CS6 windows extractor keeps giving me errors when trying to create a destination folder.

It gives me three error pop ups. The first says I should check my diskspace and check the destination folders write privileges. I know it is not my diskspace because I have 847 GB free. I tried running it as an administrator and saving it to program files x86, program files, my documents, desktop, C-drive, but none of them are working.
The next error that pops up is telling me to try redownloading it. I have done this and it has not worked.
The last error messege changes based on the destination i am trying to put it in.
I am running windows 8.1 on a brand new HP Envy notebook, it has a x64 bit OS with a Intel I7-4700 MQ processor. I didn't have any problems running it on my old gateway laptop, it was about 7 years old and could run it just fine but it recently died on me. It had a better OS though, Windows 7, and I am wondering if having windows 8.1 is causing a problem with this install.
Anybody have any suggestions?

The trial installer is identical to the installation files which are located at the link discussed in message #3.
Blob5 you may want to try running a trace route for the server which is hosting the CS6 files.  The server in question is going to be trials2.adobe.com.  This should help you determine if there is any packet loss or servers between you and the download server which may be causing your current difficulties.  You can then contact your ISP so they can report the issue.

Similar Messages

  • FireFox keep saying "unexpected error" when trying to print web pages.

    FireFox keep saying "unexpected error" when trying to print web pages. The print preview works OK, but when you try to print that "unexpected error" jumps up.
    Please email me on what to do to get FireFox to work.
    I don't see anything in the FAQ that might help me.

    Hi,
    Please also try this setting: Windows start menu or Control Panel > '''Devices and Printers''', right-click the printer > '''Printer properties''' > '''Advanced''', and select '''Start printing after the last page is spooled'''. In this case you can also close Firefox after spooling is over (usually much faster than direct printing), and printing will continue.
    Also as a general case, if you have security software (antivirus, firewall etc.) installed, you can try deleting all existing instances of Firefox and its related processes/files in all the different configuration modules/areas of the security software like process monitoring, sub/spawned process control, virtualization, HIPS etc., in addition to the security software's main configuration panel. Instead create new fully allowed/trusted rules for Firefox + its related processes in all the different modules/panels - a genuine/original Firefox installer as well as all the installed EXEs (Application) and DLLs (Application extension) are digitally signed by Mozilla Corporation (right-click > Properties > Digital Signatures). Even otherwise, some security software may also ask again when Firefox and/or its sub processes are started, and you may be able to allow/trust at that time. Please see [https://support.mozilla.org/en-US/kb/Firewalls this].
    [http://kb.mozillazine.org/Firewalls AV/Firewalls Configuration]

  • I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work)

    I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match

    YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
    Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
    TMI?
    GB

  • HT204406 hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    hi!!!! I keep getting an "error" when trying to activate my iTunes match. I get to the 1st step, then it gets stopped, and I get the error message. HELP!!!!!!

    That's definitely enough to start.
    It sure seems like it should work...and then I saw that you're using a router. It could very well be that the router is the weak link here.
    Instead connecting to your network router, try using a direct USB connection from your MBP. If that doesn't work, you read this post, which may be relevant to your problem:
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/Scanning-from-Mac-10-7-fa ils-after-all-recommendations-Not-ready/td-p/1287003
    It seems you're up to date with software. Post with your results.

  • HT4623 I keep getting an error when trying to update my iPad 2

    I keep getting an error when trying to update my iPad 2

    http://support.apple.com/kb/HT4623
    Can you please describe this error? What, exactly, is happening? What, exactly, does the error message – if any – say?

  • TS3274 I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine.

    I keep getting an error when trying to download a tv series right on my iPad from the iTunes store. I am able to download on my laptop then synchronize but it's a hassle specially if my laptop is not with me. All other Apps seem to be working fine. Help!

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • I keep getting unknown error when trying to download apps

    Does anyone know why I keep getting unknown error when trying to download apps?

    does it says anything else than unknow error?
    try going to settings>store, click on apple id and then sign out. Restart iphone and sign back in and try downloading again

  • I keep getting an error when trying to receive the new update iOS7 on iPhone5.  Any suggestions?

    I keep getting an error when trying to receive the new update iOS7 on iPhone5.  Any suggestions?

    Do the update using iTunes on your computer.
    Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • Ive got data on my phone and its keep saying network error when trying to connect

    Im trying to connect to internet when im out and about ive got data on my phone but it keeps saying network error when trying to connect

    Hi there,
    You may want to take a look at some of the troubleshooting steps found in the article below.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    -Griff W.

  • There was an error installing this update. Please quit and try again later. Error Code: U44M1I210  I keep getting this error when trying to update

    There was an error installing this update. Please quit and try again later. Error Code: U44M1I210  I keep getting this error when trying to update

    Hi,
    You can visit Error U44M1I210 | Install updates and see if it works.
    Regards
    Kishan

  • I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

    I have upgraded all apps from CS5 to CC - but keep getting U43M1D207 error when trying to upgrade Illustrator. Tried twice. Help!

    You can also use Download New Adobe CC Trials: Direct Links (no Assistant/Manager) | ProDesignTools
    Direct Download Links for Adobe Software
    Are you on a managed network. If yes please refer the Knowledge base article: http://helpx.adobe.com/creative-cloud/help/cc-desktop-download-error.html.
    You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html.
    Kindly follow the very important instructions before download.
    It might help you.
    Regards
    Rajshree

  • Error when trying to create XUSER information for SAPServiceSID

    Hi all,
    I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install..  Does anyone know a FIX for this?
    >xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
    FATAL: Close xuser entry failed: could not write USER data [1307]
    I am running the command as the SIDADM user. 
    I have tried the solutions in the following notes without success:
    39642
    1542818
    39439
    1875264
    1409913
    Thanks!

    Hi Jayson,
    Try this.
    Solution
    Add the "Administrators" group under:
    Control Panel
    -> All Control Panel Items
       -> Administrative Tools
          -> Local Security Policy
             -> Local Policies
                -> User Rights Assignment
                  -> Take ownership of files or other objects
    You check you command and modify.
    xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
    Regards,
    V Srinivasan

  • Solution to stop error when trying to create a portfolio

    Hi all,
    I finally found a way to make a portfolio in acrobat pro 9. The problems I was having were explained in the thread titled "Acrobat pro 9 has a stop error when trying to create a portfoloi"
    It seems ther is another way to do this, by selecting 'combine' and then 'merge files into a single pdf' rather than 'assemble pdf portfolio'.
    The merge option also gives the choice of making a pdf package and does not result in a stop error with authplay.dll.
    So much for Adobe support who conuld not tell me this or respond to support requests.
    All I have to do now is to remember to not click on 'assemble pdf portfolio' when I want to assemble a pdf portfolio but "merge files into a single pdf" when I want to assemble a pdf portfolio.
    I would still like to hear from Adobe why acrobat pro 9 has a stop error with authplay.dll.
    I feel a lot happier now.

    I read through the pdf wth your emails to/from customer support. I'll have to defer to someone else because it seems you have tried what I would suggest.
    If someone else does not respond with a better plan and you are willing to spend a bit more time before writing off Acrobat 9, I would try the process below one last time. (If you are using a CS suite, while authplay.dll is found in each of the directories, it does not appear that the issue extends to the other programs.)
    1. Using Add/Remove Programs, uninstall all Adobe Acrobat and Reader software and uninstall the Adobe Flash Player Active X and Adobe Flash Player Plugin. If you have it, uninstall Adobe Air.
    2. In C:\Documents and Settings\(your profile name)\Application Data\Adobe, delete the Acrobat and Adobe PDF folders if they still exist.
    3. Reinstall only Acrobat 9.
    4. From Acrobat, run the updater Help > Check for Updates and install all updates.
    5. Verify Adobe Acrobat is now version 9.2: Help > About Adobe Acrobat Pro  (If for any reason it is not 9.2, use the update on http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
    6. Test
    Message was edited by: Anna Nmty
    While searching for a solution, I just saw your post over at acrobatusers.com (http://www.acrobatusers.com/forums/aucbb/viewtopic.php?id=15765). Looks like my advice was largely a duplicate, although your event log indicates Acrobat did not update properly.

  • 500 internal server error when trying to create users

    I am getting a 500 internal server error when trying to create users. What is the cause? We tried reinstalling the latest java jdk release and that didn't help.

    Check whether your DBControl or ASControl service is still running or crashed. EM is not able to connect to the Management Server.
    For instance in Windows, you may see that the Servise is not started. Then check for error logs in $ORACLE_HOME/sysman/logs for any related error messages in the log files

Maybe you are looking for

  • How do I focus an image in pdf format?

    I have designed a business card with logo, name, details etc. I've then exported it into a .pdf file for printing, but the image is slightly pixelated and gets worse as I zoom in. I have had some artwork previously made by a design company and don't

  • Connecting two ipods to the same PC

    Hello everyone, this is my first visit to the forum. I apologise if this question has already been answered, but I have had a look around and can't see it having been covered anywhere else. We are about to introduce a second ipod into our home but on

  • Is this true? AT&T is interfering with Nexus unlocked phones updates?

    I don't currently own the Nexus 6, but this is unacceptable if true, is AT&T really blocking updates for unlocked Nexus 6 phones? Source:http://www.androidpolice.com/2015/01/21/psa-if-your-nexus-6-has-an-att-sim-card-your-android-updates-are-being-wi

  • SetForegroundWindow(IntPtr hWnd) not working when application in notification area.

    Hi All, I create a singleton WPF application, when the application is minimize in the notification area. I double click the application's shortcut to call the application. The application cannot show the Main Window in Screen. Here is the code: App.c

  • It says I dont have dnssd.dll installed.  what does that mean

    I'm trying to get started on installing Airport.  Right away the Airport utility says I don't have dnssd.dll installed.  what does that mean?