CST amount is debit in the purchase price variance

Hi
We are maintaining std in the materials master
and price procedure as taxinj
While doing migo, the CST amount is debit in the purchase price variance and credit in the GR/IR RM,
We need to debit the CST amount in the in the Raw material account
what are the settings i need to carry out Plz give suitable suggestions.
in tax code we are not maintining any G/L account for the CST
Edited by: K. Raghuram on May 19, 2009 12:48 PM
Edited by: K. Raghuram on May 19, 2009 1:02 PM

Hi Raghuram,
I think,the only possiblity for this to happen is due to the standard Price in the Mterial Mater you are using.
Means in the Material Master ,the Price key is a standard pricing.
So ,when ever you do a GRN ,the PO value will go and hit the Material account upto to the Standard price maintained in the material Master.
if the amount is more than it ,then amount difference will hit the Price variance account.
so in your case ,the CST is inventorised one ,i believe.. so that is the reason it is behaving so.
if there is somethig else required.provide a clear insight of the Problem.
Regards
Anjanna

Similar Messages

  • CST and VAT  amount (non deductible) is debiting in the purchase price

    Hi
              1)     We are maintaining standard price as price index
              2)     Pricing procedure as TAXINJ
              3)     While GR the CST and VAT  amount (non deductible) is debiting in the purchase price      
                     variance, and credit in the GR/IR
              4)     Which has to debit in the raw material account
              5)     Is there is any notes for the this
              6)     or any other solution plz send your reply

    HI..
    it is not done in OBq3
    See in OBQ3..you define Pricing procedure.against pricing Procudure you will give the account Key against the condition type in the Pricing Procedure.
    For this Account Key ..you Define it as Detuctable or not in OBCN.
    so it determines whether to add to raw material account or not..
    but see in early post which is also valid even if you have define the sdame in OBCN.
    Hope so it helps
    Regards
    Anjanna

  • Purchase price variance

    Hi
    I want to to drill down the purchase price variance.Say I have PPV of 10K. I want to drill down to details of 10k.How to proceed.What is the transaction code for that?
    Thanks in advance.
    SN

    Hi Satya,
    Variances are based around the standard values that are set up in the Material Master file. These standard values represent what it "should" cost to produce (or purchase) a unit of the product. Variances are calculated automatically when settlement jobs are ran in SAP
    purchase price variances are caused by a difference between the standard cost in the MM file and the actual price on the purchase order.
    The entries will b something like this
    Debit Inventory XXXXX
    Credit Accounts Payable XXXXX
    Credit Price Variance XXXXX
    Regards
    Genie

  • Standard SAP report for purchase price variance

    Hi All,
    I need to know if there is a standard SAP report that shows the purchase price variance.
    Thanks,
    Regards

    Hi Ritika,
    There is no standard report available to compare purchase order price cost and standard cost of a material.
    You can check if FBL3N helps to resolve your purpose or not. Or else you have to make a customized report with the help of ABAP'er on the informations based on the following tables.
      MBEW
            EKKO
            EKPO
            EKBE
           MKPF       
            MSEG                  
            KEKO
            KEPH,                        
            BKPF                                            
            BSEG                                          
            LFA1         
    Thanks,
    Vasanthan

  • Purchase Price Variances

    Hi,
    I am new to SAP.  What is the best way to look at all the purchase price variances for a whole month?
    Thanks

    HI,
    Use transaction FBL3N and enter the Purchase Price variance GL Account with period for month and execute....
    Regards,
    Chintan Joshi

  • Purchase Price Variance Split

    hi
    how to implemente the Purchase Price Variance
    what we need for implement.

    Hi,
    Goto T.code OBYC  and PRD-Cost (price) differences and configure you purchase price accounts.
    Thanks,
    Rau

  • Purchasing price variance report

    dear all,
    I have to generate the purchasing price variance report...
    Report to analyze and compare the following data elements from the invoice and standard cost:Period Actual average price per unit.YTD actual average price per unit o current year.YTD actual average price per unit o previous year.Current (actual) standard cost per unit.
    The tables to be used Ekko/ Ekpo/Ekbe.
    Best regards

            Setting of Chartrange and Labelrange (1)
    .ChartRange  = .Range(start, end)
    .ChartRange  = .Range(.Cells(row#,column#), .Cells(.Rows.Count row#, column#))
    .ChartRange  = .Range(.Cells(1,1), .Cells(.Rows.Count-1, 5))
    0
    1
    2
    3
    4
    5
    0
    Label Range
    ** Header names not to be exported to chart **
    1
    4
    3
    -8
    2
    4
    3
    -7
    3
    5
    2
    -6
    4
    7
    21
    -5
    5
    18
    35
    -4
    6
    15
    25
    -3
    7
    20
    16
    -2
    8
    0
    0
    32
    2.5
    5
    -1
    .ChartRange  = .Range(.Cells(2,1), .Cells(.Rows.Count-1, 5))
    0
    1
    2
    3
    4
    5
    0
    Label Range
    ** Header names not to be exported to chart **
    1
    ** data not to be exported to chart **
    -8
    2
    4
    3
    -7
    3
    5
    2
    -6
    4
    7
    21
    -5
    5
    18
    35
    -4
    6
    15
    25
    -3
    7
    20
    16
    -2
    8
    0
    0
    32
    2.5
    5
    -1

  • Purchase Price Variance - Exchange

    Hi,
    When we do IR for a PO, there is an entry in the accounting document for the Purchase Price Variance -Exchange. How is this entry computed or during what cases is this entry added in the accounting doc ? The IR done is with reference to a PO in a foreign currency.
    Thanks.

    Hi
    Due to foregin exchange rate at the time of MIGO and MIRO their is entry in Purchase Price Variance -Exchange

  • CST and VAT amount (non deductible taxe) is debiting in the purchase price

    Hi
    I am facing some problem in migo FI documents
    MY client is maintaining standard price for raw materials
    While doing GR in MIGO CST and VAT ,both are non deductible taxes, is debiting in purchase price variance and crediting in GR/IR
    The above said taxes are not debiting in raw material account now
    I had already done all the settings in OBCN like tick mark, posting indicator and 3 Distribute to relevant expense/revenue items etc.,
    but still the taxes are debiting in variance account. We are maintaining pricing procedure as TAXINJ
    plz give your suggestions how to solve the problem.

    Hi
    If you have maintained a Standard proce control in the material master, the non deductible taxes will not post into the material account, you need to maintain a moving average price control for the material to get the non deductible taxes posted.
    Price variance account is trigerred due the reason as sytem is trying to post it on to the material and you maintained it as standard price, so sytem cannot add to the material, so it posts the amount in PP account.
    Change price control from S to V, you r issue will be solved
    Thanks & Regards
    Kishore

  • How to find out what is the purchase price keyed in Initial Quantity

    Dear Experts,
    The stock valuation is Standard Costing.
    Before this, someone else keyed in initial quantity and the purchase price in the Initial Quantities module.
    Now when I issued a PO to a vendor (price list tagged with Last Purchase Price), the price shown is different.
    How do I find out if the price keyed in initial quantity is correct or not? Any tables I can refer to?
    I tried to track from the Inventory Posting List and the smartlink only bring me to the journal entry for the initial quantity posting. I don't have the details like item no., qty, price.\
    Thanks in advance.

    Hi Joyce,
    Go to Inventory->Inventory transactions->Initial Quantities, Inventory Tracking, and Inventory Posting. Open Inventory Posting Tab and select your price list and items if you want or check you can see there Item quantity and old price also price list wise.
    Thanks
    Sachin

  • How do I stop Mac App Store apps listing as "Accept" rather than the purchase price?

    Hi there,
    I'm attempting to buy iPhoto '11 from the Mac App Store but it lists as "Accept" rather than the purchase price.
    When I click on Accept a message pops up saying "These apps cannot be accepted by your Apple ID: These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the applications."
    The pop-up gives the option to hit OK and there are no other buttons.
    iPhoto '11 is not in my purchases list. I have never bought it before. I am using a second hand Mac and I suspect the previous owner may have downloaded iPhoto but it is no longer installed anywhere on the system and I am the sole user of it. There are no other accounts on this Mac and it looks like it was reformatted back to scratch before I bought it.
    The problem is I cannot find any way to reset the "Accept" option so I can actually purchase the App.
    Does anyone know how to fix this issue?

    i also am having this EXACT same problem and alot of others seem to be too? i wonder what is going on here! if anyone from apple reads this, maybe it is something you can look into? My mac did not come with a start up disk and i accidently deleted the iphoto app... i have 2 apple I.Ds but i dont use the one originally registered. i am aware i will have to buy the app again in this case so please let me buy iPhoto please! and thanks!

  • Newstand in app purchase made in DPS is appearing in store with "error" below instead of the purchase price/download.

    Newstand in app purchase made in DPS is appearing in store with "error" below instead of the purchase price/download. Not sure why, as the product ID number matches up between itunesconnect and DPS. Any idea how to fix?

    same here. this thread suggest that it's carrier related issue
    http://supportforums.blackberry.com/t5/Payment-Service/Error-quot-The-Item-you-requested-is-invalid-...
    Twitter: @gyubok

  • Capture the purchase price during sales order creation

    Hi,
    User wanted to capture the item purchase price when a sales order is raised.
    Currently, the sales order capture the VPRS whcih is coming from the material valuation (MAP) price.
    Is there a standard condition type that will captured the purchase price in the PIR record or the PP condition?
    Thanks

    Hi
    As far as i know it is not possible to fetch the purchase price in sales order.
    May be you can define an another condition type asa statistical and maintain the condition records for that. But it will be a tedious job for maintaining all the things.
    regards
    Prashanth

  • PPV Purchase Price Variance - PeopleSoft

    What is the minimum that a purchase price variance will update an item?
    We have several items that are priced in the 10th and 100th of a penny for large volume items.

    Hi Satya,
    Variances are based around the standard values that are set up in the Material Master file. These standard values represent what it "should" cost to produce (or purchase) a unit of the product. Variances are calculated automatically when settlement jobs are ran in SAP
    purchase price variances are caused by a difference between the standard cost in the MM file and the actual price on the purchase order.
    The entries will b something like this
    Debit Inventory XXXXX
    Credit Accounts Payable XXXXX
    Credit Price Variance XXXXX
    Regards
    Genie

  • Report for Purchase Price Variance

    Hi,
    Is there any standard report for finding Purchase Price Variance between Purchase Order and Material master
    regards,
    Mallik

    Hi Mallik,
    There is no std report for Purchase price variance .
    But you can check KSB1 , where you can find the Price difference which is going to your PRD account .
    You can find out your PRD G/L account .
    Now go to KSB1 . In the cost element field give the PRD G/L account .
    After executing change the layout as per your requirement .
    Now you can see the Pur Price variance for the particulat material for the PO .
    Otherwise you need to develop a customised report .
    Hope this helps .
    regards

Maybe you are looking for

  • Excise Value Error during MIRO

    Dear Frinds, During Excise capture and post (J1iex), my user is manually filling up   excise  duty values  and not capturing the  excise value which the system is showing in the condition table(as per tax code rate). Now,in MIRO,  for all the excise

  • Error -17300 is generated when running selected step

    Error -17300 is generated when running selected step (with ot without process model). Using TestStand 2.0.1f1 See BMP file for error dialog. I was trying out the example in the Resource Library - TestStand | Process Models | Running Selected Steps vi

  • Read file and count rows and columns

    Can someone guide me on how can I accomplish the following a) read what supposedly is a matrix from text file b) make sure all the entries in input are integers c) if not raise error, else c) is the matrix a square matrix? d) if not raise error if it

  • Multiple  hot spot in a question slides

    Hai, Please let me know is it possible for multiple hotspot in Question Slide in captivate 3 ?. I want to give a spot in more than one location on an image in a question slide. Is it possible in Capitivate 3 With thanks Pol

  • How to remove the date format validation done by the UI

    Hi All, I am having a date field which is an input field for Dateof Birth. User can either select from the calendar or enter his own date. If the user enters invalid date format'(032342525') something like this, when we move to the next tab the colum