal Reports, I registered twice using different email address and it said that it will send me the KeyCode for the Crystal report but after successful registration I never got any keycode but just an email acknowledging the Registration.
    I believe the KeyCode is required to use it in the server to execute/run a report.
    Can SAP representative email the keycode to my gmail account?
    My product key is: 
    Please help to resolve both my problems
    Thanks in advance,
    Sanjay Chudasama

    If I memory servers, you have to open the Crystal_Regwiz2003.msm in the .NET deployment project. One of the properties of the msm was Keycode (or similar). You entered the keycode here. To find your keycode; in VS2003 IDE, go to the Help | About screen. You will see one of the installed components as Crystal Reports and the keycode will be on the right of that. Copy the keycode from here, paste in the above.
    For more details see the article Crystal Reports and Visual Studio .NET - Application Deployment.
    - Ludek
    Follow us on Twitter
    Got Enhancement ideas? Try the SAP Idea Place
    Share Your Knowledge in SCN Topic Spaces

  • Crystal Reports XI : Visual Studio 2003 to Web Server Deployment

    Post Author: Shaun
    CA Forum: Deployment
    I am having trouble deploying my web application to my web server. I created the web app using the crystal reports version that came with visual studio 2003 on my localhost. Then, I bought Crystal Reports XI for the server I would like the web app to be on. Once CR XI was installed on the server, I deployed my web app and included the dll files from the C:\Program Files\Common Files\Business Objects\3.0\managed directory.  Now I receive the following error; The located assembly's manifest definition with name 'CrystalDecisions.Web' does not match the assembly reference. I changed both the aspx file and the web.config files assemly versions to match. I still receive the same error.

    Hi Henrik,
    First of all you didn't make any mistake installing CRVS2010. It has assemblies with version 13.x
    Now as far as patches are concerned ensure that you are on SP2. You can get runtime and patch from following:
    http://www.sdn.sap.com/irj/sdn/crystal-xcelsius-support?rid=/webcontent/uuid/d01fdad8-44e5-2d10-61ad-9d2d4158f3a8
    You can opt for AD.NET as one of the datasource but what is the error/ warning you get when you use Web Serive as datasource?
    You can find the latest samples created for CR2008 here
    http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d0bf8496-2a81-2b10-95ac-b1f48d5b63f5
    - Saurabh

  • Crystal Reports Visual Studio 2010 SP2 Fixed issues

    Hi All,
    Here is the list with fixed issues in Crystal Reports Visual Studio 2010 SP2
    http://www.crystaladvice.com/crystalreports/crystal-reports-2010-sp2
    The following list with issues is fixed:
    1566763 - CRVS2010 WPF Viewer error; "System.NullReferenceException was unhandled" PageControl.OnMouseMove
    1540637 - Error: External component has thrown an exception. Launching the Database Expert in the embedded Crystal Reports designer in Visual Studio
    1544675 - Error; 'Object reference not set to an instance of an object' when using the CR WPF viewer in VS2010
    1578823 - CRVS2010; "Load Report Failed" error when Report is open in any full version of the CR Designer
    1638191 - Using RTL language (Arabic) the CR viewer Group Tree Panel does not display RTL
    1631283 - Error; 'Failed to load database information' when reporting off of file system data
    1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
    1299185 - Error: Operation not yet implemented or Failed to Export, when exporting a Crystal Reports to Text format
    1451960 - Null or empty values are not surrounded with delimiter when exported to CSV format
    1659185 - The special Crystal Reports field, 'File Name and Path' shows temp path and temp name when viewing a report
    1452648 - Dynamic Cascading Parameter prompts two times when using the Crystal Reports in VS .NET
    1580338 - When refreshing a report that contains a linked subreport report takes long time to execute
    1659111 - GCHandle left in memory for each open and close of a Crystal Report in VS2010 application
    1356672 - Crystal Reports special field "File Path and Name" displays incorrect information in a Visual Studio .NET application
    1593658 - Impersonation of database Log On credentials failure in report generation when set at runtime in a .NET application
    1661239 - Summary fields are converted to String fields
    1661276 - Using the Crystal Reports SetTableLocation method in VS .NET causes long report processing delays
    1661200 - Not able to copy text from report objects using the Crystal Reports WinForm viewer for VS .NET
    1631722 - Date function in a Selection Formula is removed when running a report in a VS .NET application
    1525822 - Exception "Object reference not set to an instance of an object." thrown when clicking on Parameter Panel button in Crystal Report .NET Windows Form Viewer
    1603082 - Cross-tab background colors not retained when exporting a report to PDF format
    1603154 - Shared variable display the incorrect value in Crystal Reports
    1427747 - Why does a CR .NET SDK web app have problems running on IIS 7 in integrated pipeline mode?
    1545536 - Alignment set to Justify causes broken underline
    Source: Resolved Issues in Service Pack 2 for Crystal Reports for Visual Studio 2010
    With kind regards,
    Pieter Jong
    Crystal Advice
    http://www.crystaladvice.com

    Many thanks for the link Pieter.
    I recently created a wiki that lists all of the fixes, their tracking numbers, associated Kbase numbers, Kbase titles and links to the kbases:
    http://wiki.sdn.sap.com/wiki/x/tgK3Dw
    It's 90% complete. I think I have a few Kbases to do to complete it.
    Now that I think about it, I'll also add the link to the [sticky thread|SP 2 for Crystal Reports for Visual Studio 2010 released!; re. SP2 release.
    - Ludek

  • Class not registered error in Visual Studio 2003

    Post Author: LenReinhart
    CA Forum: .NET
    I have an report that has been running in an application for the last couple years. There is an error in the application that I fixed, but now the report  is not running against the production database and I wanted to look at a report in the editor and double clicked on the report in Visual Studio 2003. I got an error pop up "Class not registered" but that was it, no option to enter a registration code or anything. I had previously registered but tried going through that process and was told that it had been previously registered. I developed this report on this machine, so I am wondering if some patch that I applied caused this problem. It has been awhile since I have opened this report in an editor.Any light you can shine on this would be appreciated. Thanks,Len

    Post Author: MJ@BOBJ
    CA Forum: .NET
    Typically that error is referring to a COM dll that is not being loaded because it is not registered on the system.  Usually, that error message will give you a dll name, or a PROGID, or something.....was anything else provided in the error?
    In order for a file to be unregistered, something might have been uninstalled (or a failed install) that could have caused this issue.  I did a search in kbase and found a article that may help, at least it refers to a dll that you can try to register.
    Perhaps doing a reinstall may resolve the error.
    -MJ

  • Adobe Reader 7.0 issue with Visual Studio 2003

    I'm working on a windows form using Visual Studio 2003(Dot Net Framework 1.1) and has got a PDF Viewer in that application to show the reports in PDF Viewer (Adobe Reader 7.0). After adding the reference of COM component (Adobe Acrobat 7.0 Browser Document), I'm unable to build my visual studio solution because of an error "Unable to emit assembly: Referenced assembly 'Interop.AcroPDFLib' does not have a strong name". The same visual studio solution works fine with Adobe Acrobat Reader 6.0. Pleae help me to overcome this issue...

    Hi tristan,
    how are you doing ?
    as per the pre req for NCo,
    u're JRE is requested to be : 1.3
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
    i successfully use j2sdk 1.4_13, but i am aware of issues when you use jdk 1.5 for other SAP [Portal] related products, try jdk 1.4_12 or 1.4_13 and see if there is any difference
    also is there any requirment for VS 2003 & 2005 on the same machine ?
    i am curious to understand the problems you are facing with this config
    with respect,
    amit

  • Microsoft Visual Studio - Unable to load DLL 'librfc32.dll'

    Hi,
    I'm experiencing the following problem:
    When trying to establish a connection between SAP BPC MS and our SAP NW BW system.
    I've created a new Integration Services project in Business Intelligence Development Studio. The issue comes up when I try to test the connection:
    TITLE: Microsoft Visual Studio
    Unable to load DLL 'librfc32.dll':
    This application has failed to start because the application configuration is incorrect.
    Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
    I've placed the librfc32.dll library file on C:\WINDOWS\system32\.
    I ran R3DLLINS.EXE according to Note 684106 - Microsoft runtime DLLs.
    This placed all the needed dll library files (msvcr71.dll, msvcp71.dll, mfc71.dll, mfc71u.dll) on the correct path (C:\WINDOWS\system32\).
    I keep getting the same error.
    Platform:
    Windows 2003 R2 SP2 32-Bit
    MS SQL Server 2008 SP1
    SAP BPC 7.0 Microsoft Platform
    I've checked out some other posts on SDN but it didn't solve my problem:
    Re: librfc32.dll not found on Windows Server 2003
    LIBRFC32.DLL not Found Error
    Re: librfc32.dll
    Any ideas?
    Thank you.
    Bruno Pereira
    Edited by: Bruno Pereira on Mar 23, 2010 5:34 PM
    Edited by: Bruno Pereira on Mar 23, 2010 5:36 PM

    I was able to work it out.
    For your reference:
    Issue arrises from the fact that Business Intelligence Development Studio isn't able to load the librfc32.dll without the [Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update |http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-40ff-b072-9112bab119c2&displaylang=en#filelist]implemented on the system.
    Reference SAP note:
    [Note 684106 - Microsoft runtime DLLs|https://service.sap.com/sap/support/notes/684106]
    Bye!
    Bruno Pereira

  • Unspecified error using odt in Visual Studio 2003

    Hello all
    We have Windows XP SP2.
    We have installed ODT version 10.1.0.4.00 on our workstation. We have MS Visual Studio 2003. We have the Oracle client 10.1.0.2.0.
    We also have Oracle data access product 10.1.0.4.0.
    When I try to access Tools - connect to oracle database, I get the error : "unspecified error". I get the same error back if I try to exit Visual studio. I have to kill the process to exit. I have the same thing using View - Oracle Explorer.
    What could be wrong ?
    Best regards
    Gaetan Labrecque

    Post Author: MJ@BOBJ
    CA Forum: .NET
    Typically that error is referring to a COM dll that is not being loaded because it is not registered on the system.  Usually, that error message will give you a dll name, or a PROGID, or something.....was anything else provided in the error?
    In order for a file to be unregistered, something might have been uninstalled (or a failed install) that could have caused this issue.  I did a search in kbase and found a article that may help, at least it refers to a dll that you can try to register.
    Perhaps doing a reinstall may resolve the error.
    -MJ

  • NCO 2.0 issue with Visual Studio 2003

    Hi,
        I was attempting to use the SAP Connector for .Net version 2.0 on a machine that has both Visual Studio 2003 and 2005 installed. However, I cannot seem to get the wizard to work correctly in either one. On VS2005, the SaP Connector doesn't even show up in the project types. On VS2003, it does, but the wizard screen doesn't come up. Instead, I am forced to use the Server Explorer toolbar to search for RFC and BAPI functions. I used the guide published by Anne Tarnoruder, Reiner Hille-Doering regarding this subject (Using SAP Connector for MS .Net (NCO) in Microsoft Visual Studio 2005), however, whenever I add an SAP Connector Proxy item to a project, it generates a half-done SAPProxy1.cs and the requisite .wsdl designer file. After selecting one or more RFCs via the SAP server explorer toolbox and dropping it to the proxy designer, it doesn't appear to update the half-done SAPProxy1.cs. Is this the way it is supposed to work? I am using XP with SP2 and Java 1.5 update 11.
    Regards,
    Tristan

    Hi tristan,
    how are you doing ?
    as per the pre req for NCo,
    u're JRE is requested to be : 1.3
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b4/79cb9463b89a41a73e1e2805eb4bf7/frameset.htm
    i successfully use j2sdk 1.4_13, but i am aware of issues when you use jdk 1.5 for other SAP [Portal] related products, try jdk 1.4_12 or 1.4_13 and see if there is any difference
    also is there any requirment for VS 2003 & 2005 on the same machine ?
    i am curious to understand the problems you are facing with this config
    with respect,
    amit

  • Acrobat 9.0 + Visual Studio 2003

    Hello Folks,
    I have a query regarding Acrobat 9.0 and Visual Studio 2003.
    In our project we are using Acrobat 9.0 SDK to develop an application that already has support for Acrobat 8.0.But we are facing some problems in aspects like Securing a document by password, adding watermark etc where the Acrobat 9.0 crashes.Should we use Visual studio 2005 to develop this application or Visual studio 2003 is sufficient?
    While looking into the samples provided in Acrobat 9.0, they open only in Visual Studio 2005. And also a folder in the headershas been changed from the previous version ( ADM has been removed and 3D has been added).
    Please correct me if i am wrong.
    Regards,
    Hari

    Post your question in the Acrobat Developers SDK forum.

  • ODT 10.1.0.2.0 on Visual Studio 2003 problem

    I have installed the ODT 10.1.0.2.0 on Microsoft Windows XP sp2, Visual Studio 2003 and database Oracle v9.2.0.7.0.
    I have create the example project like the example in http://www.oracle.com/technology/oramag/oracle/06-sep/o56odp.html, bat when I execute on the con.Open(); instruction I receive the error:
    "Eccezione non gestita di tipo "Oracle.DataAccess.Client.OracleException" in oracle.dataaccess.dll"
    "Informazioni aggiuntive: Errore di sistema."
    What's the problem?
    Thanks.

    Hi cshay,
    I've done what you asked me.
    When I don't check Tools -> Oracle Application Debugging, from the Visual Studio menu, there isn't ORA_DEBUG_JDWP in the environmental variables list of the devenv.exe process.
    When I check Tools -> Oracle Application Debugging, from the Visual Studio menu, there is ORA_DEBUG_JDWP in the environmental variables list of the devenv.exe process and his value is ORA_DEBUG_JDWP=host=XP175102;port=49152 .
    I've also tried to unset ORA_DEBUG_JDWP in the application code, in this case the devenv.exe process has ORA_DEBUG_JDWP=host=XP175102;port=49152, my application's process has ORA_DEBUG_JDWP without any value and OracleDebugger.exe process has ORA_DEBUG_JDWP=host=XP175102;port=49152. The application works without any errors, but I'm not able to debug oracle store procedure, it doesn't stop where I have set breakpoint.
    Bye.

  • No SAP Connector template in Visual Studio 2003

    Hi,
    We installed Visual Studio 2003 and SAP Connector SAP.Net.Setup_2.0.msi and I don't have the SAP Connector template when  I want to create a new project.

    I found the solution : be carrefull about the SAP Connector release SAP.Net.Setup2003.msi

  • SAP logon pad with NCo and visual studio 2003

    Hi All,
    I'm struggling to find a way in visual studio 2003 utilising the dot net connector to allow the user to select the SAP system, client user name and password in a similar way that happens when done with activeX controls.
    E.g. with ActiveX this sort of code:
    Dim sapConn As Object 'Declare connection object
    Set sapConn = CreateObject("SAP.Functions") 'Create ActiveX object
    If sapConn.Connection.Logon(0, False) <> True Then
    The false in the last line prevents a silent logon i.e. a little pop up window is created with the server, client etc. for the user to select and fill in.
    I have been trying to use methods like availabledestinations and getdestinationbyname as well as the destinationname property of the saplogon proxy I dropped on my form. In fact I can see all the destinations when I drop down on the destinationname property on the proxy logon object. I though of maybe binding this to a list box but I can't seem to get that to work.
    I also tried setting the SAPgui value to 0,1 or 2 on the proxy logon object but this had no effect.
    Is there not a simple way of doing this similar to the ActiveX approach?
    PS. This is a windows forms project and not a web project.
    Thanks,
    Grant.

    Hi Jitesh,
    Thanks for the quick response!
    I declared _e as an iDictionaryEnumerator, is that correct?
    So the code looks like this:
    Dim _e As IDictionaryEnumerator
            For Each _destEntry As System.Collections.DictionaryEntry In SapLogonDestination1.AvailableDestinations
                Dim _destText As String = _e.Value.ToString
                Dim _destKey As String = _e.Key.ToString
            Next
    I get a Nullreference error: Object reference not set to an instance of an object at the line Dim _destText As String = _e.Value.ToString.
    What have I done wrong?
    Thanks,
    Grant.

  • Visual studio 2003 DIALOG - DIALOGEX dialog not shown

    Hi,
    when using visual studio 2003 to edit resources, it changes DIALOG to DIALOGEX automatically for some reason (even when editing only the text on a button in the dialog). When we call 'Modal' from ADM's Dialog suite, the dialog is not shown in illustrator cs2 (but it does disable all menu's! So illustrator hangs).
    This happens only when the dialog is declared in the rc file as DIALOGEX, not when it's declared as DIALOG.
    Is this something in our code, or a illustrator bug, or something else? Any way to fix this (I can edit all DIALOGEX back to DIALOG by hand, but that's not a very good solution to me). Or is there a way to stop VC++ 2003 changing DIALOG to DIALOGEX?

    Yeah, this has been a problem for a long time. I just hand edit the file (including the DIALOGEX -> DIALOG), since as you point out, you need to alter the FONT line anyways (which I just entirely remove).
    At one point I had a segex pre-build step that simply did all this for more, but somewhere along the line this got dropped from my project. I've filed a bug about this on a couple of CS* betas, but no dice as yet. The last time I did so, it was suggested to me to try EVE, which I will when I get a chance.

Maybe you are looking for