CSS issue when changing the table row height to 16px

Hello,
After changing the table row height through css like this:
.table-row-cell, .table-cell {
-fx-cell-size: 16;
the table rows are correctly displayed with a 16px height but the cell bottoms seem to be incorrectly set.
For example the following css style (a red 3px bottom border):
.table-cell {
-fx-border-width: 0 0 3 0;
-fx-border-color: red;
doesn't work anymore with the new row height whereas it works with the 24px standard row height.
While investigating with Scenic View, I noticed that changing the row height changes the TableRow layoutBounds height (from 24px to 16px so that's ok) but not the boundsInParent height which remains to 27px. I think it should become 19px (16 + 1.5 + 1.5). I don't know if it's a bug.
Anyway, any help making the css red border working for a 16px row height would be greatly appreciated.
Regards,
Bruno.

Q: Would this help to just use absolute div tags and give me 'ABSOLUTELY ABSOLUTE' positioning?
No. APDivs are not a good primary layout method. Use default CSS positioning (which is no positioning at all). Align page elements with margins, floats and padding.
See example -- 2-Column CSS Layout with Grids
(View Page Source in your browser to see the code)
http://alt-web.com/TEMPLATES/2-col-fixed-with-grid.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Similar Messages

Report Generation Toolkit Table Row Height-MS Word

I am having trouble setting the table row height in the report generation toolkit. I can set the column width fine, but the row height seems to remain the same no matter what I set it to. I have attached the VI that generates and formats the table, and the printout it is resulting in. I have also attached the template file I am using.
Any tips to get this to work right? I am trying to make the cells exactly the same height as the text inside.
Solved!
Go to Solution.
Attachments:
AddMarkersToReport.vi ‏20 KB
badFormatting.pdf ‏179 KB
splitter.docx ‏13 KB

Hi,
So I tried .2 and it didn't work. So I went to Word to manually change it, and it did not work either. There is a selection box in word, for the table properties, that seems to default to the value "at least". When I changed this manually to "exactly" in word, no problem with the .2 manually in Word.
Hopefully this can be set within the template, for all new inserted tables. I'm not sure the report generator VI's expose this property. Well, this is a start for the issue.
Edit ****
You can go into the add table VI and expose the property. See pic. However, you have to decide if you want to "upgrade" this VI permanently to expose this property or make a copy with the property exposed. I haven't messed with the new class reports too much, so not sure of the ins and outs with this.
I think this is the issue with the row size becoming smaller.
Mark Ramsdale

Adjusting Table Row Height with CSS

I am trying something out for a project I am working on. I have created a table that looks great in design view, but when I see it live or in a browser, items are spaced too far apart. It seems the height for the table is not what design view shows it to be. How do I change the tables attributes to adjust the height so items will be closer together and not so much whitespace? Here is what I have done:
MONDAY      Enjoy our 2 for 1 dinner special on the whole menu (up to $8.95 discount)
TUESDAY      House Margaritas or any kind of beer for only $2.95!
WEDNESDAY      Enjoy 2 dinners for $20.00 from our special menu
        (This special cannot be combined with any other offer)
THURSDAY      Ladie's night! Martinis for only $5.00
FRIDAY      Happy Hour at the bar only 4-7 PM
LIVE MARIACHI BAND FRIDAY-SUNDAY!
I'm sure I'm missing something silly but any help will be appreciated. Here is the actual link in my browser:
http://ymimusic.com/delete.html
Thanks much!

By default some html tags come supplied with margin and padding, which although very generous, is not always what is required.
Zero out the the margin and padding on the <h4> and <p> tag in the 'specials' table by adding the below css selectors to your css:
#specials h4 {
    margin: 0 0 0 0; /*top/right/bottom/left*/
    padding: 0 0 0 0;
#specials p {
    margin: 0 0 0 0;
    padding: 0 0 0 0;
Then add back in what space you require - so if you want a 10px space between the heading and the text:
#specials h4 {
    margin: 0 0 0 0; /*top/right/bottom/left*/
    padding: 0 0 10px 0;

Changing the table name while drill down at the dashboard query

I have a DAY fact table that has about 1B rows.
The purpose of this table is to store on hand quantity for each item per day.
On the presentation layer I have a dashboard that will display average on hand qty per year and then user can drill down to quarter/month/week and then by day level to see the actual value at evey level.
Its hard to run aggregation on fly as all my 3 TEMP tablespace 32gb each filled and then I get error can not extent TEMP file.
So I thought I will do the aggregation at the database level and store the aggregated data in another table. So at first dashborad will read this new aggregated table to display qty at yearly. As soon as user drill down to quarter the dashbord should query the actual DAY fact table by filtering for specific year and quarter.
IS it possible? Can I change the table name while I drill down to lower level?
Thanks in advance.

Hi use,
Yes. This is possible in OBIEE. You need to use Action Links to have navigation between reports. The main idea is to have 2 analysis. One with your aggregated data by year (using your aggregated table), and another one with the rest of the hierarchy and data (using normal fact table)
You add an action link on this report, that can navigate to the second report. showing "the details" (in your case would be the rest of the time dimension).
Please refer to http://www.rittmanmead.com/2010/07/obiee-11gr1-action-framework-and-conditions/ for actions links.
Another way is to create 2 analysis, then go to the 2nd analysis, and filter the column year as "Is based on results of other analysis" and you select there the first analysis. In this case when you click on the year in the first analysis, this value will be passed to the second analysis so you can filter the rest of the hierarchy based on the year you clicked on the first analysis.
If helpful, assign points.
J.

I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked.

How to change the width and height of the visible part of the of the report

I have define a report with paper size 'Letter', orientation 'landscape' and 30 columns. Dynamically I am changing width of columns and suppressing many columns of the report.
Mostly using first 16-20 columns and others get suppressed.
Now problem is that when navigating the report thru crystal viewer, a huge blank spaces getting display on right of the report. When we take jump to some part of report thru navigation tree, the whole report gets shifted to left and only blank part is visible and it is required to scroll left.
Even printing is not working correctly.
Is there any way to change the width and height of the visible part of the report in the viewer thru .net classes? Setting the width and height of the report in Load event handler doesn't help.
Example: CrystalReportViewer1.Width = 200; - is not helping.
Is there any other solution?
Please let me know.
Thanks
Mahesh Patel

Hi Yogesh,
Your suggestion 'reportDocument.PrintOptions.PaperSize=PaperSize.PaperLedger;' along with 'PaperOrientation' setting as follow works fine. I tried to switch between Landscape and Portrait depending on report width.
reportDocument.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
But problem with crystal viewer remain as it is.
While navigating report thru crystal viewer, when we take jump to some part of report thru navigation tree, the whole report gets shifted to left and it is required to scroll left.
Thanks for your very good suggestion.
Mahesh Patel

Read the table row data and dispaly it in the ME21n transaction

Hi All,
i'm new to ABAP and OO ABAP .Please somebody help me out for my req. My req is , when i double click on the table row which is having PO details , then that data should be displayed in the ME21n transaction. please some on tell me how to achive this using SALV class..
thanks,
Rajeev.

Hi rajeev bikkani ,
you can use the events 'Double_click' in alv. below given the code, try out.
class lcl_list_event_handler definition.
PUBLIC SECTION.
methods on_double_click
      for event double_click of cl_gui_alv_grid
        importing e_row .
endclass.
class lcl_list_event_handler implementation.
method on_double_click.
call transaction 'ME21N'.
ENDMETHOD.
ENDCLASS.
before executing the method SALV.
write code
set handler obj2(reference for lcl_list_event_handler) ->on_double_click
                for obj1(referenece for cl_gui_alv_grid).

Can any one tell me how to change the current row header in FB1LN tcode

Hi,
can any one tell me how to change the current row header in FB1LN tcode.
I want to show input date also in the layout.
Regards
Mave

Hi
I know two ways:
- transaction obvu: here you can insert new fields, but only if these fields are included in certain table (like BKPF, BSEG, BSIS.....
- if your field isn't included in those table, you have to modify the structure RFPOS and manage it in the BTE 1650. After updating RFPOS you have to run the program RFPOSXEXTEND to update the structure RFPOSXEXT.
Max

Resize table row height dynamically

Hi All,
I have a requirement to display four item texts in one of the table column. I had created a subform with four texts in that column. I am getting the data as required, but by default the table row size has increased because of four texts in the column. At times, i have only data in two texts, still getting the default size of the row(0.41in height), how can i adust the height based on the data. How can i adust the row of the table dynamically.
Thanks,
Kumar

Hi Kumar,
I did similar to this, where as my table is entirly designed in subforms, so there is no auto setting of the columns of a row.
I had the below code, which finds the maximum height of a coulmn element and sets its height to all of the coulms of a row instance.
I call this function on layout ready event of the row, as below
ItemGenerator.setHeight(this);
function setHeight(rowData){
     if(rowData.presence == "visible"){
//             xfa.host.messageBox("height set start in layout ready");
           var yearH = parseFloat(xfa.layout.h(rowData.FinYear,"in")).toFixed(3);
//           xfa.host.messageBox("1");
           var ipaH = parseFloat(xfa.layout.h(rowData.IPAType,"in")).toFixed(3);
//           xfa.host.messageBox("2");
           var expenseH = parseFloat(xfa.layout.h(rowData.ExpenseType,"in")).toFixed(3);
//           xfa.host.messageBox("3");
           var descH = parseFloat(xfa.layout.h(rowData.Description,"in")).toFixed(3);
//           xfa.host.messageBox("4");
           var payH = parseFloat(xfa.layout.h(rowData.PayType,"in")).toFixed(3);
//           xfa.host.messageBox("5");
           var payconH = parseFloat(xfa.layout.h(rowData.PayConditions,"in")).toFixed(3);
//           xfa.host.messageBox("6");
           var acqconH = parseFloat(xfa.layout.h(rowData.AcqittalCond,"in")).toFixed(3);
//           xfa.host.messageBox("7");
           var maxHeight = Math.max(yearH,ipaH,expenseH,descH,payH,payconH,acqconH)+"in";
           var marginBottom = parseFloat(Math.max(yearH,ipaH,expenseH,descH,payH,payconH,acqconH)- 0.2).toFixed(3)+"in";
//           xfa.host.messageBox("max height = "+maxHeight);
//           xfa.host.messageBox("bot margin = "+marginBottom );
           rowData.h = maxHeight;
           rowData.IPA.h = maxHeight;
           rowData.IPA.margin.bottomInset = marginBottom ;
//           xfa.host.messageBox("8");
           rowData.FinYear.h = maxHeight;
//           xfa.host.messageBox("9");
           rowData.IPAType.h = maxHeight;
//           xfa.host.messageBox("10");
           rowData.ExpenseType.h = maxHeight;
//           xfa.host.messageBox("11");
           rowData.Description.h = maxHeight;
           rowData.ReqAmt.h = maxHeight;
//           xfa.host.messageBox("11");
           rowData.RecAmt.h = maxHeight;
//           xfa.host.messageBox("12");
           rowData.PayType.h = maxHeight;
//           xfa.host.messageBox("13");
           rowData.PayConditions.h = maxHeight;
//           xfa.host.messageBox("14");
           rowData.AcqittalCond.h = maxHeight;
//           xfa.host.messageBox("15");
           rowData.Remove.h = maxHeight;
           rowData.Remove.margin.bottomInset = marginBottom ;
//           xfa.host.messageBox("finally");
Hope something of this sort might helpful to you.
Cheers,
Sai

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

IMac freezes when changing the screen saver

Hi all:
I originally posted this in the "Using Mac OS X" forum (iMac freezes when changing the screen saver, but thought I'd post here as well since the issue arises on a freshly installed OS.
We've got three 350MHz slot-loading G3 iMacs (with 512MB RAM) which we're planning to use for basic word processing. The install of Panther (10.3.5 from black retail cds with 10-seat volume license) went fine on the first two. Ran the updates to 10.3.9, installed MS Office 2004, everything working great (they're a little slow, but after all, they are only 350 MHz).
On the third, the first problem we noticed was the computer would lock up whenever we changed the screen saver from the default (Flurry; Computer Name also works). It continues to do so even after: repair permissions; repair disk; Disk Warrior; reset pram; reset nvram; reset pmu; change RAM; change hard drive; erase hard drive; write zeros to hard drive; reinstall with different set of retail CDs; trash preferences, and delete cache files. (If there's anything I've left out, it's in the other thread).
Now we've noticed that we can't create any new user accounts. We've thought about putting this one in production, just warning the user that they can't change the screen saver, but god only knows what will turn up next.
I'm starting to think it's a logic board issue, but could it be that selective? And would you see the same problem with another hard drive and different install discs? Am I missing something?
BTW, there's a crash log with the other thread.
Andrew
Dual 2.0 GHz G5 Mac OS X (10.3.9)

I'm going to mark this one as answered.
I removed the hard drive from the iMac, and put it into another 350 MHz iMac, and everything works great. I can select any screen saver without having it freeze, create new accounts, whatever my little heart desires.
In checking the history of the problem iMac, there was an assortment of problems with booting (both from the hard drive and from the CD-ROM drive) which were never satisfactorily resolved. The problems just seemed to go away after sitting unplugged for a few days, as much as for anything we actually did to it.
Now we just have to decide whether it's worth fixing, or using it somewhere in a non-critical role with OS 9 installed.
Cheers,
Andrew

Portal error -- page not found or not available when changed the datasource

experts ...
I am facing issue while changing the UME to LDAP.....
With Java_ABAP_LDAP.xml the EP is running fine ..but when I am changing this config file to ...LDAP ..
i.e. dataSourceConfiguration_iplanet_deep_readonly_db.xml I am getting the error ....when I logged with administrator user
as page not found or not available.....
I checked oss notes 939412 and 1140519 but no help..............
Kindly suggest ASAP ..
Thanks !!

Hi Yogesh,
While changing the xml to ldap, you need to change ldap server details also in the ldap server tab under ume configuration. And, also do the connection test using test connection button in the configuration screen.
Regards,
Sen

Hide the Table Row Scroller

Hello ,
I am on EP7.0 NW04s and want to hide the Table Row Scroller ...the one which says "Row 1 of 4" for eg: ....is there any table property I can modify to achieve this..
Any help would be highly appreciated.

Hi Subahsh,
For Hiding RowScroller, footerVisible setting will not work.
If you want to hide the Row scroller then do following steps
(1).IWDTable t = (IWDTable)view.getElemnt("Table");
(2)t.setVisibleRows(2);
(3)then delete the rows which you do not want to show..
and before deleting copy it some where.
Or the other way to handle the problem is :-
TableNode----
> ActualNode create both in the context
Keep all contents in your actual Node.
And when you want to update the number of rows...
then invalidate TableNode( it will clear the table node).
And the again copy Elements from ActualNode.
And keep a count of the number of elements, set the visibility of row to that count..
In this way the scroller will never come...
See basic of this concept is that you have to keep the VisibleRow setting same as number of elements in your table.
feel free to ask queries
Regards,
Praveen
Message was edited by:
Praveen Kumar Pandey

How to change the table's for an existing report

Hello,
How can I change the table names for reports created with a different table name? for e.g If I created a report which included a table called "2009_10_example", How can I change that table to a different table "2010_10_example1".
I am using Crystal reports 2008, and the reports were created using Report Creating Wizard.
Thanks,
Abhishek

In the Database Menu, there is an option Set Datasource Location. This allows you to pick a table from the current tables used, and select a table to replace it with. Press the Update button, and Crystal will swap one for the other. If the field names and data types are all the same, it will automatically change all references throughout the report to the new table's fields.
May I suggest that your tables are set up improperly if you have to change report code to run it for different months? The data should all be in one table with dates, and parameters to select the date range to report on. (That was said in the spirit of helping...)
HTH,
Carl

CSS issue when changing the table row height to 16px

Similar Messages

Maybe you are looking for