CTS Tranport
HI all
in dovelopment i created text data source in BW side(datamart). while trying to transport its saying Extract structure ZOXDN20052 is not active.and The extract structure ZOXDN20053 of the DataSource ZMEINS_DS_TEXT is invalid. it is active in development and not active in quality. Pls suggest me for next move. points will award for solution.
Thanks.
Sriram krishna,
This problem with collecting custom data sources, When you collect your data source for transport extract structure is not collected automatically, you need to collect the extract structure manually in same request.
For you problem,
Collect extract structure in new request import this request first and then re import the failed request.
RC
Similar Messages
-
Communication channel parameters are not tranported in CTS+ transport
Hi,
My scenario is MDM to jms.
we have configured the cts+ transport in our system.
We transported the ESR and ID objects from development to Quality.
But in the sender mdm communication channel the everything is getting transported except Repository password.
when i checked in the quality system the Repository password was blank.
And receiver jms communication channel details are in
dev system
IP Address or server Name:135.12.14.12
server port :3321
Queue manange name :RRTYRKB
channel name :KDIEKE.MDM
Quality System
IP Address or server Name:localhost
server port :1414
Queue manange name :QM_hostname
channel name :S_hostname
i want know whether this is the case when we do the cts+ transport?
if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
Thanks.
Regards,
Muniyappan.Hi,
>>>if it is the case should i edit the objects in the Quality sysem(which i don't want to do).
communication channel attrubites always get reset in the new env - TEST, PRD, etc.
and you always need to fill them once more - this is the normal way
otherwise - would you like to use DEV parameters on PRD system ?
maintaining the channel attributes is a typical task on all landscapes
Regards,
Michal Krawczyk -
How to configure CTS+ for Solution Manager for XI 3.0
Hi ,
We are working on XI 3.0 SP 20 and Doing a file system based transport of .TPZ files. We observed that there is a possibilit of misssing the objects while tranporting. So we are planning to set CTS+ with our Solution Manager.
Question:
1. Can we configure CTS+ through the latest version of Solution Manager for XI 3.0 landscape?
If Yes .. How? If No... Why?
2. Is there any way to make the the transport automated like ABAP tranports.
If there is.... Please send the link or documents..
Thanks
ManojHi Venkat,
Thank you for the Demo. The Demo gives me information about the CTS+ setup. I am looking for the compatability of CTS+ for XI 3.0.
We have Solution Manager 7.1 setup in place.
Please let us know if we can setup CTS+ on solution Manager (7.01 EHP1) and use it to transport XI 3.0 SP20 IR/ID objects across the XI landscape.
Regards,
Manoj -
[Transport / CTS] Production servers on a different site than dev servers
Hello,
My current customer has his development servers on a physical site A and his production servers on a physical site B (distance between the sites is 300kms).
How can we do to tranport the developments and customizing from site A to site B.
The customer doesn't want to mount sap/trans from site A to production servers as the exchange are not secured...
We will use CTS+ in a complex environment (ECC, BI, EP, SRM, PI, Solman)
Thanks in advance for your help
Thomas
Edited by: Thomas Fournaise on Mar 18, 2009 4:22 PMhello Thomas,
you can copy the datafiles and cofiles from dev to prod server and then manually add the transports in import queue of production server and do the transports
Hope that helps
Rohit -
Hello folks
Which is a better way to transport XI objects from QA to Prod?
CTS or CMS considering all the aspects Hardware etc?
ThanksHi,
Change management system (CMS)
Change Management Service (CMS) is part of SAP NetWeaver Development Infrastructure (NWDI). This service enables you to configure your transport landscape and manage the transport of objects between different systems.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
Automated procedure for tranporting....
1. Configure the CMs according to the envinorment and then no reason to login to server to copy the files.
2. Easier
3. Takes less time comapred to fielsystem
4. Feasible for lansacpae having more interfacess
5. COnfiguration has to be done setting various servers according to the server time spent in cofg may be more
CMS --> Its runs on J2EE engine.
Change Transport system (CTS)
The CTS is the central tool for managing changes to Customizing and Repository data that you make in the IMG or ABAP Workbench. The CTS records all changes in change requests.
http://help.sap.com/saphelp_nw04/helpdata/en/09/88f339db9911d2b41a00609419f767/content.htm
Difference between CMS & CTS:
Change Management Service (CMS) is part of SAP NetWeaver Development Infrastructure (NWDI). This service
enables you to configure your transport landscape and manage the transport of objects between different
systems.
It runs on JAVA Engine.CMS is generally used to transport Javadevelopment objects. The XI Integration
Server uses CMS to transport Integration Servercontent.
Change Transport system (CTS)
The CTS is the central tool for managing changes to Customizing and Repository data that you make in the
ABAP Workbench. The CTS records all changes in change requests.
CTS is the Product Completion Level.Shows the production process phase that has been reached by the
product.
SAP recommends the CMS, because that is the part of SAP NetWeaver Development Infrastructure, so obviously it is better and gives high performance according to my knowledge. -
XI Transports general question (SLD / CTS+)
Hi all, I ve the both following question : (it is not clear for me)
1) Does CTS+ transport management use SLD transport and target data linked with business system to adapt XI configuration (ID) regarding Business sender and receiver systems ?????
2) One of my customer want to install only 2 XI system.
- 1 linked with Dev & Quality R/3 environment
- 1 linked with production R/3 system
Is it possible regarding SLD content ?
How must the transports be managed in this case using CTS ?
Thanks a lotHi Jeans
for more deatils related Transports have a look on these links
Create a Tranport Target for the SLD entries.
<b>I think these blogs will help you-</b>
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
For more -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/a21e3e0987760be10000000a114084/frameset.htm
Re: Transports
Re: Multiple SLD in DEV QA and PROD XI and ID transports
Transports in XI using CMS, assembly issue
XI Transports
Thanks !!!! -
Import error in QA after implementing Enhanced CTS for PI NW 7.1 SP07
Hello Experts,
I had configured the enhanced CTS for transports in PI 7.10 SP07 landscape with reference to guide : How To ... Configure Enhanced CTS for SAP NetWeaver Process Integration 7.1 SP06.
We have created service user dedicated for import in QA box, having the SAP standard roles assigned SAP_XI_CMS_SERV_USER, SAP_XI_DEVELOPER and SAP_XI_CONFIGURATOR to the user.
But still at time of deployment facing the error " class com.sap.aii.util.misc.api.BaseRuntimeException:Parsing generic data instance: begin of unexpec
>>>ted element 'script'! "
Below is the complete tranport request log file...
Please help me on this asap..Deployment
Transport request : D15K900284
System : Q15
tp path : tp
Version and release: 375.33.79 710
Reading files from directory: /usr/sap/trans_P15/data/D15K900284/
found file: 6f334b007a0211df9ae500212862bd96
Collected 1 filenames from [/usr/sap/trans_P15/data/D15K900284/]
file deployment: Start copying files to '/sapmnt/Q15/global/xi/repository_server/import/D15K900284'
file '/usr/sap/trans_P15/data/D15K900284/6f334b007a0211df9ae500212862bd96' successfully copied
file deployment: 1 file(s) copied
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans_P15/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://dbciq15.al.sw.ericsson.se:59700
Double-stack system Q15
Deploy for XIR
Deploy File = 6f334b007a0211df9ae500212862bd96
Start of Web service log
Deploy Service called with following parameters:
CommunicationData-Type:1
CommunicationData-Address:http://dbciq15.al.sw.ericsson.se:59700/rep
CommunicationData-Host:dbciq15.al.sw.ericsson.se
CommunicationData-Port:59700
CommunicationData-User:'filled'
CommunicationData-Password:'filled'
Deployable(0)
Deployable-Type:1
Deployable-Id:/usr/sap/trans_P15/data/D15K900284/6f334b007a0211df9ae500212862bd96
class com.sap.aii.util.misc.api.BaseRuntimeException:Parsing generic data instance: begin of unexpec
>>>ted element 'script'!
com.sap.aii.util.hmi.core.gdi2.GdiCharStreamer$GdiCharReader.startElement (GdiCharStreamer.java:372
>>>)
com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.startElement (AbstractSAXParser.java:5
>>>33)
com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.scanStartElement (XMLNSDocumentSca
>>>nnerImpl.java:330)
com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl$NSContentDispatcher.scanRootElement
>>>Hook (XMLNSDocumentScannerImpl.java:779)
com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dis
>>>patch (XMLDocumentFragmentScannerImpl.java:1794)
com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument (XMLDocumentFra
>>>gmentScannerImpl.java:368)
com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (XML11Configuration.java:834)
com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse (XML11Configuration.java:764)
com.sun.org.apache.xerces.internal.parsers.XMLParser.parse (XMLParser.java:148)
com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse (AbstractSAXParser.java:1242)
com.sap.aii.util.hmi.core.gdi2.GdiCharStreamer.readGdi (GdiCharStreamer.java:54)
com.sap.aii.util.hmi.core.gdi2.GdiCharStreamer.stringToGdi (GdiCharStreamer.java:108)
com.sap.aii.util.hmi.api.HmiHttpClientImpl.sendRequestAndReceiveResponse (HmiHttpClientImpl.java:94
>>>)
com.sap.aii.util.hmi.api.HmiClientAdapter.invokeMethod (HmiClientAdapter.java:95)
com.sap.aii.ibtransportclient.impl.gen.XiHmiClient.invokeHmiTransport (XiHmiClient.java:161)
com.sap.aii.ibtransportclient.impl.XiTransportClientImpl.writeChangelistData (XiTransportClientImpl
>>>.java:234)
com.sap.aii.ibtransportclient.impl.XiTransportClientImpl.writeChangelistData (XiTransportClientImpl
>>>.java:251)
com.sap.aii.ibtransportclient.impl.XiTransportClientImpl.writeChangelistData (XiTransportClientImpl
>>>.java:255)
com.sap.cts.tcs.XICommunicator.importContent (XICommunicator.java:67)
com.sap.cts.deployer.XiDeployer.deploy (XiDeployer.java:63)
com.sap.cts.core.DeployManager.deploy (DeployManager.java:54)
com.sap.cts.ejb.DeployBean.deploy (DeployBean.java:100)
sun.reflect.GeneratedMethodAccessor9371_10000.invoke (null:-1)
sun.reflect.DelegatingMethodAccessorImpl.invoke (DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke (Method.java:585)
com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal (RequestInvocationC
>>>ontext.java:43)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:166)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke (Interceptors_States
>>>Transition.java:19)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:177)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke (Interceptors_Resource.java:
>>>71)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:177)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute (Interceptor
>>>s_Transaction.java:38)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke (Interceptors_Transaction
>>>.java:22)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:177)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:189)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke (Interceptors
>>>_StatelessInstanceGetter.java:16)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:177)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke (Interceptors_SecurityC
>>>heck.java:21)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:177)
com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke (Interceptors_Excepti
>>>onTracer.java:16)
com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed (AbstractInvocationCont
>>>ext.java:177)
com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain (DefaultInvocat
>>>ionChainsManager.java:133)
com.sap.engine.services.ejb3.webservice.impl.DefaultImplementationContainer.invokeMethod (DefaultIm
>>>plementationContainer.java:203)
com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process0 (R
>>>untimeProcessingEnvironment.java:353)
com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess
>>>(RuntimeProcessingEnvironment.java:329)
com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process (Ru
>>>ntimeProcessingEnvironment.java:211)
com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging (ServletD
>>>ispatcherImpl.java:155)
com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWithLogging (Servle
>>>tDispatcherImpl.java:96)
com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost (ServletDispatcher
>>>Impl.java:66)
SoapServlet.doPost (SoapServlet.java:51)
javax.servlet.http.HttpServlet.service (HttpServlet.java:727)
javax.servlet.http.HttpServlet.service (HttpServlet.java:820)
com.sap.engine.services.servlets_jsp.server.Invokable.invoke (Invokable.java:66)
com.sap.engine.services.servlets_jsp.server.Invokable.invoke (Invokable.java:32)
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet (HttpHandlerImpl.java:431)
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest (HttpHandlerImpl.java:289
>>>)
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet (RequestAnalizer.java:388)
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet (RequestAnalizer.java:377)
com.sap.engine.services.servlets_jsp.filters.ServletSelector.process (ServletSelector.java:85)
com.sap.engine.services.httpserver.chain.AbstractChain.process (AbstractChain.java:71)
com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process (ApplicationSelector.java:
>>>160)
com.sap.engine.services.httpserver.chain.AbstractChain.process (AbstractChain.java:71)
com.sap.engine.services.httpserver.filters.WebContainerInvoker.process (WebContainerInvoker.java:67
>>>)
com.sap.engine.services.httpserver.chain.HostFilter.process (HostFilter.java:9)
com.sap.engine.services.httpserver.chain.AbstractChain.process (AbstractChain.java:71)
com.sap.engine.services.httpserver.filters.ResponseLogWriter.process (ResponseLogWriter.java:60)
com.sap.engine.services.httpserver.chain.HostFilter.process (HostFilter.java:9)
com.sap.engine.services.httpserver.chain.AbstractChain.process (AbstractChain.java:71)
com.sap.engine.services.httpserver.filters.DefineHostFilter.process (DefineHostFilter.java:27)
com.sap.engine.services.httpserver.chain.ServerFilter.process (ServerFilter.java:12)
com.sap.engine.services.httpserver.chain.AbstractChain.process (AbstractChain.java:71)
com.sap.engine.services.httpserver.filters.MonitoringFilter.process (MonitoringFilter.java:29)
com.sap.engine.services.httpserver.chain.ServerFilter.process (ServerFilter.java:12)
com.sap.engine.services.httpserver.chain.AbstractChain.process (AbstractChain.java:71)
com.sap.engine.services.httpserver.server.Processor.chainedRequest (Processor.java:295)
com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run (Processor.java:222)
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
java.security.AccessController.doPrivileged (AccessController.java:-2)
com.sap.engine.core.thread.impl3.SingleThread.execute (SingleThread.java:152)
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
End of Web service log
Return Code = 12
Highest Return Code = 12
Deployment
End date and time : 20100617112451
Ended with return code: ===> 12 <=== -
Hi all,
I want to know the difference between CTS+ and CMS. Is there any additional advantage provided by CTS+ over CMS? Also what is the difference in the procedure to transport IR and ID objects in CMS and CTS+.
Any links to documents related to transporting IR , ID objects via CMS and CTS+ will be very helpful.
Regards,
SantoshHi,
What is CTS+ and why is is introduced:
The Change and Transport System (CTS) is a tool that helps you to organize development projects in the ABAP Workbench and in Customizing, and then transport the changes between the SAP Systems in your system landscape.
The XI use case for CTS+ introduces a new transport handling mechanism that offers tighter integration for the transport of ABAP, Java, and Integration Builder objects (Integration Repository and Integration Directory) using the Change and Transport System (BC-CTS) functionality.
As your XI system requires both the ABAP and the Java stack of the SAP NetWeaver Application Server, the following transport tools are available after installation:
u2022
The ABAP transport environment (BC-CTS)
u2022
The file export and import mechanisms or CMS integration to transport Repository or Directory objects in your transport landscape
In addition, you might also have to transport Java development objects by using the SAP NetWeaver Development Infrastructure itself.
The enhancements to CTS in combination with the SAP Solution Manager Change Request Management (ChaRM) address the following issues:
u2022
Synchronized transports for mixed systems (ABAP & Java)
u2022
A unified application for mixed system landscapes
u2022
Tracking of non-ABAP transports including Change Request Management
For your XI landscapes there will be one central transport environment with CTS+ where you can manage all XI-relevant transport objects from a single entry point.
This how-to guide describes the configuration settings you must make in the CTS+ system and XI systems. The functionality must be set up according to the release version of the integrated XI system. The two configurations will be described separately:
u2022
Configuration setup for releases prior to SAP NetWeaver 7.0 SPS12 (also for SAP NetWeaver 2004 SPS14 and higher).
u2022
Configuration setup for release SAP NetWeaver 7.0 SPS12 and higher.
Refer the link for CTS+ step by step method of transport:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80bbbd55-5004-2a10-f181-8bb096923cb6
http://help.sap.com/saphelp_nw04/helpdata/en/03/dcb6b6048711d3b42a00609419f767/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90d3b550-b6fb-2910-0fa5-ece5d61fb9c3
CMS is generally used to transport Java development objects. The XI Integration Server uses CMS to transport Integration Server content. When the Integration Server uses CMS to transport XI Content, no Component Build Service (CBS) or Design Time Repository (DTR) is used and can therefore be switched off. If you want to transport Integration Server content and Java developments (Java proxies or adapter modules), the CBS and DTR must be running.
If you transport Java developments, you should keep in mind that deployment of Java code can destabilize the runtime environment. Therefore, it is beneficial to install CMS on a separate server, as described in SAP Note 737368 for NWDI.
In this How-to Guide, CMS is installed together with an Integration Server system in the development environment. The advantage of this approach is that you have fewer steps in user management and CMS cannot influence the runtime of a productive environment.
With the enhancements of the SAP NetWeaver Change and Transport System (CTS for short, or CTS+ respectively, if specifically the enhanced capabilities are meant), available with SPS12 of SAP NetWeaver 7.0, the CTS has been enhanced to handle any type of object that can be transported in an SAP system landscape. Therefore, an administrator of your ABAP system can now also manage the transports for the non-ABAP parts of your system landscape.
You can now use CTS to transport (almost) arbitrary objects in an SAP system landscape with transport orders of the Transport Organizer:
u2022
Enterprise Portal archives (EPAs)
u2022
Exchange Infrastructure objects (TPZs)
u2022
Software component archives (SCAs)
u2022
Software delivery archives (SDAs)
u2022
Enterprise Application Archives (EARs)
u2022
ABAP objects
Development objects will be deployed according to their application type. Objects in a single transport order can be a mixture of all types u2013 however that only makes sense, if both are intended for the same system because transport paths are defined in the transport domain controller system.
CTS+ and usage type PI (SAP NetWeaver Exchange Infrastructure, XI)
o
If you are not using the Change Management Service CMS of the NWDI, you should seriously consider using CTS+ for your XI transports (CTS+ & SAP NetWeaver usage type PI).
o
If you are already using the CMS, you should postpone any planned migration to use CTS+ up to availability of SAP NetWeaver 7.0 SPS 13 , where integration will be enhanced futher.
o
In any case you should evaluate the enhanced CTS options of SAP NetWeaver 7.0 comming with SPS 12 and extensions planned with SPS 13/14 for XI transports u2013 in the mid and long term CTS+ is the best practice recommended by SAP for XI tranports.
CMS for SAP Exchange Infrastructure
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Configuration of CMS in Central NWDI & SLD to transport XI objects
Configuration of CMS in Central NWDI & SLD to transport XI objects
How to Use CMS in XI 3.0.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
CMS based transport in XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Regards,
Phani -
Error while transporting using CTS
Hello Everyone,
While transporting the ESR changes from Dev to integration environment i am getting this error.
Its a SOAP to RFC scenario and first time it worked fine. today when i did some changes and wanted to move again through CTS its giving a problem . Its SAP 7.11 version.
CTS Deploy Service - Version 0.93 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL =
SoapFaultCode:5 Authentication failed. For details see log entry logID=1ADC6A3175029F4D000000040025
>>>80B2 in security log.
Deployment
End date and time : 20120119234349
Ended with return code: ===> 12 <===
Thanks
RaviHi Ravi,
Please check this forum thread which talks about same issue:
CTS+ For PI Error: SoapFaultCode:5 Authentication failed
Regards,
Ashutosh -
CTS+ Transports in SAP PI 7.1
Hi experts,
we have a new installed SAP PI 7.1. Our scenario is that we have a single SLD for each PI System on dev, test and prod.
Now we are facings some troubles regarding the SLD setup. Our target is to use CTS+ to transport IR and ID objects. In the how to guides I found in SDN I found always settings within the visual admin to get this scenario run. But as I understood there is no more visual admin in SAP PI 7.1.
What are the required steps to connect my sld from dev --> test --> prod and what is additional to perform to get my ID objects transported from dev --> test --> prod.
Regards,
BjörnHi Bjorn,
CTS+ is a transport mechanism used to transport NWDS, IR, ID objects.....basically JAVA objects......
For CTS+ and NWDI...check it :
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d96022-9df5-2910-90b8-8e0580e0987e?overridelayout=true
Regards, -
Error when I am trying to export a SDA/SCA from CTS+
Hi,
We have configured NWDI and using CTS+ for transports. We are using the DI CM Services concept. So we didn't create any Tracks in CMS.
When I am trying to create an export from CTS+ system -> Development Configuration-> DI Export Services -> SCA / SDA export.
In this wizard it is successfully running 3 steps., but in 4th step (CTS Request), when it is supposed to generate the Transport request using the transport organizer, it is giving the following message.
Error during read of Transport Organizer URL for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE
Error during read of transport request for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE!
I tried to find some info in the application log file but did not find much information except couples of line below.
#1.#0019B9C3EE7C006500003FD0000007E500047FFB5C5B95BE#1266617469867#/Applications/DI/Export#sap.com/tcdictsconfigservice~appl#com.sap.di.cts.export.service.core.DIExportServiceBean.getDefaultRequest#ABC#44454##smp.com_SMP_519331850#ABC#a3cf42441da311dfac9d0019b9c3ee7c#SAPEngine_Application_Thread[impl:3]_21##0#0#Info#1#com.sap.di.cts.export.service.core.DIExportServiceBean#Plain###Failure: Error during read of transport request for system 'EPD' and user 'ABC': !NO_DEST_DETAILS_CHECK_STACKTRACE!#
I really appreciate, if some one can help.
Thanks,
Ramu JHello Ramu
I see that you have not been able to find a solution for this.
Can you provide some more information which may help the other SDN posters to assist you?
Thanks
Kenny -
How to tranport the users from SAP R/3 to portal ?
Hi All,
I had connected to SAP R/3 system from portal. I am trying to tranport the users from SAP development server . So that everyuser can enter through the portal only and work on SAP.
Please guide me the procudure how can i tranport the users from SAP system to portal.
Please urgent replies are appreciated .Hi Abhishek,
Thanks for your information.
please let me tell you the detailed information. My basis guy had configured the system for me as i didnt have any idea on installation procedure. So i am facing th e fallowing problems.
<b> First Problem</b>
I am not able to create the user from portal directly. Its showing the fallowing error.
<b>An error occurred in the persistence; contact your system administrator</b>.
so i had created the users in WAS by SU01.
<b>Second</b>
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
<i>If u dont mine Please provide with me the steps to fallow</i>
<b>Third</b>
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
<b>Could not able to look up the system.</b>
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent -
Error when adding EPA file to transport request via CTS
I have a rather strange problem. Sometimes when attempting to add an EPA file to a Transport Request via CTS I get the following error in my logs with a corresponding short dump. This does not happen all the time.
#000255D36E8F005B00015391000003DC00046C0470FF1359#1244666238275#com.sap.portal.pcdadmintools#sap.com/irj#com.sap.portal.pcdadmintools#MOROZOWSKIJO#24750##rp1.conair.com_RP1_2406850#MOROZOWSKIJO#28167c7055fe11dea0f1000255d36e8f#SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#/System/Server#Java### [com.sapportals.portal.pcd.admintools.export.ExportCTSHandling] Could not attach epa file to transport request
[EXCEPTION]
{0}#1#com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details):CTS_FILE_APPEND_TO_REQUEST, (service=com.sap.tms)
at java.lang.Throwable.<init>(Throwable.java:216)
at java.lang.Exception.<init>(Exception.java:59)
at com.sap.tc.di.draft.ts.TsException.<init>(TsException.java:19)
at com.sap.tc.di.draft.ts.TsServiceException.<init>(TsServiceException.java:16)
at com.sap.tc.di.draft.ts.TsExecutionException.<init>(TsExecutionException.java:16)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsException(TmsJCoExceptions.java:35)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:536)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.handOverAsStream(TmsTransportService.java:253)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.requestUpdate(TmsTransportService.java:202)
at com.sap.tc.di.draft.ts.impl.TransportRequestImpl.transmit(TransportRequestImpl.java:97)
at com.sap.tc.di.draft.ts.impl.TransmissionPackageImpl.transmit(TransmissionPackageImpl.java:49)
at com.sapportals.portal.pcd.admintools.export.ExportCTSHandling.attachFileToPackage(ExportCTSHandling.java:209)
at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.prepareGenericPageSettings(ExportStatusPage.java:417)
at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.dispatchPageRequest(ExportStatusPage.java:241)
at com.sapportals.portal.pcd.admintools.export.ExportMain.doContent(ExportMain.java:89)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:166)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:111)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:438)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:404)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:103)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The current application triggered a termination with a short dump.
at java.lang.Throwable.<init>(Throwable.java:194)
at java.lang.Exception.<init>(Exception.java:41)
at java.lang.RuntimeException.<init>(RuntimeException.java:43)
at com.sap.mw.jco.JCO$Exception.<init>(JCO.java:1117)
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1224)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3909)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:112)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:133)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:531)
... 38 more
Edited by: Jon Morozowski on Jun 10, 2009 10:57 PMHere is the short dump in the ABAP system.
Short text of error message:
INTERNAL ERROR UPDATING REQUEST DESC OF RP1K900690
Long text of error message:
Technical information about the message:
Message class....... "PU"
Number.............. 601
Variable 1.......... "INTERNAL ERROR UPDATING REQUEST DESC OF"
Variable 2.......... "RP1K900690"
Variable 3.......... " "
Variable 4.......... " "
I have checked the RFC destination in the J2EE Admin and that works OK. This has me kind of stumped. -
One CTS+ for multiple landscapes?
We have about 15 landscapes (ECC, R3, CRM, BI, PI, etc.)
Each landscape has its own single SLD.
We want to configure ONLY one CTS+ on an SM7.0 to handle all of the change
request management for the 15 landscapes.
Is this possible?
Thanks!Hi,
You can have a single CTS on multiple landscapes.
Checkout the pdf which shows the SAP best practice
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10456aac-44f7-2a10-1fbe-8b7bcd7bcd58
Rakesh -
How to Migrate the open transports in CTS+
Hi Experts
We are planning to implement CTS+ in our organisation, after implementing the CTS+ it's possible to migrate the open transports in CTS+
Thanks & Regards
VenkatHi venkat,
what i understand is you are already having some TR on which work is gng on and now you want to add.
no problem
in your CTS+ when you create a TR just merge the old TR into this
or
you can also you the Copy objects
in SE09
this is very common technique use by developers so just ask them to check in se09.
how it ans ur query
Regards
Prakhar
Maybe you are looking for
-
Possible to show file upload progress for web form submission?
I just made a simple form as a test. There are 3 files being submitted here via a "web form". Files being uploaded in this case are of these sizes: 110MB 9MB 24MB I'm testing functionality that will let a print shop's clients upload their files. For
-
Producing short history lessons with iBooks author?
For years I have produced history lessons and provided them as free PDFs on my website. I'd like to offer short history lessons (with primary historic documents and images) via iBooks in iTunes U. I expect them to run only 10-12 pages. Is there any m
-
?? re: Syncing email
Hi, I don't have an iPhone yet, but was wondering how syncing the email works. I have .Mac email and also Gmail. To be honest, I haven't figured out the sync entirely in .Mac email, but no biggie because I don't usually use it. My question is if your
-
Hello everyone. This might sound trivial to some, but let me ask anyhow. Should iCloud "disk" appear in Finder and on the desktop of iMac, similar to the old iDisk and mobileMe disk?? After upgrading to Mountain Lion, I do not see the iCloud disk ima
-
Dear sir, My test stand sw is working normally on Windows XP also PXI cards but when I turn off my computer (when the windows message is " you can turn off the computer safely) led on the PXI computer does not turn off so that to I can use the comput