Cube Problem
Hi Friends,
I'm unable to see cube on infopackage level.I have created infopackage but my datatarget(cube ) not coming.
1. Infocube ( Activated executable)
2. Update rules activated (Everything perfect)
3. I checked infosourece (Correct)
4. Infosource assignment also correct.
I think problem with cube...What's the problem
Please help...
Regards,
Nag
Hi,
No chance . It should come there if the update rules are in Active.
After activating the UR , Clcik on refresh button in INFOSOURCE tree.
With rgds,
Anil Kumar Sharma .P
Similar Messages
-
Dimensions and viewing the cube problem
hi there,
I have a problem viewing the OLAP cube in excel
with OracleBI add on i see the hierarcy gone for a toss,
when i view with ROLAP in enterprise manager 9.6 it seems to be fine.
i have the dimension table structure as follows
ID
CODE
OPERATOR
CITY
STATE
COUNTRY
FLAG
TYPE
hierarcy as
TYPE
FLAG
COUNTRY
STATE
CITY
OPERATOR
my data as follows
type, flag, country, state, city, operator
National,Wireless,India,Kerala,Vaikom,Reliance
National,Wireless,India,Kerala,Vaikom,Reliance
National,Landline,India,Andhra,Vaimpalli,BSNL
National,Landline,India,Tamil,Valapady,BSNL
National,Landline,India,Gujarat,Valia,BSNL
National,Landline,India,Gujarat,Vallabhipur,BSNL
National,Landline,India,Rajasthan,Vallabhnagar,BSNL
National,Landline,India,Tamil,Valliyoor,BSNL
National,Wireless,India,Tamil,Valliyoor,Reliance
National,Wireless,India,Tamil,Valliyoor,Reliance
International,Landline,Vanuatu,Vanuatu,Vanuatu,Landline
International,Landline,Vatican,Vatican,Vatican,Landline
International,Landline,Vatican,Vatican,Vatican,Landline
International,Landline,Venezuela,Venezuela,Venezuela,Landline
International,Landline,VietNam,VietNam,VietNam,Landline
International,GSM,Estonia,Estonia,Estonia,Emt
International,GSM,Estonia,Estonia,Estonia,RadioLinja
In the Level "TYPE" there are two categories National and International
but when i view the data only one category is shown i,e national and category international
is shown at the lowest level without any children. i.e at "OPERATOR" LEVEL.
All children of International is pusshed to National
i.e
type, flag, country, state, city, operator
National,Landline,Vanuatu,Vanuatu,Vanuatu,Landline
National,Landline,Vatican,Vatican,Vatican,Landline
------------------------------------------International
Is there any other way to do this, I have not declared any attributes for the above dimension.
Kindly helpYou probably have same values in different levels. e.g Vatican in Country, State Level as well as City Level.
OLAP requires that each level should have a unique ID. It always go by the values rather than the logical levels. Try to create a unique level id for each level, and put the names in long and short descriptions. That should solve your problem.
Hope this helps.
Suresh. -
I have problems in manage of the cube or list cube for the 0BCS_VC11 cube.
Data is there in the real time cube and no problem in the connection as well.Is these due to new NW2004s functionality any settings to be done for virtual cubes??
thanks<b>Steps -</b>
For a BCS following criteria is mandatory,values below are as per my client specific requirement you may have different values.
Restrict fiscal year variant = K4
0CS_CHART(Cons Chart of Accts) = 99
0VERSION(Version)=900
Hope it Helps
Chetan
@CP.. -
Cube Problem... HELP
Hello,
I just purchased a nice looking G4 Cube at Good Will for 60 bucks! One problem... When I turn it on; it boots 10.2, goes to the loading aqua bar, and sits at 100%. 1 minute after, the fans will get loud and the monitor will flicker about 2-3 times. What should I do? Is this a hardware or software problem?
Thanks, Mark.Hi.....
After generate export datasource.............Right click on the Myself Source system and replicate the datasource...........in this case no need to create seperate update rules,infosource or Transfer rules........just create the infopacjage and load data......
Check this.......
Creating an export datasource for an InfoCube
Export datasource for an infoobject with Direct update
Regards,
Debjani....... -
Hi, I was watching the Mark Spencer tutorial on making up a 3D cube (Macbreak video). I made the cube up as instructed, all was fine, seamless cube. But I wanted to drop an image on each face, made up some 400x400 images, dropped them in, so far looking good. But rendered out, the edges don't seem to be seamless, I can see an open join and I can see the image on the other side. It's a very narrow gap. I have checked my image size etc, I am stumped, where did I go wrong?
There isn't a way to make those tiny gaps close as Motion is antialiasing everything and therefore the edge pixels will have some transparency. I have had this confirmed from an Apple source when I made my original cube back in 2007 as I hit the same problem.
http://idustrialrevolution.com/component/option,com_sobi2/sobi2Task,sobi2Details /catid,2/sobi2Id,14/
One thought though, try running in draft mode - that might help.
Peter
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Quick question - AWM - simple cube problem
im using AWM 10.2.0.3
my fact table:
1 program1 100eur
2 program1 200eur
3 program2 130eur
i have only one dimension (program).
Aggregation operator is Sum.
when i generate the cube the sum in AWM Data Viewer is only 230eur (the second program - 200eur is not included)? why? is that a feature or bug?
im using [http://wiki.oracle.com/page/Getting+Started+With+Oracle+OLAP+Option|http://wiki.oracle.com/page/Getting+Started+With+Oracle+OLAP+Option] tutorial, but didnt found anything there...
thanks for any help.
regards. KristjanKristjan,
The fact you mentioned has program1 repeating. In AWM you should not have repeated dimension key combination otherwise the last loaded record will only loaded. So my suggestion is that you should do a sum(measure values) and group by (all dimensions - in current case it is just 1) before loading into cube.
So you can create a view like below
create fact_vw as select program,sum(eur) from <fact table> group by program
Now use this fact to load the cube.
Why do you see 230?
=============
200 eur is loaded against program1 and when 100eur comes again for program1, earlier loaded value is replaced by 100 and then for program 130. Total is 230 eur.
Thanks,
Brijesh -
Hello I've tested a 3D cube but I can't see correctly the faces and when I send cache to true it's not workig :(
If someone else have experience with -Xtoolkit prism
public class Cube extends CustomNode {
public var origin: Point3D = Point3D{}
public-init var size: Number = 100;
init {
children = [
for(n in [0..1]) [
Rectangle {
fill: Color.LIGHTGRAY
stroke: Color.BLACK
strokeWidth: 2
translateZ: size*n
width: size height: size
Rectangle {
rotationAxis: Point3D {
x:0 y:10 z:0
rotate: 90
fill: Color.LIGHTGREEN
stroke: Color.BLACK
strokeWidth: 2
translateX: (size*(n-.5))
translateZ: size/2
width: size height: size
Rectangle {
rotationAxis: Point3D {
x:1 y:0 z:0
rotate: 90
fill: Color.LIGHTSKYBLUE
stroke: Color.BLACK
strokeWidth: 2
translateY: size*(n-.5)
translateZ: size/2
width: size height: size
function run() {
def feats = ConditionalFeature.values();
for(f in feats) {
println("feature {f}=>{Platform.isSupported(f)}");
def cube = Cube {
size: 100
opacity: 1
rotationAxis: Point3D{z: 1}
def grp = Group {
rotationAxis: Point3D{x: 1 y: 1}
rotate: 60
translateZ: 100
translateX: 100
translateY: 100
content: cube
Timeline {
repeatCount: Timeline.INDEFINITE
keyFrames: [at(2s){ cube.rotate => 360}]
}.playFromStart();
Stage {
title : "3D Cube"
onClose: function () { }
scene: Scene {
width: 300
height: 300
fill: Color.TRANSPARENT
camera: PerspectiveCamera {
fieldOfView: 200
content: [
grp
}As of my experiences with the new 'SCENE3D' conditional (optional) feature my conclusion is:
The cube faces (Rectangle) are drawn in order of their position in the children sequence: if face (j) overlaps face (i; i < j) it is drawn on top. Their z-/depth-values are ignored! So, if a face is rotated away from the camera's position and its z-values are increased it is drawn still not before the predecessors in the sequence are drawn.
In case of a simple model like a cube or box this dilemma can be solved by hiding (visible = false) all covered faces. A cube's face is covered when its frontside 'Normal' is directed away from the camera.
Doing more complex 3D modelling and animation based on these features would be a nice way to torture students by a (sadistic) professor.
Elsewhere it is said that the new 'prism' renderer is only +"... available in the 1.3 development environment, but *not in a deployed applet or JWS*."+ and +"... used on TV, it is *not supported in 1.3 on desktop*. Turning it on manually is for development purposes and kicks and giggles. Actually deploying an app with it turned on may or may not work in this release"+.
August -
i have a cube which is getting data from multiple odss. all of the requests in my cube are showing green 'successful'. but i need to go and delete the last 4 requests that came from one ods only, the rest of odss requests are fine. this cube is only getting deltas from its odss. can someone tell me stepbystep process how to do this?
thankyou.Hello,
Please note that when you will try to delete these 4 requests loaded from one ODS, it will automatically delete all the requests which will be in between these requests. So you would have to reload data not only from this DSO, but also data deleted from the other DSO.
Also note that, it is not enough to set the request status red only in the DataTarget but also in Monotor, or it wont allow you to load again.
Then you need to go to the below ODS, delete the datamart status of the 4 requests. Then right click on the ods and select update to 3.x targets and load the data.
Please let me know if you need more help.
Regards,
Pankaj -
Sort in date order from Essbase cube source
Hi everyone,
I have an Essbase cube which I'm displaying the data from in OBIEE. Within the cube one of the dimensions is a date ( set as a time dimension ).
It has several generations:
Gen2 - Year, 2010
Gen3 - Year/Quarter, 2010/Q1
Gen4 - Year/Month, 2010/01
Gen5 - Day/Month/Year, 26/01/2010
If I produce a report filtered on the Year, say 2009, and display the full date, it puts all twelve 1st's of the month first, then the 2nds, and so on. I can resolve this by putting the Year/Month field into the report and sort on that, then the full date, but I really only want the date in chronological order.
Can anyone advise on the best way to achieve this?
Thanks to all in advance.
Bagpuss
Edited by: Bagpuss1969 on Jan 26, 2010 12:46 PM
Generation 5 is DD/MM/YYYYAnd this is one of the reasons why OBIEE/Essbase integration is still #1 on the [Dont Try This At Home Kids|http://majendi.blogspot.com/2009/06/dont-try-this-at-home-kids.html] list.
One of the most basic facts about the current integration - which is often disregarded - is that dimension levels and hence their contained members come across as pure VARCHARs. Sort order-wise this gives you a standard alpha-numeric sort order by default.
However there's a workaround which we discussed just last week: Oracle BI import Essbase cube (problem on the months)
Essbase defines the sort order. Otherwise it's alpha-numeric.
C. -
Issue in loading ODS to CUBE(URGENT)
Hi All,
We are facing an issue in loading AR,AP and G/L ODS to Cube.
The steps we done are
1) Repair full request is done in ODS got around 35 lack records.
2) Done Full load in Cube n got 35 lack records.
3) Done delta load in ODS got 189 records.
4) Done delta load in Cube got 1 lack records.
This is where we guys couldnt find out what went wrong??
1 lack records to cube is not possible...??
Did we went wrong any where..??
Could any one guide us to do What has to be done??
Kind Regards,
Shanbagavalli.SHi,
Thanks for the response.
Already delta is done in the Cube and ODS.
No we didn't do intialization . We did repair full in ODS and full update to cube,.
What we have done is
We planned to do the selective deletion from G/L cube for Q2 2007.
Done a repair full request to ODS
From ODS to Cube a full load. (as we have deleted the data from the cube)
Problem is after doing this it has pulled data for Saturday, Sunday, Monday and Tuesday.(past five days)
But the problem is wilth delta.. it is still pulling only 189 same records that got pulled in yesterday evening data load
Can you tell me wat are all the methods to load those days records also delta records to CUBE.
Thanks in advance.
shanba
Message was edited by:
shanbagavalli shivasankaran
Message was edited by:
shanbagavalli shivasankaran -
Hi Experts,
i am trying to implement SEM-BCS. I am still new in it. Are there any documentation about step by step to configure SEM-BCS?
Thanks a lot for your help.Hi,
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=bw-bcs&cat=sdn_all
Basics of BCS modelling -
Key figures -
You are generally not permitted to change any properties of the key figures used in SEM-BCS. The only exceptions to this are options that affect the display in Business Explorer and the "Characteristic is document property" setting.
If you want to use your own InfoObjects as key figures for totals records in the InfoCube, consider the following conditions:
1. SEM-BCS supports four roles for key figures in the data stream for totals records: Value in group currency, value in local currency, in transaction currency and quantity. You can assign a maximum of four key figures in the data basis accordingly. If you include additional key figures in the InfoCube, these cannot be processed in the consolidation. You are not permitted to assign other roles, such as 'subassignment,' to key figures either.
2. In SEM-BCS, the values are always stored periodically in the database. Furthermore, year-to-date values or non-cumulative values are not managed separately but result from cumulation in each case over the periods of the current fiscal year up to the current period. (This is a purely technical restriction. The consolidation functions greatly support the process with year-to-date values.) Therefore, you must define InfoObjects as cumulative values. Proceed according to the 0CS_TRN_GC, 0CS_TRN_LC, 0CS_TRN_TC, 0QUANTITY InfoObjects that are delivered.
3. You cannot use referencing key figures in SEM-BCS. If you want to define a key figure with a reference, to transfer the technical properties of the referenced InfoObject identically, you can simply create this with a template instead. However, if you want to use the special BW function linked with referencing key figures (see the online documentation in the BW), enter the referencing key figures in the InfoCube, but assign the referenced key figures to the data basis.
Characteristics
With the following characteristics, you are not permitted to make changes to the properties. Once again, the only exceptions here are the options that affect the display in Business Explorer:
0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR, 0BCS_AREA, 0BCS_AUTODL, 0BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COITOA, 0BCS_CTFLG, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWNEG, 0BCS_GWPROC, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_ORGCH, 0BCS_ORGCHL, 0BCS_PRGRP, 0BCS_REFPER, 0BCS_REFYR, 0BCS_SEQNM, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0CS_COIAC, 0CS_COINR, 0CS_PLEVEL, 0CURRENCY, 0DATE, 0UNIT, 0USERNAME
Compounding -
When you define the compounding of an InfoObject, some compound relationships are not supported:
You cannot compound subassignments to consolidation units.
You are not permitted to compound the document type and the (0CS_PLEVEL) posting level.
You cannot compound noncurrent assets and assets/liabilities to 0BCS_ALTYPE. In addition, you cannot compound to a characteristic from the totals cube, with the exception of consolidation units, partners, and so on, and their higher-level characteristics.
ODS objects / Virtual InfoProvider -
You can generate the ODS objects for additional financial data and the virtual InfoProvider from the data basis maintenance. However, you can also create these manually and enter them in the data basis. If you do this, create the ODS objects and virtual InfoProvider with the same characteristics and structure they would have had if generated by the data basis maintenance. You can only deviate very slightly from this.
You are not permitted to include the following InfoObjects in any InfoProvider, unless they are generated by the data basis automatically:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY
The following InfoObjects must not be contained in the InfoObject catalog, which is defined in the data basis:
0BCS_AREA, 0BCS_REFPER, 0BCS_REFYR, 0BCS_TASK, 0BCS_TASKGR, 0BCSTASKTY, 0FISCYEAR, 0FISCPER3
Time characteristics -
SAP consolidation SEM-BCS ignores changes with the 0FISCPER, 0FISCPER3, 0FISCVARNT and 0FISCYEAR time characteristics. If you make changes, for instance, if you create hierarchies or attributes, these are not taken into account by SEM-BCS. Therefore, there is no maintenance in the workbench, you cannot use the hierarchies or attributes in the functions of SEM-BCS for selections and so on, and you cannot use the attributes or hierarchies for selections in BW queries.
Characteristic values
The following InfoObjects may have the values set by default by SAP only . You are not permitted to change them, not even by using the BW master data maintenance:
0BCS_AREA, 0BCS_AUTODL, 0BCS_COISRT, 0BCS_CTFLG, 0BCS_DIDIEL, 0BCS_GWMEM, 0BCS_GWPROC, 0BCS_IPAAC, 0BCS_IPATTY, 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8, 0BCS_REPMOD, 0BCS_TASK, 0BCS_TASKGR, 0BCS_TASKTY, 0BCS_TAXSUP, 0BCS_TIMMOD, 0CS_COIAC, 0CS_PLEVEL
For these InfoObjects you can only use the tools of the master data service of the Financial Basis to synchronize master data, so the master data is transferred by the SEM-BCS tables to the BI tables, but not the other way round.
Predefined InfoObjects for individual roles
The system automatically uses most of the InfoObjects mentioned here to activate certain data streams. However, there also are some InfoObjects that you must manually enter in the cube for the totals records. Subsequently, you must assign certain roles to these InfoObjects. These roles are allowed for these InfoObjects only, you cannot assign these roles to other InfoObjects.
These are:
0CS_PLEVEL for the posting level role (required)
0BCS_CTFLG for the conversion role (optional)
0BCS_PRGRP for the product group role (optional)
Activate characteristics and key figures from BW Content
Before you create a data basis of SAP consolidation, you have to activate certain InfoObjects from BW Content.
1. You must always activate the following: 0CS_PLEVEL, 0FISCPER, 0FISCPER3, 0FISCVARNT, 0FISCYEAR.
2. If you use documents, you must also activate: 0AC_DOCLN, 0AC_DOCNR, 0AC_DOCTEXT, 0AC_IVDOCNR, 0AC_IVPER, 0AC_IVYEAR, 0AC_OIDOCNR, 0AC_OIPER, 0AC_OIYEAR, 0AC_ORDOCNR, 0AC_ORPER, 0AC_ORYEAR, 0AC_RVDOCNR, 0AC_RVPER, 0AC_RVYEAR
3. If you use the virtual InfoProvider, activate: 0BCS_REFPER, 0BCS_REFYR, 0BCS_REPMOD, 0BCS_TIMMOD also
4. If you use any data stream in addition to the totals records, also activate: 0BCS_OBJNR1, 0BCS_OBJNR2, 0BCS_OBJNR3, 0BCS_OBJNR4, 0BCS_OBJNR5, 0BCS_OBJNR6, 0BCS_OBJNR7, 0BCS_OBJNR8
5. If you use the data streams of the consolidation of investments, activate: 0ACQ_PER, 0ACQ_YEAR, 00BCS_BGPER, 0BCS_BGYEAR, 0BCS_COIACT, 0BCS_COIFUT, 0BCS_COIINA, 0BCS_COINRT, 0BCS_COIPGW, 0BCS_COISRT, 0BCS_COITOA, 0BCS_DPER, 0BCS_DTEQI, 0BCS_GWLC, 0BCS_GWMAN, 0BCS_GWMEM, 0BCS_GWNEG, 0BCS_GWOFFS, 0BCS_GWPROC, 0BCS_GWRED, 0BCS_LCCMU, 0BCS_LCIC, 0BCS_SEQNUM, 0CS_COIAC, 0CS_COINR
6. If you use organization changes, activate: 0BCS_ORGCH, 0BCS_ORGCHL
7. If you use data streams for stock and delivery data, activate 0BCS_PRGRP.
8. If you use data streams for assets/liabilities or noncurrent assets, activate: 0BCS_ALTYPE, 0BCS_DPER, 0BCS_DYEAR, 0BCS_IPADAU, 0BCS_IPALCM, 0BCS_IPATTY, 0BCS_RETBG
The list of the InfoObjects varies depending on the release. Of course, you do not have to activate InfoObjects that do not exist in your release.
You do not have to activate InfoObjects that are not explicitly specified. However, if you do not activate them, some functions may not be available to you. For example, if you do not activate the 0BCS_CTFLG InfoObject and do not use it for totals records in the InfoCube, the currency translation cannot display any currency translation differences on the initializing data records.
Attributes When you define the InfoObjects in BW, attributes can be assigned to InfoObjects. This results in the following restrictions:
In SEM-BCS 3.1B, 3.2 and 3.5, no InfoObjects that appear in the permanent parameters of a consolidation area or are fixed in a consolidation area may be attributes of an InfoObject used in SEM-BCS.
InfoObjects that are used as a consolidation unit must not have 0FISCVARNT as an attribute.
Note 727776 - Requirements of SEM-BCS for data model
Hope it Helps
Chetan
@CP..
Eugene Khusainov
Re: BCS - Modelling requirements
Posted: Feb 24, 2007 10:56 PM in response to: moini kembly Reply E-mail this post
Hi,
On this phase you should determine and describe the following:
- sources of data to be consolidated (R/3, flat files, 3rd parties)
- methods of receiving/uploading these data into BW
- the appropriate BW objects (characteristics, key figures, cubes etc.)
- time characteristics to be used (is it enough to have only fiscal chars? do you need the calendar ones too?)
- is data upload to be directly into totals cube? if not - consider the intermediate cube. What kind of data transformation is to be done during upload of data from interim cube to the totals?
- methods of getting data into totals cube (flexible upload, reading from datastream, manual entries)
- will you need additional financial data? if yes, which ones and how will you load this data?
- what types of data you need to consolidate (actual, plan, forecast etc.)
- how many chars will be given the VERSION role?
- plan the number of consolidation areas. The best way is to have the only one. it will minimize the customization.
- how many consolidation units hierarchies do you have (for example, if you need consolidated reports according to management and IFRS structure of the group, then you have 2 hierarchies)?
- determine the structure of the group hierarchies.
- what is the group's currency? is it one currency or several ones?
- determine the currency translation methods for each data type.
- make sure that all consolidation units have the same chart of accounts. if not, consider the mapping or transformation of the numbering of accounts.
- consider the currency translation types for different groups of accounts in the balanse sheet (for example, fixed assets and equity - historical rate, retairned earnings - everage rate, non-monetary items - current rate etc.).
- consider the kind of translation - periodic/cumulative for different data types and reports.
- determine the set of consolidated reports as an output.
- which custom characteristics you need to bring to the totals cube in order to get the reports needed?
- which standard chars you'll have to customize and how exactly (bringing new attributes, customizing the std or creating the custom chars)
- if you'll replace a standard char with a custom one, consider that some another chars may depend on the char to be replaced. it's especially true for a company code. if you use a custom char for a company, then you have to use the reference chars for partner company, investee company, allocation company etc.
- will your consolidation units be one-dimension structure (by company) or it is a matrix one? if the latter, what is the second cons unit?
- will the BCS functionality cover all your consolidation needs? if not, consider the workarounds. reclassification is to be considered as a tool # 1.
It's just an incomplete introduction to the issues to be determined during a blue-print phase.
Re: BCS in NW2004s
Re: BCS - Data modelling KF question
Re: BCS - Virtual Cube Query error
Re: BCS- data basis
Re: BCS - Virtual Cube problem
Re: BCS - Consolidation group data
check these links...
http://help.sap.com/saphelp_sem40bw/helpdata/en/67/f7e73ac6e7ec28e10000000a114084/frameset.htm
Re: Synchronize Master Data between BCS and BW within the same SEM system
/message/1508507#1508507 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-sem/dataflow-from-r3-to-sem-bcs-950671
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/6e01a04e-0a01-0010-dfbe-951c2c39d169 [original link is broken]
http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/9057475ca611d4b2e30050dadfb23f/frameset.htm
Hareesh -
Hi Frnds,
After implementing Note 1145673 .
DTP is not working . uploading wrong number of records to cube .
problem is with only one DTP.
Source is having 851 records as now & same number is updated into cube 851
next day source is loaded with 4 records . target is loaded with 855 ( again loaded previous records in deltat)
while extracting in DTp it is showing only 4 but in transformation showing 4 records to 855 records..
any one has any idea about this ?
BR
RavinderHi Vikash,
update type delta only
i told the same in my previous message . In DTP extraction message is showing extracting 4 but in while passing transformation it is picing more number of records.
BR
Ravinder -
Stage3D semi transparent textures
I have been playing arounf with the Stage3D with moderate success but i have an issue rendering transparent textures.
as you can see some of the faces at the back are only partially rendered.
E.g. the bottom face is rendered through the front face but not through the side face)
Does anyone have any idea what might be causing this sort of behaviour?
you can see the demo here. (www.spoboyle.co.uk/demo/) click to pause the rotation
I have also included a screen shotI have a solution now for the cube problem (or any convex polygon)
cull the front faces draw the polygon and then cull the back faces and draw again.
so generally when dealing with semi-transparent objects
first draw all opaque objects
then draw all semi-transparent objects in order starting with those furthest away from the camera (convex objects should be drawn twice as mentioned above)
if you have any concave polygons all I can say is good luck!
I have removed all the above links and placed all the files here. -
Extract data from Essbase - MDX/Report Script
Hi,
I was trying to extract data from an ASO cube using both MDX and Report Script approaches.
I liked the MDX_ method since i could specify:
- level zero members with values for the Revenue measure.
SELECT
{[Revenue]} on columns,
NON EMPTY{[Accounts].Levels(0).Members} on AXIS(1),
NON EMPTY {[Accounts2].Levels(0).Members} on AXIS(2),
NON EMPTY {[Accounts3].Levels(0).Members} on AXIS(3),
NON EMPTY {[Accounts4].Levels(0).Members} on AXIS(4)
FROM CUBER.CUBER
Problem:_ For other measure, it shows many #Missing at Cost measure field. Not sure how it happened. I tried to use:
SELECT
{[Revenue]} on columns,
NON EMPTY{ FILTER ([Accounts].Levels(0).Members}, [Revenue] <> Missing) on AXIS(1),
NON EMPTY {[Accounts2].Levels(0).Members} on AXIS(2)
FROM CUBER.CUBER
But still does not solve the issue.
Then i tried to use Report Script_ approach. However, it is not simple to declare that i want all level zero members within dimension Account1 (which has 5 level hierarchy, with level zero members almost each level) and only entries that has values for my measure "Revenue" or "Cost"Hi Ye
For extracting data from Essbase you need to have either Calc script or Report script and you have to use LKM Essbase(Data) to SQL as your KM
For loading data into SQL server you can use IKM SQL Append or IKM SQL incremental update.
When you use Essbase as your source you have to use LKM ESSBASE (MetaData) to SQL as your KM.
So all sources would have LKMs (as KMs) and all targets have IKM as KMs.
-app -
hi
i am facing data from problem from dso to cube
i am getting daat into dso
plant material doc_num itemno qty
p1 m1 1 1 10
p1 m1 1 2 20
dso i am uisng key fields
doc_no
item_no
doc_year
data fields
material
plant
qty
while loading data into cube
its showing only
p1 m1 1 2 20
item 1 is missing
there is no iten num filed in my target field?
ple let me know ur idea.Hi,
The problem is in your ODS/DSO.
In your ODS you have 'Doc_num' as key field.
For both Items 1 & 2, you have same key field ( Doc_Num) Value.
So, the first record will be over written by the second one. So from your ODS you will get only the latest record to the Cube.
If you want to send both doc_nums to cube, you need to bring doc_num to the data fields area of ODS.
Hope this helps.
Cheers
Praveen
Maybe you are looking for
-
How to post URL link in sap script
How to give link in sap script.. For example if someone select [sap|www.sdn.sap.com]. it will direct to www.sdn.sap.com Regards Sas PS: Insert Test --> Hypertext option tried but not working properly... Hey no replies....any one any idea?
-
I updated my ipad and now it won't connect to a server
I updated my ipad and now it won't connect to the server???
-
Can LabVIEW call a function from a .sys file or is LabVIEW limited to dll access?
My vendor has sent me a .sys file with functions accessing their hardware. Can i call these function from labview directly or do I have to wrapper the .sys with a dll?
-
HT201272 How do I re-download songs that didn't download correctly?
Some of my songs did not download completely, they stop with 1:14 left in the song. How do I re-download these songs?
-
help i can't see login window after i shutdown and release battery when i boot with command -v push the log looping like this mds[22] (error) import: importer:0x84ae00 start failed for 501 (kr:268435459 (ipc/send invalid destination port) mds[22] (er