Cucm , Cube via Sip and Sip Trunk to ISP , Outgoing calls not working
Hi
We have issue with the outgoing calls to sip trunk
Below is the config and the debugs
It will be great if you give your thoughts since we have stuck here
My thoughts are:
i see that for unknown reason the called number is going with 4 digits instead of 8 digits
i dont see any sip message comming from ISP
Maybe the call not going there ? to isp trunk? From the trace the call hit the correct dialpeer 888 but i see 4 digits as a called number , but i dodnt understant the reason to translated in 4 digits the called number.Not apply a translation rule for that
confused!!!
Calling Numbner:22324086
Called Number: 23823690
CUCM:192.168.1.241 and 242
CUBE:192.168.1.10
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
dtmf-interworking rtp-nte
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service h225-notify cid-update
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
fax protocol none
no fax-relay sg3-to-g3
h323
sip
registrar server
localhost dns:bbtb.cyta.com.cy
outbound-proxy dns:sbg.bbtb.cyta.com.cy
no update-callerid
early-offer forced
voice class codec 2
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729br8
codec preference 4 g729r8
voice translation-rule 1
rule 1 /.*\(....\)/ /\1/
voice translation-rule 3
rule 1 /^9/ //
voice translation-rule 4
rule 1 /\+/ /900/
rule 2 /^\(9\)\(.......$\)/ /99\2/
rule 3 /^\(2\)\(.......$\)/ /92\2/
rule 4 /^0/ /90/
rule 5 /^1/ /9001/
rule 6 /^3/ /9003/
rule 7 /^4/ /9004/
rule 8 /^5/ /9005/
rule 9 /^6/ /9006/
rule 10 /^7/ /9007/
rule 11 /^8/ /9008/
rule 12 /^9/ /9009/
rule 13 /^2/ /9002/
voice translation-rule 5
rule 1 // /2232/
rule 2 /^9/ //
voice translation-profile SIP_Incoming
translate calling 4
translate called 1
voice translation-profile SIP_Outgoing
translate calling 5
translate called 3
interface FastEthernet0/0
ip address 192.168.1.10 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
description **SIP TRUNK WITH CYTA**
ip address 10.249.13.130 255.255.255.252
duplex auto
speed auto
interface FastEthernet0/0
ip address 192.168.1.10 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
description **SIP TRUNK WITH CYTA**
ip address 10.249.13.130 255.255.255.252
duplex auto
speed auto
dial-peer voice 889 voip
description **SIP Trunk to CUCM**
destination-pattern 4086
session protocol sipv2
session target ipv4:192.168.1.242:5060
voice-class codec 2
voice-class sip dtmf-relay force rtp-nte
no voice-class sip outbound-proxy
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay sip-notify
no vad
dial-peer voice 890 voip
description **SIP Trunk to CUCM2**
destination-pattern 4086
session protocol sipv2
session target ipv4:192.168.1.241:5060
voice-class codec 2
voice-class sip dtmf-relay force rtp-nte
no voice-class sip outbound-proxy
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay sip-notify
no vad
dial-peer voice 888 voip
description **SIP Trunk to CYTA OUTGOING**
translation-profile incoming SIP_Incoming
translation-profile outgoing SIP_Outgoing
destination-pattern 9T
session protocol sipv2
session target sip-server
incoming called-number .
voice-class codec 2
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
voice service voip
ip address trusted list
ipv4 0.0.0.0 0.0.0.0
dtmf-interworking rtp-nte
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service h225-notify cid-update
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
fax protocol none
no fax-relay sg3-to-g3
h323
sip
registrar server
localhost dns:bbtb.cyta.com.cy
outbound-proxy dns:sbg.bbtb.cyta.com.cy
no update-callerid
early-offer forced
voice class codec 2
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 3 g729br8
codec preference 4 g729r8
voice translation-rule 1
rule 1 /.*\(....\)/ /\1/
voice translation-rule 3
rule 1 /^9/ //
voice translation-rule 4
rule 1 /\+/ /900/
rule 2 /^\(9\)\(.......$\)/ /99\2/
rule 3 /^\(2\)\(.......$\)/ /92\2/
rule 4 /^0/ /90/
rule 5 /^1/ /9001/
rule 6 /^3/ /9003/
rule 7 /^4/ /9004/
rule 8 /^5/ /9005/
rule 9 /^6/ /9006/
rule 10 /^7/ /9007/
rule 11 /^8/ /9008/
rule 12 /^9/ /9009/
rule 13 /^2/ /9002/
voice translation-rule 5
rule 1 // /2232/
rule 2 /^9/ //
voice translation-profile SIP_Incoming
translate calling 4
translate called 1
voice translation-profile SIP_Outgoing
translate calling 5
translate called 3
dial-peer voice 889 voip
description **SIP Trunk to CUCM**
destination-pattern 4086
session protocol sipv2
session target ipv4:192.168.1.242:5060
voice-class codec 2
voice-class sip dtmf-relay force rtp-nte
no voice-class sip outbound-proxy
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay sip-notify
no vad
dial-peer voice 890 voip
description **SIP Trunk to CUCM2**
destination-pattern 4086
session protocol sipv2
session target ipv4:192.168.1.241:5060
voice-class codec 2
voice-class sip dtmf-relay force rtp-nte
no voice-class sip outbound-proxy
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay sip-notify
no vad
dial-peer voice 888 voip
description **SIP Trunk to CYTA OUTGOING**
translation-profile incoming SIP_Incoming
translation-profile outgoing SIP_Outgoing
destination-pattern 9T
session protocol sipv2
session target sip-server
incoming called-number .
voice-class codec 2
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
Hi Aok
I change the default value for IPVMS from g711ulaw to g711alaw but the results remained the same
Also i have restarted the IPVMS
SIP-GW#
SIP-GW#
*Mar 5 14:19:57.854: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK79816bbd4196
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 13:52:31 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.0
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 102 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Session-Expires: 1800;refresher=uac
P-Asserted-Identity:
Remote-Party-ID: ;party=calling;screen=yes;privacy=off
Contact:
Content-Type: application/sdp
Content-Length: 244
v=0
o=CiscoSystemsCCM-SIP 38874 2 IN IP4 192.168.1.241
s=SIP Call
c=IN IP4 0.0.0.0
b=TIAS:64000
b=AS:64
t=0 0
m=audio 24784 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=ptime:20
a=inactive
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
*Mar 5 14:19:57.878: //717/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.249.13.130:5060;branch=z9hG4bK355253C
From: [email protected]>;tag=125E594-5C7
To: [email protected]>;tag=h7g4Esbg_945723725-1362491526714
Date: Tue, 05 Mar 2013 14:19:57 GMT
Call-ID: [email protected]
Route:
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3698592896-0000065536-0000000107-4043417792
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1362493197
Contact:
Expires: 60
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Length: 262
v=0
o=CiscoSystemsSIP-GW-UserAgent 6506 3807 IN IP4 10.249.13.130
s=SIP Call
c=IN IP4 10.249.13.130
t=0 0
m=audio 19234 RTP/AVP 8 101
c=IN IP4 10.249.13.130
a=inactive
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
*Mar 5 14:19:57.878: //716/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK79816bbd4196
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 14:19:57 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
*Mar 5 14:19:57.926: //717/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.249.13.130:5060;branch=z9hG4bK355253C
To: [email protected]>;tag=h7g4Esbg_945723725-1362491526714
From: [email protected]>;tag=125E594-5C7
Call-ID: [email protected]
CSeq: 102 INVITE
Contact:
Require: timer
Session-Expires: 1800;refresher=uac
Content-Type: application/sdp
Content-Length: 213
Allow: ACK, BYE, CANCEL, INVITE, OPTIONS, PRACK, REFER, NOTIFY, UPDATE, INFO
Accept: application/media_control+xml
Accept: application/sdp
Accept: application/x-broadworks-call-center+xml
v=0
o=BroadWorks 96335268 2 IN IP4 10.224.42.164
s=-
c=IN IP4 10.224.42.72
t=0 0
m=audio 54932 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
a=inactive
*Mar 5 14:19:57.942: //716/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK79816bbd4196
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 14:19:57 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact:
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Session-Expires: 1800;refresher=uac
Require: timer
Supported: timer
Content-Type: application/sdp
Content-Length: 259
v=0
o=CiscoSystemsSIP-GW-UserAgent 9410 5774 IN IP4 192.168.1.10
s=SIP Call
c=IN IP4 192.168.1.10
t=0 0
m=audio 19314 RTP/AVP 8 101
c=IN IP4 192.168.1.10
a=inactive
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
*Mar 5 14:19:57.946: //717/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.249.13.130:5060;branch=z9hG4bK3562A4
From: [email protected]>;tag=125E594-5C7
To: [email protected]>;tag=h7g4Esbg_945723725-1362491526714
Date: Tue, 05 Mar 2013 14:19:57 GMT
Call-ID: [email protected]
Route:
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: telephone-event
Content-Length: 0
*Mar 5 14:19:57.946: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK798246ab3597
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 13:52:31 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: presence
Content-Length: 0
*Mar 5 14:19:58.146: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK7983739137ab
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 13:52:31 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.0
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 103 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Session-Expires: 1800;refresher=uac
P-Asserted-Identity:
Remote-Party-ID: ;party=calling;screen=yes;privacy=off
Contact:
Content-Length: 0
*Mar 5 14:19:58.158: //717/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.249.13.130:5060;branch=z9hG4bK3571933
From: [email protected]>;tag=125E594-5C7
To: [email protected]>;tag=h7g4Esbg_945723725-1362491526714
Date: Tue, 05 Mar 2013 14:19:58 GMT
Call-ID: [email protected]
Route:
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3698592896-0000065536-0000000107-4043417792
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 103 INVITE
Max-Forwards: 70
Timestamp: 1362493198
Contact:
Expires: 60
Allow-Events: telephone-event
Content-Length: 0
*Mar 5 14:19:58.158: //716/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK7983739137ab
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 14:19:58 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
*Mar 5 14:19:58.218: //717/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.249.13.130:5060;branch=z9hG4bK3571933
To: [email protected]>;tag=h7g4Esbg_945723725-1362491526714
From: [email protected]>;tag=125E594-5C7
Call-ID: [email protected]
CSeq: 103 INVITE
Contact:
Require: timer
Session-Expires: 1800;refresher=uac
Content-Type: application/sdp
Content-Length: 216
Allow: ACK, BYE, CANCEL, INVITE, OPTIONS, PRACK, REFER, NOTIFY, UPDATE, INFO
Accept: application/media_control+xml
Accept: application/sdp
Accept: application/x-broadworks-call-center+xml
v=0
o=BroadWorks 96335268 3 IN IP4 10.224.42.164
s=-
c=IN IP4 10.224.42.72
t=0 0
m=audio 54932 RTP/AVP 8 18 96 99
a=rtpmap:96 AMR/8000
a=rtpmap:99 telephone-event/8000
a=fmtp:99 0-15
a=ptime:20
a=sendrecv
*Mar 5 14:19:58.234: //716/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK7983739137ab
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 14:19:58 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact:
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-12.x
Session-Expires: 1800;refresher=uac
Require: timer
Supported: timer
Content-Type: application/sdp
Content-Length: 283
v=0
o=CiscoSystemsSIP-GW-UserAgent 9410 5775 IN IP4 192.168.1.10
s=SIP Call
c=IN IP4 192.168.1.10
t=0 0
m=audio 19314 RTP/AVP 8 18 101
c=IN IP4 192.168.1.10
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
*Mar 5 14:19:58.242: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 192.168.1.241:5060;branch=z9hG4bK7985648033f2
From: ;tag=38874~3aaec7ea-69ca-40db-8e65-34e9ff7aa74d-80213498
To: ;tag=125E62C-1354
Date: Tue, 05 Mar 2013 13:52:31 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 103 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 192
v=0
o=CiscoSystemsCCM-SIP 38874 3 IN IP4 192.168.1.241
s=SIP Call
c=IN IP4 192.168.1.241
t=0 0
m=audio 4000 RTP/AVP 8
a=X-cisco-media:umoh
a=rtpmap:8 PCMA/8000
a=ptime:20
a=sendonly
*Mar 5 14:19:58.262: //717/DC740C800000/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.249.13.130:5060;branch=z9hG4bK358582
From: [email protected]>;tag=125E594-5C7
To: [email protected]>;tag=h7g4Esbg_945723725-1362491526714
Date: Tue, 05 Mar 2013 14:19:58 GMT
Call-ID: [email protected]
Route:
Max-Forwards: 70
CSeq: 103 ACK
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Length: 259
v=0
o=CiscoSystemsSIP-GW-UserAgent 6506 3808 IN IP4 10.249.13.130
s=SIP Call
c=IN IP4 10.249.13.130
t=0 0
m=audio 19234 RTP/AVP 8 99
c=IN IP4 10.249.13.130
a=sendonly
a=rtpmap:8 PCMA/8000
a=rtpmap:99 telephone-event/8000
a=fmtp:99 0-15
a=ptime:20
SIP-GW#
SIP-GW#sh voip rtp connections
VoIP RTP active connections :
No. CallId dstCallId LocalRTP RmtRTP LocalIP RemoteIP
1 716 717 19314 4000 192.168.1.10 192.168.1.241
2 717 716 19234 54932 10.249.13.130 10.224.42.72
Found 2 active RTP connections
Similar Messages
-
Unable to use iTunes for about a month on my PC
Have PC with windows 7 (64)
Own an iPad2, which is working with no problems
When I try to install iTunes it repeatedly fails via "Roll back" Tells me to reinstall, which does not work.
Tried latest update iTunes 11, same problem
Prepared to uninstall iTunes and start all over again, but how do I do this?hi mate i think i may have just solved this for you. had the same problem as you, i uninstalled all apple products and quicktime and safari, did a disk clean up and deleted old restore points(might not need to but did it anyway) downloaded itunes from explorer and managed to install the new itunes 11 wooohooooo hope this helps buddy
-
Last night I bought Adobe XI Pro and this morning the serial number does not work.
Last night I bought Adobe XI Pro and this morning the serial number does not work. [removed by moderator]
You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/ -
My Itunes account was hacked and my Apple ID was disabled. I followed the instructions from APPLE to backup and restore from Itunes but that did not work. Any suggestions?? Thanks!!
Are you saying that you contacted Apple support and they instructed you to backup and restore your iPad? Or do you mean that you picked up this information from an online support article? If you spoke to an Apple rep or received these instructions via email, contact them again for further help.
I fail to see how restoring your iPad would enable yoyr Apple ID. -
I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?
IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.
-
I am signed into the App Store on my iphone 4 and one of my apps need updating and my brother is signed into it because I didn't have any credit to make an ID so he signed in so I could download apps but its like its locked to his Apple ID I have tried signing out and turning my phone off its just not working please help.
Apps are locked to the Apple ID that was used to download them. You will have to sign in as your brother in order to update it.
-
I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?
If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
If your new TV has a conventional VGA in and stereo inputs you can try this connector.
http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
It won't be high resolution, but it will get you picture from iPad to TV.
Good Luck. -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
I updated my ad to iOS 6 and now my App Store app does not work, how can I get it back
I updated my iPad 2 with the latest iOS 6 and now my App Store application does not work right. The only part that does work is the genius, and the purchased, but I cannot search for any new apps now have the categories come up. I don't know how else to search for apps, and I don't know how to download this as it was pre installed.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off". -
Firefox did an automatic update to 6.01, and now my middle mouse button is not working in the browser. It doesn't close tabs, it doesn't open new tabs by middle clicking a link, it doesn't allow me to middle click to scroll the page..
[BUG FIXED, see "EDIT 2" at the end of my post]
I'm on Firefox 3.6.21, and I got this problem today after a Greasemonkey update (To version 0.9.10, apparently).
Disabling Greasemonkey solved the problem, and re-enabling it reproduced the problem (middle-clicking links to open in new tab did not work, merely highlighted the link).
I should also note that while Greasemonkey was enabled and the bug was affecting me, Ctrl+Click to open links in new tabs was also broken.
I hope this helps!
EDIT: It appears this is a known incompatibility/conflict bug between current versions of Greasemonkey and Tab Mix Plus. Read more here:
https://github.com/greasemonkey/greasemonkey/issues/1406
EDIT 2: GREASEMONKEY HAS NOW BEEN UPDATED with a workaround to fix the problem. Go to https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/versions/ to install the update manually. It hasn't been reviewed by Mozilla yet, so it won't be an automatic update for another day or two. All credit to "cannonfodder" below for noticing this; please mark his post as helpful! -
what key(s) do it type to change language from english to other? i am writing a story in dual languages. I was told to click command and space bar together but it is not working.
Command Spacebar opens Spotlight as you have found out. If you want to change languages you need to say what app you are using to write the story in, I'm guessing you are using Pages or MS Word. If that's the case
Pages: Open Inspector - Click the T tab - Click Language and change your language.
MS Word: Tools Menu - Language - Choose your language. -
My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it. -
I have brought a iPhone 5s and installed software but my bluetooth is not working. Please help me
What are you trying to connect the iPhone to and what is happening when you try?
-
Help....
Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
Restored 10.6.7 and printers from Install CD's but not working.
Same with F2100 scanner
Am I glad I kept Windows desktop as without it I would be scre**ed now
What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
SteveNone of those things you mentioned were what I suggested.
I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
But, if HP has a fix, it likely needs to update its drivers. -
This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.iOS: Unable to update or restore
Maybe you are looking for
-
IChat doesn't work properly after upgrading to 10.7.2
It just doesn't connect to my gmail chat account. No error message or anything. It just sits there with that " ~ " symbol near where it says "offline". What to do? Trying to connect / disconnect doesn't do anything.
-
How do I copy photos from photostream to camera roll in IOS 5,
How do I copy photos (folders) from photo stream into my camera roll in IOS 5
-
ATI RADEON X1900 XT GRAPHICS UPG KIT
Hi all, I was wondering if the Mac Pro ATI RADEON X1900 XT GRAPHICS UPG KIT compatible with the G5. I ordered two of these cards one for my office computer and home studio computer. But i also have a G5 i use.
-
I am new in VOIP. i don't have much idea about voip. In my university i have cisco equipments. Can anyone send me a simple voip lab. Like; with 2 IP phone, 2 cisco switches and 2 router... thats i have.. waiting for any gud like or information where
-
Hi, Iam trying to upload excel file using particular transaction with delibrately made mistake in one of the WBS element to generate error so,this is the error in Development: No. of project sections does not agree with project mask "-XX.XXX.XXXX.XXX