[CS4] How to create list entries having button using ADM ?

Hi All,
I  want to create list box using ADM whose entries can have button. like we see in layer panel, there is a button to select arts of layer as figure shows.
I tried to use function like  sADMItem->AddItem(listBoxRef,linkButton)  but there is no effect.
plz suggest how to do so.
Thanks

You can do this, but its a lot of work.
First, you can't add buttons to list entries. Second, that's not an ADM list in the Layers panel, thats an ADM Hierarchy Control. If you have no children of top-level items, then it will look like a list.
To do this, you'll need to use an ADM Hierarchy Control and you'll have to implement the Draw() routine of the entries of said control. It'll be up to you to draw everything -- the icon, the text, etc. Then you can also draw your 'button'.
Next, you'll need to implemented the Track() routine. You can have it do the default for most things, but you'll need to check for clicks and see if they're in the bounds of the 'button' you drew. If so, you can do whatever you want that button to do (and change some state that makes the button draw differently). I don't reccommend animating the press of the button, though that's probably doable (its likely very hard though).
The code for this is quite extensive, but I'd look at IADMHierarchyList.hpp & BaseADMHierarchyList.hpp/cpp in the SDK directory. You'll be sub-classing those guys to do all this. I don't know if there's any sample code demonstrating this or not.

Similar Messages

  • How to create list entries using ADM ?

    Hi All,
    I  want to create list box using ADM.
    Thanks

    Thanks for the reply.
    Sorry for the simple question.
    What is the theme used in Adobe Illustrator CS6?
    And then I started programming in Flash Builder 4.6 and the panel is obtained with the other buttons.
    Or how to move the theme Adobe Illustrator CS6 in my project?
    Thanks

  • How to create list of a View's column names and source

    Using SQL 2005, 2008, and 2012
    How to create list of a View's column names and source. For the following example would like to @Print something like the following.  Does anyone already have some code to do this? I realize there are probably some gotchas, but the views that I am looking
    at to use this follows the code snippet pattern below.
    DBACCT.[Account Number]
    dbo.ConvertDate(DBACDT). [Boarding Date]
    DBXES.DBXES
    CREATE VIEW [dbo].[v_ods_DBAL]
    AS
    SELECT DBACCT AS [Account Number], dbo.ConvertDate(DBACDT) AS [Boarding Date], DBXES
    FROM dbo.ods_DBAL

    The column information can be obtained from INFORMATION_SCHEMA.COLUMNS view using logic like below
    SELECT c.COLUMN_NAME,c.DATA_TYPE
    FROM INFORMATION_SCHEMA.COLUMNS c
    WHERE EXISTS (SELECT 1
    FROM INFORMATION_SCHEMA.TABLES
    WHERE TABLE_NAME = c.TABLE_NAME
    AND TABLE_TYPE='VIEW')
    http://technet.microsoft.com/en-us/library/ms188348.aspx
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How to create an entry in Badi Filter table T77HAP_FLT_PRP

    How to create an entry in Badi Filter table T77HAP_FLT_PRP

    Hello Rahul,
    Filter types should be created on badi implementations ( in transaction se19 )
    Read my answer on this thread :
    Re: BADI:Filter type un editable
    I hope it helps.
    Bulent

  • How to create an entry TVARVC

    hi how to create an entry...in TVARVC  for a variable...

    is it possible just go to  TVARVC
    utilities----> table contents-> creat entries.
    just check with this .
    Thanks

  • How to create a new push button in application tool bar in GMGRANT thru BDT

    Dear SAP Gurus -
    We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
    Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
    We went through a lot of documents on BDT but do not have a proper solution.
    Could you please help.
    Thanks in advance.
    Regards,
    Atul Mohanty

    hi,
    You can find user-exits (menu exits) to add new menu item.
    But, there is no possibility to add new buttons on application tool bar.
    Regards,
    Sailaja.

  • How to create dropdown box, radio button,check box in wad

    Hi,
    How to create dropdown box, radio button,check box in wad.
    Thanks,
    cheta.

    Cheta,
    This are all standard Web Items in the WAD. Drag them onto your template and then make the changes you need to them in their Properties.
    Regards
    Gill

  • Can someone tell me how to create accounting entries with the account status as error

    Hi,
    Can someone tell me how to create accounting entries with the
    account status as error?
    Thanks!!
    Danny

    It's call fixed/static background, and it is NOT directly support by iweb, you will need post processing either in html or javascript.
    Varkgirl (you need to search the previous forum) and I did it since iweb1:
    try Safari, and scroll: http://www.geocities.com/[email protected]/Links.html
    invisible link? roddy, fishing for info again?

  • How to create TNS entry for db2 database?

    hi,
    I want to create a db2 database tns entry in tnsname.ora file. How do i create?
    thanks

    There seem to be several related threads about this concern.
    Creating dblink for db2 database
    How to create TNS entry for db2 database?
    How to create TNS entry for db2 database?

  • How i create popup menu when button onclick

    how i create popup menu when button onclick

    You try adding a scrip tag in your jsp code, and calling the function in the onclick attribute.
    Example:
    <script><![CDATA[
                    function confirmDelete(){
                    if(confirm("Are you sure you want to delete selected user")){
                    return true;
                    } else{
    return false;
    ]]></script>
    <ui:button action="#{View.delete_action}" binding="#{View.delete}" id="delete" onclick="confirmDelete"/>
    Cheers
    Daniel
    null

  • How to create an RDBMS event generator using wlst on weblogic 10.3

    how to create an RDBMS event generator using wlst on weblogic 10.3, i got a code fragment needing class "com.bea.wli.management.configuration.RDBMSEventGenChannelConfiguration"
    but i can' t find this class in classpath on weblogic 10.3, pls help me, thanks. code sample is better.

    Hi,
    RDBMS Event Generator Channel Rule Definition
    When you are creating channel rule definitions in the WebLogic Integration Administration Console, it is recommended that you do not use the Back button if you want to resubmit the details on a page.
    You should always use the navigation links provided and create a new channel rule definition.
    http://download.oracle.com/docs/cd/E13214_01/wli/docs85/deploy/cluster.html
    http://download.oracle.com/docs/cd/E13214_01/wli/docs81/relnotes/relnotesLimit.html
    http://otndnld.oracle.co.jp/document/products/owli/docs10gr3/pdf/deploy.pdf
    This problem has been seen in the past when defining the channel rule for an RDBMS Event Generator if schema name was specified with the incorrect case (i.e. lowercase when it should have been uppercase or vice versa). To that end, it is suggested to change the case of the schema when creating the channel rule
    Regards,
    Kal

  • How to create  hierarchy on bi7 by using dtp

    how to create  hierarchy on bi7 by using dtp

    Hi Deba,
    Procedure to create Hierarchies:
    1.      In the Data Warehousing Workbench under Modeling, choose the InfoObject tree.
    2.      If you have assigned the hierarchy basic characteristic to an InfoObject catalog, select the corresponding InfoObject catalog for an InfoArea.
    If the hierarchy basic characteristic does not belong to an InfoObject catalog, choose the InfoArea Non-Assigned Nodes and the InfoObject Catalog Non-Assigned Characteristics.
    3.      Select the characteristic for which you want to create a hierarchy and choose Create Hierarchy from the context menu. The Create Hierarchy dialog box appears. The InfoObject name appears by default.
    4.      Enter a hierarchy name and description (short, medium, long). Other fields may be displayed, depending on which hierarchy properties were selected for the hierarchy basic characteristics
    Fields used to enter the Validity (valid to, valid from) for the hierarchy property Total Hierarchy Time-Dependent
    Fields used to specify the Hierarchy Version for the hierarchy property Hierarchies Version-Dependent.
    5.      Confirm your entries. The Maintain Hierarchy screen appears. You can define the structure of a hierarchy here.
    6.      To create a hierarchy node, you first need to choose an insertion mode:  Insert as First Child or   Insert As Next Neighbor (see Hierarchy Editing Functions).
    7.      Choose the type of node you want to create: Text Node, Characteristic Node, <Hierarchy Basic Characteristic Node> or Interval (see Hierarchy Nodes)
    8.      Repeat this procedure until the hierarchy structure has been set. For more information, see Modeling Nodes and Leaves.
    A hierarchy can contain 50,000-100,000 leaves at most. If your hierarchy is larger, you should insert a level that is used as a navigation attribute or preferably as a separate characteristic in the dimension table.
    9.      You can use Level Maintenance and Hierarchy Attributes to set how the hierarchy is to be displayed and processed in reporting (see Level Maintenance and Hierarchy Attributes).
    10.      Save the hierarchy.
    11.      Activate the hierarchy. See Editing Hierarchies.
    For more info
    [http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a6736e07211d2acb80000e829fbfe/content.htm]
    [http://help.sap.com/saphelp_nw70/helpdata/EN/e6/951d102a6c11d5b2e40050da4c74dc/content.htm]
    Regards,
    Rajkandula

  • How to create Profit and loss account using report painter

    Dear All,
    Can some one guide me as to how to create Profit and loss account using report painter.
    If some one can share the document having steps to be done,would be of great help.
    Thanks in advance.
    Regards,
    Gokul

    Hi,
    Could you please re-phrase your question? As the report painter is a reporting tool I assume you want to report on P&L accounts and not u201Ccreateu201D them. A few more details on what you intend to report would be useful.
    Regards
    Karl

  • How to create and read text file using LabVIEW 7.1 PDA module?

    How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
    I attach my code here.
    Attachments:
    File_IO.vi ‏82 KB

    Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

  • How to create a stored procedure and use it in Crystal reports

    Hi All,
    Can anyone explain me how to create a stored procedure and use that stored procedure in Crystal reports. As I have few doubts in this process, It would be great if you can explain me with a small stored proc example.
    Thanks in advance.

    If you are using MSSQL SERVER then try creating a stored procedure like this
    create proc Name
    select * from Table
    by executing this in sql query analyzer will create a stored procedure that returns all the data from Table
    here is the syntax to create SP
    Syntax
    CREATE PROC [ EDURE ] procedure_name [ ; number ]
        [ { @parameter data_type }
            [ VARYING ] [ = default ] [ OUTPUT ]
        ] [ ,...n ]
    [ WITH
        { RECOMPILE | ENCRYPTION | RECOMPILE , ENCRYPTION } ]
    [ FOR REPLICATION ]
    AS sql_statement [ ...n ]
    Now Create new report and create new connection to your database and select stored procedure and add it to the report that shows all the columns and you can place the required fields in the report and refresh the report.
    Regards,
    Raghavendra
    Edited by: Raghavendra Gadhamsetty on Jun 11, 2009 1:45 AM

Maybe you are looking for