CS3 VB how to get reference to a text frame?

Hi there,
I got a text frame in a document with a table inside. In first cell of the table there is another text frame with table. How to get a reference to the first text frame from the frame inside of the cell?
text frame in a cell has a character as parent, character has a cell as parent, cell has table as a parent - in this place there should be the right text frame as a parent of a table, but unfortunatly there is a story! so any idea how to get the text frame from there?
regards

thx again Harbs,
believe me - I am watching all stuff at the watch window of VB6 - there is not even one insertion point which has a ParentTextFrames - if I try to adres it I get an error. VisualBasic do not allow syntax like InsertionPoints[1] - it allows something like this:
InsertionPoints(1) but it is the same like InsertionPoints.Item(1). In both cases it doesn't works - all object has ParentTextFrames.Count = 0.
Anyway I found a solution for my problem:
innerFrame.Parent.ParentStory.TextContainers.Item(1) is the right text frame - don't ask me why....
regards

Similar Messages

How to get the UIDRef of Text frame associated with hyperlink?

Hi,
I have a document which contains Text hyperlinks . I am able to get the number of hyperlinks present in document using "IHyperlinkTable" and text range to which hyperlink is associated using interface "IHyperlink".
InterfacePtr<IHyperlink> hyperlink(tableDb, table->GetNthHyperlink(i), IID_IHYPERLINK);
if(hyperlink)
hyperlink->GetName(&sHyperlinkName); //sHyperlinkName is text to which hyperlink is associated
now I need to find the UIDRef of Text frame with which hyperlink is associated.
I can get the UIDRef of "Image frame" using interface "IHyperlinkPageItemSourceData".
InterfacePtr<IHyperlinkPageItemSourceData> sourceHyperLink (tableDb, hyperlink->GetSourceUID(), UseDefaultIID());
if (sourceHyperLink)
UID sourceHyperLinkUID = sourceHyperLink->GetSourceUID();
but this interface may be not helpful in case of text in the frame (word/words) associated with hyperlink.
If anyone has done this please do let me know.
Thank you all in advance.
Priyanka

Hi All,
I am still unable to get the solution of this issue. If anyone has done this please help me to find the solution.
Thanks in advance.
Priyanka

How to get reference of a SessionBean From RemoteClient

How to get reference of a SessionBean in a ApplicationServer from another SessionBean running in Another ApplicationServer

Hi
There is a method, getHandle() on the EJBObject interface that your remote interfaces extend. This handle can be used to pass a reference to an EJB to someone else (possibly running in another JVM). You can then call getEJBObject() on the Handle instance and get your remote interface on which you can call methods. Should be able to cast it to your specific bean.
I haven't done this, so definitly test it out, but I think this is what you want to do.
check it:
http://mail-archive.objectweb.org/jonas/2000-12/msg00064.html
I suggest u not to go for more complex code, make it simpler, or if its really required use it as a webservice
Regards
Abhijith YS

How to get Reference on files of my ADF Shared Library

Dear All,
Use case:
I have compiled one project into a shared ADF library. This project has a ViewController.
In it are some common css files that I would like to reuse.
Now, I have a new project and have linked to that ADF library using Resource Palette.
In my JSFF file, I tried to link to the CSS in my shared library
<af:resource type="css" source="/com/test/common.css"/>But I cant seem to get the styleclasses in that shared library.
I have checked at Firebug console and I notice that I am getting a 404 when I am requesting for the said file.
What should be the correct path for me to get a reference to the CSS Files?
Thanks
JDEV 11G PS3

Duplicate of How to get Reference on files of my ADF Shared Library
Edited by: Bijesh Krishnadas on Aug 17, 2011 9:13 PM

How to get the values from repeated frame?.

Hi
how to get the values from repeated frame?. i have to disply the first 3 digits in another place in my report.
i have field empno in repeated frame and i want to disply first 3 digits in another place in the same report.
thanks

How often do you need to display it? It sounds like you might want to base a summary on that formula with a function of first or last. If it's a per page basis, it can be a page level summary. If it's at a higher level repeating frame, then you can create the summary at that level. I'd suggest taking a look at the online help for summaries using the first/last functions.
Hope that helps,
Toby

How to get the footage's current frame number in expression?

There are 2 layers.One is text layer,one is sequence layer.
Footage has begun from the 20th frame.
Therefore, the number of composition's current frame number and footage's frame number has shifted.
I want to show footage's frame number in text layer . not composition's frame number.
How to get the footage's current frame number in expression?
Tatsuya

>Footage has begun from the 20th frame.
Do you mean that the footage layer has been trimmed (so that the start of the footage lines up with the start of the comp, but the first 19 frames are not visible), or moved to the left (so that frame 20 lines up with the comp's frame 0), or that the sequence actually begins with the 20th frame (at frame 0 of the comp), or something else?
Are the frame rates of the comp and the footage the same?
Dan

[CS3][JS] How to get the file type of current document

Hi,
How to get the file type of current opening document (e.g., tif, jpeg, png) using JavaScript with Photoshop CS3.
I am using file object the open the files one by one in the folder (the files sometimes don't have the extensions).
If the current document is in tiff format then I need to convert to 8-bit, if its an Jpg image then needs to ignore the file.
Regards,
Karthik

Do you really need to know the file type? What about just checking the bit depth?
var doc = activeDocument;
if (doc.bitsPerChannel != BitsPerChannelType.EIGHT) {//Not 8 bit
doc.bitsPerChannel = BitsPerChannelType.EIGHT;
//do your save etc
}else{
//Ignore

[CS3 Win]: How to get active spread and layer ?

How to get the active spread and layer in an Indesign CS3 document?

I found the answer (I wanted active spread and page): active Spread: InterfacePtr<ILayoutControlData> layoutControlData(gContext->GetContextView(), UseDefaultIID()); UIDRef uidRefSpread = layoutControlData->GetSpreadRef(); active page: UID uidMyPage = layoutControlData->GetPage(); UIDRef uidRefPage(fCHMLDocRef.GetDataBase(), uidMyPage);

How to get references to project´s entities?

Hi there,
is there any straightforward way of getting reference to project´s entities? The idea is get a collection/array of all the entities enumerated at the persistence.xml via some JPA class. Is this possible?
Thanks for any hint!

Hi
   You should not set the attributes at the DOINIT, as the view will not be created that time.So what i suggest is , create it DOMODIFY .
As i said in my previous post , create five attributes in the component controller.
like l_view1,l_view2,l_view3...etc. of type if_wd_view_controller.
And now go to each view's modify method. And write the following code.
Data: lo_api               TYPE REF TO if_wd_view_controller.
If first_time = 'X'.
lo_api = wd_this->wd_get_api( ).
wd_Comp_Controller->l_view1 = lo_api.
endif
And you could access this view controller , anywhere u want by using wd_Comp_Controller->l_view1
Thanks
Anzy
Award points if this solves your issue.
Message was edited by:
        Mohammed Anzy S

How to get the current location text in JTextPane

hi
i want to get the current location text in JTextPane ...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can get current Locatin data ...
pls help me

If I understood your request, what you would like to do is to be able to retrieve Start and End Positions of a given line (a line and NOT the whole content of the JTextPane).
JTextPane is a graphical component that is bound to a logical document. Documents are structured in elements. What defines an element is up to you to decide if you extend your own document but elements are by default paragraphs (runs of text ended by a carriage return '\n' character). So, I think that what you want to do is to retrieve the Start and End positions of the
paragraph over which the caret is currently positionned. Then I think you have got to do the following :
int intStartPos;
int intEndPos;
int intCaretPos;
javax.swing.text.StyledDocument docStyledDoc;
javax.wing.text.Element eleParagraph;
intCaretPos = jtpMain.getCaretPosition( );
//Get a reference to the default styled document bound to the JTextPane component
docStyledDoc = jtpMain.getStyledDocument( );
//Get the paragraph element from the document over which the caret is positionned
eleParagraph = docStyledDoc.getParagraphElement(intCaretPos);
//Get paragraph's offsets
intStartPos = eleParagraph.getStartOffset( );
intEndPos = eleParagraph.getEndOffset( );
hi
i want to get the current location text in JTextPane
...iam useing
caretPos = jtpMain.getCaretPosition();
iam geting the current Locations at the same time i
want to read the entery current line
i used like this
StartPos=jtpMain.getText();
but iam geting entry data in JTextPane ... how can
get current Locatin data ...
pls help me

How to get data of tabulated text file into internal table

hi all,
i want to get data from tabulated text file(notepad) into internal table. i searched in SCN and got lot of post regarding how to convert excel file into internal table but i didnt get posts regarding text file.
thanks
SAchin

try:
DATA: BEGIN OF tabulator,
x(1) TYPE x VALUE '09',
END OF tabulator.
READ DATASET file INTO wa.
split wa at tabulator into table itab.
A.

How to get the Ship-To text for an Order from R/3 to CRM?

Hi experts,
how to get the Ship-to-Party text for an Order from R/3 to CRM?
Here I used a Function Module CRM_ORDER_READ and its working in the Development server.
After when this passed to the Stage Server for the Order i am maintaining the same Ship-to-Party for the order in the Stage server and I am no getting the text for that{Text maintained for the Ship-to-Party in the stage server}.
Thanks in advance.

Hello Nilaksha.
You can use the following query. Modify the segment to be queried if you wish.
SELECT cc.segment1||'.'||segment2||'.'||segment3||'.'||segment4 "Account",
nvl(sum(l.accounted_dr - l.accounted_cr),0) "Balance"
FROM gl_code_combinations cc,
gl_je_lines l
WHERE cc.code_combination_id = l.code_combination_id
AND l.set_of_books_id = <your set_of_books_id'
AND cc.segment2 = 'your segment value'
AND l.effective_date <= '30-nov-09'
GROUP BY cc.segment1||'.'||segment2||'.'||segment3||'.'||segment4
Hope this helps.
Octavio

How to get motion to read text from file?

There has to be a way to do this. I have a large file of text (transcripts from a clip several minutes long) and I want to make subtitles using Motion.
How can I get Motion to read the file and create a text object with the sentence/line in the file, then move to the next one and do the same thing for the next line? Thus it would make a timeline with several objects of individual sentences of text. Anyone have some ideas how to do this?
Thanks.

I was just playing around, and I think I figured out how to get what you want. First, change the layout method for the generator to "Paragraph", you can find this in the layout section of the generator. In your document, use carraige returns (return key) to define each section of text. To control the speed that each line appears, change the speed setting to custom, and then adjust the end keyframe.

How to get the content of text file to write in JTextArea?

Hello,
I have text area and File chooser..
i wanna the content of choosed file to be written into text area..
I have this code:
import java.awt.Container;
import java.awt.FlowLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.File;
import javax.swing.JButton;
import javax.swing.JFileChooser;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.*;
public class Test_Stemmer extends JFrame {
public Test_Stemmer() {
super("Arabic Stemmer..");
setSize(350, 470);
setDefaultCloseOperation(EXIT_ON_CLOSE);
setResizable(false);
Container c = getContentPane();
c.setLayout(new FlowLayout());
JButton openButton = new JButton("Open");
JButton saveButton = new JButton("Save");
JButton dirButton = new JButton("Pick Dir");
JTextArea ta=new JTextArea("File will be written here", 10, 25);
JTextArea ta2=new JTextArea("Stemmed File will be written here", 10, 25);
final JLabel statusbar =
 new JLabel("Output of your selection will go here");
// Create a file chooser that opens up as an Open dialog
openButton.addActionListener(new ActionListener() {
 public void actionPerformed(ActionEvent ae) {
 JFileChooser chooser = new JFileChooser();
 chooser.setMultiSelectionEnabled(true);
 int option = chooser.showOpenDialog(Test_Stemmer.this);
 if (option == JFileChooser.APPROVE_OPTION) {
 File[] sf = chooser.getSelectedFiles();
 String filelist = "nothing";
 if (sf.length > 0) filelist = sf[0].getName();
 for (int i = 1; i < sf.length; i++) {
 filelist += ", " + sf.getName();
statusbar.setText("You chose " + filelist);
else {
statusbar.setText("You canceled.");
// Create a file chooser that opens up as a Save dialog
saveButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
JFileChooser chooser = new JFileChooser();
int option = chooser.showSaveDialog(Test_Stemmer.this);
if (option == JFileChooser.APPROVE_OPTION) {
statusbar.setText("You saved " + ((chooser.getSelectedFile()!=null)?
chooser.getSelectedFile().getName():"nothing"));
else {
statusbar.setText("You canceled.");
// Create a file chooser that allows you to pick a directory
// rather than a file
dirButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
JFileChooser chooser = new JFileChooser();
chooser.setFileSelectionMode(JFileChooser.DIRECTORIES_ONLY);
int option = chooser.showOpenDialog(Test_Stemmer.this);
if (option == JFileChooser.APPROVE_OPTION) {
statusbar.setText("You opened " + ((chooser.getSelectedFile()!=null)?
chooser.getSelectedFile().getName():"nothing"));
else {
statusbar.setText("You canceled.");
c.add(openButton);
c.add(saveButton);
c.add(dirButton);
c.add(statusbar);
c.add(ta);
c.add(ta2);
public static void main(String args[]) {
Test_Stemmer sfc = new Test_Stemmer();
sfc.setVisible(true);
}could you please help me, and tell me what to add or to modify,,
Thank you..

realahmed8 wrote:
thanks masijade,
i have filter the file chooser for only text files,
but i still don't know how to use FileReader to put text file content to the text area (ta) ..
please tell me how and where to use it..How? -- See the IO Tutorials on Sun for the FileReader (and I assume you know how to call setText and append in the JTextArea).
Where? -- In the actionPerformed method (better would be a separate thread that is triggered through the actionPerformed method, but that is probably beyond you at the moment), of course.
Give it a try.

InDesign CS3 Scripting XML Import Multiple Images into same Text Frame

I am having trouble importing multiple images into the same Text Frame using XML import. I imported 5 images into the text frame. However, all 5 images are laying on top of one another. Does anyone know if there is a way to have all images laying out like how Microsoft Word handles inline images, i.e., laying out next image to the right of previsous image in the same line and if there is not enough space left in the line, then wrap to next line. Thanks in advance. I understand I could use JavaScript to do post import processing, e.g, calculate the image size and place each images accordingly. But I am trying to see whether there is a way to do this without scripts.

You can apply an object style to all anchored images by script. A text frame containing main flow should be selected.
var doc = app.activeDocument;
var textFrame = app.selection[0];
var rectangles = textFrame.texts[0].rectangles;
if (rectangles.length > 0) {
for (var i=0; i < rectangles.length; i++) {
rectangles[i].appliedObjectStyle = doc.objectStyles.item("Cover");
However, there is a better approach:
Step 1
Create place holders for a single "Book" element and format it as needed -- apply an object style to the cover.
Step 2
Import the xml file -- the placeholders are replaced with data from the 1st xml element
Step 3
Drag & drop the element containing all "Books" elements into the main flow -- all elements are placed and formatted the same way as in step 1.
Finally, add a new page, click the overset text icon and autoflow text to add pages so that to fit all the text.
Hope this helps.
Kasyan

CS3 VB how to get reference to a text frame?

Similar Messages

Maybe you are looking for